reverse order of Jim stack trace output

[openocd.git] / tcl / target / pxa270.cfg

diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg
index 6f209f8992580bcda3744e02011f9cca37ad98e7..7aaef8c7f903d1d40726c7220282baa1c3a9a32e 100644 (file)
--- a/tcl/target/pxa270.cfg
+++ b/tcl/target/pxa270.cfg
@@ -1,39 +1,44 @@
 #Marvell/Intel PXA270 Script
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME pxa270
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
-#IDs for pxa270. Choose one. Are there others?#
-#set CPUTAPID 0x79265013
-#set CPUTAPID 0x49265013
+#IDs for pxa270. Are there more?
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
+  # set useful default
+   set _CPUTAPID 0x49265013
+}
+
+if { [info exists CPUTAPID2 ] } {
+   set _CPUTAPID2 $CPUTAPID2
+} else {
+  # set useful default
+   set _CPUTAPID2 0x79265013
 }
 
 
-# set jtag_nsrst_delay to the delay introduced by your reset circuit
+# set adapter_nsrst_delay to the delay introduced by your reset circuit
 # the rest of the needed delays are built into the openocd program
-jtag_nsrst_delay 260
+adapter_nsrst_delay 260
 # set the jtag_ntrst_delay to the delay introduced by a reset circuit
 # the rest of the needed delays are built into the openocd program
-jtag_ntrst_delay 0
+jtag_ntrst_delay 250
 
 set _TARGETNAME $_CHIPNAME.cpu
-jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2
 
 target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0