+// SPDX-License-Identifier: GPL-2.0-or-later
+
/***************************************************************************
* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* Copyright (C) 2011 by Drasko DRASKOVIC *
* drasko.draskovic@gmail.com *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#endif
#include "mips32.h"
+#include "mips_cpu.h"
#include "breakpoints.h"
#include "algorithm.h"
#include "register.h"
static const char *mips_isa_strings[] = {
- "MIPS32", "MIPS16"
+ "MIPS32", "MIPS16", "", "MICRO MIPS32",
};
-#define MIPS32_GDB_DUMMY_FP_REG 1
+#define MIPS32_GDB_FP_REG 1
/*
* GDB registers
enum reg_type type;
const char *group;
const char *feature;
- int flag;
+ int size;
} mips32_regs[] = {
{ 0, "r0", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
{ 1, "r1", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
{ 29, "r29", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
{ 30, "r30", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
{ 31, "r31", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
- { 32, "status", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cp0", 0 },
- { 33, "lo", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
- { 34, "hi", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
- { 35, "badvaddr", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cp0", 0 },
- { 36, "cause", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cp0", 0 },
- { 37, "pc", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
-
- { 38, "f0", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 39, "f1", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 40, "f2", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 41, "f3", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 42, "f4", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 43, "f5", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 44, "f6", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 45, "f7", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 46, "f8", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 47, "f9", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 48, "f10", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 49, "f11", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 50, "f12", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 51, "f13", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 52, "f14", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 53, "f15", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 54, "f16", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 55, "f17", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 56, "f18", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 57, "f19", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 58, "f20", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 59, "f21", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 60, "f22", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 61, "f23", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 62, "f24", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 63, "f25", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 64, "f26", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 65, "f27", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 66, "f28", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 67, "f29", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 68, "f30", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 69, "f31", REG_TYPE_IEEE_SINGLE, NULL,
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 70, "fcsr", REG_TYPE_INT, "float",
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
- { 71, "fir", REG_TYPE_INT, "float",
- "org.gnu.gdb.mips.fpu", MIPS32_GDB_DUMMY_FP_REG },
+ { 32, "lo", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
+ { 33, "hi", REG_TYPE_INT, NULL, "org.gnu.gdb.mips.cpu", 0 },
+
+ { MIPS32_REGLIST_FP_INDEX + 0, "f0", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 1, "f1", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 2, "f2", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 3, "f3", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 4, "f4", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 5, "f5", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 6, "f6", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 7, "f7", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 8, "f8", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 9, "f9", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 10, "f10", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 11, "f11", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 12, "f12", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 13, "f13", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 14, "f14", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 15, "f15", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 16, "f16", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 17, "f17", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 18, "f18", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 19, "f19", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 20, "f20", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 21, "f21", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 22, "f22", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 23, "f23", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 24, "f24", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 25, "f25", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 26, "f26", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 27, "f27", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 28, "f28", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 29, "f29", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 30, "f30", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+ { MIPS32_REGLIST_FP_INDEX + 31, "f31", REG_TYPE_IEEE_DOUBLE, NULL,
+ "org.gnu.gdb.mips.fpu", MIPS32_GDB_FP_REG },
+
+ { MIPS32_REGLIST_FPC_INDEX + 0, "fcsr", REG_TYPE_INT, "float",
+ "org.gnu.gdb.mips.fpu", 0 },
+ { MIPS32_REGLIST_FPC_INDEX + 1, "fir", REG_TYPE_INT, "float",
+ "org.gnu.gdb.mips.fpu", 0 },
+
+ { MIPS32_REGLIST_C0_STATUS_INDEX, "status", REG_TYPE_INT, NULL,
+ "org.gnu.gdb.mips.cp0", 0 },
+ { MIPS32_REGLIST_C0_BADVADDR_INDEX, "badvaddr", REG_TYPE_INT, NULL,
+ "org.gnu.gdb.mips.cp0", 0 },
+ { MIPS32_REGLIST_C0_CAUSE_INDEX, "cause", REG_TYPE_INT, NULL,
+ "org.gnu.gdb.mips.cp0", 0 },
+ { MIPS32_REGLIST_C0_PC_INDEX, "pc", REG_TYPE_INT, NULL,
+ "org.gnu.gdb.mips.cpu", 0 },
+ { MIPS32_REGLIST_C0_GUESTCTL1_INDEX, "guestCtl1", REG_TYPE_INT, NULL,
+ "org.gnu.gdb.mips.cp0", 0 },
};
-
#define MIPS32_NUM_REGS ARRAY_SIZE(mips32_regs)
-static uint8_t mips32_gdb_dummy_fp_value[] = {0, 0, 0, 0};
+
+
+#define zero 0
+
+#define AT 1
+
+#define v0 2
+#define v1 3
+
+#define a0 4
+#define a1 5
+#define a2 6
+#define a3 7
+#define t0 8
+#define t1 9
+#define t2 10
+#define t3 11
+#define t4 12
+#define t5 13
+#define t6 14
+#define t7 15
+#define ta0 12 /* alias for $t4 */
+#define ta1 13 /* alias for $t5 */
+#define ta2 14 /* alias for $t6 */
+#define ta3 15 /* alias for $t7 */
+
+#define s0 16
+#define s1 17
+#define s2 18
+#define s3 19
+#define s4 20
+#define s5 21
+#define s6 22
+#define s7 23
+#define s8 30 /* == fp */
+
+#define t8 24
+#define t9 25
+#define k0 26
+#define k1 27
+
+#define gp 28
+
+#define sp 29
+#define fp 30
+#define ra 31
+
+
+static const struct {
+ const char *name;
+} mips32_dsp_regs[MIPS32NUMDSPREGS] = {
+ { "hi0"},
+ { "hi1"},
+ { "hi2"},
+ { "hi3"},
+ { "lo0"},
+ { "lo1"},
+ { "lo2"},
+ { "lo3"},
+ { "control"},
+};
static int mips32_get_core_reg(struct reg *reg)
{
{
struct mips32_core_reg *mips32_reg = reg->arch_info;
struct target *target = mips32_reg->target;
- uint32_t value = buf_get_u32(buf, 0, 32);
+ uint64_t value;
+
+ if (reg->size == 64)
+ value = buf_get_u64(buf, 0, 64);
+ else
+ value = buf_get_u32(buf, 0, 32);
if (target->state != TARGET_HALTED)
return ERROR_TARGET_NOT_HALTED;
- buf_set_u32(reg->value, 0, 32, value);
- reg->dirty = 1;
- reg->valid = 1;
+ if (reg->size == 64)
+ buf_set_u64(reg->value, 0, 64, value);
+ else
+ buf_set_u32(reg->value, 0, 32, value);
+
+ reg->dirty = true;
+ reg->valid = true;
return ERROR_OK;
}
+/**
+ * mips32_set_all_fpr_width - Set the width of all floating-point registers
+ * @param[in] mips32: MIPS32 common structure
+ * @param[in] fp64: Flag indicating whether to set the width to 64 bits (double precision)
+ *
+ * @brief Sets the width of all floating-point registers based on the specified flag.
+ */
+static void mips32_set_all_fpr_width(struct mips32_common *mips32, bool fp64)
+{
+ struct reg_cache *cache = mips32->core_cache;
+ struct reg *reg_list = cache->reg_list;
+ int i;
+
+ for (i = MIPS32_REGLIST_FP_INDEX; i < (MIPS32_REGLIST_FP_INDEX + MIPS32_REG_FP_COUNT); i++) {
+ reg_list[i].size = fp64 ? 64 : 32;
+ reg_list[i].reg_data_type->type = fp64 ? REG_TYPE_IEEE_DOUBLE : REG_TYPE_IEEE_SINGLE;
+ }
+}
+
+/**
+ * mips32_detect_fpr_mode_change - Detect changes in floating-point register mode
+ * @param[in] mips32: MIPS32 common structure
+ * @param[in] cp0_status: Value of the CP0 status register
+ *
+ * @brief Detects changes in the floating-point register mode based on the CP0 status register.
+ * If changes are detected, it updates the internal state
+ * and logs a warning message indicating the mode change.
+ */
+static void mips32_detect_fpr_mode_change(struct mips32_common *mips32, uint32_t cp0_status)
+{
+ if (!mips32->fp_imp)
+ return;
+
+ /* CP0.Status.FR indicates the working mode of floating-point register.
+ * When FP = 0, fpr can contain any 32bit data type,
+ * 64bit data types are stored in even-odd register pairs.
