+// SPDX-License-Identifier: GPL-2.0-or-later
+
/***************************************************************************
* Copyright (C) 2013 Synapse Product Development *
* Andrey Smirnov <andrew.smironv@gmail.com> *
* Angus Gratton <gus@projectgus.com> *
* Erdem U. Altunyurt <spamjunkeater@gmail.com> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#endif
#include "imp.h"
+#include <helper/binarybuffer.h>
#include <target/algorithm.h>
#include <target/armv7m.h>
#include <helper/types.h>
#include <helper/time_support.h>
+#include <helper/bits.h>
+
+/* Both those values are constant across the current spectrum ofr nRF5 devices */
+#define WATCHDOG_REFRESH_REGISTER 0x40010600
+#define WATCHDOG_REFRESH_VALUE 0x6e524635
enum {
NRF5_FLASH_BASE = 0x00000000,
NRF5_FICR_CODEPAGESIZE = NRF5_FICR_REG(0x010),
NRF5_FICR_CODESIZE = NRF5_FICR_REG(0x014),
- NRF5_FICR_CLENR0 = NRF5_FICR_REG(0x028),
- NRF5_FICR_PPFC = NRF5_FICR_REG(0x02C),
- NRF5_FICR_NUMRAMBLOCK = NRF5_FICR_REG(0x034),
- NRF5_FICR_SIZERAMBLOCK0 = NRF5_FICR_REG(0x038),
- NRF5_FICR_SIZERAMBLOCK1 = NRF5_FICR_REG(0x03C),
- NRF5_FICR_SIZERAMBLOCK2 = NRF5_FICR_REG(0x040),
- NRF5_FICR_SIZERAMBLOCK3 = NRF5_FICR_REG(0x044),
+
+ NRF51_FICR_CLENR0 = NRF5_FICR_REG(0x028),
+ NRF51_FICR_PPFC = NRF5_FICR_REG(0x02C),
+ NRF51_FICR_NUMRAMBLOCK = NRF5_FICR_REG(0x034),
+ NRF51_FICR_SIZERAMBLOCK0 = NRF5_FICR_REG(0x038),
+ NRF51_FICR_SIZERAMBLOCK1 = NRF5_FICR_REG(0x03C),
+ NRF51_FICR_SIZERAMBLOCK2 = NRF5_FICR_REG(0x040),
+ NRF51_FICR_SIZERAMBLOCK3 = NRF5_FICR_REG(0x044),
+
+ /* CONFIGID is documented on nRF51 series only.
+ * On nRF52 is present but not documented */
NRF5_FICR_CONFIGID = NRF5_FICR_REG(0x05C),
- NRF5_FICR_DEVICEID0 = NRF5_FICR_REG(0x060),
- NRF5_FICR_DEVICEID1 = NRF5_FICR_REG(0x064),
- NRF5_FICR_ER0 = NRF5_FICR_REG(0x080),
- NRF5_FICR_ER1 = NRF5_FICR_REG(0x084),
- NRF5_FICR_ER2 = NRF5_FICR_REG(0x088),
- NRF5_FICR_ER3 = NRF5_FICR_REG(0x08C),
- NRF5_FICR_IR0 = NRF5_FICR_REG(0x090),
- NRF5_FICR_IR1 = NRF5_FICR_REG(0x094),
- NRF5_FICR_IR2 = NRF5_FICR_REG(0x098),
- NRF5_FICR_IR3 = NRF5_FICR_REG(0x09C),
- NRF5_FICR_DEVICEADDRTYPE = NRF5_FICR_REG(0x0A0),
- NRF5_FICR_DEVICEADDR0 = NRF5_FICR_REG(0x0A4),
- NRF5_FICR_DEVICEADDR1 = NRF5_FICR_REG(0x0A8),
- NRF5_FICR_OVERRIDEN = NRF5_FICR_REG(0x0AC),
- NRF5_FICR_NRF_1MBIT0 = NRF5_FICR_REG(0x0B0),
- NRF5_FICR_NRF_1MBIT1 = NRF5_FICR_REG(0x0B4),
- NRF5_FICR_NRF_1MBIT2 = NRF5_FICR_REG(0x0B8),
- NRF5_FICR_NRF_1MBIT3 = NRF5_FICR_REG(0x0BC),
- NRF5_FICR_NRF_1MBIT4 = NRF5_FICR_REG(0x0C0),
- NRF5_FICR_BLE_1MBIT0 = NRF5_FICR_REG(0x0EC),
- NRF5_FICR_BLE_1MBIT1 = NRF5_FICR_REG(0x0F0),
- NRF5_FICR_BLE_1MBIT2 = NRF5_FICR_REG(0x0F4),
- NRF5_FICR_BLE_1MBIT3 = NRF5_FICR_REG(0x0F8),
- NRF5_FICR_BLE_1MBIT4 = NRF5_FICR_REG(0x0FC),
+
+ /* Following registers are available on nRF52 and on nRF51 since rev 3 */
