+// SPDX-License-Identifier: GPL-2.0-or-later
+
/***************************************************************************
* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
* Copyright (C) 2011 by Andreas Fritiofson *
* andreas.fritiofson@gmail.com *
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
+#include <string.h>
+
#include "imp.h"
#include <helper/binarybuffer.h>
#include <target/algorithm.h>
-#include <target/armv7m.h>
+#include <target/cortex_m.h>
/* stm32x register locations */
/* FLASH_CR register bits */
-#define FLASH_PG (1 << 0)
-#define FLASH_PER (1 << 1)
-#define FLASH_MER (1 << 2)
-#define FLASH_OPTPG (1 << 4)
-#define FLASH_OPTER (1 << 5)
-#define FLASH_STRT (1 << 6)
-#define FLASH_LOCK (1 << 7)
-#define FLASH_OPTWRE (1 << 9)
+#define FLASH_PG (1 << 0)
+#define FLASH_PER (1 << 1)
+#define FLASH_MER (1 << 2)
+#define FLASH_OPTPG (1 << 4)
+#define FLASH_OPTER (1 << 5)
+#define FLASH_STRT (1 << 6)
+#define FLASH_LOCK (1 << 7)
+#define FLASH_OPTWRE (1 << 9)
+#define FLASH_OBL_LAUNCH (1 << 13) /* except stm32f1x series */
/* FLASH_SR register bits */
#define KEY1 0x45670123
#define KEY2 0xCDEF89AB
+/* timeout values */
+
+#define FLASH_WRITE_TIMEOUT 10
+#define FLASH_ERASE_TIMEOUT 100
+
struct stm32x_options {
- uint16_t RDP;
- uint16_t user_options;
- uint16_t protection[4];
+ uint8_t rdp;
+ uint8_t user;
+ uint16_t data;
+ uint32_t protection;
};
struct stm32x_flash_bank {
struct stm32x_options option_bytes;
- struct working_area *write_algorithm;
int ppage_size;
- int probed;
+ bool probed;
bool has_dual_banks;
/* used to access dual flash bank stm32xl */
+ bool can_load_options;
uint32_t register_base;
+ uint8_t default_rdp;
+ int user_data_offset;
+ int option_offset;
+ uint32_t user_bank_size;
};
static int stm32x_mass_erase(struct flash_bank *bank);
-static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id);
+static int stm32x_write_block(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t address, uint32_t hwords_count);
/* flash bank stm32x <base> <size> 0 0 <target#>
*/
stm32x_info = malloc(sizeof(struct stm32x_flash_bank));
bank->driver_priv = stm32x_info;
- stm32x_info->write_algorithm = NULL;
- stm32x_info->probed = 0;
+ stm32x_info->probed = false;
stm32x_info->has_dual_banks = false;
+ stm32x_info->can_load_options = false;
stm32x_info->register_base = FLASH_REG_BASE_B0;
+ stm32x_info->user_bank_size = bank->size;
+
+ /* The flash write must be aligned to a halfword boundary */
+ bank->write_start_alignment = bank->write_end_alignment = 2;
return ERROR_OK;
}
break;
if (timeout-- <= 0) {
LOG_ERROR("timed out waiting for flash");
- return ERROR_FAIL;
+ return ERROR_FLASH_BUSY;
}
alive_sleep(1);
}
if (status & FLASH_WRPRTERR) {
LOG_ERROR("stm32x device protected");
- retval = ERROR_FAIL;
+ retval = ERROR_FLASH_PROTECTED;
}
if (status & FLASH_PGERR) {
- LOG_ERROR("stm32x device programming failed");
- retval = ERROR_FAIL;
+ LOG_ERROR("stm32x device programming failed / flash not erased");
+ retval = ERROR_FLASH_OPERATION_FAILED;
}
/* Clear but report errors */
return retval;
}
-int stm32x_check_operation_supported(struct flash_bank *bank)
+static int stm32x_check_operation_supported(struct flash_bank *bank)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
/* if we have a dual flash bank device then
* we need to perform option byte stuff on bank0 only */
if (stm32x_info->register_base != FLASH_REG_BASE_B0) {
- LOG_ERROR("Option Byte Operation's must use bank0");
+ LOG_ERROR("Option byte operations must use bank 0");
return ERROR_FLASH_OPERATION_FAILED;
}
static int stm32x_read_options(struct flash_bank *bank)
{
- uint32_t optiondata;
- struct stm32x_flash_bank *stm32x_info = NULL;
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
+ uint32_t option_bytes;
+ int retval;
- stm32x_info = bank->driver_priv;
-
- /* read current option bytes */
- int retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optiondata);
+ /* read user and read protection option bytes, user data option bytes */
+ retval = target_read_u32(target, STM32_FLASH_OBR_B0, &option_bytes);
if (retval != ERROR_OK)
return retval;
- stm32x_info->option_bytes.user_options = (uint16_t)0xFFF8 | ((optiondata >> 2) & 0x07);
- stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
+ stm32x_info->option_bytes.rdp = (option_bytes & (1 << OPT_READOUT)) ? 0 : stm32x_info->default_rdp;
+ stm32x_info->option_bytes.user = (option_bytes >> stm32x_info->option_offset >> 2) & 0xff;
+ stm32x_info->option_bytes.data = (option_bytes >> stm32x_info->user_data_offset) & 0xffff;
- if (optiondata & (1 << OPT_READOUT))
- LOG_INFO("Device Security Bit Set");
-
- /* each bit refers to a 4bank protection */
- retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &optiondata);
+ /* read write protection option bytes */
+ retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &stm32x_info->option_bytes.protection);
if (retval != ERROR_OK)
return retval;
- stm32x_info->option_bytes.protection[0] = (uint16_t)optiondata;
- stm32x_info->option_bytes.protection[1] = (uint16_t)(optiondata >> 8);
- stm32x_info->option_bytes.protection[2] = (uint16_t)(optiondata >> 16);
- stm32x_info->option_bytes.protection[3] = (uint16_t)(optiondata >> 24);
-
return ERROR_OK;
}
static int stm32x_erase_options(struct flash_bank *bank)
{
- struct stm32x_flash_bank *stm32x_info = NULL;
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
- stm32x_info = bank->driver_priv;
-
/* read current options */
stm32x_read_options(bank);
int retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY1);
if (retval != ERROR_OK)
return retval;
-
retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
/* unlock option flash registers */
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
/* erase option bytes */
retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_OPTWRE);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTER | FLASH_STRT | FLASH_OPTWRE);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
- retval = stm32x_wait_status_busy(bank, 10);
+ retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
- /* clear readout protection and complementary option bytes
+ /* clear read protection option byte
* this will also force a device unlock if set */
- stm32x_info->option_bytes.RDP = 0x5AA5;
+ stm32x_info->option_bytes.rdp = stm32x_info->default_rdp;
return ERROR_OK;
+
+flash_lock:
+ target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
+ return retval;
}
static int stm32x_write_options(struct flash_bank *bank)
return retval;
retval = target_write_u32(target, STM32_FLASH_KEYR_B0, KEY2);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
/* unlock option flash registers */
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY1);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
retval = target_write_u32(target, STM32_FLASH_OPTKEYR_B0, KEY2);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
/* program option bytes */
retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_OPTPG | FLASH_OPTWRE);
if (retval != ERROR_OK)
- return retval;
-
- /* write user option byte */
- retval = target_write_u16(target, STM32_OB_USER, stm32x_info->option_bytes.user_options);
