jtag: linuxgpiod: drop extra parenthesis

[openocd.git] / tcl / target / str730.cfg

diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg
index 48d3134aac151c92724dcc14dd0a2bf8fca6ae14..57681f9fcc94ae1e3e2451322c8ffaa2258fd89c 100644 (file)
--- a/tcl/target/str730.cfg
+++ b/tcl/target/str730.cfg
@@ -1,6 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #STR730 CPU
 
-adapter_khz 3000
+adapter speed 3000
 
 if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
@@ -27,15 +29,15 @@ reset_config trst_and_srst srst_pulls_trst
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 #jtag nTRST and nSRST delay
-adapter_nsrst_delay 500
+adapter srst delay 500
 jtag_ntrst_delay 500
 
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
 
-$_TARGETNAME configure -event reset-start { adapter_khz 10 }
+$_TARGETNAME configure -event reset-start { adapter speed 10 }
 $_TARGETNAME configure -event reset-init {
-       adapter_khz 3000
+       adapter speed 3000
 
 # Because the hardware cannot be interrogated for the protection state
 # of sectors, initialize all the sectors to be unprotected. The initial
@@ -51,4 +53,3 @@ $_TARGETNAME configure -work-area-phys 0xA0000000 -work-area-size 0x4000 -work-a
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME str7x 0x80000000 0x00040000 0 0 $_TARGETNAME STR73x
-