+ NRF5_FICR_INFO_PART = NRF5_FICR_REG(0x100),
+ NRF5_FICR_INFO_VARIANT = NRF5_FICR_REG(0x104),
+ NRF5_FICR_INFO_PACKAGE = NRF5_FICR_REG(0x108),
+ NRF5_FICR_INFO_RAM = NRF5_FICR_REG(0x10C),
+ NRF5_FICR_INFO_FLASH = NRF5_FICR_REG(0x110),
};
enum nrf5_uicr_registers {
NRF5_UICR_BASE = 0x10001000, /* User Information
- * Configuration Regsters */
-
- NRF5_UICR_SIZE = 0x100,
+ * Configuration Registers */
#define NRF5_UICR_REG(offset) (NRF5_UICR_BASE + offset)
- NRF5_UICR_CLENR0 = NRF5_UICR_REG(0x000),
- NRF5_UICR_RBPCONF = NRF5_UICR_REG(0x004),
- NRF5_UICR_XTALFREQ = NRF5_UICR_REG(0x008),
- NRF5_UICR_FWID = NRF5_UICR_REG(0x010),
+ NRF51_UICR_CLENR0 = NRF5_UICR_REG(0x000),
};
enum nrf5_nvmc_registers {
NRF5_NVMC_BASE = 0x4001E000, /* Non-Volatile Memory
- * Controller Regsters */
+ * Controller Registers */
#define NRF5_NVMC_REG(offset) (NRF5_NVMC_BASE + offset)
NRF5_NVMC_ERASEPAGE = NRF5_NVMC_REG(0x508),
NRF5_NVMC_ERASEALL = NRF5_NVMC_REG(0x50C),
NRF5_NVMC_ERASEUICR = NRF5_NVMC_REG(0x514),
+
+ NRF5_BPROT_BASE = 0x40000000,
};
enum nrf5_nvmc_config_bits {
};
+struct nrf52_ficr_info {
+ uint32_t part;
+ uint32_t variant;
+ uint32_t package;
+ uint32_t ram;
+ uint32_t flash;
+};
+
+enum nrf5_features {
+ NRF5_FEATURE_SERIES_51 = BIT(0),
+ NRF5_FEATURE_SERIES_52 = BIT(1),
+ NRF5_FEATURE_BPROT = BIT(2),
+ NRF5_FEATURE_ACL_PROT = BIT(3),
+};
+
+struct nrf5_device_spec {
+ uint16_t hwid;
+ const char *part;
+ const char *variant;
+ const char *build_code;
+ unsigned int flash_size_kb;
+ enum nrf5_features features;
+};
+
struct nrf5_info {
- uint32_t code_page_size;
- uint32_t refcount;
+ unsigned int refcount;
struct nrf5_bank {
struct nrf5_info *chip;
bool probed;
- int (*write) (struct flash_bank *bank,
- struct nrf5_info *chip,
- const uint8_t *buffer, uint32_t offset, uint32_t count);
} bank[2];
struct target *target;
-};
-struct nrf5_device_spec {
+ /* chip identification stored in nrf5_probe() for use in nrf5_info() */
+ bool ficr_info_valid;
+ struct nrf52_ficr_info ficr_info;
+ const struct nrf5_device_spec *spec;
uint16_t hwid;
- const char *part;
- const char *variant;
- const char *build_code;
+ enum nrf5_features features;
unsigned int flash_size_kb;
+ unsigned int ram_size_kb;
};
-#define NRF5_DEVICE_DEF(id, pt, var, bcode, fsize) \
+#define NRF51_DEVICE_DEF(id, pt, var, bcode, fsize) \
{ \
.hwid = (id), \
.part = pt, \
.variant = var, \
.build_code = bcode, \
.flash_size_kb = (fsize), \
+.features = NRF5_FEATURE_SERIES_51, \
}
-/* The known devices table below is derived from the "nRF51 Series
- * Compatibility Matrix" document, which can be found by searching for
- * ATTN-51 on the Nordic Semi website:
+/*
+ * The table maps known HWIDs to the part numbers, variant
+ * build code and some other info. For nRF51 rev 1 and 2 devices
+ * this is the only way how to get the part number and variant.