+ * When FP = 1, fpr can contain any data types.*/
+ bool fpu_in_64bit = ((cp0_status & BIT(MIPS32_CP0_STATUS_FR_SHIFT)) != 0);
+
+ /* CP0.Status.CU1 indicated whether CoProcessor1(which is FPU) is present. */
+ bool fp_enabled = ((cp0_status & BIT(MIPS32_CP0_STATUS_CU1_SHIFT)) != 0);
+
+ if (mips32->fpu_in_64bit != fpu_in_64bit) {
+ mips32->fpu_in_64bit = fpu_in_64bit;
+ mips32_set_all_fpr_width(mips32, fpu_in_64bit);
+ LOG_WARNING("** FP mode changed to %sbit, you must reconnect GDB **", fpu_in_64bit ? "64" : "32");
+ }
+
+ if (mips32->fpu_enabled != fp_enabled) {
+ mips32->fpu_enabled = fp_enabled;
+ const char *s = fp_enabled ? "enabled" : "disabled";
+ LOG_WARNING("** FP is %s, register update %s **", s, s);
+ }
+}
+
static int mips32_read_core_reg(struct target *target, unsigned int num)
{
- uint32_t reg_value;
+ unsigned int cnum;
+ uint64_t reg_value = 0;
/* get pointers to arch-specific information */
struct mips32_common *mips32 = target_to_mips32(target);
if (num >= MIPS32_NUM_REGS)
return ERROR_COMMAND_SYNTAX_ERROR;
- reg_value = mips32->core_regs[num];
- buf_set_u32(mips32->core_cache->reg_list[num].value, 0, 32, reg_value);
- mips32->core_cache->reg_list[num].valid = 1;
- mips32->core_cache->reg_list[num].dirty = 0;
+ if (num >= MIPS32_REGLIST_C0_INDEX) {
+ /* CP0 */
+ cnum = num - MIPS32_REGLIST_C0_INDEX;
+ reg_value = mips32->core_regs.cp0[cnum];
+ buf_set_u32(mips32->core_cache->reg_list[num].value, 0, 32, reg_value);
+ if (cnum == MIPS32_REG_C0_STATUS_INDEX)
+ mips32_detect_fpr_mode_change(mips32, reg_value);
+ } else if (num >= MIPS32_REGLIST_FPC_INDEX) {
+ /* FPCR */
+ cnum = num - MIPS32_REGLIST_FPC_INDEX;
+ reg_value = mips32->core_regs.fpcr[cnum];
+ buf_set_u32(mips32->core_cache->reg_list[num].value, 0, 32, reg_value);
+ } else if (num >= MIPS32_REGLIST_FP_INDEX) {
+ /* FPR */
+ cnum = num - MIPS32_REGLIST_FP_INDEX;
+ reg_value = mips32->core_regs.fpr[cnum];
+ buf_set_u64(mips32->core_cache->reg_list[num].value, 0, 64, reg_value);
+ } else {
+ /* GPR */
+ cnum = num - MIPS32_REGLIST_GP_INDEX;
+ reg_value = mips32->core_regs.gpr[cnum];
+ buf_set_u32(mips32->core_cache->reg_list[num].value, 0, 32, reg_value);
+ }
+
+ mips32->core_cache->reg_list[num].valid = true;
+ mips32->core_cache->reg_list[num].dirty = false;
+
+ LOG_DEBUG("read core reg %i value 0x%" PRIx64 "", num, reg_value);
return ERROR_OK;
}
static int mips32_write_core_reg(struct target *target, unsigned int num)
{
- uint32_t reg_value;
+ unsigned int cnum;
+ uint64_t reg_value;
/* get pointers to arch-specific information */
struct mips32_common *mips32 = target_to_mips32(target);
if (num >= MIPS32_NUM_REGS)
return ERROR_COMMAND_SYNTAX_ERROR;
- reg_value = buf_get_u32(mips32->core_cache->reg_list[num].value, 0, 32);
- mips32->core_regs[num] = reg_value;
- LOG_DEBUG("write core reg %i value 0x%" PRIx32 "", num , reg_value);
- mips32->core_cache->reg_list[num].valid = 1;
- mips32->core_cache->reg_list[num].dirty = 0;
+ if (num >= MIPS32_REGLIST_C0_INDEX) {
+ /* CP0 */
+ cnum = num - MIPS32_REGLIST_C0_INDEX;
+ reg_value = buf_get_u32(mips32->core_cache->reg_list[num].value, 0, 32);
+ mips32->core_regs.cp0[cnum] = (uint32_t)reg_value;
+ if (cnum == MIPS32_REG_C0_STATUS_INDEX)
+ mips32_detect_fpr_mode_change(mips32, reg_value);
+ } else if (num >= MIPS32_REGLIST_FPC_INDEX) {
+ /* FPCR */
+ cnum = num - MIPS32_REGLIST_FPC_INDEX;
+ reg_value = buf_get_u32(mips32->core_cache->reg_list[num].value, 0, 32);
+ mips32->core_regs.fpcr[cnum] = (uint32_t)reg_value;
+ } else if (num >= MIPS32_REGLIST_FP_INDEX) {
+ /* FPR */
+ cnum = num - MIPS32_REGLIST_FP_INDEX;
+ reg_value = buf_get_u64(mips32->core_cache->reg_list[num].value, 0, 64);
+ mips32->core_regs.fpr[cnum] = reg_value;
+ } else {
+ /* GPR */
+ cnum = num - MIPS32_REGLIST_GP_INDEX;
+ reg_value = buf_get_u32(mips32->core_cache->reg_list[num].value, 0, 32);
+ mips32->core_regs.gpr[cnum] = (uint32_t)reg_value;
+ }
+
+ LOG_DEBUG("write core reg %i value 0x%" PRIx64 "", num, reg_value);
+ mips32->core_cache->reg_list[num].valid = true;
+ mips32->core_cache->reg_list[num].dirty = false;
return ERROR_OK;
}
/* get pointers to arch-specific information */
struct mips32_common *mips32 = target_to_mips32(target);
- struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
/* read core registers */
- mips32_pracc_read_regs(ejtag_info, mips32->core_regs);
+ int retval = mips32_pracc_read_regs(mips32);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Could not read core registers from target");
+ return retval;
+ }
for (i = 0; i < MIPS32_NUM_REGS; i++) {
if (!mips32->core_cache->reg_list[i].valid)
/* get pointers to arch-specific information */
struct mips32_common *mips32 = target_to_mips32(target);
- struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
for (i = 0; i < MIPS32_NUM_REGS; i++) {
if (mips32->core_cache->reg_list[i].dirty)
}
/* write core regs */
- mips32_pracc_write_regs(ejtag_info, mips32->core_regs);
-
- return ERROR_OK;
+ return mips32_pracc_write_regs(mips32);
}
int mips32_arch_state(struct target *target)
LOG_USER("target halted in %s mode due to %s, pc: 0x%8.8" PRIx32 "",
mips_isa_strings[mips32->isa_mode],
debug_reason_name(target),
- buf_get_u32(mips32->core_cache->reg_list[MIPS32_PC].value, 0, 32));
+ buf_get_u32(mips32->core_cache->reg_list[MIPS32_REGLIST_C0_PC_INDEX].value, 0, 32));
return ERROR_OK;
}
arch_info[i].mips32_common = mips32;
reg_list[i].name = mips32_regs[i].name;
- reg_list[i].size = 32;
-
- if (mips32_regs[i].flag == MIPS32_GDB_DUMMY_FP_REG) {
- reg_list[i].value = mips32_gdb_dummy_fp_value;
- reg_list[i].valid = 1;
- reg_list[i].arch_info = NULL;
- register_init_dummy(®_list[i]);
- } else {
- reg_list[i].value = calloc(1, 4);
- reg_list[i].valid = 0;
- reg_list[i].type = &mips32_reg_type;
- reg_list[i].arch_info = &arch_info[i];
-
- reg_list[i].reg_data_type = calloc(1, sizeof(struct reg_data_type));
- if (reg_list[i].reg_data_type)
- reg_list[i].reg_data_type->type = mips32_regs[i].type;
- else
- LOG_ERROR("unable to allocate reg type list");
- }
+ reg_list[i].size = mips32_regs[i].size ? 64 : 32;
+
+ reg_list[i].value = mips32_regs[i].size ? calloc(1, 8) : calloc(1, 4);
+ reg_list[i].valid = false;
+ reg_list[i].type = &mips32_reg_type;
+ reg_list[i].arch_info = &arch_info[i];
+
+ reg_list[i].reg_data_type = calloc(1, sizeof(struct reg_data_type));
+ if (reg_list[i].reg_data_type)
+ reg_list[i].reg_data_type->type = mips32_regs[i].type;
+ else
+ LOG_ERROR("unable to allocate reg type list");
+
- reg_list[i].dirty = 0;
+ reg_list[i].dirty = false;
reg_list[i].group = mips32_regs[i].group;
reg_list[i].number = i;
target->arch_info = mips32;
mips32->common_magic = MIPS32_COMMON_MAGIC;
mips32->fast_data_area = NULL;
+ mips32->isa_imp = MIPS32_ONLY; /* default */
/* has breakpoint/watchpoint unit been scanned */
mips32->bp_scanned = 0;
mips32->ejtag_info.scan_delay = MIPS32_SCAN_DELAY_LEGACY_MODE;
mips32->ejtag_info.mode = 0; /* Initial default value */
mips32->ejtag_info.isa = 0; /* isa on debug mips32, updated by poll function */
-
+ mips32->ejtag_info.config_regs = 0; /* no config register read */
return ERROR_OK;
}
/* run to exit point. return error if exit point was not reached. */
static int mips32_run_and_wait(struct target *target, target_addr_t entry_point,
- int timeout_ms, target_addr_t exit_point, struct mips32_common *mips32)
+ unsigned int timeout_ms, target_addr_t exit_point, struct mips32_common *mips32)
{
uint32_t pc;
int retval;
return ERROR_TARGET_TIMEOUT;
}
- pc = buf_get_u32(mips32->core_cache->reg_list[MIPS32_PC].value, 0, 32);
+ pc = buf_get_u32(mips32->core_cache->reg_list[MIPS32_REGLIST_C0_PC_INDEX].value, 0, 32);
if (exit_point && (pc != exit_point)) {
LOG_DEBUG("failed algorithm halted at 0x%" PRIx32 " ", pc);
return ERROR_TARGET_TIMEOUT;
int mips32_run_algorithm(struct target *target, int num_mem_params,
struct mem_param *mem_params, int num_reg_params,
struct reg_param *reg_params, target_addr_t entry_point,
- target_addr_t exit_point, int timeout_ms, void *arch_info)
+ target_addr_t exit_point, unsigned int timeout_ms, void *arch_info)
{
struct mips32_common *mips32 = target_to_mips32(target);
struct mips32_algorithm *mips32_algorithm_info = arch_info;
}
if (target->state != TARGET_HALTED) {
- LOG_WARNING("target not halted");
+ LOG_TARGET_ERROR(target, "not halted (run target algo)");
return ERROR_TARGET_NOT_HALTED;
}
}
for (int i = 0; i < num_mem_params; i++) {
+ if (mem_params[i].direction == PARAM_IN)
+ continue;
retval = target_write_buffer(target, mem_params[i].address,
mem_params[i].size, mem_params[i].value);
if (retval != ERROR_OK)
}
for (int i = 0; i < num_reg_params; i++) {
- struct reg *reg = register_get_by_name(mips32->core_cache, reg_params[i].reg_name, 0);
+ if (reg_params[i].direction == PARAM_IN)
+ continue;
+
+ struct reg *reg = register_get_by_name(mips32->core_cache, reg_params[i].reg_name, false);
if (!reg) {
LOG_ERROR("BUG: register '%s' not found", reg_params[i].reg_name);
for (int i = 0; i < num_reg_params; i++) {
if (reg_params[i].direction != PARAM_OUT) {
- struct reg *reg = register_get_by_name(mips32->core_cache, reg_params[i].reg_name, 0);
+ struct reg *reg = register_get_by_name(mips32->core_cache, reg_params[i].reg_name, false);
if (!reg) {
LOG_ERROR("BUG: register '%s' not found", reg_params[i].reg_name);
return ERROR_COMMAND_SYNTAX_ERROR;
mips32->core_cache->reg_list[i].name, context[i]);
buf_set_u32(mips32->core_cache->reg_list[i].value,
0, 32, context[i]);
- mips32->core_cache->reg_list[i].valid = 1;
- mips32->core_cache->reg_list[i].dirty = 1;
+ mips32->core_cache->reg_list[i].valid = true;
+ mips32->core_cache->reg_list[i].dirty = true;
}
}
return ERROR_OK;
}
+/* read processor identification cp0 register */
+static int mips32_read_c0_prid(struct target *target)
+{
+ struct mips32_common *mips32 = target_to_mips32(target);
+ struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
+ int retval;
+
+ retval = mips32_cp0_read(ejtag_info, &mips32->prid, 15, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("processor id not available, failed to read cp0 PRId register");
+ mips32->prid = 0;
+ }
+
+ return retval;
+}
+
+/**
+ * mips32_find_cpu_by_prid - Find CPU information by processor ID.