- if (retval != ERROR_OK)
- return retval;
-
- retval = stm32x_wait_status_busy(bank, 10);
- if (retval != ERROR_OK)
- return retval;
-
- /* write protection byte 1 */
- retval = target_write_u16(target, STM32_OB_WRP0, stm32x_info->option_bytes.protection[0]);
- if (retval != ERROR_OK)
- return retval;
-
- retval = stm32x_wait_status_busy(bank, 10);
- if (retval != ERROR_OK)
- return retval;
-
- /* write protection byte 2 */
- retval = target_write_u16(target, STM32_OB_WRP1, stm32x_info->option_bytes.protection[1]);
- if (retval != ERROR_OK)
- return retval;
-
- retval = stm32x_wait_status_busy(bank, 10);
- if (retval != ERROR_OK)
- return retval;
-
- /* write protection byte 3 */
- retval = target_write_u16(target, STM32_OB_WRP2, stm32x_info->option_bytes.protection[2]);
- if (retval != ERROR_OK)
- return retval;
-
- retval = stm32x_wait_status_busy(bank, 10);
- if (retval != ERROR_OK)
- return retval;
-
- /* write protection byte 4 */
- retval = target_write_u16(target, STM32_OB_WRP3, stm32x_info->option_bytes.protection[3]);
- if (retval != ERROR_OK)
- return retval;
-
- retval = stm32x_wait_status_busy(bank, 10);
- if (retval != ERROR_OK)
- return retval;
-
- /* write readout protection bit */
- retval = target_write_u16(target, STM32_OB_RDP, stm32x_info->option_bytes.RDP);
- if (retval != ERROR_OK)
- return retval;
-
- retval = stm32x_wait_status_busy(bank, 10);
- if (retval != ERROR_OK)
- return retval;
-
- retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
- if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
+
+ uint8_t opt_bytes[16];
+
+ target_buffer_set_u16(target, opt_bytes, stm32x_info->option_bytes.rdp);
+ target_buffer_set_u16(target, opt_bytes + 2, stm32x_info->option_bytes.user);
+ target_buffer_set_u16(target, opt_bytes + 4, stm32x_info->option_bytes.data & 0xff);
+ target_buffer_set_u16(target, opt_bytes + 6, (stm32x_info->option_bytes.data >> 8) & 0xff);
+ target_buffer_set_u16(target, opt_bytes + 8, stm32x_info->option_bytes.protection & 0xff);
+ target_buffer_set_u16(target, opt_bytes + 10, (stm32x_info->option_bytes.protection >> 8) & 0xff);
+ target_buffer_set_u16(target, opt_bytes + 12, (stm32x_info->option_bytes.protection >> 16) & 0xff);
+ target_buffer_set_u16(target, opt_bytes + 14, (stm32x_info->option_bytes.protection >> 24) & 0xff);
+
+ /* Block write is preferred in favour of operation with ancient ST-Link
+ * firmwares without 16-bit memory access. See
+ * 480: flash: stm32f1x: write option bytes using the loader
+ * https://review.openocd.org/c/openocd/+/480
+ */
+ retval = stm32x_write_block(bank, opt_bytes, STM32_OB_RDP, sizeof(opt_bytes) / 2);
- return ERROR_OK;
+flash_lock:
+ {
+ int retval2 = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
+ if (retval == ERROR_OK)
+ retval = retval2;
+ }
+ return retval;
}
static int stm32x_protect_check(struct flash_bank *bank)
{
struct target *target = bank->target;
- struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
-
uint32_t protection;
- int i, s;
- int num_bits;
- int set;
-
- if (target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
int retval = stm32x_check_operation_supported(bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
- /* medium density - each bit refers to a 4bank protection
- * high density - each bit refers to a 2bank protection */
+ /* medium density - each bit refers to a 4 sector protection block
+ * high density - each bit refers to a 2 sector protection block
+ * bit 31 refers to all remaining sectors in a bank */
retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
if (retval != ERROR_OK)
return retval;
- /* medium density - each protection bit is for 4 * 1K pages
- * high density - each protection bit is for 2 * 2K pages */
- num_bits = (bank->num_sectors / stm32x_info->ppage_size);
-
- if (stm32x_info->ppage_size == 2) {
- /* high density flash/connectivity line protection */
-
- set = 1;
-
- if (protection & (1 << 31))
- set = 0;
-
- /* bit 31 controls sector 62 - 255 protection for high density
- * bit 31 controls sector 62 - 127 protection for connectivity line */
- for (s = 62; s < bank->num_sectors; s++)
- bank->sectors[s].is_protected = set;
-
- if (bank->num_sectors > 61)
- num_bits = 31;
-
- for (i = 0; i < num_bits; i++) {
- set = 1;
-
- if (protection & (1 << i))
- set = 0;
-
- for (s = 0; s < stm32x_info->ppage_size; s++)
- bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
- }
- } else {
- /* low/medium density flash protection */
- for (i = 0; i < num_bits; i++) {
- set = 1;
-
- if (protection & (1 << i))
- set = 0;
-
- for (s = 0; s < stm32x_info->ppage_size; s++)
- bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
- }
- }
+ for (unsigned int i = 0; i < bank->num_prot_blocks; i++)
+ bank->prot_blocks[i].is_protected = (protection & (1 << i)) ? 0 : 1;
return ERROR_OK;
}
-static int stm32x_erase(struct flash_bank *bank, int first, int last)
+static int stm32x_erase(struct flash_bank *bank, unsigned int first,
+ unsigned int last)
{
struct target *target = bank->target;
- int i;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
- for (i = first; i <= last; i++) {
+ for (unsigned int i = first; i <= last; i++) {
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_AR),
bank->base + bank->sectors[i].offset);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
retval = target_write_u32(target,
stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PER | FLASH_STRT);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
- retval = stm32x_wait_status_busy(bank, 100);
+ retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
if (retval != ERROR_OK)
- return retval;
-
- bank->sectors[i].is_erased = 1;
+ goto flash_lock;
}
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
- if (retval != ERROR_OK)
- return retval;
-
- return ERROR_OK;
+flash_lock:
+ {
+ int retval2 = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+ if (retval == ERROR_OK)
+ retval = retval2;
+ }
+ return retval;
}
-static int stm32x_protect(struct flash_bank *bank, int set, int first, int last)
+static int stm32x_protect(struct flash_bank *bank, int set, unsigned int first,
+ unsigned int last)
{
- struct stm32x_flash_bank *stm32x_info = NULL;
struct target *target = bank->target;
- uint16_t prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
- int i, reg, bit;
- int status;
- uint32_t protection;
-
- stm32x_info = bank->driver_priv;
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
}
int retval = stm32x_check_operation_supported(bank);
- if (ERROR_OK != retval)
- return retval;
-
- if ((first % stm32x_info->ppage_size) != 0) {
- LOG_WARNING("aligned start protect sector to a %d sector boundary",
- stm32x_info->ppage_size);
- first = first - (first % stm32x_info->ppage_size);
- }
- if (((last + 1) % stm32x_info->ppage_size) != 0) {
- LOG_WARNING("aligned end protect sector to a %d sector boundary",
- stm32x_info->ppage_size);
- last++;
- last = last - (last % stm32x_info->ppage_size);
- last--;
- }
-
- /* medium density - each bit refers to a 4bank protection
- * high density - each bit refers to a 2bank protection */
- retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