+ *
+ * All tested nRF51 rev 3 devices have FICR INFO fields
+ * but the fields are not documented in RM so we keep HWIDs in
+ * this table.
*
- * http://www.nordicsemi.com/eng/content/search?SearchText=ATTN-51
+ * nRF52 and newer devices have FICR INFO documented, the autodetection
+ * can rely on it and HWIDs table is not used.
+ *
+ * The known devices table below is derived from the "nRF5x series
+ * compatibility matrix" documents.
*
* Up to date with Matrix v2.0, plus some additional HWIDs.
*
*/
static const struct nrf5_device_spec nrf5_known_devices_table[] = {
/* nRF51822 Devices (IC rev 1). */
- NRF5_DEVICE_DEF(0x001D, "51822", "QFAA", "CA/C0", 256),
- NRF5_DEVICE_DEF(0x0026, "51822", "QFAB", "AA", 128),
- NRF5_DEVICE_DEF(0x0027, "51822", "QFAB", "A0", 128),
- NRF5_DEVICE_DEF(0x0020, "51822", "CEAA", "BA", 256),
- NRF5_DEVICE_DEF(0x002F, "51822", "CEAA", "B0", 256),
+ NRF51_DEVICE_DEF(0x001D, "51822", "QFAA", "CA/C0", 256),
+ NRF51_DEVICE_DEF(0x0026, "51822", "QFAB", "AA", 128),
+ NRF51_DEVICE_DEF(0x0027, "51822", "QFAB", "A0", 128),
+ NRF51_DEVICE_DEF(0x0020, "51822", "CEAA", "BA", 256),
+ NRF51_DEVICE_DEF(0x002F, "51822", "CEAA", "B0", 256),
/* Some early nRF51-DK (PCA10028) & nRF51-Dongle (PCA10031) boards
with built-in jlink seem to use engineering samples not listed
in the nRF51 Series Compatibility Matrix V1.0. */
- NRF5_DEVICE_DEF(0x0071, "51822", "QFAC", "AB", 256),
+ NRF51_DEVICE_DEF(0x0071, "51822", "QFAC", "AB", 256),
/* nRF51822 Devices (IC rev 2). */
- NRF5_DEVICE_DEF(0x002A, "51822", "QFAA", "FA0", 256),
- NRF5_DEVICE_DEF(0x0044, "51822", "QFAA", "GC0", 256),
- NRF5_DEVICE_DEF(0x003C, "51822", "QFAA", "G0", 256),
- NRF5_DEVICE_DEF(0x0057, "51822", "QFAA", "G2", 256),
- NRF5_DEVICE_DEF(0x0058, "51822", "QFAA", "G3", 256),
- NRF5_DEVICE_DEF(0x004C, "51822", "QFAB", "B0", 128),
- NRF5_DEVICE_DEF(0x0040, "51822", "CEAA", "CA0", 256),
- NRF5_DEVICE_DEF(0x0047, "51822", "CEAA", "DA0", 256),
- NRF5_DEVICE_DEF(0x004D, "51822", "CEAA", "D00", 256),
+ NRF51_DEVICE_DEF(0x002A, "51822", "QFAA", "FA0", 256),
+ NRF51_DEVICE_DEF(0x0044, "51822", "QFAA", "GC0", 256),
+ NRF51_DEVICE_DEF(0x003C, "51822", "QFAA", "G0", 256),
+ NRF51_DEVICE_DEF(0x0057, "51822", "QFAA", "G2", 256),
+ NRF51_DEVICE_DEF(0x0058, "51822", "QFAA", "G3", 256),
+ NRF51_DEVICE_DEF(0x004C, "51822", "QFAB", "B0", 128),
+ NRF51_DEVICE_DEF(0x0040, "51822", "CEAA", "CA0", 256),
+ NRF51_DEVICE_DEF(0x0047, "51822", "CEAA", "DA0", 256),
+ NRF51_DEVICE_DEF(0x004D, "51822", "CEAA", "D00", 256),
/* nRF51822 Devices (IC rev 3). */
- NRF5_DEVICE_DEF(0x0072, "51822", "QFAA", "H0", 256),
- NRF5_DEVICE_DEF(0x00D1, "51822", "QFAA", "H2", 256),
- NRF5_DEVICE_DEF(0x007B, "51822", "QFAB", "C0", 128),
- NRF5_DEVICE_DEF(0x0083, "51822", "QFAC", "A0", 256),
- NRF5_DEVICE_DEF(0x0084, "51822", "QFAC", "A1", 256),
- NRF5_DEVICE_DEF(0x007D, "51822", "CDAB", "A0", 128),
- NRF5_DEVICE_DEF(0x0079, "51822", "CEAA", "E0", 256),
- NRF5_DEVICE_DEF(0x0087, "51822", "CFAC", "A0", 256),
- NRF5_DEVICE_DEF(0x008F, "51822", "QFAA", "H1", 256),
+ NRF51_DEVICE_DEF(0x0072, "51822", "QFAA", "H0", 256),
