+// SPDX-License-Identifier: GPL-2.0-or-later
+
/***************************************************************************
* Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
/* STM Serial Memory Interface (SMI) controller is a SPI bus controller
#include <jtag/jtag.h>
#include <helper/time_support.h>
-#define SMI_READ_REG(a) (_SMI_READ_REG(a))
-#define _SMI_READ_REG(a) \
-{ \
- int __a; \
- uint32_t __v; \
+#define SMI_READ_REG(a) \
+({ \
+ int _ret; \
+ uint32_t _value; \
\
- __a = target_read_u32(target, io_base + (a), &__v); \
- if (__a != ERROR_OK) \
- return __a; \
- __v; \
-}
+ _ret = target_read_u32(target, io_base + (a), &_value); \
+ if (_ret != ERROR_OK) \
+ return _ret; \
+ _value; \
+})
#define SMI_WRITE_REG(a, v) \
{ \
- int __r; \
+ int _retval; \
\
- __r = target_write_u32(target, io_base + (a), (v)); \
- if (__r != ERROR_OK) \
- return __r; \
+ _retval = target_write_u32(target, io_base + (a), (v)); \
+ if (_retval != ERROR_OK) \
+ return _retval; \
}
#define SMI_POLL_TFF(timeout) \
{ \
- int __r; \
+ int _retval; \
\
- __r = poll_tff(target, io_base, timeout); \
- if (__r != ERROR_OK) \
- return __r; \
+ _retval = poll_tff(target, io_base, timeout); \
+ if (_retval != ERROR_OK) \
+ return _retval; \
}
#define SMI_SET_SW_MODE() SMI_WRITE_REG(SMI_CR1, \
#define SMI_MAX_TIMEOUT (3000)
struct stmsmi_flash_bank {
- int probed;
+ bool probed;
uint32_t io_base;
uint32_t bank_num;
const struct flash_device *dev;
return ERROR_COMMAND_SYNTAX_ERROR;
stmsmi_info = malloc(sizeof(struct stmsmi_flash_bank));
- if (stmsmi_info == NULL) {
+ if (!stmsmi_info) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
bank->driver_priv = stmsmi_info;
- stmsmi_info->probed = 0;
+ stmsmi_info->probed = false;
return ERROR_OK;
}
return ERROR_OK;
}
-static int stmsmi_erase(struct flash_bank *bank, int first, int last)
+static int stmsmi_erase(struct flash_bank *bank, unsigned int first,
+ unsigned int last)
{
struct target *target = bank->target;
struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
uint32_t io_base = stmsmi_info->io_base;
int retval = ERROR_OK;
- int sector;
- LOG_DEBUG("%s: from sector %d to sector %d", __func__, first, last);
+ LOG_DEBUG("%s: from sector %u to sector %u", __func__, first, last);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
+ if ((last < first) || (last >= bank->num_sectors)) {
LOG_ERROR("Flash sector invalid");
return ERROR_FLASH_SECTOR_INVALID;
}
return ERROR_FLASH_BANK_NOT_PROBED;
}
- for (sector = first; sector <= last; sector++) {
+ for (unsigned int sector = first; sector <= last; sector++) {
if (bank->sectors[sector].is_protected) {
- LOG_ERROR("Flash sector %d protected", sector);
+ LOG_ERROR("Flash sector %u protected", sector);
return ERROR_FAIL;
}
}
if (stmsmi_info->dev->erase_cmd == 0x00)
return ERROR_FLASH_OPER_UNSUPPORTED;
- for (sector = first; sector <= last; sector++) {
+ for (unsigned int sector = first; sector <= last; sector++) {
retval = smi_erase_sector(bank, sector);
if (retval != ERROR_OK)
break;
}
static int stmsmi_protect(struct flash_bank *bank, int set,
- int first, int last)
+ unsigned int first, unsigned int last)
{
- int sector;
-
- for (sector = first; sector <= last; sector++)
+ for (unsigned int sector = first; sector <= last; sector++)
bank->sectors[sector].is_protected = set;
return ERROR_OK;
}
struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
uint32_t io_base = stmsmi_info->io_base;
uint32_t cur_count, page_size, page_offset;
- int sector;
int retval = ERROR_OK;
LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32,
}
/* Check sector protection */
- for (sector = 0; sector < bank->num_sectors; sector++) {
+ for (unsigned int sector = 0; sector < bank->num_sectors; sector++) {
/* Start offset in or before this sector? */
/* End offset in or behind this sector? */
if ((offset <
(bank->sectors[sector].offset + bank->sectors[sector].size))
&& ((offset + count - 1) >= bank->sectors[sector].offset)
&& bank->sectors[sector].is_protected) {
- LOG_ERROR("Flash sector %d protected", sector);
+ LOG_ERROR("Flash sector %u protected", sector);
return ERROR_FAIL;
}
}
if (stmsmi_info->probed)
free(bank->sectors);
- stmsmi_info->probed = 0;
+ stmsmi_info->probed = false;
for (target_device = target_devices ; target_device->name ; ++target_device)
if (target_device->tap_idcode == target->tap->idcode)
bank->num_sectors =
stmsmi_info->dev->size_in_bytes / sectorsize;
sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
- if (sectors == NULL) {
+ if (!sectors) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
- for (int sector = 0; sector < bank->num_sectors; sector++) {
+ for (unsigned int sector = 0; sector < bank->num_sectors; sector++) {
sectors[sector].offset = sector * sectorsize;
sectors[sector].size = sectorsize;
sectors[sector].is_erased = -1;
}
bank->sectors = sectors;
- stmsmi_info->probed = 1;
+ stmsmi_info->probed = true;
return ERROR_OK;
}
return ERROR_OK;
}
-static int get_stmsmi_info(struct flash_bank *bank, char *buf, int buf_size)
+static int get_stmsmi_info(struct flash_bank *bank, struct command_invocation *cmd)
{
struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
if (!(stmsmi_info->probed)) {
- snprintf(buf, buf_size,
- "\nSMI flash bank not probed yet\n");
+ command_print_sameline(cmd, "\nSMI flash bank not probed yet\n");
return ERROR_OK;
}
- snprintf(buf, buf_size, "\nSMI flash information:\n"
+ command_print_sameline(cmd, "\nSMI flash information:\n"
" Device \'%s\' (ID 0x%08" PRIx32 ")\n",
stmsmi_info->dev->name, stmsmi_info->dev->device_id);
return ERROR_OK;
}
-struct flash_driver stmsmi_flash = {
+const struct flash_driver stmsmi_flash = {
.name = "stmsmi",
.flash_bank_command = stmsmi_flash_bank_command,
.erase = stmsmi_erase,
Code Review / openocd.git / blobdiff