if (retval != ERROR_OK)
return retval;
- prot_reg[0] = (uint16_t)protection;
- prot_reg[1] = (uint16_t)(protection >> 8);
- prot_reg[2] = (uint16_t)(protection >> 16);
- prot_reg[3] = (uint16_t)(protection >> 24);
-
- if (stm32x_info->ppage_size == 2) {
- /* high density flash */
-
- /* bit 7 controls sector 62 - 255 protection */
- if (last > 61) {
- if (set)
- prot_reg[3] &= ~(1 << 7);
- else
- prot_reg[3] |= (1 << 7);
- }
-
- if (first > 61)
- first = 62;
- if (last > 61)
- last = 61;
-
- for (i = first; i <= last; i++) {
- reg = (i / stm32x_info->ppage_size) / 8;
- bit = (i / stm32x_info->ppage_size) - (reg * 8);
-
- if (set)
- prot_reg[reg] &= ~(1 << bit);
- else
- prot_reg[reg] |= (1 << bit);
- }
- } else {
- /* medium density flash */
- for (i = first; i <= last; i++) {
- reg = (i / stm32x_info->ppage_size) / 8;
- bit = (i / stm32x_info->ppage_size) - (reg * 8);
-
- if (set)
- prot_reg[reg] &= ~(1 << bit);
- else
- prot_reg[reg] |= (1 << bit);
- }
+ retval = stm32x_erase_options(bank);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("stm32x failed to erase options");
+ return retval;
}
- status = stm32x_erase_options(bank);
- if (status != ERROR_OK)
- return status;
-
- stm32x_info->option_bytes.protection[0] = prot_reg[0];
- stm32x_info->option_bytes.protection[1] = prot_reg[1];
- stm32x_info->option_bytes.protection[2] = prot_reg[2];
- stm32x_info->option_bytes.protection[3] = prot_reg[3];
+ for (unsigned int i = first; i <= last; i++) {
+ if (set)
+ stm32x_info->option_bytes.protection &= ~(1 << i);
+ else
+ stm32x_info->option_bytes.protection |= (1 << i);
+ }
return stm32x_write_options(bank);
}
-static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
- uint32_t offset, uint32_t count)
+static int stm32x_write_block_async(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t address, uint32_t hwords_count)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
struct target *target = bank->target;
- uint32_t buffer_size = 16384;
+ uint32_t buffer_size;
+ struct working_area *write_algorithm;
struct working_area *source;
- uint32_t address = bank->base + offset;
- struct reg_param reg_params[5];
struct armv7m_algorithm armv7m_info;
- int retval = ERROR_OK;
-
- /* see contrib/loaders/flash/stm32f1x.S for src */
+ int retval;
static const uint8_t stm32x_flash_write_code[] = {
- /* #define STM32_FLASH_CR_OFFSET 0x10 */
- /* #define STM32_FLASH_SR_OFFSET 0x0C */
- /* wait_fifo: */
- 0x16, 0x68, /* ldr r6, [r2, #0] */
- 0x00, 0x2e, /* cmp r6, #0 */
- 0x1a, 0xd0, /* beq exit */
- 0x55, 0x68, /* ldr r5, [r2, #4] */
- 0xb5, 0x42, /* cmp r5, r6 */
- 0xf9, 0xd0, /* beq wait_fifo */
- 0x01, 0x26, /* movs r6, #1 */
- 0x06, 0x61, /* str r6, [r0, #STM32_FLASH_CR_OFFSET] */
- 0x2e, 0x88, /* ldrh r6, [r5, #0] */
- 0x26, 0x80, /* strh r6, [r4, #0] */
- 0x02, 0x35, /* adds r5, #2 */
- 0x02, 0x34, /* adds r4, #2 */
- /* busy: */
- 0xc6, 0x68, /* ldr r6, [r0, #STM32_FLASH_SR_OFFSET] */
- 0x01, 0x27, /* movs r7, #1 */
- 0x3e, 0x42, /* tst r6, r7 */
- 0xfb, 0xd1, /* bne busy */
- 0x14, 0x27, /* movs r7, #0x14 */
- 0x3e, 0x42, /* tst r6, r7 */
- 0x08, 0xd1, /* bne error */
- 0x9d, 0x42, /* cmp r5, r3 */
- 0x01, 0xd3, /* bcc no_wrap */
- 0x15, 0x46, /* mov r5, r2 */
- 0x08, 0x35, /* adds r5, #8 */
- /* no_wrap: */
- 0x55, 0x60, /* str r5, [r2, #4] */
- 0x01, 0x39, /* subs r1, r1, #1 */
- 0x00, 0x29, /* cmp r1, #0 */
- 0x02, 0xd0, /* beq exit */
- 0xe3, 0xe7, /* b wait_fifo */
- /* error: */
- 0x00, 0x20, /* movs r0, #0 */
- 0x50, 0x60, /* str r0, [r2, #4] */
- /* exit: */
- 0x30, 0x46, /* mov r0, r6 */
- 0x00, 0xbe, /* bkpt #0 */
+#include "../../../contrib/loaders/flash/stm32/stm32f1x.inc"
};
/* flash write code */
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
- &stm32x_info->write_algorithm) != ERROR_OK) {
+ &write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
- retval = target_write_buffer(target, stm32x_info->write_algorithm->address,
- sizeof(stm32x_flash_write_code), (uint8_t *)stm32x_flash_write_code);
- if (retval != ERROR_OK)
+ retval = target_write_buffer(target, write_algorithm->address,
+ sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
return retval;
+ }
/* memory buffer */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
- buffer_size /= 2;
- buffer_size &= ~3UL; /* Make sure it's 4 byte aligned */
- if (buffer_size <= 256) {
- /* if we already allocated the writing code, but failed to get a
- * buffer, free the algorithm */
- if (stm32x_info->write_algorithm)
- target_free_working_area(target, stm32x_info->write_algorithm);
-
- LOG_WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- };
+ buffer_size = target_get_working_area_avail(target);
+ buffer_size = MIN(hwords_count * 2 + 8, MAX(buffer_size, 256));
+ /* Normally we allocate all available working area.
+ * MIN shrinks buffer_size if the size of the written block is smaller.
+ * MAX prevents using async algo if the available working area is smaller
+ * than 256, the following allocation fails with
+ * ERROR_TARGET_RESOURCE_NOT_AVAILABLE and slow flashing takes place.
+ */
+
+ retval = target_alloc_working_area(target, buffer_size, &source);
+ /* Allocated size is always 32-bit word aligned */
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
+ LOG_WARNING("no large enough working area available, can't do block memory writes");
+ /* target_alloc_working_area() may return ERROR_FAIL if area backup fails:
+ * convert any error to ERROR_TARGET_RESOURCE_NOT_AVAILABLE
+ */
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ struct reg_param reg_params[5];
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* count (halfword-16bit) */
init_reg_param(®_params[4], "r4", 32, PARAM_IN_OUT); /* target address */
buf_set_u32(reg_params[0].value, 0, 32, stm32x_info->register_base);
- buf_set_u32(reg_params[1].value, 0, 32, count);
+ buf_set_u32(reg_params[1].value, 0, 32, hwords_count);
buf_set_u32(reg_params[2].value, 0, 32, source->address);
buf_set_u32(reg_params[3].value, 0, 32, source->address + source->size);
buf_set_u32(reg_params[4].value, 0, 32, address);
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
- armv7m_info.core_mode = ARMV7M_MODE_ANY;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
- retval = target_run_flash_async_algorithm(target, buffer, count, 2,
+ retval = target_run_flash_async_algorithm(target, buffer, hwords_count, 2,
0, NULL,
- 5, reg_params,
+ ARRAY_SIZE(reg_params), reg_params,
source->address, source->size,
- stm32x_info->write_algorithm->address, 0,
+ write_algorithm->address, 0,
&armv7m_info);
if (retval == ERROR_FLASH_OPERATION_FAILED) {
- LOG_ERROR("flash write failed at address 0x%"PRIx32,
- buf_get_u32(reg_params[4].value, 0, 32));
-
- if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR) {
- LOG_ERROR("flash memory not erased before writing");
- /* Clear but report errors */
- target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_PGERR);
- }
+ /* Actually we just need to check for programming errors
+ * stm32x_wait_status_busy also reports error and clears status bits.
+ *
+ * Target algo returns flash status in r0 only if properly finished.
+ * It is safer to re-read status register.
