jtag: linuxgpiod: drop extra parenthesis

[openocd.git] / tcl / target / c100helper.tcl

diff --git a/tcl/target/c100helper.tcl b/tcl/target/c100helper.tcl
index 9b8256d7e429a6bb10372c774d84959b8a77a3d9..d1d3f258bc7ea6da4be9d322d137dc4f6d51c0f5 100644 (file)
--- a/tcl/target/c100helper.tcl
+++ b/tcl/target/c100helper.tcl
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
 
 proc helpC100 {} {
     echo "List of useful functions for C100 processor:"
@@ -13,25 +14,23 @@ proc helpC100 {} {
     echo "10) showArmClk:        will show current config registers for Arm Bus Clock"
     echo "11) setupArmClk:       will setup Amba Bus Clock=450MHz"
     echo "12) ooma_board_detect: will show which version of Telo you have"
-    echo "13) setupDDR2:         will configure DDR2 controller, you must have PLLs configureg"
+    echo "13) setupDDR2:         will configure DDR2 controller, you must have PLLs configured"
     echo "14) showDDR2:          will show DDR2 config registers"
     echo "15) showWatchdog:      will show current register config for watchdog"
     echo "16) reboot:            will trigger watchdog and reboot Telo (hw reset)"
     echo "17) bootNOR:           will boot Telo from NOR"
-    echo "18) setupUART0:        will configure UART0 for 115200 8N1, PLLs have to be confiured"
+    echo "18) setupUART0:        will configure UART0 for 115200 8N1, PLLs have to be configured"
     echo "19) putcUART0:         will print a character on UART0"
     echo "20) putsUART0:         will print a string on UART0"
-    echo "21) trainDDR2:          will run DDR2 training program"
-    echo "22) flashUBOOT:        will prgram NOR sectors 0-3 with u-boot.bin"
+    echo "21) trainDDR2:         will run DDR2 training program"
+    echo "22) flashUBOOT:        will program NOR sectors 0-3 with u-boot.bin"
 }
 
 source [find mem_helper.tcl]
 
 # read a 64-bit register (memory mapped)
 proc mr64bit {reg} {
-    set value ""
-    mem2array value 32 $reg 2
-    return $value
+    return [read_memory $reg 32 2]
 }
 
 
@@ -117,19 +116,19 @@ proc showAmbaClk {} {
     set PLL_CLK_BYPASS              [regs PLL_CLK_BYPASS]
 
     echo [format "CLKCORE_AHB_CLK_CNTRL       (0x%x): 0x%x" $CLKCORE_AHB_CLK_CNTRL [mrw $CLKCORE_AHB_CLK_CNTRL]]
-    mem2array value 32 $CLKCORE_AHB_CLK_CNTRL 1
+    set value [read_memory $CLKCORE_AHB_CLK_CNTRL 32 1]
     # see if the PLL is in bypass mode
-    set bypass [expr ($value(0) & $PLL_CLK_BYPASS) >> 24 ]
+    set bypass [expr {($value & $PLL_CLK_BYPASS) >> 24}]
     echo [format "PLL bypass bit: %d" $bypass]
     if {$bypass == 1} {
        echo [format "Amba Clk is set to REFCLK: %d (MHz)" [expr {$CFG_REFCLKFREQ/1000000}]]
     } else {
        # nope, extract x,y,w and compute the PLL output freq.
-       set x [expr ($value(0) & 0x0001F0000) >> 16]
+       set x [expr {($value & 0x0001F0000) >> 16}]
        echo [format "x: %d" $x]
-       set y [expr ($value(0) & 0x00000007F)]
+       set y [expr {($value & 0x00000007F)}]
        echo [format "y: %d" $y]
-       set w [expr ($value(0) & 0x000000300) >> 8]
+       set w [expr {($value & 0x000000300) >> 8}]
        echo [format "w: %d" $w]
        echo [format "Amba PLL Clk: %d (MHz)" [expr {($CFG_REFCLKFREQ * $y / (($w + 1) * ($x + 1) * 2))/1000000}]]
     }
@@ -177,7 +176,7 @@ proc setupAmbaClk {} {
     mmw $CLKCORE_AHB_CLK_CNTRL [expr {($x << 16) + ($w << 8) + $y}] 0x0
     # wait for PLL to lock
     echo "Waiting for Amba PLL to lock"
-    while {[expr [mrw $CLKCORE_PLL_STATUS] & $AHBCLK_PLL_LOCK] == 0} { sleep 1 }
+    while {[expr {[mrw $CLKCORE_PLL_STATUS] & $AHBCLK_PLL_LOCK]} == 0} { sleep 1 }
     # remove the internal PLL bypass
     mmw $CLKCORE_AHB_CLK_CNTRL 0x0 $AHB_PLL_BY_CTRL
     # remove PLL from BYPASS mode using MUX
@@ -192,19 +191,19 @@ proc showArmClk {} {
     set PLL_CLK_BYPASS         [regs PLL_CLK_BYPASS]
 