+ NRF51_DEVICE_DEF(0x00D1, "51822", "QFAA", "H2", 256),
+ NRF51_DEVICE_DEF(0x007B, "51822", "QFAB", "C0", 128),
+ NRF51_DEVICE_DEF(0x0083, "51822", "QFAC", "A0", 256),
+ NRF51_DEVICE_DEF(0x0084, "51822", "QFAC", "A1", 256),
+ NRF51_DEVICE_DEF(0x007D, "51822", "CDAB", "A0", 128),
+ NRF51_DEVICE_DEF(0x0079, "51822", "CEAA", "E0", 256),
+ NRF51_DEVICE_DEF(0x0087, "51822", "CFAC", "A0", 256),
+ NRF51_DEVICE_DEF(0x008F, "51822", "QFAA", "H1", 256),
/* nRF51422 Devices (IC rev 1). */
- NRF5_DEVICE_DEF(0x001E, "51422", "QFAA", "CA", 256),
- NRF5_DEVICE_DEF(0x0024, "51422", "QFAA", "C0", 256),
- NRF5_DEVICE_DEF(0x0031, "51422", "CEAA", "A0A", 256),
+ NRF51_DEVICE_DEF(0x001E, "51422", "QFAA", "CA", 256),
+ NRF51_DEVICE_DEF(0x0024, "51422", "QFAA", "C0", 256),
+ NRF51_DEVICE_DEF(0x0031, "51422", "CEAA", "A0A", 256),
/* nRF51422 Devices (IC rev 2). */
- NRF5_DEVICE_DEF(0x002D, "51422", "QFAA", "DAA", 256),
- NRF5_DEVICE_DEF(0x002E, "51422", "QFAA", "E0", 256),
- NRF5_DEVICE_DEF(0x0061, "51422", "QFAB", "A00", 128),
- NRF5_DEVICE_DEF(0x0050, "51422", "CEAA", "B0", 256),
+ NRF51_DEVICE_DEF(0x002D, "51422", "QFAA", "DAA", 256),
+ NRF51_DEVICE_DEF(0x002E, "51422", "QFAA", "E0", 256),
+ NRF51_DEVICE_DEF(0x0061, "51422", "QFAB", "A00", 128),
+ NRF51_DEVICE_DEF(0x0050, "51422", "CEAA", "B0", 256),
/* nRF51422 Devices (IC rev 3). */
- NRF5_DEVICE_DEF(0x0073, "51422", "QFAA", "F0", 256),
- NRF5_DEVICE_DEF(0x007C, "51422", "QFAB", "B0", 128),
- NRF5_DEVICE_DEF(0x0085, "51422", "QFAC", "A0", 256),
- NRF5_DEVICE_DEF(0x0086, "51422", "QFAC", "A1", 256),
- NRF5_DEVICE_DEF(0x007E, "51422", "CDAB", "A0", 128),
- NRF5_DEVICE_DEF(0x007A, "51422", "CEAA", "C0", 256),
- NRF5_DEVICE_DEF(0x0088, "51422", "CFAC", "A0", 256),
-
- /* nRF52810 Devices */
- NRF5_DEVICE_DEF(0x0142, "52810", "QFAA", "B0", 192),
- NRF5_DEVICE_DEF(0x0143, "52810", "QCAA", "C0", 192),
-
- /* nRF52832 Devices */
- NRF5_DEVICE_DEF(0x00C7, "52832", "QFAA", "B0", 512),
- NRF5_DEVICE_DEF(0x0139, "52832", "QFAA", "E0", 512),
- NRF5_DEVICE_DEF(0x00E3, "52832", "CIAA", "B0", 512),
-
- /* nRF52840 Devices */
- NRF5_DEVICE_DEF(0x0150, "52840", "QIAA", "C0", 1024),
+ NRF51_DEVICE_DEF(0x0073, "51422", "QFAA", "F0", 256),
+ NRF51_DEVICE_DEF(0x007C, "51422", "QFAB", "B0", 128),
+ NRF51_DEVICE_DEF(0x0085, "51422", "QFAC", "A0", 256),
+ NRF51_DEVICE_DEF(0x0086, "51422", "QFAC", "A1", 256),
+ NRF51_DEVICE_DEF(0x007E, "51422", "CDAB", "A0", 128),
+ NRF51_DEVICE_DEF(0x007A, "51422", "CEAA", "C0", 256),
+ NRF51_DEVICE_DEF(0x0088, "51422", "CFAC", "A0", 256),
+
+ /* The driver fully autodetects nRF52 series devices by FICR INFO,
+ * no need for nRF52xxx HWIDs in this table */
};
-static int nrf5_bank_is_probed(struct flash_bank *bank)
-{
- struct nrf5_bank *nbank = bank->driver_priv;
+struct nrf5_device_package {
+ uint32_t package;
+ const char *code;
+};
- assert(nbank != NULL);
+/* Newer devices have FICR INFO.PACKAGE.
+ * This table converts its value to two character code */
+static const struct nrf5_device_package nrf52_packages_table[] = {
+ { 0x2000, "QF" },
+ { 0x2001, "CH" },
+ { 0x2002, "CI" },
+ { 0x2003, "QC" },