+ */
+ int retval2 = stm32x_wait_status_busy(bank, 5);
+ if (retval2 != ERROR_OK)
+ retval = retval2;
- if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR) {
- LOG_ERROR("flash memory write protected");
- /* Clear but report errors */
- target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_WRPRTERR);
- }
+ LOG_ERROR("flash write failed just before address 0x%"PRIx32,
+ buf_get_u32(reg_params[4].value, 0, 32));
}
- target_free_working_area(target, source);
- target_free_working_area(target, stm32x_info->write_algorithm);
+ for (unsigned int i = 0; i < ARRAY_SIZE(reg_params); i++)
+ destroy_reg_param(®_params[i]);
- destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
- destroy_reg_param(®_params[2]);
- destroy_reg_param(®_params[3]);
- destroy_reg_param(®_params[4]);
+ target_free_working_area(target, source);
+ target_free_working_area(target, write_algorithm);
return retval;
}
-static int stm32x_write(struct flash_bank *bank, uint8_t *buffer,
- uint32_t offset, uint32_t count)
+static int stm32x_write_block_riscv(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t address, uint32_t hwords_count)
{
struct target *target = bank->target;
- uint32_t words_remaining = (count / 2);
- uint32_t bytes_remaining = (count & 0x00000001);
- uint32_t address = bank->base + offset;
- uint32_t bytes_written = 0;
- int retval;
+ uint32_t buffer_size;
+ struct working_area *write_algorithm;
+ struct working_area *source;
+ static const uint8_t gd32vf103_flash_write_code[] = {
+#include "../../../contrib/loaders/flash/gd32vf103/gd32vf103.inc"
+ };
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
+ /* flash write code */
+ if (target_alloc_working_area(target, sizeof(gd32vf103_flash_write_code),
+ &write_algorithm) != ERROR_OK) {
+ LOG_WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- if (offset & 0x1) {
- LOG_WARNING("offset 0x%" PRIx32 " breaks required 2-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ int retval = target_write_buffer(target, write_algorithm->address,
+ sizeof(gd32vf103_flash_write_code), gd32vf103_flash_write_code);
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
+ return retval;
}
- /* unlock flash registers */
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
- if (retval != ERROR_OK)
- return retval;
+ /* memory buffer */
+ buffer_size = target_get_working_area_avail(target);
+ buffer_size = MIN(hwords_count * 2, MAX(buffer_size, 256));
- /* multiple half words (2-byte) to be programmed? */
- if (words_remaining > 0) {
- /* try using a block write */
- retval = stm32x_write_block(bank, buffer, offset, words_remaining);
- if (retval != ERROR_OK) {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
- LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
- }
- } else {
- buffer += words_remaining * 2;
- address += words_remaining * 2;
- words_remaining = 0;
- }
+ retval = target_alloc_working_area(target, buffer_size, &source);
+ /* Allocated size is always word aligned */
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
+ LOG_WARNING("no large enough working area available, can't do block memory writes");
+ /* target_alloc_working_area() may return ERROR_FAIL if area backup fails:
+ * convert any error to ERROR_TARGET_RESOURCE_NOT_AVAILABLE
+ */
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- if ((retval != ERROR_OK) && (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE))
- return retval;
+ struct reg_param reg_params[4];
- while (words_remaining > 0) {
- uint16_t value;
- memcpy(&value, buffer + bytes_written, sizeof(uint16_t));
+ init_reg_param(®_params[0], "a0", 32, PARAM_OUT); /* poiner to FLASH_SR */
+ init_reg_param(®_params[1], "a1", 32, PARAM_OUT); /* count (halfword-16bit) */
+ init_reg_param(®_params[2], "a2", 32, PARAM_OUT); /* buffer start */
+ init_reg_param(®_params[3], "a3", 32, PARAM_IN_OUT); /* target address */
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_u16(target, address, value);
- if (retval != ERROR_OK)
- return retval;
+ while (hwords_count > 0) {
+ uint32_t thisrun_hwords = source->size / 2;
- retval = stm32x_wait_status_busy(bank, 5);
+ /* Limit to the amount of data we actually want to write */
+ if (thisrun_hwords > hwords_count)
+ thisrun_hwords = hwords_count;
+
+ /* Write data to buffer */
+ retval = target_write_buffer(target, source->address,
+ thisrun_hwords * 2, buffer);
if (retval != ERROR_OK)
- return retval;
+ break;
- bytes_written += 2;
- words_remaining--;
- address += 2;
- }
+ buf_set_u32(reg_params[0].value, 0, 32, stm32x_get_flash_reg(bank, STM32_FLASH_SR));
+ buf_set_u32(reg_params[1].value, 0, 32, thisrun_hwords);
+ buf_set_u32(reg_params[2].value, 0, 32, source->address);
+ buf_set_u32(reg_params[3].value, 0, 32, address);
- if (bytes_remaining) {
- uint16_t value = 0xffff;
- memcpy(&value, buffer + bytes_written, bytes_remaining);
+ retval = target_run_algorithm(target,
+ 0, NULL,
+ ARRAY_SIZE(reg_params), reg_params,
+ write_algorithm->address,
+ write_algorithm->address + sizeof(gd32vf103_flash_write_code) - 4,
+ 10000, NULL);
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
- if (retval != ERROR_OK)
- return retval;
- retval = target_write_u16(target, address, value);
- if (retval != ERROR_OK)
- return retval;
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Failed to execute algorithm at 0x%" TARGET_PRIxADDR ": %d",
+ write_algorithm->address, retval);
+ break;
+ }
+ /* Actually we just need to check for programming errors
+ * stm32x_wait_status_busy also reports error and clears status bits
+ */
retval = stm32x_wait_status_busy(bank, 5);
- if (retval != ERROR_OK)
- return retval;
+ if (retval != ERROR_OK) {
+ LOG_ERROR("flash write failed at address 0x%"PRIx32,
+ buf_get_u32(reg_params[3].value, 0, 32));
+ break;
+ }
+
+ /* Update counters */
+ buffer += thisrun_hwords * 2;
+ address += thisrun_hwords * 2;
+ hwords_count -= thisrun_hwords;
}
- return target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+ for (unsigned int i = 0; i < ARRAY_SIZE(reg_params); i++)
+ destroy_reg_param(®_params[i]);
+
+ target_free_working_area(target, source);
+ target_free_working_area(target, write_algorithm);
+
+ return retval;
}
-static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
+/** Writes a block to flash either using target algorithm
+ * or use fallback, host controlled halfword-by-halfword access.
+ * Flash controller must be unlocked before this call.
+ */
+static int stm32x_write_block(struct flash_bank *bank,
+ const uint8_t *buffer, uint32_t address, uint32_t hwords_count)
{
- /* This check the device CPUID core register to detect
- * the M0 from the M3 devices. */
-
struct target *target = bank->target;
- uint32_t cpuid, device_id_register = 0;
- /* Get the CPUID from the ARM Core
- * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0432c/DDI0432C_cortex_m0_r0p0_trm.pdf 4.2.1 */
- int retval = target_read_u32(target, 0xE000ED00, &cpuid);
- if (retval != ERROR_OK)
- return retval;
+ /* The flash write must be aligned to a halfword boundary.
+ * The flash infrastructure ensures it, do just a security check
+ */
+ assert(address % 2 == 0);
- if (((cpuid >> 4) & 0xFFF) == 0xC20) {
- /* 0xC20 is M0 devices */
- device_id_register = 0x40015800;
- } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
- /* 0xC23 is M3 devices */
- device_id_register = 0xE0042000;
- } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
- /* 0xC24 is M4 devices */
- device_id_register = 0xE0042000;
+ int retval;
+ struct arm *arm = target_to_arm(target);
+ if (is_arm(arm)) {
+ /* try using a block write - on ARM architecture or... */
+ retval = stm32x_write_block_async(bank, buffer, address, hwords_count);
} else {
- LOG_ERROR("Cannot identify target as a stm32x");
- return ERROR_FAIL;
+ /* ... RISC-V architecture */
+ retval = stm32x_write_block_riscv(bank, buffer, address, hwords_count);
}
- /* read stm32 device id register */
- retval = target_read_u32(target, device_id_register, device_id);
- if (retval != ERROR_OK)
- return retval;
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single halfword accesses */
+ LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
+
+ while (hwords_count > 0) {
+ retval = target_write_memory(target, address, 2, 1, buffer);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = stm32x_wait_status_busy(bank, 5);
+ if (retval != ERROR_OK)
+ return retval;
+
+ hwords_count--;
+ buffer += 2;
+ address += 2;
+ }
+ }
return retval;
}
-static int stm32x_get_flash_size(struct flash_bank *bank, uint16_t *flash_size_in_kb)
+static int stm32x_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
- uint32_t cpuid, flash_size_reg;
-
- int retval = target_read_u32(target, 0xE000ED00, &cpuid);
- if (retval != ERROR_OK)
- return retval;
- if (((cpuid >> 4) & 0xFFF) == 0xC20) {
- /* 0xC20 is M0 devices */
- flash_size_reg = 0x1FFFF7CC;
- } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
- /* 0xC23 is M3 devices */
- flash_size_reg = 0x1FFFF7E0;
- } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
- /* 0xC24 is M4 devices */
- flash_size_reg = 0x1FFFF7CC;
- } else {
- LOG_ERROR("Cannot identify target as a stm32x");
- return ERROR_FAIL;
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
}
- retval = target_read_u16(target, flash_size_reg, flash_size_in_kb);
- if (retval != ERROR_OK)
- return retval;
+ /* The flash write must be aligned to a halfword boundary.