+ * @param[in] prid: Processor ID of the CPU.
+ *
+ * @brief This function looks up the CPU entry in the mips32_cpu_entry array based on the provided
+ * processor ID. It also handles special cases like AMD/Alchemy CPUs that use Company Options
+ * instead of Processor IDs.
+ *
+ * @return Pointer to the corresponding cpu_entry struct, or the 'unknown' entry if not found.
+ */
+static const struct cpu_entry *mips32_find_cpu_by_prid(uint32_t prid)
+{
+ /* AMD/Alchemy CPU uses Company Options instead of Processor ID.
+ * Therefore an extra transform step for prid to map it to an assigned ID,
+ */
+ if ((prid & PRID_COMP_MASK) == PRID_COMP_ALCHEMY) {
+ /* Clears Processor ID field, then put Company Option field to its place */
+ prid = (prid & 0xFFFF00FF) | ((prid & 0xFF000000) >> 16);
+ }
+
+ /* Mask out Company Option */
+ prid &= 0x00FFFFFF;
+
+ for (unsigned int i = 0; i < MIPS32_NUM_CPU_ENTRIES; i++) {
+ const struct cpu_entry *entry = &mips32_cpu_entry[i];
+ if ((entry->prid & MIPS32_CORE_MASK) <= prid && prid <= entry->prid)
+ return entry;
+ }
+
+ /* If nothing matched, then return unknown entry */
+ return &mips32_cpu_entry[MIPS32_NUM_CPU_ENTRIES - 1];
+}
+
+static bool mips32_cpu_is_lexra(struct mips_ejtag *ejtag_info)
+{
+ return (ejtag_info->prid & PRID_COMP_MASK) == PRID_COMP_LEXRA;
+}
+
+static int mips32_cpu_get_release(struct mips_ejtag *ejtag_info)
+{
+ return (ejtag_info->config[0] & MIPS32_CONFIG0_AR_MASK) >> MIPS32_CONFIG0_AR_SHIFT;
+}
+
+/**
+ * mips32_cpu_support_sync - Checks CPU supports ordering
+ * @param[in] ejtag_info: MIPS EJTAG information structure.
+ *
+ * @brief MIPS ISA implemented on Lexra CPUs is MIPS-I, similar to R3000,
+ * which does not have the SYNC instruction alone with unaligned
+ * load/store instructions.
+ *
+ * @returns true if current CPU supports sync instruction(CPU is not Lexra)
+*/
+bool mips32_cpu_support_sync(struct mips_ejtag *ejtag_info)
+{
+ return !mips32_cpu_is_lexra(ejtag_info);
+}
+
+/**
+ * mips32_cpu_support_hazard_barrier - Checks CPU supports hazard barrier
+ * @param[in] ejtag_info: MIPS EJTAG information structure.
+ *
+ * @brief hazard barrier instructions EHB and *.HB was introduced to MIPS from release 2.
+ *
+ * @returns true if current CPU supports hazard barrier(release > 1)
+*/
+bool mips32_cpu_support_hazard_barrier(struct mips_ejtag *ejtag_info)
+{
+ return mips32_cpu_get_release(ejtag_info) > MIPS32_RELEASE_1;
+}
+
+/**
+ * mips32_cpu_probe - Detects processor type and applies necessary quirks.
+ * @param[in] target: The target CPU to probe.
+ *
+ * @brief This function probes the CPU, reads its PRID (Processor ID), and determines the CPU type.
+ * It applies any quirks necessary for specific processor types.
+ *
+ * NOTE: The proper detection of certain CPUs can become quite complicated.
+ * Please consult the following Linux kernel code when adding new CPUs:
+ * arch/mips/include/asm/cpu.h
+ * arch/mips/kernel/cpu-probe.c
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+int mips32_cpu_probe(struct target *target)
+{
+ struct mips32_common *mips32 = target_to_mips32(target);
+ int retval;
+
+ if (mips32->prid)
+ return ERROR_OK; /* Already probed once, return early. */
+
+ retval = mips32_read_c0_prid(target);
+ if (retval != ERROR_OK)
+ return retval;
+
+ const struct cpu_entry *entry = mips32_find_cpu_by_prid(mips32->prid);
+
+ switch (mips32->prid & PRID_COMP_MASK) {
+ case PRID_COMP_INGENIC_E1:
+ switch (mips32->prid & PRID_IMP_MASK) {
+ case PRID_IMP_XBURST_REV1:
+ mips32->cpu_quirks |= EJTAG_QUIRK_PAD_DRET;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ /* Determine which CP0 registers are available in the current processor core */
+ case PRID_COMP_MTI:
+ switch (entry->prid & PRID_IMP_MASK) {
+ case PRID_IMP_MAPTIV_UC:
+ mips32->cp0_mask = MIPS_CP0_MAPTIV_UC;
+ break;
+ case PRID_IMP_MAPTIV_UP:
+ case PRID_IMP_M5150:
+ mips32->cp0_mask = MIPS_CP0_MAPTIV_UP;
+ break;
+ case PRID_IMP_IAPTIV:
+ case PRID_IMP_IAPTIV_CM:
+ mips32->cp0_mask = MIPS_CP0_IAPTIV;
+ break;
+ default:
+ /* CP0 mask should be the same as MK4 by default */
+ mips32->cp0_mask = MIPS_CP0_MK4;
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ mips32->cpu_info = entry;
+ LOG_DEBUG("CPU: %s (PRId %08x)", entry->cpu_name, mips32->prid);
+
+ return ERROR_OK;
+}
+
+/* reads dsp implementation info from CP0 Config3 register {DSPP, DSPREV}*/
+static void mips32_read_config_dsp(struct mips32_common *mips32, struct mips_ejtag *ejtag_info)
+{
+ uint32_t dsp_present = ((ejtag_info->config[3] & MIPS32_CONFIG3_DSPP_MASK) >> MIPS32_CONFIG3_DSPP_SHIFT);
+ if (dsp_present) {
+ mips32->dsp_imp = ((ejtag_info->config[3] & MIPS32_CONFIG3_DSPREV_MASK) >> MIPS32_CONFIG3_DSPREV_SHIFT) + 1;
+ LOG_USER("DSP implemented: %s, rev %d", "yes", mips32->dsp_imp);
+ } else {
+ LOG_USER("DSP implemented: %s", "no");
+ }
+}
+
+/* read fpu implementation info from CP0 Config1 register {CU1, FP}*/
+static int mips32_read_config_fpu(struct mips32_common *mips32, struct mips_ejtag *ejtag_info)
+{
+ int retval;
+ uint32_t fp_imp = (ejtag_info->config[1] & MIPS32_CONFIG1_FP_MASK) >> MIPS32_CONFIG1_FP_SHIFT;
+ char buf[60] = {0};
+ if (!fp_imp) {
+ LOG_USER("FPU implemented: %s", "no");
+ mips32->fp_imp = MIPS32_FP_IMP_NONE;
+ return ERROR_OK;
+ }
+ uint32_t fir_value, status_value;
+ bool fpu_in_64bit, fp_enabled;
+
+ retval = mips32_cp0_read(ejtag_info, &status_value, MIPS32_C0_STATUS, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to read cp0 status register");
+ return retval;
+ }
+
+ fpu_in_64bit = (status_value & BIT(MIPS32_CP0_STATUS_FR_SHIFT)) != 0;
+ fp_enabled = (status_value & BIT(MIPS32_CP0_STATUS_CU1_SHIFT)) != 0;
+ if (fp_enabled) {
+ retval = mips32_cp1_control_read(ejtag_info, &fir_value, 0);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to read cp1 FIR register");
+ return retval;
+ }
+
+ if ((fir_value >> MIPS32_CP1_FIR_F64_SHIFT) & 0x1)
+ fp_imp++;
+ } else {
+ /* This is the only condition that writes to buf */
+ snprintf(buf, sizeof(buf), "yes, disabled");
+ fp_imp = MIPS32_FP_IMP_UNKNOWN;
+ }
+
+ mips32->fpu_in_64bit = fpu_in_64bit;
+ mips32->fpu_enabled = fp_enabled;
+
+ mips32_set_all_fpr_width(mips32, fpu_in_64bit);
+
+ /* If fpu is not disabled, print out more information */
+ if (!buf[0])
+ snprintf(buf, sizeof(buf), "yes, %sbit (%s, working in %sbit)",
+ fp_imp == MIPS32_FP_IMP_64 ? "64" : "32",
+ fp_enabled ? "enabled" : "disabled",
+ fpu_in_64bit ? "64" : "32");
+
+ LOG_USER("FPU implemented: %s", buf);
+ mips32->fp_imp = fp_imp;
+
+ return ERROR_OK;
+}
+
+/**
+ * mips32_read_config_fdc - Read Fast Debug Channel configuration
+ * @param[in,out] mips32: MIPS32 common structure
+ * @param[in] ejtag_info: EJTAG information structure
+ * @param[in] dcr: Device Configuration Register value
+ *
+ * @brief Checks if the current target implements the Common Device Memory Map (CDMM) and Fast Debug Channel (FDC).
+ *
+ * This function examines the configuration registers and the Device Configuration Register (DCR) to determine
+ * if the current MIPS32 target supports the Common Device Memory Map (CDMM) and the Fast Debug Channel (FDC).
+ * If supported, it sets the corresponding flags in the MIPS32 common structure. \n
+ *
+ * NOTE:These are defined on MD00090, page 67 and MD00047F, page 82, respectively.
