openocd.git
7 years agotarget: rewrite working area allocator
Andreas Fritiofson [Mon, 13 Feb 2012 00:18:24 +0000 (01:18 +0100)]
target: rewrite working area allocator

The existing allocator couldn't reuse a freed allocation if the sizes
didn't match exactly. That led to problems when for example a flash write
routine had allocated all of the working area to speed up operation. A
subsequent verify pass couldn't allocate space for the checksum algorithm
even though all previous allocations had been freed.

This allocator is marginally more complex, but solves the above problem by
splitting larger free areas to fulfill smaller requests and by merging
released areas into adjacent free areas.

An initial free area, covering the entire specified address range, is set
up on first allocation, and all allocations are split off from (and
ultimately merged into) that one. It can also easily be adapted to support
several disjoint working areas for the same target, by setting up several
initial free areas and slightly modifying the merge code.

Change-Id: I6faaf9801312bb19a4fa4474694a0cd1c6e0ab54
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/445
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: enable stm32f2x SYSRESETREQ support
Spencer Oliver [Mon, 20 Feb 2012 11:39:12 +0000 (11:39 +0000)]
cfg: enable stm32f2x SYSRESETREQ support

The stm32 family supports using SYSRESETREQ as a software reset, lets
use it.

Change-Id: I171ffa8d888a2d0c28b266051030311521e9bca9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/472
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
7 years agostlink: support expected-id 0
Spencer Oliver [Tue, 21 Feb 2012 10:41:39 +0000 (10:41 +0000)]
stlink: support expected-id 0

This brings the stlink driver inline with the rest of OpenOCD.

If the user configures the tap as -expected-id 0 then the IDCODE will be
treated as a wildcard and ignored.

Change-Id: I99160c69b2b40f5b1f608bb59ab6630894502fd8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/476
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
7 years agodocs: fix more texinfo warnings
Spencer Oliver [Tue, 21 Feb 2012 10:34:48 +0000 (10:34 +0000)]
docs: fix more texinfo warnings

A period or comma must follow the closing brace of an @xref.

Change-Id: Ida5dc3600eca328d95b0a8f6b5c9fe0a0f3ba820
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/475
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
7 years agoSometime in the past, nand_fileio_finish started to return ERROR_OK (with the value...
Stian Skjelsad [Sat, 18 Feb 2012 14:29:20 +0000 (15:29 +0100)]
Sometime in the past, nand_fileio_finish started to return ERROR_OK (with the value of zero) on success.

Change-Id: Ifb743c1617e2a6071a87c901fae8165969efcdbf
Signed-off-by: Stian Skjelstad <stian@nixia.no>
Reviewed-on: http://openocd.zylin.com/468
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agostlink: add error status check
Mathias K [Fri, 17 Feb 2012 12:41:27 +0000 (13:41 +0100)]
stlink: add error status check

This patch add the status check.

Change-Id: I0fdb9bf66dad5ae416c7aa4c6e19116f846571f9
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/463
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoFix Typo in cfg file
Jonathan Dumaresq [Fri, 17 Feb 2012 13:24:35 +0000 (08:24 -0500)]
Fix Typo in cfg file

Change-Id: Id91ef70988212185f9ec653cbf5dc4e1defb1b9e
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-on: http://openocd.zylin.com/464
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoFix typo that result in recursion.
Mathias K [Thu, 16 Feb 2012 17:00:07 +0000 (18:00 +0100)]
Fix typo that result in recursion.

Change-Id: Ie1102b4960bcb5acb254eae69b94fe87ab33dd0b
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/462
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agostlink: add arm semi-hosting support
Spencer Oliver [Tue, 14 Feb 2012 15:34:03 +0000 (15:34 +0000)]
stlink: add arm semi-hosting support

Change-Id: Ib275d451a9201580f08ced090e50cf45eb3ab3e2
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/459
Tested-by: jenkins
7 years agocfg: change default stellaris working area
Spencer Oliver [Tue, 14 Feb 2012 14:20:51 +0000 (14:20 +0000)]
cfg: change default stellaris working area

This sets the default stellaris working area to 2k rather than
the current 8k. 2K is the smallest RAM size in the stellaris family.

Change-Id: I1407f758eb0926cc094b824a6d25199b313c45de
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/458
Tested-by: jenkins
7 years agodocs: fix texinfo warnings
Spencer Oliver [Tue, 14 Feb 2012 11:16:34 +0000 (11:16 +0000)]
docs: fix texinfo warnings

A period or comma must follow the closing brace of an @xref.

Change-Id: I272f1e7fac8f1fee4844f485b0b8e2e4e9cf352d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/456
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agobuild: fix automake 1.11.2 issues
Spencer Oliver [Tue, 14 Feb 2012 12:57:18 +0000 (12:57 +0000)]
build: fix automake 1.11.2 issues

automake 1.11.2 throws `pkglibdir' is not a legitimate directory for `DATA'
if nobase_dist_pkglib_DATA is used.