+ * The flash infrastructure ensures it, do just a security check
+ */
+ assert(offset % 2 == 0);
+ assert(count % 2 == 0);
- return retval;
+ int retval, retval2;
+
+ /* unlock flash registers */
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
+ if (retval != ERROR_OK)
+ goto reset_pg_and_lock;
+
+ /* enable flash programming */
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
+ if (retval != ERROR_OK)
+ goto reset_pg_and_lock;
+
+ /* write to flash */
+ retval = stm32x_write_block(bank, buffer, bank->base + offset, count / 2);
+
+reset_pg_and_lock:
+ retval2 = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+ if (retval == ERROR_OK)
+ retval = retval2;
+
+ return retval;
+}
+
+struct stm32x_property_addr {
+ uint32_t device_id;
+ uint32_t flash_size;
+};
+
+static int stm32x_get_property_addr(struct target *target, struct stm32x_property_addr *addr)
+{
+ if (!target_was_examined(target)) {
+ LOG_ERROR("Target not examined yet");
+ return ERROR_TARGET_NOT_EXAMINED;
+ }
+
+ switch (cortex_m_get_impl_part(target)) {
+ case CORTEX_M0_PARTNO: /* STM32F0x devices */
+ case CORTEX_M0P_PARTNO: /* APM32F0x devices */
+ addr->device_id = 0x40015800;
+ addr->flash_size = 0x1FFFF7CC;
+ return ERROR_OK;
+ case CORTEX_M3_PARTNO: /* STM32F1x devices */
+ addr->device_id = 0xE0042000;
+ addr->flash_size = 0x1FFFF7E0;
+ return ERROR_OK;
+ case CORTEX_M4_PARTNO: /* STM32F3x devices */
+ addr->device_id = 0xE0042000;
+ addr->flash_size = 0x1FFFF7CC;
+ return ERROR_OK;
+ case CORTEX_M23_PARTNO: /* GD32E23x devices */
+ addr->device_id = 0x40015800;
+ addr->flash_size = 0x1FFFF7E0;
+ return ERROR_OK;
+ case CORTEX_M_PARTNO_INVALID:
+ /* Check for GD32VF103 with RISC-V CPU */
+ if (strcmp(target_type_name(target), "riscv") == 0
+ && target_address_bits(target) == 32) {
+ /* There is nothing like arm common_magic in riscv_info_t
+ * check text name of target and if target is 32-bit
+ */
+ addr->device_id = 0xE0042000;
+ addr->flash_size = 0x1FFFF7E0;
+ return ERROR_OK;
+ }
+ /* fallthrough */
+ default:
+ LOG_ERROR("Cannot identify target as a stm32x");
+ return ERROR_FAIL;
+ }
+}
+
+static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
+{
+ struct target *target = bank->target;
+ struct stm32x_property_addr addr;
+
+ int retval = stm32x_get_property_addr(target, &addr);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return target_read_u32(target, addr.device_id, device_id);
+}
+
+static int stm32x_get_flash_size(struct flash_bank *bank, uint16_t *flash_size_in_kb)
+{
+ struct target *target = bank->target;
+ struct stm32x_property_addr addr;
+
+ int retval = stm32x_get_property_addr(target, &addr);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return target_read_u16(target, addr.flash_size, flash_size_in_kb);
}
static int stm32x_probe(struct flash_bank *bank)
{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
- int i;
uint16_t flash_size_in_kb;
- uint32_t device_id;
+ uint16_t max_flash_size_in_kb;
+ uint32_t dbgmcu_idcode;
int page_size;
uint32_t base_address = 0x08000000;
- stm32x_info->probed = 0;
+ stm32x_info->probed = false;
stm32x_info->register_base = FLASH_REG_BASE_B0;
+ stm32x_info->user_data_offset = 10;
+ stm32x_info->option_offset = 0;
+
+ /* default factory read protection level 0 */
+ stm32x_info->default_rdp = 0xA5;
/* read stm32 device id register */
- int retval = stm32x_get_device_id(bank, &device_id);
+ int retval = stm32x_get_device_id(bank, &dbgmcu_idcode);
if (retval != ERROR_OK)
return retval;
- LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
+ LOG_INFO("device id = 0x%08" PRIx32 "", dbgmcu_idcode);
- /* get flash size from target. */
- retval = stm32x_get_flash_size(bank, &flash_size_in_kb);
- if (retval != ERROR_OK) {
- LOG_WARNING("failed reading flash size, default to max target family");
- /* failed reading flash size, default to max target family */
- flash_size_in_kb = 0xffff;
- }
+ uint16_t device_id = dbgmcu_idcode & 0xfff;
+ uint16_t rev_id = dbgmcu_idcode >> 16;
- if ((device_id & 0xfff) == 0x410) {
- /* medium density - we have 1k pages
- * 4 pages for a protection area */
+ /* set page size, protection granularity and max flash size depending on family */
+ switch (device_id) {
+ case 0x440: /* stm32f05x */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revA */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
- flash_size_in_kb = 128;
- }
- } else if ((device_id & 0xfff) == 0x412) {
- /* low density - we have 1k pages
- * 4 pages for a protection area */
+ max_flash_size_in_kb = 64;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x444: /* stm32f03x */
+ case 0x445: /* stm32f04x */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revA */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 32k flash");
- flash_size_in_kb = 32;
+ max_flash_size_in_kb = 32;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x448: /* stm32f07x */
+ page_size = 2048;
+ stm32x_info->ppage_size = 4;
+ max_flash_size_in_kb = 128;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x442: /* stm32f09x */
+ page_size = 2048;
+ stm32x_info->ppage_size = 4;
+ max_flash_size_in_kb = 256;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x410: /* stm32f1x medium-density */
+ page_size = 1024;
+ stm32x_info->ppage_size = 4;
+ max_flash_size_in_kb = 128;
+ /* GigaDevice GD32F1x0 & GD32F3x0 & GD32E23x series devices
+ share DEV_ID with STM32F101/2/3 medium-density line,
+ however they use a REV_ID different from any STM32 device.
+ The main difference is another offset of user option bits
+ (like WDG_SW, nRST_STOP, nRST_STDBY) in option byte register
+ (FLASH_OBR/FMC_OBSTAT 0x4002201C).