     echo [format "CLKCORE_ARM_CLK_CNTRL       (0x%x): 0x%x" $CLKCORE_ARM_CLK_CNTRL [mrw $CLKCORE_ARM_CLK_CNTRL]]
-    mem2array value 32 $CLKCORE_ARM_CLK_CNTRL 1
+    set value [read_memory $CLKCORE_ARM_CLK_CNTRL 32 1]
     # see if the PLL is in bypass mode
-    set bypass [expr ($value(0) & $PLL_CLK_BYPASS) >> 24 ]
+    set bypass [expr {($value & $PLL_CLK_BYPASS) >> 24}]
     echo [format "PLL bypass bit: %d" $bypass]
     if {$bypass == 1} {
        echo [format "Amba Clk is set to REFCLK: %d (MHz)" [expr {$CFG_REFCLKFREQ/1000000}]]
     } else {
        # nope, extract x,y,w and compute the PLL output freq.
-       set x [expr ($value(0) & 0x0001F0000) >> 16]
+       set x [expr {($value & 0x0001F0000) >> 16}]
        echo [format "x: %d" $x]
-       set y [expr ($value(0) & 0x00000007F)]
+       set y [expr {($value & 0x00000007F)}]
        echo [format "y: %d" $y]
-       set w [expr ($value(0) & 0x000000300) >> 8]
+       set w [expr {($value & 0x000000300) >> 8}]
        echo [format "w: %d" $w]
        echo [format "Arm PLL Clk: %d (MHz)" [expr {($CFG_REFCLKFREQ * $y / (($w + 1) * ($x + 1) * 2))/1000000}]]
     }
@@ -251,7 +250,7 @@ proc setupArmClk {} {
     mmw $CLKCORE_ARM_CLK_CNTRL [expr {($x << 16) + ($w << 8) + $y}] 0x0
     # wait for PLL to lock
     echo "Waiting for Amba PLL to lock"
-    while {[expr [mrw $CLKCORE_PLL_STATUS] & $FCLK_PLL_LOCK] == 0} { sleep 1 }
+    while {[expr {[mrw $CLKCORE_PLL_STATUS] & $FCLK_PLL_LOCK]} == 0} { sleep 1 }
     # remove the internal PLL bypass
     mmw $CLKCORE_ARM_CLK_CNTRL 0x0 $ARM_PLL_BY_CTRL
     # remove PLL from BYPASS mode using MUX
@@ -442,7 +441,7 @@ proc initC100 {} {
     # APB init
     #          // Setting APB Bus Wait states to 1, set post write
     #  (*(volatile u32*)(APB_ACCESS_WS_REG)) = 0x40;
-    mww [expr $APB_ACCESS_WS_REG] 0x40
+    mww $APB_ACCESS_WS_REG 0x40
     # AHB init
     #  // enable all 6 masters for ARAM
     mmw $ASA_ARAM_TC_CR_REG [expr {$ASA_TC_REQIDMAEN | $ASA_TC_REQTDMEN | $ASA_TC_REQIPSECUSBEN | $ASA_TC_REQARM0EN | $ASA_TC_REQARM1EN | $ASA_TC_REQMDMAEN}] 0x0