+ { 0x2004, "QI/CA" }, /* differs nRF52805, 810, 811: CA, nRF52833, 840: QI */
+ { 0x2005, "CK" },
+ { 0x2007, "QD" },
+ { 0x2008, "CJ" },
+ { 0x2009, "CF" },
+};
- return nbank->probed;
-}
-static int nrf5_probe(struct flash_bank *bank);
+const struct flash_driver nrf5_flash, nrf51_flash;
-static int nrf5_get_probed_chip_if_halted(struct flash_bank *bank, struct nrf5_info **chip)
+static bool nrf5_bank_is_probed(const struct flash_bank *bank)
{
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
struct nrf5_bank *nbank = bank->driver_priv;
- *chip = nbank->chip;
+ assert(nbank);
- int probed = nrf5_bank_is_probed(bank);
- if (probed < 0)
- return probed;
- else if (!probed)
- return nrf5_probe(bank);
- else
- return ERROR_OK;
+ return nbank->probed;
}
static int nrf5_wait_for_nvmc(struct nrf5_info *chip)
do {
res = target_read_u32(chip->target, NRF5_NVMC_READY, &ready);
if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read NVMC_READY register");
+ LOG_ERROR("Error waiting NVMC_READY: generic flash write/erase error (check protection etc...)");
return res;
}
return ERROR_FAIL;
}
-static int nrf5_protect_check(struct flash_bank *bank)
+static int nrf5_protect_check_clenr0(struct flash_bank *bank)
{
int res;
uint32_t clenr0;
- /* UICR cannot be write protected so just return early */
- if (bank->base == NRF5_UICR_BASE)
- return ERROR_OK;
-
struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
struct nrf5_info *chip = nbank->chip;
+ assert(chip);
- assert(chip != NULL);
-
- res = target_read_u32(chip->target, NRF5_FICR_CLENR0,
+ res = target_read_u32(chip->target, NRF51_FICR_CLENR0,
&clenr0);
if (res != ERROR_OK) {
LOG_ERROR("Couldn't read code region 0 size[FICR]");
}
if (clenr0 == 0xFFFFFFFF) {
- res = target_read_u32(chip->target, NRF5_UICR_CLENR0,
+ res = target_read_u32(chip->target, NRF51_UICR_CLENR0,
&clenr0);
if (res != ERROR_OK) {
LOG_ERROR("Couldn't read code region 0 size[UICR]");
}
}
- for (int i = 0; i < bank->num_sectors; i++)
+ for (unsigned int i = 0; i < bank->num_sectors; i++)
bank->sectors[i].is_protected =
clenr0 != 0xFFFFFFFF && bank->sectors[i].offset < clenr0;
return ERROR_OK;
}
-static int nrf5_protect(struct flash_bank *bank, int set, int first, int last)
+static int nrf5_protect_check_bprot(struct flash_bank *bank)
{
+ struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ struct nrf5_info *chip = nbank->chip;
+ assert(chip);
+
+ static uint32_t nrf5_bprot_offsets[4] = { 0x600, 0x604, 0x610, 0x614 };
+ uint32_t bprot_reg = 0;
int res;
- uint32_t clenr0, ppfc;
- struct nrf5_info *chip;
- /* UICR cannot be write protected so just bail out early */
+ for (unsigned int i = 0; i < bank->num_sectors; i++) {
+ unsigned int bit = i % 32;
+ if (bit == 0) {
+ unsigned int n_reg = i / 32;
+ if (n_reg >= ARRAY_SIZE(nrf5_bprot_offsets))
+ break;
+
+ res = target_read_u32(chip->target, NRF5_BPROT_BASE + nrf5_bprot_offsets[n_reg], &bprot_reg);
+ if (res != ERROR_OK)
+ return res;
+ }
+ bank->sectors[i].is_protected = (bprot_reg & (1 << bit)) ? 1 : 0;
+ }
+ return ERROR_OK;
+}
+
+static int nrf5_protect_check(struct flash_bank *bank)