+ * MIPS Documents are pretty much all available online,
+ * it should pop up first when you search "MDxxxxx"
+ */
+static void mips32_read_config_fdc(struct mips32_common *mips32, struct mips_ejtag *ejtag_info, uint32_t dcr)
+{
+ if (((ejtag_info->config[3] & MIPS32_CONFIG3_CDMM_MASK) != 0) && ((dcr & EJTAG_DCR_FDC) != 0)) {
+ mips32->fdc = 1;
+ mips32->semihosting = 1;
+ } else {
+ mips32->fdc = 0;
+ mips32->semihosting = 0;
+ }
+}
+
+/* read config to config3 cp0 registers and log isa implementation */
+int mips32_read_config_regs(struct target *target)
+{
+ struct mips32_common *mips32 = target_to_mips32(target);
+ struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
+ char buf[60] = {0};
+ int retval;
+
+ if (ejtag_info->config_regs == 0)
+ for (int i = 0; i != 4; i++) {
+ retval = mips32_cp0_read(ejtag_info, &ejtag_info->config[i], 16, i);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("isa info not available, failed to read cp0 config register: %" PRId32, i);
+ ejtag_info->config_regs = 0;
+ return retval;
+ }
+ ejtag_info->config_regs = i + 1;
+ if ((ejtag_info->config[i] & (1 << 31)) == 0)
+ break; /* no more config registers implemented */
+ }
+ else
+ return ERROR_OK; /* already successfully read */
+
+ LOG_DEBUG("read %"PRIu32" config registers", ejtag_info->config_regs);
+
+ mips32->isa_rel = (ejtag_info->config[0] & MIPS32_CONFIG0_AR_MASK) >> MIPS32_CONFIG0_AR_SHIFT;
+ snprintf(buf, sizeof(buf), ", release %s(AR=%d)",
+ mips32->isa_rel == MIPS32_RELEASE_1 ? "1"
+ : mips32->isa_rel == MIPS32_RELEASE_2 ? "2"
+ : mips32->isa_rel == MIPS32_RELEASE_6 ? "6"
+ : "unknown", mips32->isa_rel);
+
+ if (ejtag_info->impcode & EJTAG_IMP_MIPS16) {
+ mips32->isa_imp = MIPS32_MIPS16;
+ LOG_USER("ISA implemented: %s%s", "MIPS32, MIPS16", buf);
+ } else if (ejtag_info->config_regs >= 4) { /* config3 implemented */
+ unsigned isa_imp = (ejtag_info->config[3] & MIPS32_CONFIG3_ISA_MASK) >> MIPS32_CONFIG3_ISA_SHIFT;
+ if (isa_imp == 1) {
+ mips32->isa_imp = MMIPS32_ONLY;
+ LOG_USER("ISA implemented: %s%s", "microMIPS32", buf);
+
+ } else if (isa_imp != 0) {
+ mips32->isa_imp = MIPS32_MMIPS32;
+ LOG_USER("ISA implemented: %s%s", "MIPS32, microMIPS32", buf);
+ }
+ } else if (mips32->isa_imp == MIPS32_ONLY) {
+ /* initial default value */
+ LOG_USER("ISA implemented: %s%s", "MIPS32", buf);
+ }
+
+ /* Retrieve DSP info */
+ mips32_read_config_dsp(mips32, ejtag_info);
+
+ /* Retrieve if Float Point CoProcessor Implemented */
+ retval = mips32_read_config_fpu(mips32, ejtag_info);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("fpu info is not available, error while reading cp0 status");
+ mips32->fp_imp = MIPS32_FP_IMP_NONE;
+ return retval;
+ }
+
+ uint32_t dcr;
+
+ retval = target_read_u32(target, EJTAG_DCR, &dcr);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("failed to read EJTAG_DCR register");
+ return retval;
+ }
+
+ /* Determine if FDC and CDMM are implemented for this core */
+ mips32_read_config_fdc(mips32, ejtag_info, dcr);
+
+ return ERROR_OK;
+}
+
int mips32_checksum_memory(struct target *target, target_addr_t address,
uint32_t count, uint32_t *checksum)
{
return retval;
mips32_info.common_magic = MIPS32_COMMON_MAGIC;
- mips32_info.isa_mode = MIPS32_ISA_MIPS32;
+ mips32_info.isa_mode = isa ? MIPS32_ISA_MMIPS32 : MIPS32_ISA_MIPS32; /* run isa as in debug mode */
init_reg_param(®_params[0], "r4", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
init_reg_param(®_params[1], "r5", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, count);
- int timeout = 20000 * (1 + (count / (1024 * 1024)));
+ unsigned int timeout = 20000 * (1 + (count / (1024 * 1024)));
- /* same isa as in debug mode */
- retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
- crc_algorithm->address | isa,
- (crc_algorithm->address + (sizeof(mips_crc_code) - 4)) | isa,
- timeout, &mips32_info);
+ retval = target_run_algorithm(target, 0, NULL, 2, reg_params, crc_algorithm->address,
+ crc_algorithm->address + (sizeof(mips_crc_code) - 4), timeout, &mips32_info);
if (retval == ERROR_OK)
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
/** Checks whether a memory region is erased. */
int mips32_blank_check_memory(struct target *target,
- target_addr_t address, uint32_t count, uint32_t *blank, uint8_t erased_value)
+ struct target_memory_check_block *blocks, int num_blocks,
+ uint8_t erased_value)
{
struct working_area *erase_check_algorithm;
struct reg_param reg_params[3];
int retval = target_write_buffer(target, erase_check_algorithm->address,
sizeof(erase_check_code), erase_check_code_8);
if (retval != ERROR_OK)
- return retval;
+ goto cleanup;
mips32_info.common_magic = MIPS32_COMMON_MAGIC;
- mips32_info.isa_mode = MIPS32_ISA_MIPS32;
+ mips32_info.isa_mode = isa ? MIPS32_ISA_MMIPS32 : MIPS32_ISA_MIPS32;
init_reg_param(®_params[0], "r4", 32, PARAM_OUT);
- buf_set_u32(reg_params[0].value, 0, 32, address);
+ buf_set_u32(reg_params[0].value, 0, 32, blocks[0].address);
init_reg_param(®_params[1], "r5", 32, PARAM_OUT);
- buf_set_u32(reg_params[1].value, 0, 32, count);
+ buf_set_u32(reg_params[1].value, 0, 32, blocks[0].size);
init_reg_param(®_params[2], "r6", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, erased_value);
- /* same isa as in debug mode */
- retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
- erase_check_algorithm->address | isa,
- (erase_check_algorithm->address + (sizeof(erase_check_code) - 4)) | isa,
- 10000, &mips32_info);
+ retval = target_run_algorithm(target, 0, NULL, 3, reg_params, erase_check_algorithm->address,
+ erase_check_algorithm->address + (sizeof(erase_check_code) - 4), 10000, &mips32_info);
if (retval == ERROR_OK)
- *blank = buf_get_u32(reg_params[2].value, 0, 32);
+ blocks[0].result = buf_get_u32(reg_params[2].value, 0, 32);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
+cleanup:
target_free_working_area(target, erase_check_algorithm);
- return retval;
+ if (retval != ERROR_OK)
+ return retval;
+
+ return 1; /* only one block has been checked */
}
-static int mips32_verify_pointer(struct command_context *cmd_ctx,
+static int mips32_verify_pointer(struct command_invocation *cmd,
struct mips32_common *mips32)
{
if (mips32->common_magic != MIPS32_COMMON_MAGIC) {
- command_print(cmd_ctx, "target is not an MIPS32");
+ command_print(cmd, "target is not an MIPS32");
return ERROR_TARGET_INVALID;
}
return ERROR_OK;
}
/**
- * MIPS32 targets expose command interface
- * to manipulate CP0 registers
+ * mips32_read_config_mmu - Reads MMU configuration and logs relevant information.
+ * @param[in] ejtag_info: EJTAG interface information.
+ *
+ * @brief Reads the MMU configuration from the CP0 register and calculates the number of TLB entries,
+ * ways, and sets. Handles different MMU types like VTLB only, root RPU/Fixed, and VTLB and FTLB.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_read_config_mmu(struct mips_ejtag *ejtag_info)
+{
+ uint32_t config4, tlb_entries = 0, ways = 0, sets = 0;
+ uint32_t config0 = ejtag_info->config[0];
+ uint32_t config1 = ejtag_info->config[1];
+ uint32_t config3 = ejtag_info->config[3];
+ uint32_t mmu_type = (config0 >> 7) & 7;
+ uint32_t vz_present = (config3 & BIT(23));
+
+ int retval = mips32_cp0_read(ejtag_info, &config4, 16, 4);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* mmu type = 1: VTLB only (Note: Does not account for Config4.ExtVTLB)
+ * mmu type = 3: root RPU/Fixed (Note: Only valid with VZ ASE)
+ * mmu type = 4: VTLB and FTLB
+ */
+ if ((mmu_type == 1 || mmu_type == 4) || (mmu_type == 3 && vz_present)) {
+ tlb_entries = (uint32_t)(((config1 >> 25) & 0x3f) + 1);
+ if (mmu_type == 4) {
+ /* Release 6 definition for Config4[0:15] (MD01251, page 243) */
+ /* The FTLB ways field is defined as [2, 3, 4, 5, 6, 7, 8, ...0 (reserved)] */
+ int index = ((config4 >> 4) & 0xf);
+ ways = index > 6 ? 0 : index + 2;
+
+ /* The FTLB sets field is defined as [1, 2, 4, 8, ..., 16384, 32768] (powers of 2) */
+ index = (config4 & 0xf);
+ sets = 1 << index;
+ tlb_entries = tlb_entries + (ways * sets);
+ }
+ }
+ LOG_USER("TLB Entries: %d (%d ways, %d sets per way)", tlb_entries, ways, sets);
+
+ return ERROR_OK;
+}
+
+/**
+ * mips32_cp0_find_register_by_name - Find CP0 register by its name.
+ * @param[in] cp0_mask: Mask to filter out irrelevant registers.
+ * @param[in] reg_name: Name of the register to find.
+ *
+ * @brief This function iterates through mips32_cp0_regs to find a register
+ * matching reg_name, considering cp0_mask to filter out registers
+ * not relevant for the current core.
+ *
+ * @return Pointer to the found register, or NULL if not found.