We work around this issue by defining our own location.

Change-Id: I3c29e2df0b67e745283c50d358e31699bd60dc74
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/457
Tested-by: jenkins
7 years agoAdd stm32f0x target
Jonathan Dumaresq [Tue, 7 Feb 2012 14:53:22 +0000 (09:53 -0500)]
Add stm32f0x target

Change-Id: I4abfef4459b7e2780d17bdd7623fd1ef797cc8ea
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-on: http://openocd.zylin.com/437
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAdd stm32f0x probe and info working
Jonathan Dumaresq [Tue, 7 Feb 2012 14:55:34 +0000 (09:55 -0500)]
Add stm32f0x probe and info working

I used the CPUID instead of adding a new argument to the flash bank command
Fixed Type in comments

Add the failsafe return value in device_id
Change-Id: Ieb5a46fc002b5390a0c81bc8b49f6c687036ae1d
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-on: http://openocd.zylin.com/438
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAdd bootloader mode.
Mathias K [Thu, 16 Feb 2012 08:18:40 +0000 (09:18 +0100)]
Add bootloader mode.

This patch add the bootloader define.

Change-Id: I280a8a35c3514910dd381de3ab8ad59c9bd74ca1
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/455
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoflash: fix incorrect stm32f2x/stm32f4x flash size register
Spencer Oliver [Mon, 13 Feb 2012 16:37:22 +0000 (16:37 +0000)]
flash: fix incorrect stm32f2x/stm32f4x flash size register

The ref manuals for the stm32f2x (RM0033 Rev4) and stm32f4x (RM0090 rev1)
are unclear to the address of the flash size register (F_ID).

According to contacts @ ST this is the correct address, the manuals will be
updated in due coarse.

Change-Id: If9fb83b3100458d17038cf27c2b23355e1dc5a9e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/448
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
7 years agodocs: correct small typo
Spencer Oliver [Mon, 13 Feb 2012 11:11:02 +0000 (11:11 +0000)]
docs: correct small typo

Change-Id: I5e8bea591274b4032d3e04c4be7e9110138d5bc2
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/447
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
7 years agoadd icnova_sam9g45_sodimm support
Lars Poeschel [Wed, 26 Oct 2011 14:52:53 +0000 (16:52 +0200)]
add icnova_sam9g45_sodimm support

This adds support for in-circuit icnova sam9g45 sodimm: http://www.ic-board.de/product_info.php?info=p214_ICnova-SAM9G45-SODIMM.html|ICnova
The NAND flash is not yet working.

Change-Id: I94ca5203f8d8a55dec1e4e87cd0631bd2b8393f9
Signed-off-by: lars@kiwigrid.com
Reviewed-on: http://openocd.zylin.com/418
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotopic: Add support for i.MX28EVK
James Robinson [Sun, 5 Feb 2012 02:06:42 +0000 (21:06 -0500)]
topic: Add support for i.MX28EVK

Added the file imx28.cfg to the target directory
Added the file imx28evk.cfg to the board directory

Change-Id: I02a74a03f3773892f830d13660ffdded34f3261d
Signed-off-by: James Robinson <jmr13031@gmail.com>
Reviewed-on: http://openocd.zylin.com/428
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAdd init_board documentation
Freddie Chopin [Thu, 9 Feb 2012 17:37:05 +0000 (18:37 +0100)]
Add init_board documentation

This patch adds init_board concept information to OpenOCD manual.
Additionally a link from init_targets chapter to new chapter about
init_board is added.

Change-Id: I09b9aaa1cf68b94f35701224f641cae9811a5bcf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/440
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: add revb ek-lm3s811 board config
Spencer Oliver [Fri, 10 Feb 2012 16:16:04 +0000 (16:16 +0000)]
cfg: add revb ek-lm3s811 board config

Add board config for older (revb) ek-lm3s811

Change-Id: I75aca1714de3e88b60d00fa0f99f2c4b076b569c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/444
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
7 years agocfg: fix incorrect STM32L SW-DP id
Spencer Oliver [Fri, 10 Feb 2012 11:03:05 +0000 (11:03 +0000)]
cfg: fix incorrect STM32L SW-DP id

STM32L ref manual (RM00038 Rev5) states the SW-DP id should be 0x4ba00477.
The correct value from silicon is 0x2ba01477 - the typo has been confirmed by ST.