+{
+ /* UICR cannot be write protected so just return early */
if (bank->base == NRF5_UICR_BASE)
- return ERROR_FAIL;
+ return ERROR_OK;
- res = nrf5_get_probed_chip_if_halted(bank, &chip);
- if (res != ERROR_OK)
- return res;
+ struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ struct nrf5_info *chip = nbank->chip;
+ assert(chip);
+
+ if (chip->features & NRF5_FEATURE_BPROT)
+ return nrf5_protect_check_bprot(bank);
+
+ if (chip->features & NRF5_FEATURE_SERIES_51)
+ return nrf5_protect_check_clenr0(bank);
+
+ LOG_WARNING("Flash protection of this nRF device is not supported");
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+}
+
+static int nrf5_protect_clenr0(struct flash_bank *bank, int set, unsigned int first,
+ unsigned int last)
+{
+ int res;
+ uint32_t clenr0, ppfc;
+
+ struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ struct nrf5_info *chip = nbank->chip;
+ assert(chip);
if (first != 0) {
- LOG_ERROR("Code region 0 must start at the begining of the bank");
+ LOG_ERROR("Code region 0 must start at the beginning of the bank");
return ERROR_FAIL;
}
- res = target_read_u32(chip->target, NRF5_FICR_PPFC,
+ res = target_read_u32(chip->target, NRF51_FICR_PPFC,
&ppfc);
if (res != ERROR_OK) {
LOG_ERROR("Couldn't read PPFC register");
return ERROR_FAIL;
}
- res = target_read_u32(chip->target, NRF5_UICR_CLENR0,
+ res = target_read_u32(chip->target, NRF51_UICR_CLENR0,
&clenr0);
if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read code region 0 size[UICR]");
+ LOG_ERROR("Couldn't read code region 0 size from UICR");
return res;
}
- if (clenr0 == 0xFFFFFFFF) {
- res = target_write_u32(chip->target, NRF5_UICR_CLENR0,
- clenr0);
- if (res != ERROR_OK) {
- LOG_ERROR("Couldn't write code region 0 size[UICR]");
- return res;
- }
+ if (!set || clenr0 != 0xFFFFFFFF) {
+ LOG_ERROR("You need to perform chip erase before changing the protection settings");
+ return ERROR_FAIL;
+ }
+
+ res = nrf5_nvmc_write_enable(chip);
+ if (res != ERROR_OK)
+ goto error;
+
+ clenr0 = bank->sectors[last].offset + bank->sectors[last].size;
+ res = target_write_u32(chip->target, NRF51_UICR_CLENR0, clenr0);
+
+ int res2 = nrf5_wait_for_nvmc(chip);
+
+ if (res == ERROR_OK)
+ res = res2;
+ if (res == ERROR_OK)
+ LOG_INFO("A reset or power cycle is required for the new protection settings to take effect.");
+ else
+ LOG_ERROR("Couldn't write code region 0 size to UICR");
+
+error:
+ nrf5_nvmc_read_only(chip);
+
+ return res;
+}
+
+static int nrf5_protect(struct flash_bank *bank, int set, unsigned int first,
+ unsigned int last)
+{
+ /* UICR cannot be write protected so just bail out early */
+ if (bank->base == NRF5_UICR_BASE) {
+ LOG_ERROR("UICR page does not support protection");
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+ }
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ struct nrf5_info *chip = nbank->chip;
+ assert(chip);
+
+ if (chip->features & NRF5_FEATURE_SERIES_51)
+ return nrf5_protect_clenr0(bank, set, first, last);
+
+ LOG_ERROR("Flash protection setting is not supported on this nRF5 device");
+ return ERROR_FLASH_OPER_UNSUPPORTED;
