psoc4: support for Cypress PSoC 41xx/42xx family
[openocd.git] / tcl /
2015-02-11 Tomas Vanekpsoc4: support for Cypress PSoC 41xx/42xx family 82/2282/6
2015-02-04 Paul Fertserflash/nor/stm32lx: use 0 base to autodetect second... 03/2503/2
2015-02-02 Uwe BonnesAdd more STM32F3 IDs in target/stm32f3.cfg. 35/2435/3
2015-01-30 Paul Fertsertcl/target: add lpc8xx.cfg 64/2464/4
2015-01-26 Paul Fertsertcl/board: frdm kinetis boards have SRST connected 62/2462/2
2015-01-26 Paul Fertsertcl/target/stellaris: Snowflake supports SYSRESETREQ too 61/2461/2
2015-01-26 Paul Fertsertcl/target: consolidate Kinetis configs 60/2460/2
2015-01-26 Thomas Eichingertcl/board: Add ST NUCLEO L152RE configuration 89/2489/3
2015-01-26 Paul Fertsercfg: add srst_nogate to the supported targets, remove... 59/2459/3
2015-01-26 Uwe Bonnesstm32f4/nucleo: Use only one configuration for all... 97/2397/4
2015-01-26 Uwe Bonnesstm32f0/nucleo: Use only one configuration for all... 96/2396/4
2015-01-15 Karl Palssontarget/stm32xx: Endian is not configurable. 46/2446/2
2015-01-15 Paul Fertsertcl/interface/ftdi: add config for the IoT-LAB adapter 15/2415/2
2015-01-15 Andreas Färbertcl/board: Add TI TMDX570LS20SUSB board config 40/2440/2
2015-01-15 Karl Palssoncfg: stm32l1: Use specific chipname 47/2447/2
2015-01-09 Spencer Olivercfg: fix lpc17xx regression 84/2384/2
2014-12-03 Karl Palssonstm32l: split l0/l1 support no jtag, different HSI... 05/2405/2
2014-12-03 Juha Niskanenstm32: Fix L0/1xx CPUTAPID setting and add new L1xx... 76/2376/2
2014-11-24 Uwe Bonnestcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz... 83/2383/2
2014-11-24 Uwe Bonnestcl/target/stm32f4x: add F401 and F411 IDs 79/2379/3
2014-11-02 Paul Fertsertcl/interface/ftdi/swd-resistor-hack: clarify and add... 57/2357/2
2014-10-16 Spencer Olivercmsis-dap: add serial number support 29/2329/3
2014-10-06 Spencer Olivercfg: remove incorrect execute permissions 33/2333/2
2014-10-06 Rémi PRUD'HOMMEstm32: Add config file for a new board STM32L052 dsicovery 17/2317/4
2014-10-06 Rémi PRUD'HOMMEstm32: add L0xx CPUTAPID 15/2315/4
2014-10-06 Paul Fertserinterface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control... 86/2286/4
2014-09-29 Karl Palssontcl/board: add TI Tiva C ek-tm4c1294xl config 63/2063/5
2014-09-22 Andreas Fritiofsontarget: Remove "-variant" argument 83/2283/2
2014-09-22 Austin PhillipsSupport hla_serial command for ST-LINK adapters. 98/2198/8
2014-09-15 Nemui Trinomiuscfg: Added Nucleo-F411RE board config. 59/2259/2
2014-09-15 Paul Fertsertcl/board/sheevaplug: add adapter_khz setting 66/2266/2
2014-09-11 Paul Fertsertcl/interface/ftdi/sheevaplug: fix device description 65/2265/2
2014-09-08 Vanya Sergeevcfg: refactor lpc1xxx targets onto one base config 60/1960/13
2014-09-08 Бурага Александрtcl/target: add config for К1879ХБ1Я, a hybrid ARM11... 72/2272/2
2014-09-08 Paul Fertsertcl/interface/ftdi: fix TRST for Olimex TINY adapters 47/2247/2
2014-09-08 Paul Fertsertcl/interface/ftdi: add kt-link config (with SWD) for... 69/2269/2
2014-09-08 Paul Fertsertcl/target/imx6: add yet another SJC tapid 53/2253/3
2014-08-19 Paul Fertsertcl/interface/ftdi: auto-select SWD from converters... 48/2248/2
2014-08-19 Eldar Khayrullintcl/board/stm32ldiscovery: fix breakage 55/2255/2
2014-08-11 Andrey Smirnovtcl/board: Add board configuration for nRF51822-mKIT 16/2116/7
2014-08-11 Angus GrattonnRF51822: Add workaround for PAN-16 where not all RAM... 02/2202/4
2014-08-11 Andrey Skvortsovtcl/target: added support for TI OMAP/AM 3505 and 3517 27/2127/3
2014-08-11 Paul FertserAllow transports to override the selected target (hla... 64/1664/11
2014-08-04 Andreas Fritiofsoninterface/ftdi: Mark flyswatter.cfg as tested 37/2237/2
2014-08-02 Paul Fertsertcl/board: fix all the remaining boards that were sourc... 30/2230/2
2014-07-10 Fredrik Hederstiernatcl/board: add STM32429I-EVAL and STM32439I-EVAL dev... 71/2171/3
2014-07-10 Paul Fertsertcl/target/stm32l: restore slow clock on reset 88/2188/3
2014-07-10 Thomas SchmidAdding support for the Atmel SAMR21. 94/2194/3