+ */
+static const struct mips32_cp0 *mips32_cp0_find_register_by_name(uint32_t cp0_mask, const char *reg_name)
+{
+ if (reg_name)
+ for (unsigned int i = 0; i < MIPS32NUMCP0REGS; i++) {
+ if ((mips32_cp0_regs[i].core & cp0_mask) == 0)
+ continue;
+
+ if (strcmp(mips32_cp0_regs[i].name, reg_name) == 0)
+ return &mips32_cp0_regs[i];
+ }
+ return NULL;
+}
+
+/**
+ * mips32_cp0_get_all_regs - Print all CP0 registers and their values.
+ * @param[in] cmd: Command invocation context.
+ * @param[in] ejtag_info: EJTAG interface information.
+ * @param[in] cp0_mask: Mask to identify relevant registers.
+ *
+ * @brief Iterates over all CP0 registers, reads their values, and prints them.
+ * Only considers registers relevant to the current core, as defined by cp0_mask.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_cp0_get_all_regs(struct command_invocation *cmd, struct mips_ejtag *ejtag_info, uint32_t cp0_mask)
+{
+ uint32_t value;
+
+ for (unsigned int i = 0; i < MIPS32NUMCP0REGS; i++) {
+ /* Register name not valid for this core */
+ if ((mips32_cp0_regs[i].core & cp0_mask) == 0)
+ continue;
+
+ int retval = mips32_cp0_read(ejtag_info, &value, mips32_cp0_regs[i].reg, mips32_cp0_regs[i].sel);
+ if (retval != ERROR_OK) {
+ command_print(CMD, "Error: couldn't access reg %s", mips32_cp0_regs[i].name);
+ return retval;
+ }
+
+ command_print(CMD, "%*s: 0x%8.8" PRIx32, 14, mips32_cp0_regs[i].name, value);
+ }
+ return ERROR_OK;
+}
+
+/**
+ * mips32_cp0_get_reg_by_name - Read and print a CP0 register's value by name.
+ * @param[in] cmd: Command invocation context.
+ * @param[in] ejtag_info: EJTAG interface information.
+ * @param[in] cp0_mask: Mask to identify relevant registers.
+ *
+ * @brief Finds a CP0 register by name, reads its value, and prints it.
+ * Handles error scenarios like register not found or read failure.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_cp0_get_reg_by_name(struct command_invocation *cmd, struct mips_ejtag *ejtag_info, uint32_t cp0_mask)
+{
+ const struct mips32_cp0 *cp0_regs = mips32_cp0_find_register_by_name(cp0_mask, CMD_ARGV[0]);
+ if (!cp0_regs) {
+ command_print(CMD, "Error: Register '%s' not found", CMD_ARGV[0]);
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ uint32_t value;
+ int retval = mips32_cp0_read(ejtag_info, &value, cp0_regs->reg, cp0_regs->sel);
+ if (retval != ERROR_OK) {
+ command_print(CMD, "Error: Encounter an Error while reading cp0 reg %d sel %d",
+ cp0_regs->reg, cp0_regs->sel);
+ return retval;
+ }
+
+ command_print(CMD, "0x%8.8" PRIx32, value);
+ return ERROR_OK;
+}
+
+/**
+ * mips32_cp0_get_reg_by_number - Read and print a CP0 register's value by number.
+ * @param[in] cmd: Command invocation context.
+ * @param[in] ejtag_info: EJTAG interface information.
+ *
+ * @brief Reads a specific CP0 register (identified by number and selection) and prints its value.
+ * The register number and selection are parsed from the command arguments.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_cp0_get_reg_by_number(struct command_invocation *cmd, struct mips_ejtag *ejtag_info)
+{
+ uint32_t cp0_reg, cp0_sel, value;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], cp0_reg);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], cp0_sel);
+
+ int retval = mips32_cp0_read(ejtag_info, &value, cp0_reg, cp0_sel);
+ if (retval != ERROR_OK) {
+ command_print(CMD,
+ "Error: couldn't access reg %" PRIu32,
+ cp0_reg);
+ return retval;
+ }
+
+ command_print(CMD, "cp0 reg %" PRIu32 ", select %" PRIu32 ": %8.8" PRIx32,
+ cp0_reg, cp0_sel, value);
+ return ERROR_OK;
+}
+
+/**
+ * mips32_cp0_set_reg_by_name - Write to a CP0 register identified by name.
+ * @param[in] cmd: Command invocation context.
+ * @param[in] mips32: Common MIPS32 data structure.
+ * @param[in] ejtag_info: EJTAG interface information.
+ *
+ * @brief Writes a value to a CP0 register specified by name. Updates internal
+ * cache if specific registers (STATUS, CAUSE, DEPC, GUESTCTL1) are modified.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_cp0_set_reg_by_name(struct command_invocation *cmd,
+ struct mips32_common *mips32, struct mips_ejtag *ejtag_info)
+{
+ const struct mips32_cp0 *cp0_regs = mips32_cp0_find_register_by_name(mips32->cp0_mask, CMD_ARGV[0]);
+ if (!cp0_regs) {
+ command_print(CMD, "Error: Register '%s' not found", CMD_ARGV[0]);
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+
+ uint32_t value;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
+
+ if (cp0_regs->reg == MIPS32_C0_STATUS && cp0_regs->sel == 0) {
+ /* Update cached Status register if user is writing to Status */
+ mips32->core_regs.cp0[MIPS32_REG_C0_STATUS_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_STATUS_INDEX].dirty = 1;
+ } else if (cp0_regs->reg == MIPS32_C0_CAUSE && cp0_regs->sel == 0) {
+ /* Update register cache with new value if its Cause */
+ mips32->core_regs.cp0[MIPS32_REG_C0_CAUSE_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_CAUSE_INDEX].dirty = 1;
+ } else if (cp0_regs->reg == MIPS32_C0_DEPC && cp0_regs->sel == 0) {
+ /* Update cached PC if its DEPC */
+ mips32->core_regs.cp0[MIPS32_REG_C0_PC_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_PC_INDEX].dirty = 1;
+ } else if (cp0_regs->reg == MIPS32_C0_GUESTCTL1 && cp0_regs->sel == 4) {
+ /* Update cached guestCtl1 */
+ mips32->core_regs.cp0[MIPS32_REG_C0_GUESTCTL1_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_GUESTCTL1_INDEX].dirty = 1;
+ }
+
+ int retval = mips32_cp0_write(ejtag_info, value,
+ cp0_regs->reg,
+ cp0_regs->sel);
+ if (retval != ERROR_OK) {
+ command_print(CMD, "Error: Encounter an Error while writing to cp0 reg %d, sel %d",
+ cp0_regs->reg, cp0_regs->sel);
+ return retval;
+ }
+
+ command_print(CMD, "cp0 reg %s (%u, select %u: %8.8" PRIx32 ")",
+ CMD_ARGV[0], cp0_regs->reg, cp0_regs->sel, value);
+ return ERROR_OK;
+}
+
+/**
+ * mips32_cp0_set_reg_by_number - Write to a CP0 register identified by number.
+ * @param[in] cmd: Command invocation context.
+ * @param[in] mips32: Common MIPS32 data structure.
+ * @param[in] ejtag_info: EJTAG interface information.
+ *
+ * @brief Writes a value to a CP0 register specified by number and selection.
+ * Handles special cases like updating the internal cache for certain registers.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_cp0_set_reg_by_number(struct command_invocation *cmd,
+ struct mips32_common *mips32, struct mips_ejtag *ejtag_info)
+{
+ uint32_t cp0_reg, cp0_sel, value;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], cp0_reg);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], cp0_sel);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value);
+
+ if (cp0_reg == MIPS32_C0_STATUS && cp0_sel == 0) {
+ /* Update cached status register if user is writing to Status register */
+ mips32->core_regs.cp0[MIPS32_REG_C0_STATUS_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_STATUS_INDEX].dirty = 1;
+ } else if (cp0_reg == MIPS32_C0_CAUSE && cp0_sel == 0) {
+ /* Update register cache with new value if its Cause register */
+ mips32->core_regs.cp0[MIPS32_REG_C0_CAUSE_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_CAUSE_INDEX].dirty = 1;
+ } else if (cp0_reg == MIPS32_C0_DEPC && cp0_sel == 0) {
+ /* Update cached PC if its DEPC */
+ mips32->core_regs.cp0[MIPS32_REG_C0_PC_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_PC_INDEX].dirty = 1;
+ } else if (cp0_reg == MIPS32_C0_GUESTCTL1 && cp0_sel == 4) {
+ /* Update cached guestCtl1, too */
+ mips32->core_regs.cp0[MIPS32_REG_C0_GUESTCTL1_INDEX] = value;
+ mips32->core_cache->reg_list[MIPS32_REGLIST_C0_GUESTCTL1_INDEX].dirty = 1;
+ }
+
+ int retval = mips32_cp0_write(ejtag_info, value, cp0_reg, cp0_sel);
+ if (retval != ERROR_OK) {
+ command_print(CMD,
+ "Error: couldn't access cp0 reg %" PRIu32 ", select %" PRIu32,
+ cp0_reg, cp0_sel);
+ return retval;
+ }
+
+ command_print(CMD, "cp0 reg %" PRIu32 ", select %" PRIu32 ": %8.8" PRIx32,
+ cp0_reg, cp0_sel, value);
+ return ERROR_OK;
+}
+
+/**
+ * mips32_handle_cp0_command - Handle commands related to CP0 registers.
+ * @cmd: Command invocation context.
+ *
+ * Orchestrates different operations on CP0 registers based on the command arguments.
+ * Supports operations like reading all registers, reading/writing a specific register
+ * by name or number.
+ *
+ * Return: ERROR_OK on success; error code on failure.