+ This caused problems e.g. during flash block programming
+ because of unexpected active hardware watchog. */
+ switch (rev_id) {
+ case 0x1303: /* gd32f1x0 */
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ max_flash_size_in_kb = 64;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x1704: /* gd32f3x0 */
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x1906: /* gd32vf103 */
+ break;
+ case 0x1909: /* gd32e23x */
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ max_flash_size_in_kb = 64;
+ stm32x_info->can_load_options = true;
+ break;
}
- } else if ((device_id & 0xfff) == 0x414) {
- /* high density - we have 2k pages
- * 2 pages for a protection area */
+ break;
+ case 0x412: /* stm32f1x low-density */
+ page_size = 1024;
+ stm32x_info->ppage_size = 4;
+ max_flash_size_in_kb = 32;
+ break;
+ case 0x414: /* stm32f1x high-density */
page_size = 2048;
stm32x_info->ppage_size = 2;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revZ */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 512k flash");
- flash_size_in_kb = 512;
- }
- } else if ((device_id & 0xfff) == 0x418) {
- /* connectivity line density - we have 2k pages
- * 2 pages for a protection area */
+ max_flash_size_in_kb = 512;
+ break;
+ case 0x418: /* stm32f1x connectivity */
page_size = 2048;
stm32x_info->ppage_size = 2;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revZ */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash");
- flash_size_in_kb = 256;
- }
- } else if ((device_id & 0xfff) == 0x420) {
- /* value line density - we have 1k pages
- * 4 pages for a protection area */
+ max_flash_size_in_kb = 256;
+ break;
+ case 0x430: /* stm32f1 XL-density (dual flash banks) */
+ page_size = 2048;
+ stm32x_info->ppage_size = 2;
+ max_flash_size_in_kb = 1024;
+ stm32x_info->has_dual_banks = true;
+ break;
+ case 0x420: /* stm32f100xx low- and medium-density value line */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
- flash_size_in_kb = 128;
- }
- } else if ((device_id & 0xfff) == 0x422) {
- /* stm32f30x - we have 2k pages
- * 2 pages for a protection area */
+ max_flash_size_in_kb = 128;
+ break;
+ case 0x428: /* stm32f100xx high-density value line */
+ page_size = 2048;
+ stm32x_info->ppage_size = 4;
+ max_flash_size_in_kb = 512;
+ break;
+ case 0x422: /* stm32f302/3xb/c */
page_size = 2048;
stm32x_info->ppage_size = 2;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash");
- flash_size_in_kb = 256;
- }
- } else if ((device_id & 0xfff) == 0x428) {
- /* value line High density - we have 2k pages
- * 4 pages for a protection area */
+ max_flash_size_in_kb = 256;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x446: /* stm32f303xD/E */
page_size = 2048;
- stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
- flash_size_in_kb = 128;
- }
- } else if ((device_id & 0xfff) == 0x430) {
- /* xl line density - we have 2k pages
- * 2 pages for a protection area */
+ stm32x_info->ppage_size = 2;
+ max_flash_size_in_kb = 512;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x432: /* stm32f37x */
page_size = 2048;
stm32x_info->ppage_size = 2;
- stm32x_info->has_dual_banks = true;
+ max_flash_size_in_kb = 256;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ case 0x438: /* stm32f33x */
+ case 0x439: /* stm32f302x6/8 */
+ page_size = 2048;
+ stm32x_info->ppage_size = 2;
+ max_flash_size_in_kb = 64;
+ stm32x_info->user_data_offset = 16;
+ stm32x_info->option_offset = 6;
+ stm32x_info->default_rdp = 0xAA;
+ stm32x_info->can_load_options = true;
+ break;
+ default:
+ LOG_WARNING("Cannot identify target as a STM32 family.");
+ return ERROR_FAIL;
+ }
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 1024k flash");
- flash_size_in_kb = 1024;
- }
+ /* get flash size from target. */
+ retval = stm32x_get_flash_size(bank, &flash_size_in_kb);
+
+ /* failed reading flash size or flash size invalid (early silicon),
+ * default to max target family */
+ if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
+ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
+ max_flash_size_in_kb);
+ flash_size_in_kb = max_flash_size_in_kb;
+ }
+ if (stm32x_info->has_dual_banks) {
/* split reported size into matching bank */
if (bank->base != 0x08080000) {
/* bank 0 will be fixed 512k */
stm32x_info->register_base = FLASH_REG_BASE_B1;
base_address = 0x08080000;
}
- } else if ((device_id & 0xfff) == 0x432) {
- /* stm32f37x - we have 2k pages
- * 2 pages for a protection area */
- page_size = 2048;
- stm32x_info->ppage_size = 2;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash");
- flash_size_in_kb = 256;
- }
- } else if ((device_id & 0xfff) == 0x440) {
- /* stm32f0x - we have 1k pages
- * 4 pages for a protection area */
- page_size = 1024;
- stm32x_info->ppage_size = 4;
+ }
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revZ */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 64k flash");
- flash_size_in_kb = 64;
- }
- } else {
- LOG_WARNING("Cannot identify target as a STM32 family.");
- return ERROR_FAIL;
+ /* if the user sets the size manually then ignore the probed value
+ * this allows us to work around devices that have a invalid flash size register value */
+ if (stm32x_info->user_bank_size) {
+ LOG_INFO("ignoring flash probed value, using configured bank size");
+ flash_size_in_kb = stm32x_info->user_bank_size / 1024;
}
- LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
+ LOG_INFO("flash size = %d KiB", flash_size_in_kb);
/* did we assign flash size? */
assert(flash_size_in_kb != 0xffff);
/* check that calculation result makes sense */
assert(num_pages > 0);
- if (bank->sectors) {
- free(bank->sectors);
- bank->sectors = NULL;
- }
+ free(bank->sectors);
+ bank->sectors = NULL;
+
+ free(bank->prot_blocks);
+ bank->prot_blocks = NULL;
bank->base = base_address;
bank->size = (num_pages * page_size);
+
bank->num_sectors = num_pages;
- bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
+ bank->sectors = alloc_block_array(0, page_size, num_pages);
+ if (!bank->sectors)
+ return ERROR_FAIL;
- for (i = 0; i < num_pages; i++) {
- bank->sectors[i].offset = i * page_size;
- bank->sectors[i].size = page_size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
+ /* calculate number of write protection blocks */
+ int num_prot_blocks = num_pages / stm32x_info->ppage_size;
+ if (num_prot_blocks > 32)
+ num_prot_blocks = 32;
+
+ bank->num_prot_blocks = num_prot_blocks;
+ bank->prot_blocks = alloc_block_array(0, stm32x_info->ppage_size * page_size, num_prot_blocks);
+ if (!bank->prot_blocks)
+ return ERROR_FAIL;
+
+ if (num_prot_blocks == 32)
+ bank->prot_blocks[31].size = (num_pages - (31 * stm32x_info->ppage_size)) * page_size;
- stm32x_info->probed = 1;
+ stm32x_info->probed = true;
return ERROR_OK;
}
}
#endif
-static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
+static const char *get_stm32f0_revision(uint16_t rev_id)
{
- uint32_t device_id;
- int printed;
+ const char *rev_str = NULL;
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "1.0";
+ break;
+ case 0x2000:
+ rev_str = "2.0";
+ break;
+ }
+ return rev_str;
+}
- /* read stm32 device id register */
- int retval = stm32x_get_device_id(bank, &device_id);
+static int get_stm32x_info(struct flash_bank *bank, struct command_invocation *cmd)
+{
+ uint32_t dbgmcu_idcode;
+
+ /* read stm32 device id register */
+ int retval = stm32x_get_device_id(bank, &dbgmcu_idcode);
if (retval != ERROR_OK)
return retval;
- if ((device_id & 0xfff) == 0x410) {
- printed = snprintf(buf, buf_size, "stm32x (Medium Density) - Rev: ");
- buf += printed;
- buf_size -= printed;
+ uint16_t device_id = dbgmcu_idcode & 0xfff;
+ uint16_t rev_id = dbgmcu_idcode >> 16;
+ const char *device_str;
+ const char *rev_str = NULL;
+
+ switch (device_id) {
+ case 0x410:
+ device_str = "STM32F10x (Medium Density)";
+
+ switch (rev_id) {
+ case 0x0000:
+ rev_str = "A";
+ break;
+
+ case 0x1303: /* gd32f1x0 */
+ device_str = "GD32F1x0";
+ break;
+
+ case 0x1704: /* gd32f3x0 */
+ device_str = "GD32F3x0";
+ break;
+
+ case 0x1906:
+ device_str = "GD32VF103";
+ break;
+
+ case 0x1909: /* gd32e23x */
+ device_str = "GD32E23x";
+ break;
+
+ case 0x2000:
+ rev_str = "B";
+ break;
+
+ case 0x2001:
+ rev_str = "Z";
+ break;
+
+ case 0x2003:
+ rev_str = "Y";
+ break;
+ }
+ break;
+
+ case 0x412:
+ device_str = "STM32F10x (Low Density)";
- switch (device_id >> 16) {
- case 0x0000:
- snprintf(buf, buf_size, "A");
- break;
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+ }
+ break;
- case 0x2000:
- snprintf(buf, buf_size, "B");
- break;
+ case 0x414:
+ device_str = "STM32F10x (High Density)";
- case 0x2001:
- snprintf(buf, buf_size, "Z");
- break;
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
- case 0x2003:
- snprintf(buf, buf_size, "Y");
- break;
+ case 0x1001:
+ rev_str = "Z";
+ break;
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ case 0x1003:
+ rev_str = "Y";
+ break;
}
- } else if ((device_id & 0xfff) == 0x412) {