Change-Id: Ie35a1f13dc5dedc1b148fb219c6974bfa48b537c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/441
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
7 years agocfg: add stm32ldiscovery board config
Spencer Oliver [Fri, 10 Feb 2012 11:04:11 +0000 (11:04 +0000)]
cfg: add stm32ldiscovery board config

Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/442
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
7 years agocfg: add ST-LINK TRANSPORT config override
Spencer Oliver [Fri, 10 Feb 2012 12:29:31 +0000 (12:29 +0000)]
cfg: add ST-LINK TRANSPORT config override

This enables the user to override the transport used for st-link.
If JTAG is selected it will also change the default id used to the JTAG id
rather than the SW-DP id.

Change-Id: I4fe352e4932e2f4ec278168e99ba2d2d50fd850a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/443
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
7 years agoAdd init_board procedure executed after init_targets
Freddie Chopin [Fri, 3 Feb 2012 19:37:45 +0000 (20:37 +0100)]
Add init_board procedure executed after init_targets

This adds init_board procedure that behaves exactly the same as
init_targets - it can be overriden by "next level" scripts. This
procedure is executed after init_targets, allowing common stuff (jtag
chain, memory, flash, ...) to be configured in target script (via
init_target) and leaving rest (like additional memory, reset
configuration, reset-init handlers, ...) to be done in init_board.

This makes init_targets scheme more complete and easier to use - current
board scripts will not need new init_targets, because everything can be
"packed" in init_boards. Moreover it solves the problem of variables
being set in init_targets (executed after init), which were not
accessible by "linear" scripts (parsed before init). All that has to be
done is to enclose all code in board config file in init_board
procedure.

Change-Id: I0736b1ff9873a687966407d62b58ccf29a8e597b
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/427
Reviewed-by: Chris Morgan <chmorgan@gmail.com>
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
7 years agoAdd missing init_targets documentation
Freddie Chopin [Thu, 9 Feb 2012 16:50:42 +0000 (17:50 +0100)]
Add missing init_targets documentation

Add init_targets procedure documentation to OpenOCD manual explaining
the concept.

Change-Id: I82933ed90397cbcdc5c72801182573ca69b1d265
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/439
Reviewed-by: Chris Morgan <chmorgan@gmail.com>
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
7 years agocfg: add stm32vldiscovery board config
Spencer Oliver [Mon, 6 Feb 2012 13:13:08 +0000 (13:13 +0000)]
cfg: add stm32vldiscovery board config

Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/432
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agodocs: add original stlink (STLINK-V1) usage note
Spencer Oliver [Mon, 6 Feb 2012 14:54:00 +0000 (14:54 +0000)]
docs: add original stlink (STLINK-V1) usage note

Add a note to the docs about the original stlink being broken under linux.

Change-Id: Ib440d78e5c7d31eeace99f611a76fcf701bfb8bc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/433
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agoExport _TARGETNAME from generic LPC2xxx script
Freddie Chopin [Wed, 1 Feb 2012 22:10:56 +0000 (23:10 +0100)]
Export _TARGETNAME from generic LPC2xxx script

Make _TARGETNAME variable global so it could be used by scripts sourcing it.

Change-Id: Iaf1c3b53875734658b1b8f136c9bb958988b56bf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/421
Tested-by: jenkins
Reviewed-by: Chris Morgan <chmorgan@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agodoxygen: use correct comment syntax
Spencer Oliver [Mon, 6 Feb 2012 11:27:04 +0000 (11:27 +0000)]
doxygen: use correct comment syntax

This issue was caused by uncrustify not correctly converting the doxygen
comments.

Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Change-Id: Ie6dc3b057a08603b670cb27312e5f0d989426e6c
Reviewed-on: http://openocd.zylin.com/431
Tested-by: jenkins
7 years agobuild: cleanup src/target directory
Spencer Oliver [Sun, 5 Feb 2012 12:03:04 +0000 (12:03 +0000)]
build: cleanup src/target directory

Change-Id: Ia055b6d2b5f6449a38afd0539a8c66e7d7e0c059
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/430
Tested-by: jenkins
7 years agobuild: cleanup src/jtag/drivers directory
Spencer Oliver [Thu, 2 Feb 2012 15:08:51 +0000 (15:08 +0000)]
build: cleanup src/jtag/drivers directory

Change-Id: I99c08ec0132d5a15250050e718310f1ddd9fe546
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/425
Tested-by: jenkins
7 years agocheckpatch: remove __packed and __aligned checks
Spencer Oliver [Thu, 2 Feb 2012 11:16:39 +0000 (11:16 +0000)]
checkpatch: remove __packed and __aligned checks

These checks are specific to linux kernel.