*/
COMMAND_HANDLER(mips32_handle_cp0_command)
+{
+ int retval, tmp;
+ struct target *target = get_current_target(CMD_CTX);
+ struct mips32_common *mips32 = target_to_mips32(target);
+ struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
+
+
+ retval = mips32_verify_pointer(CMD, mips32);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (target->state != TARGET_HALTED) {
+ command_print(CMD, "Error: target must be stopped for \"%s\" command", CMD_NAME);
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ switch (CMD_ARGC) {
+ case 0: /* No arg => print out all cp0 regs */
+ retval = mips32_cp0_get_all_regs(CMD, ejtag_info, mips32->cp0_mask);
+ break;
+ case 1: /* 1 arg => get cp0 #reg/#sel value by name */
+ retval = mips32_cp0_get_reg_by_name(CMD, ejtag_info, mips32->cp0_mask);
+ break;
+ case 2: /* 2 args => get cp0 reg/sel value or set value by name */
+ tmp = *CMD_ARGV[0];
+ if (isdigit(tmp)) /* starts from number then args are #reg and #sel */
+ retval = mips32_cp0_get_reg_by_number(CMD, ejtag_info);
+ else /* or set value by register name */
+ retval = mips32_cp0_set_reg_by_name(CMD, mips32, ejtag_info);
+
+ break;
+ case 3: /* 3 args => set cp0 reg/sel value*/
+ retval = mips32_cp0_set_reg_by_number(CMD, mips32, ejtag_info);
+ break;
+ default: /* Other argc => err */
+ retval = ERROR_COMMAND_SYNTAX_ERROR;
+ break;
+ }
+
+ return retval;
+}
+
+/**
+ * mips32_dsp_enable - Enable access to DSP registers
+ * @param[in] ctx: Context information for the pracc queue
+ * @param[in] isa: Instruction Set Architecture identifier
+ *
+ * @brief Enables access to DSP registers by modifying the status register.
+ *
+ * This function adds instructions to the context queue for enabling
+ * access to DSP registers by modifying the status register.
+ */
+static void mips32_dsp_enable(struct pracc_queue_info *ctx, int isa)
+{
+ /* Save Status Register */
+ /* move status to $9 (t1) 2*/
+ pracc_add(ctx, 0, MIPS32_MFC0(isa, 9, 12, 0));
+
+ /* Read it again in order to modify it */
+ /* move status to $0 (t0) 3*/
+ pracc_add(ctx, 0, MIPS32_MFC0(isa, 8, 12, 0));
+
+ /* Enable access to DSP registers by setting MX bit in status register */
+ /* $15 = MIPS32_PRACC_STACK 4/5/6*/
+ pracc_add(ctx, 0, MIPS32_LUI(isa, 15, UPPER16(MIPS32_DSP_ENABLE)));
+ pracc_add(ctx, 0, MIPS32_ORI(isa, 15, 15, LOWER16(MIPS32_DSP_ENABLE)));
+ pracc_add(ctx, 0, MIPS32_ISA_OR(8, 8, 15));
+ /* Enable DSP - update status registers 7*/
+ pracc_add(ctx, 0, MIPS32_MTC0(isa, 8, 12, 0));
+}
+
+/**
+ * mips32_dsp_restore - Restore DSP status registers to the previous setting
+ * @param[in] ctx: Context information pracc queue
+ * @param[in] isa: isa identifier
+ *
+ * @brief Restores the DSP status registers to their previous setting.
+ *
+ * This function adds instructions to the context queue for restoring the DSP
+ * status registers to their values before the operation.
+ */
+static void mips32_dsp_restore(struct pracc_queue_info *ctx, int isa)
+{
+ pracc_add(ctx, 0, MIPS32_MTC0(isa, 9, 12, 0)); /* Restore status registers to previous setting */
+ pracc_add(ctx, 0, MIPS32_NOP); /* nop */
+}
+
+/**
+ * mips32_pracc_read_dsp_reg - Read a value from a MIPS32 DSP register
+ * @param[in] ejtag_info: EJTAG information structure
+ * @param[out] val: Pointer to store the read value
+ * @param[in] reg: Index of the DSP register to read
+ *
+ * @brief Reads the value from the specified MIPS32 DSP register using EJTAG access.
+ *
+ * This function initiates a sequence of instructions to read the value from the
+ * specified DSP register. It will enable dsp module if its not enabled
+ * and restoring the status registers after the read operation.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_pracc_read_dsp_reg(struct mips_ejtag *ejtag_info, uint32_t *val, uint32_t reg)
+{
+ int isa = 0;
+
+ struct pracc_queue_info ctx = {
+ .max_code = 48,
+ .ejtag_info = ejtag_info
+ };
+
+ uint32_t dsp_read_code[] = {
+ MIPS32_MFHI(isa, t0), /* mfhi t0 ($ac0) - OPCODE - 0x00004010 */
+ MIPS32_DSP_MFHI(t0, 1), /* mfhi t0,$ac1 - OPCODE - 0x00204010 */
+ MIPS32_DSP_MFHI(t0, 2), /* mfhi t0,$ac2 - OPCODE - 0x00404010 */
+ MIPS32_DSP_MFHI(t0, 3), /* mfhi t0,$ac3 - OPCODE - 0x00604010*/
+ MIPS32_MFLO(isa, t0), /* mflo t0 ($ac0) - OPCODE - 0x00004012 */
+ MIPS32_DSP_MFLO(t0, 1), /* mflo t0,$ac1 - OPCODE - 0x00204012 */
+ MIPS32_DSP_MFLO(t0, 2), /* mflo t0,$ac2 - OPCODE - 0x00404012 */
+ MIPS32_DSP_MFLO(t0, 3), /* mflo t0,$ac3 - OPCODE - 0x00604012 */
+ MIPS32_DSP_RDDSP(t0, 0x3F), /* rddsp t0, 0x3f (DSPCtl) - OPCODE - 0x7c3f44b8 */
+ };
+
+ /* Check status register to determine if dsp register access is enabled */
+ /* Get status register so it can be restored later */
+
+ ctx.pracc_list = NULL;
+
+ /* Init context queue */
+ pracc_queue_init(&ctx);
+
+ if (ctx.retval != ERROR_OK)
+ goto exit;
+
+ /* Enables DSP whether its already enabled or not */
+ mips32_dsp_enable(&ctx, isa);
+
+ /* move AC or Control to $8 (t0) 8*/
+ pracc_add(&ctx, 0, dsp_read_code[reg]);
+ /* Restore status registers to previous setting */
+ mips32_dsp_restore(&ctx, isa);
+
+ /* $15 = MIPS32_PRACC_BASE_ADDR 1*/
+ pracc_add(&ctx, 0, MIPS32_LUI(isa, 15, PRACC_UPPER_BASE_ADDR));
+ /* store $8 to pracc_out 10*/
+ pracc_add(&ctx, MIPS32_PRACC_PARAM_OUT, MIPS32_SW(isa, 8, PRACC_OUT_OFFSET, 15));
+ /* move COP0 DeSave to $15 11*/
+ pracc_add(&ctx, 0, MIPS32_MFC0(isa, 15, 31, 0));
+ /* restore upper 16 of $8 12*/
+ pracc_add(&ctx, 0, MIPS32_LUI(isa, 8, UPPER16(ejtag_info->reg8)));
+ /* restore lower 16 of $8 13*/
+ pracc_add(&ctx, 0, MIPS32_ORI(isa, 8, 8, LOWER16(ejtag_info->reg8)));
+ /* restore upper 16 of $9 14*/
+ pracc_add(&ctx, 0, MIPS32_LUI(isa, 9, UPPER16(ejtag_info->reg9)));
+ pracc_add(&ctx, 0, MIPS32_SYNC(isa));
+ /* jump to start 18*/
+ pracc_add(&ctx, 0, MIPS32_B(isa, NEG16(ctx.code_count + 1)));
+ /* restore lower 16 of $9 15*/
+ pracc_add(&ctx, 0, MIPS32_ORI(isa, 9, 9, LOWER16(ejtag_info->reg9)));
+
+ ctx.retval = mips32_pracc_queue_exec(ejtag_info, &ctx, val, 1);
+exit:
+ pracc_queue_free(&ctx);
+ return ctx.retval;
+}
+
+/**
+ * mips32_pracc_write_dsp_reg - Write a value to a MIPS32 DSP register
+ * @param[in] ejtag_info: EJTAG information structure
+ * @param[in] val: Value to be written to the register
+ * @param[in] reg: Index of the DSP register to write
+ *
+ * @brief Writes the specified value to the specified MIPS32 DSP register.
+ *
+ * This function initiates a sequence of instructions to write the given value to the
+ * specified DSP register.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_pracc_write_dsp_reg(struct mips_ejtag *ejtag_info, uint32_t val, uint32_t reg)
+{
+ int isa = 0;
+
+ struct pracc_queue_info ctx = {
+ .max_code = 48,
+ .ejtag_info = ejtag_info
+ };
+
+ uint32_t dsp_write_code[] = {
+ MIPS32_MTHI(isa, t0), /* mthi t0 ($ac0) - OPCODE - 0x01000011 */
+ MIPS32_DSP_MTHI(t0, 1), /* mthi t0, $ac1 - OPCODE - 0x01000811 */
+ MIPS32_DSP_MTHI(t0, 2), /* mthi t0, $ac2 - OPCODE - 0x01001011 */
+ MIPS32_DSP_MTHI(t0, 3), /* mthi t0, $ac3 - OPCODE - 0x01001811 */
+ MIPS32_MTLO(isa, t0), /* mtlo t0 ($ac0) - OPCODE - 0x01000013 */
+ MIPS32_DSP_MTLO(t0, 1), /* mtlo t0, $ac1 - OPCODE - 0x01000813 */
+ MIPS32_DSP_MTLO(t0, 2), /* mtlo t0, $ac2 - OPCODE - 0x01001013 */
+ MIPS32_DSP_MTLO(t0, 3), /* mtlo t0, $ac3 - OPCODE - 0x01001813 */
+ MIPS32_DSP_WRDSP(t0, 0x1F), /* wrdsp t0, 0x1f (DSPCtl) - OPCODE - 0x7d00fcf8*/
+ };
+
+ /* Init context queue */
+ pracc_queue_init(&ctx);
+ if (ctx.retval != ERROR_OK)
+ goto exit;
+
+ /* Enables DSP whether its already enabled or not */
+ mips32_dsp_enable(&ctx, isa);
+
+ /* Load val to $8 (t0) */
+ pracc_add(&ctx, 0, MIPS32_LUI(isa, 8, UPPER16(val)));
+ pracc_add(&ctx, 0, MIPS32_ORI(isa, 8, 8, LOWER16(val)));
+
+ /* move AC or Control to $8 (t0) */
+ pracc_add(&ctx, 0, dsp_write_code[reg]);
+
+ /* nop, delay in order to ensure write */
+ pracc_add(&ctx, 0, MIPS32_NOP);
+ /* Restore status registers to previous setting */
+ mips32_dsp_restore(&ctx, isa);
+
+ /* move COP0 DeSave to $15 */
+ pracc_add(&ctx, 0, MIPS32_MFC0(isa, 15, 31, 0));
+
+ /* restore $8 */
+ pracc_add(&ctx, 0, MIPS32_LUI(isa, 8, UPPER16(ejtag_info->reg8)));
+ pracc_add(&ctx, 0, MIPS32_ORI(isa, 8, 8, LOWER16(ejtag_info->reg8)));
+
+ /* restore upper 16 of $9 */
+ pracc_add(&ctx, 0, MIPS32_LUI(isa, 9, UPPER16(ejtag_info->reg9)));
+
+ /* jump to start */
+ pracc_add(&ctx, 0, MIPS32_B(isa, NEG16(ctx.code_count + 1)));
+ /* restore lower 16 of $9 */
+ pracc_add(&ctx, 0, MIPS32_ORI(isa, 9, 9, LOWER16(ejtag_info->reg9)));
+
+ ctx.retval = mips32_pracc_queue_exec(ejtag_info, &ctx, NULL, 1);
+exit:
+ pracc_queue_free(&ctx);
+ return ctx.retval;
+}
+
+/**
+ * mips32_handle_cpuinfo_command - Handles the 'cpuinfo' command.