- printed = snprintf(buf, buf_size, "stm32x (Low Density) - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "A");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x418:
+ device_str = "STM32F10x (Connectivity)";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+
+ case 0x1001:
+ rev_str = "Z";
+ break;
}
- } else if ((device_id & 0xfff) == 0x414) {
- printed = snprintf(buf, buf_size, "stm32x (High Density) - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "A");
- break;
-
- case 0x1001:
- snprintf(buf, buf_size, "Z");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x420:
+ device_str = "STM32F100 (Low/Medium Density)";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+
+ case 0x1001:
+ rev_str = "Z";
+ break;
}
- } else if ((device_id & 0xfff) == 0x418) {
- printed = snprintf(buf, buf_size, "stm32x (Connectivity) - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "A");
- break;
-
- case 0x1001:
- snprintf(buf, buf_size, "Z");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x422:
+ device_str = "STM32F302xB/C";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+
+ case 0x1001:
+ rev_str = "Z";
+ break;
+
+ case 0x1003:
+ rev_str = "Y";
+ break;
+
+ case 0x2000:
+ rev_str = "B";
+ break;
}
- } else if ((device_id & 0xfff) == 0x420) {
- printed = snprintf(buf, buf_size, "stm32x (Value) - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "A");
- break;
-
- case 0x1001:
- snprintf(buf, buf_size, "Z");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x428:
+ device_str = "STM32F100 (High Density)";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+
+ case 0x1001:
+ rev_str = "Z";
+ break;
}
- } else if ((device_id & 0xfff) == 0x422) {
- printed = snprintf(buf, buf_size, "stm32f30x - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "1.0");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x430:
+ device_str = "STM32F10x (XL Density)";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
}
- } else if ((device_id & 0xfff) == 0x428) {
- printed = snprintf(buf, buf_size, "stm32x (Value HD) - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "A");
- break;
-
- case 0x1001:
- snprintf(buf, buf_size, "Z");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x432:
+ device_str = "STM32F37x";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+
+ case 0x2000:
+ rev_str = "B";
+ break;
}
- } else if ((device_id & 0xfff) == 0x430) {
- printed = snprintf(buf, buf_size, "stm32x (XL) - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "A");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x438:
+ device_str = "STM32F33x";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
}
- } else if ((device_id & 0xfff) == 0x432) {
- printed = snprintf(buf, buf_size, "stm32f37x - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "1.0");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x439:
+ device_str = "STM32F302x6/8";
+
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
+
+ case 0x1001:
+ rev_str = "Z";
+ break;
}
- } else if ((device_id & 0xfff) == 0x440) {
- printed = snprintf(buf, buf_size, "stm32f0x - Rev: ");
- buf += printed;
- buf_size -= printed;
-
- switch (device_id >> 16) {
- case 0x1000:
- snprintf(buf, buf_size, "1.0");
- break;
-
- case 0x2000:
- snprintf(buf, buf_size, "2.0");
- break;
-
- default:
- snprintf(buf, buf_size, "unknown");
- break;
+ break;
+
+ case 0x444:
+ device_str = "STM32F03x";
+ rev_str = get_stm32f0_revision(rev_id);
+ break;
+
+ case 0x440:
+ device_str = "STM32F05x";
+ rev_str = get_stm32f0_revision(rev_id);
+ break;
+
+ case 0x445:
+ device_str = "STM32F04x";
+ rev_str = get_stm32f0_revision(rev_id);
+ break;
+
+ case 0x446:
+ device_str = "STM32F303xD/E";
+ switch (rev_id) {
+ case 0x1000:
+ rev_str = "A";
+ break;
}
- } else {
- snprintf(buf, buf_size, "Cannot identify target as a stm32x\n");
+ break;
+
+ case 0x448:
+ device_str = "STM32F07x";
+ rev_str = get_stm32f0_revision(rev_id);
+ break;
+
+ case 0x442:
+ device_str = "STM32F09x";
+ rev_str = get_stm32f0_revision(rev_id);
+ break;
+
+ default:
+ command_print_sameline(cmd, "Cannot identify target as a STM32F0/1/3\n");
return ERROR_FAIL;
}
+ if (rev_str)
+ command_print_sameline(cmd, "%s - Rev: %s", device_str, rev_str);
+ else
+ command_print_sameline(cmd, "%s - Rev: unknown (0x%04x)", device_str, rev_id);
+
return ERROR_OK;
}
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
stm32x_info = bank->driver_priv;
}
retval = stm32x_check_operation_supported(bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
if (stm32x_erase_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "stm32x failed to erase options");
+ command_print(CMD, "stm32x failed to erase options");
return ERROR_OK;
}
/* set readout protection */
- stm32x_info->option_bytes.RDP = 0;
+ stm32x_info->option_bytes.rdp = 0;
if (stm32x_write_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "stm32x failed to lock device");
+ command_print(CMD, "stm32x failed to lock device");
return ERROR_OK;
}
- command_print(CMD_CTX, "stm32x locked");
+ command_print(CMD, "stm32x locked");
return ERROR_OK;
}
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
target = bank->target;
}
retval = stm32x_check_operation_supported(bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
if (stm32x_erase_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "stm32x failed to unlock device");
+ command_print(CMD, "stm32x failed to erase options");
return ERROR_OK;
}
if (stm32x_write_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "stm32x failed to lock device");
+ command_print(CMD, "stm32x failed to unlock device");
return ERROR_OK;
}
- command_print(CMD_CTX, "stm32x unlocked.\n"
+ command_print(CMD, "stm32x unlocked.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.");
COMMAND_HANDLER(stm32x_handle_options_read_command)
{
- uint32_t optionbyte;
+ uint32_t optionbyte, protection;
struct target *target = NULL;
struct stm32x_flash_bank *stm32x_info = NULL;
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
stm32x_info = bank->driver_priv;
}
retval = stm32x_check_operation_supported(bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
retval = target_read_u32(target, STM32_FLASH_OBR_B0, &optionbyte);
if (retval != ERROR_OK)
return retval;
- command_print(CMD_CTX, "Option Byte: 0x%" PRIx32 "", optionbyte);
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_ERROR, 1))
- command_print(CMD_CTX, "Option Byte Complement Error");
+ uint16_t user_data = optionbyte >> stm32x_info->user_data_offset;
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_READOUT, 1))
- command_print(CMD_CTX, "Readout Protection On");
- else
- command_print(CMD_CTX, "Readout Protection Off");
+ retval = target_read_u32(target, STM32_FLASH_WRPR_B0, &protection);
+ if (retval != ERROR_OK)
+ return retval;
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDWDGSW, 1))
- command_print(CMD_CTX, "Software Watchdog");
- else
- command_print(CMD_CTX, "Hardware Watchdog");
+ if (optionbyte & (1 << OPT_ERROR))
+ command_print(CMD, "option byte complement error");
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTOP, 1))
- command_print(CMD_CTX, "Stop: No reset generated");
- else
- command_print(CMD_CTX, "Stop: Reset generated");
+ command_print(CMD, "option byte register = 0x%" PRIx32 "", optionbyte);
+ command_print(CMD, "write protection register = 0x%" PRIx32 "", protection);
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTDBY, 1))
- command_print(CMD_CTX, "Standby: No reset generated");
- else
- command_print(CMD_CTX, "Standby: Reset generated");
+ command_print(CMD, "read protection: %s",
+ (optionbyte & (1 << OPT_READOUT)) ? "on" : "off");
- if (stm32x_info->has_dual_banks) {
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_BFB2, 1))
- command_print(CMD_CTX, "Boot: Bank 0");
- else
- command_print(CMD_CTX, "Boot: Bank 1");
- }
+ /* user option bytes are offset depending on variant */
+ optionbyte >>= stm32x_info->option_offset;
+
+ command_print(CMD, "watchdog: %sware",
+ (optionbyte & (1 << OPT_RDWDGSW)) ? "soft" : "hard");
+
+ command_print(CMD, "stop mode: %sreset generated upon entry",
+ (optionbyte & (1 << OPT_RDRSTSTOP)) ? "no " : "");
+
+ command_print(CMD, "standby mode: %sreset generated upon entry",
+ (optionbyte & (1 << OPT_RDRSTSTDBY)) ? "no " : "");
+
+ if (stm32x_info->has_dual_banks)
+ command_print(CMD, "boot: bank %d", (optionbyte & (1 << OPT_BFB2)) ? 0 : 1);
+
+ command_print(CMD, "user data = 0x%02" PRIx16 "", user_data);
return ERROR_OK;
}
{
struct target *target = NULL;
struct stm32x_flash_bank *stm32x_info = NULL;
- uint16_t optionbyte = 0xF8;
+ uint8_t optionbyte;
+ uint16_t useropt;
- if (CMD_ARGC < 4)
+ if (CMD_ARGC < 2)
return ERROR_COMMAND_SYNTAX_ERROR;
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
stm32x_info = bank->driver_priv;
}
retval = stm32x_check_operation_supported(bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
- /* REVISIT: ignores some options which we will display...