Change-Id: Ia9b837b5609922a897822f1d55f96f04c0f1f838
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/424
Tested-by: jenkins
7 years agobuild: cleanup src/jtag directory
Spencer Oliver [Thu, 2 Feb 2012 15:13:13 +0000 (15:13 +0000)]
build: cleanup src/jtag directory

Change-Id: I7caf57ca3d9dfbe152504472a6bb26c2a28b92e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/423
Tested-by: jenkins
7 years agocheckpatch: increase line length to 120
Spencer Oliver [Thu, 2 Feb 2012 15:00:06 +0000 (15:00 +0000)]
checkpatch: increase line length to 120

Change-Id: I963385d0a4880f2b1e55208c8dfe65c1870ac6e1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/422
Tested-by: jenkins
7 years agobuild: cleanup src/flash/nor directory
Spencer Oliver [Tue, 31 Jan 2012 17:55:03 +0000 (17:55 +0000)]
build: cleanup src/flash/nor directory

Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/420
Tested-by: jenkins
7 years agobuild: cleanup src/flash/nand directory
Spencer Oliver [Tue, 31 Jan 2012 11:07:53 +0000 (11:07 +0000)]
build: cleanup src/flash/nand directory

Change-Id: I21bb466a35168cf04743f5baafac9fef50d01707
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/419
Tested-by: jenkins
7 years agobuild: cleanup src/flash directory
Spencer Oliver [Mon, 30 Jan 2012 16:38:09 +0000 (16:38 +0000)]
build: cleanup src/flash directory

Change-Id: I33c32a884095cff139546f760bc8fa6586e8c5b0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/417
Tested-by: jenkins
7 years agobuild: cleanup src/rtos directory
Spencer Oliver [Mon, 30 Jan 2012 15:32:53 +0000 (15:32 +0000)]
build: cleanup src/rtos directory

Change-Id: I24bc62d12409dbfc20a0a986acf6b3f2c913e36d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/416
Tested-by: jenkins
7 years agobuild: cleanup src/helper directory
Spencer Oliver [Mon, 30 Jan 2012 14:31:21 +0000 (14:31 +0000)]
build: cleanup src/helper directory

Change-Id: I71a312df783995e9083c345c25e73902d5aef59e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/415
Tested-by: jenkins
7 years agocheckpatch: remove volatile check
Spencer Oliver [Mon, 30 Jan 2012 13:51:52 +0000 (13:51 +0000)]
checkpatch: remove volatile check

We may enable this again - but at the moment is causing extra issues
with reformatting the codebase.

Change-Id: I5a2aaaa32ad784e011dff3079ff45501452c1819
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/414

7 years agocheckpatch: remove typedef check
Spencer Oliver [Mon, 30 Jan 2012 13:15:08 +0000 (13:15 +0000)]
checkpatch: remove typedef check

We may enable this again - but at the moment is causing extra issues
with reformatting the codebase.

Change-Id: Ic64310a20605a0ef3206caa15c8e6c8ee655bfda
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/413
Tested-by: jenkins
7 years agobuild: cleanup src/server directory
Spencer Oliver [Mon, 30 Jan 2012 12:05:19 +0000 (12:05 +0000)]
build: cleanup src/server directory

Change-Id: I6410df28c5999f5cbee2d3bcaa02469a29ea4c15
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/412
Tested-by: jenkins
7 years agobuild: cleanup src/transport directory
Spencer Oliver [Fri, 27 Jan 2012 17:05:35 +0000 (17:05 +0000)]
build: cleanup src/transport directory

Change-Id: If73da1a7272602314f042c3e3c0e61050530998d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/411
Tested-by: jenkins
7 years agobuild: cleanup src/xsvf directory
Spencer Oliver [Fri, 27 Jan 2012 16:47:48 +0000 (16:47 +0000)]
build: cleanup src/xsvf directory

Change-Id: I5325980b240fba841d8cce81985f4da369ad9052
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/410
Tested-by: jenkins
7 years agobuild: cleanup src/svf directory
Spencer Oliver [Fri, 27 Jan 2012 16:46:42 +0000 (16:46 +0000)]
build: cleanup src/svf directory

Change-Id: If9186964e2597f8ca1f01885fc28418df7d92964
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/409
Tested-by: jenkins
7 years agobuild: cleanup src/pld directory
Spencer Oliver [Fri, 27 Jan 2012 16:45:29 +0000 (16:45 +0000)]
build: cleanup src/pld directory

Change-Id: I9edb027c76e5d7fe21d557a11e6a9691fa581e86
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/408
Tested-by: jenkins
7 years agobuild: cleanup src/ directory
Spencer Oliver [Fri, 27 Jan 2012 16:44:06 +0000 (16:44 +0000)]
build: cleanup src/ directory

Change-Id: Ia6ed99ce75625ad6ef5e0d3c3bbdc1c1bec21df3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/407
Tested-by: jenkins
7 years agobuild: update uncrustify config
Spencer Oliver [Sun, 5 Feb 2012 11:24:04 +0000 (11:24 +0000)]
build: update uncrustify config

This config has been updated for 0.59

Change-Id: If0dc87dd5de052c1228743a196a3198dbd4bc279
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/406
Tested-by: jenkins
7 years agoSTLINK: add check for the supported jtag API version
Mathias K [Sun, 29 Jan 2012 16:42:40 +0000 (17:42 +0100)]
STLINK: add check for the supported jtag API version

This patch add a validation for the supported jtag api version.