+}
+
+static bool nrf5_info_variant_to_str(uint32_t variant, char *bf)
+{
+ uint8_t b[4];
+
+ h_u32_to_be(b, variant);
+ if (isalnum(b[0]) && isalnum(b[1]) && isalnum(b[2]) && isalnum(b[3])) {
+ memcpy(bf, b, 4);
+ bf[4] = 0;
+ return true;
+ }
+
+ strcpy(bf, "xxxx");
+ return false;
+}
+
+static const char *nrf5_decode_info_package(uint32_t package)
+{
+ for (size_t i = 0; i < ARRAY_SIZE(nrf52_packages_table); i++) {
+ if (nrf52_packages_table[i].package == package)
+ return nrf52_packages_table[i].code;
+ }
+ return "xx";
+}
+
+static int get_nrf5_chip_type_str(const struct nrf5_info *chip, char *buf, unsigned int buf_size)
+{
+ int res;
+ if (chip->spec) {
+ res = snprintf(buf, buf_size, "nRF%s-%s(build code: %s)",
+ chip->spec->part, chip->spec->variant, chip->spec->build_code);
+ } else if (chip->ficr_info_valid) {
+ char variant[5];
+ nrf5_info_variant_to_str(chip->ficr_info.variant, variant);
+ res = snprintf(buf, buf_size, "nRF%" PRIx32 "-%s%.2s(build code: %s)",
+ chip->ficr_info.part,
+ nrf5_decode_info_package(chip->ficr_info.package),
+ variant, &variant[2]);
} else {
- LOG_ERROR("You need to perform chip erase before changing the protection settings");
+ res = snprintf(buf, buf_size, "nRF51xxx (HWID 0x%04" PRIx16 ")", chip->hwid);
}
- nrf5_protect_check(bank);
+ /* safety: */
+ if (res <= 0 || (unsigned int)res >= buf_size) {
+ LOG_ERROR("BUG: buffer problem in %s", __func__);
+ return ERROR_FAIL;
+ }
+ return ERROR_OK;
+}
+
+static int nrf5_info(struct flash_bank *bank, struct command_invocation *cmd)
+{
+ struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ struct nrf5_info *chip = nbank->chip;
+ assert(chip);
+
+ char chip_type_str[256];
+ if (get_nrf5_chip_type_str(chip, chip_type_str, sizeof(chip_type_str)) != ERROR_OK)
+ return ERROR_FAIL;
+ command_print_sameline(cmd, "%s %ukB Flash, %ukB RAM",
+ chip_type_str, chip->flash_size_kb, chip->ram_size_kb);
return ERROR_OK;
}
+static int nrf5_read_ficr_info(struct nrf5_info *chip)
+{
+ int res;
+ struct target *target = chip->target;
+
+ chip->ficr_info_valid = false;
+
+ res = target_read_u32(target, NRF5_FICR_INFO_PART, &chip->ficr_info.part);
+ if (res != ERROR_OK) {
+ LOG_DEBUG("Couldn't read FICR INFO.PART register");
+ return res;
+ }
+
+ uint32_t series = chip->ficr_info.part & 0xfffff000;
+ switch (series) {
+ case 0x51000:
+ chip->features = NRF5_FEATURE_SERIES_51;
+ break;
+
+ case 0x52000:
+ chip->features = NRF5_FEATURE_SERIES_52;
+
+ switch (chip->ficr_info.part) {
+ case 0x52805:
+ case 0x52810:
+ case 0x52811:
+ case 0x52832:
+ chip->features |= NRF5_FEATURE_BPROT;
+ break;
+
+ case 0x52820:
+ case 0x52833:
+ case 0x52840:
+ chip->features |= NRF5_FEATURE_ACL_PROT;
+ break;
+ }
+ break;
+
+ default:
+ LOG_DEBUG("FICR INFO likely not implemented. Invalid PART value 0x%08"
+ PRIx32, chip->ficr_info.part);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ /* Now we know the device has FICR INFO filled by something relevant:
+ * Although it is not documented, the tested nRF51 rev 3 devices
+ * have FICR INFO.PART, RAM and FLASH of the same format as nRF52.