+ * @param[in] cmd: Command invocation context.
+ *
+ * @brief Executes the 'cpuinfo' command which displays detailed information about the current CPU core.
+ * This includes core type, vendor, instruction set, cache size, and other relevant details.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+COMMAND_HANDLER(mips32_handle_cpuinfo_command)
{
int retval;
struct target *target = get_current_target(CMD_CTX);
struct mips32_common *mips32 = target_to_mips32(target);
struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
+ uint32_t prid = mips32->prid; /* cp0 PRID - 15, 0 */
+ uint32_t config0 = ejtag_info->config[0]; /* cp0 config - 16, 0 */
+ uint32_t config1 = ejtag_info->config[1]; /* cp0 config - 16, 1 */
+ uint32_t config3 = ejtag_info->config[3]; /* cp0 config - 16, 3 */
+
+ /* Following configs are not read during probe */
+ uint32_t config5; /* cp0 config - 16, 5 */
+
+ /* No args for now */
+ if (CMD_ARGC != 0)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (target->state != TARGET_HALTED) {
+ command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME);
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = mips32_cp0_read(ejtag_info, &config5, 16, 5);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Determine Core info */
+ const struct cpu_entry *entry = mips32->cpu_info;
+ /* Display Core Type info */
+ command_print(CMD, "CPU Core: %s", entry->cpu_name);
+
+ /* Display Core Vendor ID if it's unknown */
+ if (entry == &mips32_cpu_entry[MIPS32_NUM_CPU_ENTRIES - 1])
+ command_print(CMD, "Vendor: Unknown CPU vendor code %x.", ((prid & 0x00ffff00) >> 16));
+ else
+ command_print(CMD, "Vendor: %s", entry->vendor);
+
+ /* If MIPS release 2 or above, then get exception base info */
+ enum mips32_isa_rel ar = mips32->isa_rel;
+ if (ar > MIPS32_RELEASE_1) { /* release 2 and above */
+ uint32_t ebase;
+ retval = mips32_cp0_read(ejtag_info, &ebase, 15, 1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ command_print(CMD, "Current CPU ID: %d", (ebase & 0x1ff));
+ } else {
+ command_print(CMD, "Current CPU ID: 0");
+ }
+
+ char *instr;
+ switch ((config3 & MIPS32_CONFIG3_ISA_MASK) >> MIPS32_CONFIG3_ISA_SHIFT) {
+ case 0:
+ instr = "MIPS32";
+ break;
+ case 1:
+ instr = "microMIPS";
+ break;
+ case 2:
+ instr = "MIPS32 (at reset) and microMIPS";
+ break;
+ case 3:
+ default:
+ instr = "microMIPS (at reset) and MIPS32";
+ break;
+ }
+
+ /* Display Instruction Set Info */
+ command_print(CMD, "Instr set: %s", instr);
+ command_print(CMD, "Instr rel: %s",
+ ar == MIPS32_RELEASE_1 ? "1"
+ : ar == MIPS32_RELEASE_2 ? "2"
+ : ar == MIPS32_RELEASE_6 ? "6"
+ : "unknown");
+ command_print(CMD, "PRId: %x", prid);
+ /* Some of MIPS CPU Revisions(for M74K) can be seen on MD00541, page 26 */
+ uint32_t rev = prid & 0x000000ff;
+ command_print(CMD, "RTL Rev: %d.%d.%d", (rev & 0xE0), (rev & 0x1C), (rev & 0x3));
+
+ command_print(CMD, "Max Number of Instr Breakpoints: %d", mips32->num_inst_bpoints);
+ command_print(CMD, "Max Number of Data Breakpoints: %d", mips32->num_data_bpoints);
+
+ /* MMU Support */
+ uint32_t mmu_type = (config0 >> 7) & 7; /* MMU Type Info */
+ char *mmu;
+ switch (mmu_type) {
+ case MIPS32_MMU_TLB:
+ mmu = "TLB";
+ break;
+ case MIPS32_MMU_BAT:
+ mmu = "BAT";
+ break;
+ case MIPS32_MMU_FIXED:
+ mmu = "FIXED";
+ break;
+ case MIPS32_MMU_DUAL_VTLB_FTLB:
+ mmu = "DUAL VAR/FIXED";
+ break;
+ default:
+ mmu = "Unknown";
+ }
+ command_print(CMD, "MMU Type: %s", mmu);
+
+ retval = mips32_read_config_mmu(ejtag_info);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Definitions of I/D Cache Sizes are available on MD01251, page 224~226 */
+ int index;
+ uint32_t ways, sets, bpl;
+
+ /* Determine Instr Cache Size */
+ /* Ways mapping = [1, 2, 3, 4, 5, 6, 7, 8] */
+ ways = ((config1 >> MIPS32_CFG1_IASHIFT) & 7);
+
+ /* Sets per way = [64, 128, 256, 512, 1024, 2048, 4096, 32] */
+ index = ((config1 >> MIPS32_CFG1_ISSHIFT) & 7);
+ sets = index == 7 ? 32 : 32 << (index + 1);
- retval = mips32_verify_pointer(CMD_CTX, mips32);
+ /* Bytes per line = [0, 4, 8, 16, 32, 64, 128, Reserved] */
+ index = ((config1 >> MIPS32_CFG1_ILSHIFT) & 7);
+ bpl = index == 0 ? 0 : 4 << (index - 1);
+ command_print(CMD, "Instr Cache: %d (%d ways, %d lines, %d byte per line)", ways * sets * bpl, ways, sets, bpl);
+
+ /* Determine data cache size, same as above */
+ ways = ((config1 >> MIPS32_CFG1_DASHIFT) & 7);
+
+ index = ((config1 >> MIPS32_CFG1_DSSHIFT) & 7);
+ sets = index == 7 ? 32 : 32 << (index + 1);
+
+ index = ((config1 >> MIPS32_CFG1_DLSHIFT) & 7);
+ bpl = index == 0 ? 0 : 4 << (index - 1);
+ command_print(CMD, " Data Cache: %d (%d ways, %d lines, %d byte per line)", ways * sets * bpl, ways, sets, bpl);
+
+ /* does the core hava FPU*/
+ mips32_read_config_fpu(mips32, ejtag_info);
+
+ /* does the core support a DSP */
+ mips32_read_config_dsp(mips32, ejtag_info);
+
+ /* VZ module */
+ uint32_t vzase = (config3 & BIT(23));
+ if (vzase)
+ command_print(CMD, "VZ implemented: yes");
+ else
+ command_print(CMD, "VZ implemented: no");
+
+ /* multithreading */
+ uint32_t mtase = (config3 & BIT(2));
+ if (mtase) {
+ command_print(CMD, "MT implemented: yes");
+
+ /* Get VPE and Thread info */
+ uint32_t tcbind;
+ uint32_t mvpconf0;
+
+ /* Read tcbind register */
+ retval = mips32_cp0_read(ejtag_info, &tcbind, 2, 2);
+ if (retval != ERROR_OK)
+ return retval;
+
+ command_print(CMD, " | Current VPE: %d", (tcbind & 0xf));
+ command_print(CMD, " | Current TC: %d", ((tcbind >> 21) & 0xff));
+
+ /* Read mvpconf0 register */
+ retval = mips32_cp0_read(ejtag_info, &mvpconf0, 0, 2);
+ if (retval != ERROR_OK)
+ return retval;
+
+ command_print(CMD, " | Total TC: %d", (mvpconf0 & 0xf) + 1);
+ command_print(CMD, " | Total VPE: %d", ((mvpconf0 >> 10) & 0xf) + 1);
+ } else {
+ command_print(CMD, "MT implemented: no");
+ }
+
+ /* MIPS SIMD Architecture (MSA) */
+ uint32_t msa = (config3 & BIT(28));
+ command_print(CMD, "MSA implemented: %s", msa ? "yes" : "no");
+
+ /* Move To/From High COP0 (MTHC0/MFHC0) instructions are implemented.
+ * Implicates current ISA release >= 5.*/
+ uint32_t mvh = (config5 & BIT(5));
+ command_print(CMD, "MVH implemented: %s", mvh ? "yes" : "no");
+
+ /* Common Device Memory Map implemented? */
+ uint32_t cdmm = (config3 & BIT(3));
+ command_print(CMD, "CDMM implemented: %s", cdmm ? "yes" : "no");
+
+ return ERROR_OK;
+}
+
+/**
+ * mips32_dsp_find_register_by_name - Find DSP register index by name
+ * @param[in] reg_name: Name of the DSP register to find
+ *
+ * @brief Searches for a DSP register by name and returns its index.
+ * If no match is found, it returns MIPS32NUMDSPREGS.
+ *
+ * @return Index of the found register or MIPS32NUMDSPREGS if not found.