Change-Id: I0b51350e58e351d6662f4039c0a9e9d0d79ba4ec
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/405
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agostm32f1x: fix bug in flash loader and restrict instruction set to armv6-m
Andreas Fritiofson [Wed, 25 Jan 2012 00:10:24 +0000 (01:10 +0100)]
stm32f1x: fix bug in flash loader and restrict instruction set to armv6-m

Correct the offset to the read pointer when clearing it on error.

Also restrict the instruction set to armv6-m so the flash driver can be
used on Cortex-M0 parts with the same flash controller.

Change-Id: I380f9dabcc41fb6e4d43a7e02f355e2381913f39
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/399
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotarget: increase chunk size in dump_image
Andreas Fritiofson [Sat, 28 Jan 2012 01:35:57 +0000 (02:35 +0100)]
target: increase chunk size in dump_image

Replace the big stack-allocated buffer with a much bigger heap-allocated.
There was no explanation for the apparently arbitrary chunk size, and
performance was improved by increasing it, leveling out at about 4k.

Change-Id: I3b06d4469092ec8d89d0ce05bff0b7cf213c5062
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/404
Tested-by: jenkins
Reviewed-by: Marti Bolivar <mbolivar@leaflabs.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agoSTLINK: add stlink v1 configuration
Mathias K [Mon, 23 Jan 2012 19:06:01 +0000 (20:06 +0100)]
STLINK: add stlink v1 configuration

Change-Id: I6b9de16879ff928d60e3c4a64731449275291cc2
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/397
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoSTLINK: Test device version (v1/v2) on usb transfers and add sg support
Mathias K [Wed, 25 Jan 2012 08:35:13 +0000 (09:35 +0100)]
STLINK: Test device version (v1/v2) on usb transfers and add sg support

This patch test the device version and differentiate between
v1 and v2 devices.

Change-Id: Ie79bf2c5534211493b004329fb6d5b9d4ea5453b
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/396
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoSTLINK: swd transport renamed and jtag+swim transport added
Mathias K [Wed, 25 Jan 2012 08:30:45 +0000 (09:30 +0100)]
STLINK: swd transport renamed and jtag+swim transport added

This patch add jtag support to the stlink driver add
two new transport types, JTAG and SWIM.

Change-Id: I7089d74250330be5c6a01c24066307641df7d11e
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/393
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: correct Stellaris LM3S811 config typo
Spencer Oliver [Wed, 25 Jan 2012 15:24:17 +0000 (15:24 +0000)]
cfg: correct Stellaris LM3S811 config typo

This only effects the older Stellaris LM3S811 kits (rev B and below).

Change-Id: Ie068cce7748fede9e7113ea63a69c96222c809fa
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/401
Tested-by: jenkins
7 years agoflash: fix stellaris class regression
Spencer Oliver [Wed, 25 Jan 2012 14:58:47 +0000 (14:58 +0000)]
flash: fix stellaris class regression

for some reason the following commit was incorrect
769064de4bd8fc59804c37a418b83fcdba6fd36f

Only the Sandstorm and Fury class should write this register.

Change-Id: Ie18f1da6e9b59fb99cca47aa93c7f2fee447ccea
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/400
Tested-by: jenkins
7 years agostlink: add missing memory check handlers
Spencer Oliver [Tue, 24 Jan 2012 15:07:59 +0000 (15:07 +0000)]
stlink: add missing memory check handlers

Change-Id: I502575ab77c0c87ffebb56ec3d78905f7fcf7cc5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/398
Tested-by: jenkins
7 years agoflash: cleanup/reformat fm3 flash driver
Fujitsu FM3 Application Team [Fri, 2 Dec 2011 11:28:29 +0000 (12:28 +0100)]
flash: cleanup/reformat fm3 flash driver

Signed-off-by: Fujitsu FM3 Application Team <openocd.fseu@de.fujitsu.com>
Change-Id: Iaf0bacfa5438a0213a65a3d60e7d461965a5a1ac
Reviewed-on: http://openocd.zylin.com/249
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoNAND: Misleading report of erased blocks
Timo Ketola [Tue, 17 Jan 2012 08:47:11 +0000 (10:47 +0200)]
NAND: Misleading report of erased blocks

For example, when blocks 2 and 3 were erased, openocd reported "erased blocks 2 to 4". That should be "2 to 3", I think.