- * and doesn't insist on the specified syntax.
- */
+ retval = stm32x_read_options(bank);
+ if (retval != ERROR_OK)
+ return retval;
- /* OPT_RDWDGSW */
- if (strcmp(CMD_ARGV[1], "SWWDG") == 0)
- optionbyte |= (1 << 0);
- else /* REVISIT must be "HWWDG" then ... */
- optionbyte &= ~(1 << 0);
-
- /* OPT_RDRSTSTOP */
- if (strcmp(CMD_ARGV[2], "NORSTSTOP") == 0)
- optionbyte |= (1 << 1);
- else /* REVISIT must be "RSTSTNDBY" then ... */
- optionbyte &= ~(1 << 1);
-
- /* OPT_RDRSTSTDBY */
- if (strcmp(CMD_ARGV[3], "NORSTSTNDBY") == 0)
- optionbyte |= (1 << 2);
- else /* REVISIT must be "RSTSTOP" then ... */
- optionbyte &= ~(1 << 2);
-
- if (CMD_ARGC > 4 && stm32x_info->has_dual_banks) {
- /* OPT_BFB2 */
- if (strcmp(CMD_ARGV[4], "BOOT0") == 0)
- optionbyte |= (1 << 3);
- else
- optionbyte &= ~(1 << 3);
+ /* start with current options */
+ optionbyte = stm32x_info->option_bytes.user;
+ useropt = stm32x_info->option_bytes.data;
+
+ /* skip over flash bank */
+ CMD_ARGC--;
+ CMD_ARGV++;
+
+ while (CMD_ARGC) {
+ if (strcmp("SWWDG", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 0);
+ else if (strcmp("HWWDG", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 0);
+ else if (strcmp("NORSTSTOP", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 1);
+ else if (strcmp("RSTSTOP", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 1);
+ else if (strcmp("NORSTSTNDBY", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 2);
+ else if (strcmp("RSTSTNDBY", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 2);
+ else if (strcmp("USEROPT", CMD_ARGV[0]) == 0) {
+ if (CMD_ARGC < 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_NUMBER(u16, CMD_ARGV[1], useropt);
+ CMD_ARGC--;
+ CMD_ARGV++;
+ } else if (stm32x_info->has_dual_banks) {
+ if (strcmp("BOOT0", CMD_ARGV[0]) == 0)
+ optionbyte |= (1 << 3);
+ else if (strcmp("BOOT1", CMD_ARGV[0]) == 0)
+ optionbyte &= ~(1 << 3);
+ else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ } else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ CMD_ARGC--;
+ CMD_ARGV++;
}
if (stm32x_erase_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "stm32x failed to erase options");
+ command_print(CMD, "stm32x failed to erase options");
return ERROR_OK;
}
- stm32x_info->option_bytes.user_options = optionbyte;
+ stm32x_info->option_bytes.user = optionbyte;
+ stm32x_info->option_bytes.data = useropt;
if (stm32x_write_options(bank) != ERROR_OK) {
- command_print(CMD_CTX, "stm32x failed to write options");
+ command_print(CMD, "stm32x failed to write options");
return ERROR_OK;
}
- command_print(CMD_CTX, "stm32x write options complete.\n"
- "INFO: a reset or power cycle is required "
- "for the new settings to take effect.");
+ command_print(CMD, "stm32x write options complete.\n"
+ "INFO: %spower cycle is required "
+ "for the new settings to take effect.",
+ stm32x_info->can_load_options
+ ? "'stm32f1x options_load' command or " : "");
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(stm32x_handle_options_load_command)
+{
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
+
+ if (!stm32x_info->can_load_options) {
+ LOG_ERROR("Command not applicable to stm32f1x devices - power cycle is "
+ "required instead.");
+ return ERROR_FAIL;
+ }
+
+ struct target *target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = stm32x_check_operation_supported(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* unlock option flash registers */
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY1);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
+ if (retval != ERROR_OK) {
+ (void)target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+ return retval;
+ }
+
+ /* force re-load of option bytes - generates software reset */
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_OBL_LAUNCH);
+ if (retval != ERROR_OK)
+ return retval;
return ERROR_OK;
}
return retval;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_KEYR), KEY2);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
/* mass erase flash memory */
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR),
FLASH_MER | FLASH_STRT);
if (retval != ERROR_OK)
- return retval;
+ goto flash_lock;
- retval = stm32x_wait_status_busy(bank, 100);
- if (retval != ERROR_OK)
- return retval;
-
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
- if (retval != ERROR_OK)
- return retval;
+ retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
- return ERROR_OK;
+flash_lock:
+ {
+ int retval2 = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+ if (retval == ERROR_OK)
+ retval = retval2;
+ }
+ return retval;
}
COMMAND_HANDLER(stm32x_handle_mass_erase_command)
{
- int i;
-
if (CMD_ARGC < 1)
return ERROR_COMMAND_SYNTAX_ERROR;
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
retval = stm32x_mass_erase(bank);
- if (retval == ERROR_OK) {
- /* set all sectors as erased */
- for (i = 0; i < bank->num_sectors; i++)
- bank->sectors[i].is_erased = 1;
-
- command_print(CMD_CTX, "stm32x mass erase complete");
- } else
- command_print(CMD_CTX, "stm32x mass erase failed");
+ if (retval == ERROR_OK)
+ command_print(CMD, "stm32x mass erase complete");
+ else
+ command_print(CMD, "stm32x mass erase failed");
return retval;
}
-static const struct command_registration stm32x_exec_command_handlers[] = {
+static const struct command_registration stm32f1x_exec_command_handlers[] = {
{
.name = "lock",
.handler = stm32x_handle_lock_command,
.handler = stm32x_handle_options_read_command,
.mode = COMMAND_EXEC,
.usage = "bank_id",
- .help = "Read and display device option byte.",
+ .help = "Read and display device option bytes.",
},
{
.name = "options_write",
.mode = COMMAND_EXEC,
.usage = "bank_id ('SWWDG'|'HWWDG') "
"('RSTSTNDBY'|'NORSTSTNDBY') "
- "('RSTSTOP'|'NORSTSTOP')",
- .help = "Replace bits in device option byte.",
+ "('RSTSTOP'|'NORSTSTOP') ('USEROPT' user_data)",
+ .help = "Replace bits in device option bytes.",
+ },
+ {
+ .name = "options_load",
+ .handler = stm32x_handle_options_load_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "Force re-load of device option bytes.",
},
COMMAND_REGISTRATION_DONE
};
-static const struct command_registration stm32x_command_handlers[] = {
+static const struct command_registration stm32f1x_command_handlers[] = {
{
.name = "stm32f1x",
.mode = COMMAND_ANY,
.help = "stm32f1x flash command group",
.usage = "",
- .chain = stm32x_exec_command_handlers,
+ .chain = stm32f1x_exec_command_handlers,
},
COMMAND_REGISTRATION_DONE
};
-struct flash_driver stm32f1x_flash = {
+const struct flash_driver stm32f1x_flash = {
.name = "stm32f1x",
- .commands = stm32x_command_handlers,
+ .commands = stm32f1x_command_handlers,
.flash_bank_command = stm32x_flash_bank_command,
.erase = stm32x_erase,
.protect = stm32x_protect,
.erase_check = default_flash_blank_check,
.protect_check = stm32x_protect_check,
.info = get_stm32x_info,
+ .free_driver_priv = default_flash_free_driver_priv,
};
Code Review / openocd.git / blobdiff