+ */
+static int mips32_dsp_find_register_by_name(const char *reg_name)
+{
+ if (reg_name)
+ for (int i = 0; i < MIPS32NUMDSPREGS; i++) {
+ if (strcmp(mips32_dsp_regs[i].name, reg_name) == 0)
+ return i;
+ }
+ return MIPS32NUMDSPREGS;
+}
+
+/**
+ * mips32_dsp_get_all_regs - Get values of all MIPS32 DSP registers
+ * @param[in] cmd: Command invocation context
+ * @param[in] ejtag_info: EJTAG information structure
+ *
+ * @brief This function iterates through all DSP registers, reads their values,
+ * and prints each register name along with its corresponding value.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_dsp_get_all_regs(struct command_invocation *cmd, struct mips_ejtag *ejtag_info)
+{
+ uint32_t value = 0;
+ for (int i = 0; i < MIPS32NUMDSPREGS; i++) {
+ int retval = mips32_pracc_read_dsp_reg(ejtag_info, &value, i);
+ if (retval != ERROR_OK) {
+ command_print(CMD, "couldn't access reg %s", mips32_dsp_regs[i].name);
+ return retval;
+ }
+ command_print(CMD, "%*s: 0x%8.8x", 7, mips32_dsp_regs[i].name, value);
+ }
+ return ERROR_OK;
+}
+
+/**
+ * mips32_dsp_get_register - Get the value of a MIPS32 DSP register
+ * @param[in] cmd: Command invocation context
+ * @param[in] ejtag_info: EJTAG information structure
+ *
+ * @brief Retrieves the value of a specified MIPS32 DSP register.
+ * If the register is found, it reads the register value and prints the result.
+ * If the register is not found, it prints an error message.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_dsp_get_register(struct command_invocation *cmd, struct mips_ejtag *ejtag_info)
+{
+ uint32_t value = 0;
+ int index = mips32_dsp_find_register_by_name(CMD_ARGV[0]);
+ if (index == MIPS32NUMDSPREGS) {
+ command_print(CMD, "ERROR: register '%s' not found", CMD_ARGV[0]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ int retval = mips32_pracc_read_dsp_reg(ejtag_info, &value, index);
+ if (retval != ERROR_OK)
+ command_print(CMD, "ERROR: Could not access dsp register %s", CMD_ARGV[0]);
+ else
+ command_print(CMD, "0x%8.8x", value);
+
+ return retval;
+}
+
+/**
+ * mips32_dsp_set_register - Set the value of a MIPS32 DSP register
+ * @param[in] cmd: Command invocation context
+ * @param[in] ejtag_info: EJTAG information structure
+ *
+ * @brief Sets the value of a specified MIPS32 DSP register.
+ * If the register is found, it writes provided value to the register.
+ * If the register is not found or there is an error in writing the value,
+ * it prints an error message.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+static int mips32_dsp_set_register(struct command_invocation *cmd, struct mips_ejtag *ejtag_info)
+{
+ uint32_t value;
+ int index = mips32_dsp_find_register_by_name(CMD_ARGV[0]);
+ if (index == MIPS32NUMDSPREGS) {
+ command_print(CMD, "ERROR: register '%s' not found", CMD_ARGV[0]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
+
+ int retval = mips32_pracc_write_dsp_reg(ejtag_info, value, index);
+ if (retval != ERROR_OK)
+ command_print(CMD, "Error: could not write to dsp register %s", CMD_ARGV[0]);
+
+ return retval;
+}
+
+/**
+ * mips32_handle_dsp_command - Handles mips dsp related command
+ * @param[in] cmd: Command invocation context
+ *
+ * @brief Reads or sets the content of each dsp register.
+ *
+ * @return ERROR_OK on success; error code on failure.
+*/
+COMMAND_HANDLER(mips32_handle_dsp_command)
+{
+ int retval, tmp;
+ struct target *target = get_current_target(CMD_CTX);
+ struct mips32_common *mips32 = target_to_mips32(target);
+ struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
+
+ retval = mips32_verify_pointer(CMD, mips32);
if (retval != ERROR_OK)
return retval;
if (target->state != TARGET_HALTED) {
- command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
+ command_print(CMD, "target must be stopped for \"%s\" command", CMD_NAME);
return ERROR_OK;
}
- /* two or more argument, access a single register/select (write if third argument is given) */
- if (CMD_ARGC < 2)
+ /* Check for too many command args */
+ if (CMD_ARGC >= 3)
return ERROR_COMMAND_SYNTAX_ERROR;
- else {
- uint32_t cp0_reg, cp0_sel;
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], cp0_reg);
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], cp0_sel);
- if (CMD_ARGC == 2) {
- uint32_t value;
+ /* Check if DSP access supported or not */
+ if (!mips32->dsp_imp) {
+ /* Issue Error Message */
+ command_print(CMD, "DSP not implemented by this processor");
+ return ERROR_OK;
+ }
- retval = mips32_cp0_read(ejtag_info, &value, cp0_reg, cp0_sel);
- if (retval != ERROR_OK) {
- command_print(CMD_CTX,
- "couldn't access reg %" PRIi32,
- cp0_reg);
- return ERROR_OK;
+ switch (CMD_ARGC) {
+ case 0:
+ retval = mips32_dsp_get_all_regs(CMD, ejtag_info);
+ break;
+ case 1:
+ retval = mips32_dsp_get_register(CMD, ejtag_info);
+ break;
+ case 2:
+ tmp = *CMD_ARGV[0];
+ if (isdigit(tmp)) {
+ command_print(CMD, "Error: invalid dsp command format");
+ retval = ERROR_COMMAND_ARGUMENT_INVALID;
+ } else {
+ retval = mips32_dsp_set_register(CMD, ejtag_info);
}
- command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32,
- cp0_reg, cp0_sel, value);
+ break;
+ default:
+ command_print(CMD, "Error: invalid argument format, required 0-2, given %d", CMD_ARGC);
+ retval = ERROR_COMMAND_ARGUMENT_INVALID;
+ break;
+ }
+ return retval;
+}
- } else if (CMD_ARGC == 3) {
- uint32_t value;
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value);
- retval = mips32_cp0_write(ejtag_info, value, cp0_reg, cp0_sel);
- if (retval != ERROR_OK) {
- command_print(CMD_CTX,
- "couldn't access cp0 reg %" PRIi32 ", select %" PRIi32,
- cp0_reg, cp0_sel);
- return ERROR_OK;
- }
- command_print(CMD_CTX, "cp0 reg %" PRIi32 ", select %" PRIi32 ": %8.8" PRIx32,
- cp0_reg, cp0_sel, value);
- }
+/**
+ * mips32_handle_ejtag_reg_command - Handler commands related to EJTAG
+ * @param[in] cmd: Command invocation context
+ *
+ * @brief Prints all EJTAG Registers including DCR features.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
+COMMAND_HANDLER(mips32_handle_ejtag_reg_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct mips32_common *mips32 = target_to_mips32(target);
+ struct mips_ejtag *ejtag_info = &mips32->ejtag_info;
+
+ uint32_t ejtag_ctrl;
+ uint32_t dcr;
+ int retval;
+
+ retval = mips_ejtag_get_idcode(ejtag_info);
+ if (retval != ERROR_OK)
+ command_print(CMD, "Error: Encounter an Error while getting idcode");
+ else
+ command_print(CMD, " idcode: 0x%8.8" PRIx32, ejtag_info->idcode);
+
+ retval = mips_ejtag_get_impcode(ejtag_info);
+ if (retval != ERROR_OK)
+ command_print(CMD, "Error: Encounter an Error while getting impcode");
+ else
+ command_print(CMD, " impcode: 0x%8.8" PRIx32, ejtag_info->impcode);
+
+ mips_ejtag_set_instr(ejtag_info, EJTAG_INST_CONTROL);
+ ejtag_ctrl = ejtag_info->ejtag_ctrl;
+ retval = mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
+ if (retval != ERROR_OK)
+ command_print(CMD, "Error: Encounter an Error while executing drscan reading EJTAG Control register");
+ else
+ command_print(CMD, "ejtag control: 0x%8.8" PRIx32, ejtag_ctrl);
+
+ ejtag_main_print_imp(ejtag_info);
+
+ /* Display current DCR */
+ retval = target_read_u32(target, EJTAG_DCR, &dcr);
+ if (retval != ERROR_OK)
+ command_print(CMD, "Error: Encounter an Error while reading Debug Control Register");
+ else
+ command_print(CMD, " DCR: 0x%8.8" PRIx32, dcr);
+
+ for (unsigned int i = 0; i < EJTAG_DCR_ENTRIES; i++) {
+ if (dcr & BIT(dcr_features[i].bit))
+ command_print(CMD, "%s supported", dcr_features[i].name);
}
return ERROR_OK;
}
+/**
+ * mips32_handle_scan_delay_command - Handler command for changing scan delay
+ * @param[in] cmd: Command invocation context
+ *
+ * @brief Changes current scan mode between legacy and fast queued mode.
+ *
+ * @return ERROR_OK on success; error code on failure.
+ */
COMMAND_HANDLER(mips32_handle_scan_delay_command)
{
struct target *target = get_current_target(CMD_CTX);
else if (CMD_ARGC > 1)
return ERROR_COMMAND_SYNTAX_ERROR;
- command_print(CMD_CTX, "scan delay: %d nsec", ejtag_info->scan_delay);
+ command_print(CMD, "scan delay: %d nsec", ejtag_info->scan_delay);
if (ejtag_info->scan_delay >= MIPS32_SCAN_DELAY_LEGACY_MODE) {
ejtag_info->mode = 0;
- command_print(CMD_CTX, "running in legacy mode");
+ command_print(CMD, "running in legacy mode");
} else {
ejtag_info->mode = 1;
- command_print(CMD_CTX, "running in fast queued mode");
+ command_print(CMD, "running in fast queued mode");
}
return ERROR_OK;
.name = "cp0",
.handler = mips32_handle_cp0_command,
.mode = COMMAND_EXEC,
- .usage = "regnum select [value]",
+ .usage = "[[reg_name|regnum select] [value]]",
.help = "display/modify cp0 register",
},
- {
+ {
+ .name = "cpuinfo",
+ .handler = mips32_handle_cpuinfo_command,
+ .mode = COMMAND_EXEC,
+ .help = "display CPU information",
+ .usage = "",
+ },
+ {
+ .name = "dsp",
+ .handler = mips32_handle_dsp_command,
+ .mode = COMMAND_EXEC,
+ .help = "display or set DSP register; "
+ "with no arguments, displays all registers and their values",
+ .usage = "[[register_name] [value]]",
+ },
+ {
.name = "scan_delay",
.handler = mips32_handle_scan_delay_command,
.mode = COMMAND_ANY,
.help = "display/set scan delay in nano seconds",
.usage = "[value]",
},
+ {
+ .name = "ejtag_reg",
+ .handler = mips32_handle_ejtag_reg_command,
+ .mode = COMMAND_ANY,
+ .help = "read ejtag registers",
+ .usage = "",
+ },
COMMAND_REGISTRATION_DONE
};