Change-Id: Icece63dedd3dd931b70fa73616819a19572e39de
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/385
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoi.MX25: Set OOB size (MXC NFC)
Timo Ketola [Tue, 17 Jan 2012 08:42:19 +0000 (10:42 +0200)]
i.MX25: Set OOB size (MXC NFC)

SPAS register (OOB size) is left wrong after reset with respect to 2KiB page NAND chip. That will lead to ECC errors after 'reset halt'.

Change-Id: If5a4685cb8d6be35879453951611ef1059da219c
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/384
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoi.MX25: Add support for i.MX25 NAND Flash Controller
Timo Ketola [Tue, 17 Jan 2012 08:36:02 +0000 (10:36 +0200)]
i.MX25: Add support for i.MX25 NAND Flash Controller

This patch is based on Erik Ahlén's work on i.MX35 NFC support. Basically it redefines the CCM.RCSR register which is in a different address in i.MX25.

Change-Id: Ia6faf9cb5efae5e564b72ef9a9b7c7f8bfde3ce0
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/383
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: add missing Stellaris Blizzard info
Spencer Oliver [Fri, 20 Jan 2012 14:35:10 +0000 (14:35 +0000)]
cfg: add missing Stellaris Blizzard info

Change-Id: I1d6fb9a2ec8d87267a266f68c01ce032450e45d5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/392
Tested-by: jenkins
7 years agoflash: update stellaris_set_flash_timing for target class
Spencer Oliver [Tue, 17 Jan 2012 16:05:44 +0000 (16:05 +0000)]
flash: update stellaris_set_flash_timing for target class

stellaris_set_flash_timing should only be used for Sandstorm and Fury
device classes.

Change-Id: Ib5eff9d954c039f2c5726a8ecc3ee45d1694cfd3
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/389
Tested-by: jenkins
7 years agoflash: cleanup stellaris device class detection
Spencer Oliver [Tue, 17 Jan 2012 16:04:53 +0000 (16:04 +0000)]
flash: cleanup stellaris device class detection

read the target class during probe and save for later use.

Change-Id: Ib3ad20edc7d206b7f434bdcc6b947e6a5f06dd1f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/388
Tested-by: jenkins
7 years agostlink: better handle target reset/events
Spencer Oliver [Fri, 13 Jan 2012 11:29:21 +0000 (11:29 +0000)]
stlink: better handle target reset/events

This makes the stlink target use the std armv7m_arch_state giving
consistent OpenOCD output.

Added debug entry handler so we get debug entry reason.

Change-Id: Ia3c1380fd5033a8e541b0d45a7c3559f1b05957d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/379
Tested-by: jenkins
7 years agostlink: enable cortex special reg writes
Spencer Oliver [Fri, 13 Jan 2012 11:23:27 +0000 (11:23 +0000)]
stlink: enable cortex special reg writes

Change-Id: I5aa02e8de6dd5ac5a6ca628ba4068decb200c689
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/378
Tested-by: jenkins
7 years agocleanup: rename armv4_5 to arm for readability
Spencer Oliver [Thu, 19 Jan 2012 10:06:37 +0000 (10:06 +0000)]
cleanup: rename armv4_5 to arm for readability

Nothing more than a name change, just to make reading
the code a bit simpler.

Change-Id: I73a16b7302b48ce07d9688162955aae71d11eb45
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/390
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agoflash: print bank usage on failure
Spencer Oliver [Thu, 19 Jan 2012 15:08:50 +0000 (15:08 +0000)]
flash: print bank usage on failure

This makes use of the newly introduced usage field in the flash bank
structure.

Also remove the assertion if usage field is null and
lets print a DEBUG_LOG message instead.

Change-Id: I384bf0e2c444fcc99deef73aec9ef01149a91c76
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/391
Tested-by: jenkins
7 years agoflash: add missing stellaris device classes
Spencer Oliver [Mon, 16 Jan 2012 17:36:41 +0000 (17:36 +0000)]
flash: add missing stellaris device classes

This adds missing classes to the stellaris flash driver.

Change-Id: I90f2218479e5eb60950046fef04429b9529f7ddf
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/382
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agodoc: Update patch procedure
Timo Ketola [Tue, 17 Jan 2012 14:10:10 +0000 (16:10 +0200)]
doc: Update patch procedure

Change-Id: I3e50357b4ddaf483712bbac68b6427b31529f666
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/387
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotarget: move regmaps to armv7m.c
Spencer Oliver [Fri, 13 Jan 2012 10:45:36 +0000 (10:45 +0000)]
target: move regmaps to armv7m.c

This move will enable use to share with regmaps with the stlink target.