2014-07-08 Andreas Fritiofsoncfg: Rename leftover cortex_a8 -> cortex_a 97/2197/2
2014-06-28 Spencer Olivercfg: add SWD configs for stellaris ftdi based adapters 85/2185/3
2014-06-28 Paul Fertsertcl/interface/ftdi: add SWD configs for kt-link, olimex... 84/2184/6
2014-06-28 Paul Fertserjtag/drivers/ftdi: require defining SWD_EN signal for... 83/2183/6
2014-06-28 Paul FertserAuto-select JTAG transport when appropriate 79/2179/2
2014-06-28 Andreas Fritiofsoncfg: Add SWD support to JTAG-lock-pick Tiny 2 36/2136/4
2014-06-28 Andrey Smirnovcortex_m: Do additional initialization during reset 88/2088/8
2014-06-28 Paul Fertsertcl: introduce using_(jtag|swd|hla) helpers and use... 03/2003/8
2014-06-22 Paul Fertsertcl/target/fm3.cfg: use a CHIPNAME known by the flash... 60/2160/2
2014-06-22 Franck Jullienopenrisc: add support for JTAG Serial Port 62/2162/3
2014-06-22 Tom Rinitcl/target/am335x.cfg: Drop gdb-attach stanza 68/2068/2
2014-06-19 Nemui Trinomiuscfg: Added Nucleo-F334R8 board config. 75/2175/3
2014-06-18 Marco Cruztcl/board: add Atmel SAM4E-EK 58/2158/5
2014-06-01 Paul Fertsertcl/target/kl25.cfg: add maximum speed specification 20/2120/3
2014-06-01 Paul Fertsertcl: add ASUS RT-N66U config 53/2153/5
2014-05-16 Yegor YefremovKS869x: add new target 25/2125/4
2014-05-10 Andrey Smirnovkinetis: Revise CPU un-securing code 34/2034/8
2014-05-05 Andrey Smirnovgeneralplus: Add configuration file for General Plus... 58/2058/4
2014-05-05 Ash CharlesAdd support for Gumstix AeroCore device 17/2117/4
2014-04-14 Seth LaForgecortex_a: fix endiannes issues on TI TMS570 64/2064/9
2014-04-14 Lee Bowyertcl: bcm6348 target config, BT HomeHub v1 board config 97/2097/2
2014-03-29 Paul Fertsertcl/target: make milandr configs swd-compatible 62/1962/2
2014-03-29 Andrey Smirnovnrf51: Add UICR writing support 13/2013/10
2014-03-29 Franck Julliencfg: or1k_generic: allow TAP_TYPE override 56/2056/2
2014-03-29 Tim Sandertcl: add Zynq-7000 target and Zedboard board configs 61/2061/5
2014-03-29 Felipe Balbicfg: add TI am43xx devices 47/2047/4
2014-03-17 Jens Hoffmanncfg: Added st nucleo board configs. 22/2022/4
2014-03-17 Felipe Balbitcl: target: icepick: add icepick_d_tapenable procedure 30/2030/2
2014-03-17 Paul Fertsertcl/interface/ftdi: add Digilent JTAG-SMT2 config 29/2029/3
2014-03-17 Spencer Olivercfg: change default SAM4L cortex_m reset_config 95/1995/2
2014-03-17 Jörg WunschMake the Atmel SAM3 family SWD-aware 46/2046/2
2014-03-17 Paul Fertsertcl/board: add config for DP Bus Blaster reconfiguration 36/2036/3
2014-03-17 Bartosz Bielawskistlink_usb.c: add support for STLink V2-1 19/2019/6
2014-03-09 Tim Krygerbcm281xx: Add bcm281xx SoC and bcm28155_ap board 26/1926/4
2014-03-09 Tom Riniinterface/ftdi/xds100v2.cfg: Add another VID/PID, drop... 16/2016/2
2014-03-07 Tom Rinicfg: Switch ti_beaglebone to new ftdi interface 17/2017/2
2014-03-04 Andrey YurovskyAdd support for the Atmel SAMG53 74/1974/2
2014-02-24 Andrey Smirnovnrf51: Implement the support for Nordic's nRF51 devices 45/1945/11
2014-02-24 Fatih Aşıcıcfg: Make stm32f4x usable with SWD transport 51/1951/2
2014-02-11 Adrian Burnsquark_x10xx: add new target quark_x10xx 29/1829/4
2014-02-11 Paul Fertserinterface/ftdi/xds100v2.cfg: default to reset state... 84/1884/3
2014-02-04 Paul Fertserinterface/ftdi: add TUMPA Lite config 18/1918/2
2014-01-29 Spencer Olivercfg: LPC17xx default to using SYSRESETREQ to reset... 92/1892/2
2014-01-20 Franck Jullienjtag/drivers: add USB-Blaster II 91/1791/8
2014-01-20 Spencer Olivercfg: add Freescale FRDM-KL46Z Board 66/1866/2
2014-01-15 Andrey YurovskyAtmel samd: add support for SAMD21 73/1873/2
2014-01-09 Andrey Yurovskyadd support for Atmel SAMD NOR Flash 84/1684/8
2014-01-09 Andrey Yurovskyadd support for Atmel SAM4L NOR Flash 39/1639/13
2014-01-09 Spencer Olivercfg: add initial Atmel xplained kit support 25/1625/9
2014-01-09 Spencer Olivercfg: add stm32 cmsis-dap compliant config 43/1543/16
2014-01-09 Spencer Olivercmsis-dap: add initial cmsis-dap support 42/1542/19
2014-01-08 Paul Fertsertcl/netgear-dg834v3.cfg: add to easy firmware recovery... 51/1851/5
next