Change-Id: If8f41c7c53323d5074cb22ec3440530c1e402004
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/377
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agocmd: add missing usage vars
Spencer Oliver [Mon, 16 Jan 2012 13:35:23 +0000 (13:35 +0000)]
cmd: add missing usage vars

we should have caught them all - hopefully.

Change-Id: I35435317fccaf5ad0216244d69f76db6857bb582
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/381
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agobuild: fix broken make distcheck
Spencer Oliver [Mon, 16 Jan 2012 09:16:04 +0000 (09:16 +0000)]
build: fix broken make distcheck

0a4b27ec4bcb303547af68490f007d65a00bff02 commit forgot to update required
distcheck files.

Change-Id: I3a5b94d4548c02cb9c1fc371a6fdcc2a3854e9c7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/380
Tested-by: jenkins
7 years agou8500: linux rtos config
Michel JAOUEN [Fri, 6 Jan 2012 11:19:37 +0000 (12:19 +0100)]
u8500: linux rtos config

Change-Id: I21a9dcc5fb260095aed2217e467b74ebecb39afb
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/349
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos : linux awareness
Michel JAOUEN [Wed, 11 Jan 2012 09:59:29 +0000 (10:59 +0100)]
rtos : linux awareness

Change-Id: I41294ccaa4a3cd253919c8b1b558205903bcb695
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/348
Tested-by: jenkins
Reviewed-by: Heythem Bouhaja <heythem.bouhaja-nonst@stericsson.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos : create qsymbol interface and add str_to_hex interface
Michel JAOUEN [Tue, 3 Jan 2012 16:12:29 +0000 (17:12 +0100)]
rtos : create qsymbol interface and add str_to_hex interface

Change-Id: I1b26f7efd3ad4a060f772dd12408e77a03d93cea
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/347
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos : receive reset info
Michel JAOUEN [Tue, 3 Jan 2012 15:38:03 +0000 (16:38 +0100)]
rtos : receive reset info

Change-Id: I03c64f50eed9bec43303bf47ac1f226a0e8dbd53
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/346
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos : ps command
Michel JAOUEN [Tue, 3 Jan 2012 15:18:22 +0000 (16:18 +0100)]
rtos : ps command

Change-Id: I1b00b6d72f425826c33b0df7dd63114ce642ce93
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/345
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos : smp support
Michel JAOUEN [Tue, 3 Jan 2012 15:12:50 +0000 (16:12 +0100)]
rtos : smp support

Change-Id: I583cddf5e62ed77f108786a085569ab8699ad50d
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/344
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos : current_threadid move to rtos context
Michel JAOUEN [Tue, 3 Jan 2012 15:07:55 +0000 (16:07 +0100)]
rtos : current_threadid move to rtos context

Change-Id: I49d9d6d64c418be601d8723cb3eea9c3716ecb6b
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/343
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos :introduce possible overload by rtos of gdb_thread_packet
Michel JAOUEN [Tue, 3 Jan 2012 14:41:53 +0000 (15:41 +0100)]
rtos :introduce possible overload by rtos of gdb_thread_packet

Change-Id: I17381b581556fa75098a84699dbbf69423fe20eb
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/342
Tested-by: jenkins
Reviewed-by: Evan Hunter <evan@ozhiker.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agortos : remove unused parameter
Michel JAOUEN [Tue, 3 Jan 2012 14:34:14 +0000 (15:34 +0100)]
rtos : remove unused parameter

Change-Id: I98c9f28a0085bd4713b694181ab544777091eac6
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/341
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agocfg: fix typo in str730.cfg
John [Fri, 13 Jan 2012 09:56:36 +0000 (09:56 +0000)]
cfg: fix typo in str730.cfg

Change-Id: Ie0222b68b3d8dd21726ac4f0cd4106da0e0456dd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/376
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
7 years agostlink: handle wrong initialization file if no layout was specified
Mathias K [Thu, 12 Jan 2012 16:33:05 +0000 (17:33 +0100)]
stlink: handle wrong initialization file if no layout was specified

This patch remove the hardcoded default layout and return an error
if no layout was specified in the configuration file.

Change-Id: I0e7833faa2dc194e727122840bcbdacd321cc4fd
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/369
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agostlink: add none 32bit memory read/write functions
Mathias K [Thu, 12 Jan 2012 20:07:57 +0000 (21:07 +0100)]
stlink: add none 32bit memory read/write functions

This patch add none 32bit memory read/write  functions.

Change-Id: Ie3a761cf006249b30d0691d1ea167d69a012c36a
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/367
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agostlink: add read/write 8bit memory
Mathias K [Thu, 12 Jan 2012 12:32:03 +0000 (13:32 +0100)]
stlink: add read/write 8bit memory

This patch add layout api funtions and implementation
to read/write 8bit memory.

Change-Id: I8d145eb07e5afa9ce1830578e57d80a80d21e7dc
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/366
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agobuild: fix broken commit
Spencer Oliver [Thu, 12 Jan 2012 22:00:09 +0000 (22:00 +0000)]
build: fix broken commit

fixes commit 04fe2ca5547f76686c7dc555f90510eed6fcc551

Change-Id: Id7fcb82fa1a445f1df21b8d98e945f7c0e08ec93
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/375
Tested-by: jenkins
7 years agostlink: correctly signal stlink_interface_open failure
Spencer Oliver [Thu, 12 Jan 2012 14:15:28 +0000 (14:15 +0000)]
stlink: correctly signal stlink_interface_open failure

give the user a error msg on open failure.

Change-Id: If4a57bac7f3e1746c2a05c7a96747a38da188041
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/368
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
7 years agoflash: stm32f2x incorrectly using 512 as max family size
Spencer Oliver [Mon, 9 Jan 2012 12:44:48 +0000 (12:44 +0000)]
flash: stm32f2x incorrectly using 512 as max family size

Change-Id: I2bac348c6d0baabd3d88335c5aa0a318ef66653a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/353
Tested-by: jenkins
7 years agoflash: detect stm32f4x device id errata
Spencer Oliver [Mon, 9 Jan 2012 13:00:22 +0000 (13:00 +0000)]
flash: detect stm32f4x device id errata

This allows us to detect a device arrata where the device id returned is
incorrect.

This issue only effects stm32f4x Rev A silicon.

Change-Id: Ic9f4985f9abf562f97322dcf484199f0a4eb01bb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/354
Tested-by: jenkins
7 years agocmd: add missing usage var
Spencer Oliver [Mon, 9 Jan 2012 16:14:18 +0000 (16:14 +0000)]
cmd: add missing usage var

Change-Id: I0f05d643b0801b19cc3beb88f0d12d7e4c83ef9c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/356
Tested-by: jenkins
7 years agostlink: add dummy speed handlers
Spencer Oliver [Mon, 9 Jan 2012 14:43:26 +0000 (14:43 +0000)]
stlink: add dummy speed handlers

Change-Id: I0445be7867637728145941b06225dc0acc5380e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/355
Tested-by: jenkins
7 years agoflash: use correct device_id mask
Spencer Oliver [Mon, 9 Jan 2012 12:42:31 +0000 (12:42 +0000)]
flash: use correct device_id mask

The stm32 drivers have been using 0x7ff as the DEV_ID mask, this should
have been 0xfff.

Change-Id: I232469620969d6dd1b9a2a2aa15ec18b947dbb05
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/352
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agooptimize: replace while loop by memcpy
Mathias K [Tue, 10 Jan 2012 22:21:30 +0000 (23:21 +0100)]
optimize: replace while loop by memcpy

There is no need to use a while loop here. This patch simple copy
the last bytes with the system function.

Change-Id: Ibda72dca449746efeba5a1af2e45c5990f9cf347
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/364
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agobuild: remove unused variables
Spencer Oliver [Mon, 9 Jan 2012 22:04:03 +0000 (22:04 +0000)]
build: remove unused variables

detected by clang.

Change-Id: Id9effcc5437870f37fecd33803f7753c6eca53d6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/361
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
7 years agoflash: pre-check flash unlock for stm32f2x
Bruno FLEURETTE [Tue, 10 Jan 2012 15:21:00 +0000 (16:21 +0100)]
flash: pre-check flash unlock for stm32f2x

add checking of the current flash lock status before performing the unlock sequence (which would fail in an unlocked state)

Change-Id: I693294c9cd2f59e69cb5bf3338120052fd680b1e
Signed-off-by: Bruno FLEURETTE <bruno.fleurette@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/363
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
7 years agoxsvf: fix clang warning
Spencer Oliver [Mon, 9 Jan 2012 21:43:27 +0000 (21:43 +0000)]
xsvf: fix clang warning

clang reports 'Function call argument is an uninitialized value'.

Change-Id: I50f4a7932b59930a5f1e3ece70b12c59e85ea3c6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/360
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agotarget: fix missing semihosting return path
Spencer Oliver [Mon, 9 Jan 2012 21:35:19 +0000 (21:35 +0000)]
target: fix missing semihosting return path

bug nicely caught by clang.

Change-Id: I7abf0fdd76666fb3eb1c83e3edfd01e0da485ffe
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/359
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
7 years agoflash: support stm32f4x flash
Spencer Oliver [Wed, 4 Jan 2012 22:55:49 +0000 (22:55 +0000)]
flash: support stm32f4x flash

This uses the same controller as the stm32f2x family.

Change-Id: I931a9ceb0cd1219514d14b8b59475179e543dd0f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/338
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>