+ * VARIANT and PACKAGE coding is unknown for a nRF51 device.
+ * nRF52 devices have FICR INFO documented and always filled. */
+
+ res = target_read_u32(target, NRF5_FICR_INFO_VARIANT, &chip->ficr_info.variant);
+ if (res != ERROR_OK)
+ return res;
+
+ res = target_read_u32(target, NRF5_FICR_INFO_PACKAGE, &chip->ficr_info.package);
+ if (res != ERROR_OK)
+ return res;
+
+ res = target_read_u32(target, NRF5_FICR_INFO_RAM, &chip->ficr_info.ram);
+ if (res != ERROR_OK)
+ return res;
+
+ res = target_read_u32(target, NRF5_FICR_INFO_FLASH, &chip->ficr_info.flash);
+ if (res != ERROR_OK)
+ return res;
+
+ chip->ficr_info_valid = true;
+ return ERROR_OK;
+}
+
+static int nrf5_get_ram_size(struct target *target, uint32_t *ram_size)
+{
+ int res;
+
+ *ram_size = 0;
+
+ uint32_t numramblock;
+ res = target_read_u32(target, NRF51_FICR_NUMRAMBLOCK, &numramblock);
+ if (res != ERROR_OK) {
+ LOG_DEBUG("Couldn't read FICR NUMRAMBLOCK register");
+ return res;
+ }
+
+ if (numramblock < 1 || numramblock > 4) {
+ LOG_DEBUG("FICR NUMRAMBLOCK strange value %" PRIx32, numramblock);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ for (unsigned int i = 0; i < numramblock; i++) {
+ uint32_t sizeramblock;
+ res = target_read_u32(target, NRF51_FICR_SIZERAMBLOCK0 + sizeof(uint32_t)*i, &sizeramblock);
+ if (res != ERROR_OK) {
+ LOG_DEBUG("Couldn't read FICR NUMRAMBLOCK register");
+ return res;
+ }
+ if (sizeramblock < 1024 || sizeramblock > 65536)
+ LOG_DEBUG("FICR SIZERAMBLOCK strange value %" PRIx32, sizeramblock);
+ else
+ *ram_size += sizeramblock;
+ }
+ return res;
+}
+
static int nrf5_probe(struct flash_bank *bank)
{
- uint32_t hwid;
int res;
+
struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
struct nrf5_info *chip = nbank->chip;
+ assert(chip);
+ struct target *target = chip->target;
- res = target_read_u32(chip->target, NRF5_FICR_CONFIGID, &hwid);
+ uint32_t configid;
+ res = target_read_u32(target, NRF5_FICR_CONFIGID, &configid);
if (res != ERROR_OK) {
LOG_ERROR("Couldn't read CONFIGID register");
return res;
}
- hwid &= 0xFFFF; /* HWID is stored in the lower two
- * bytes of the CONFIGID register */
+ /* HWID is stored in the lower two bytes of the CONFIGID register */
+ chip->hwid = configid & 0xFFFF;
+
+ /* guess a nRF51 series if the device has no FICR INFO and we don't know HWID */
+ chip->features = NRF5_FEATURE_SERIES_51;
- const struct nrf5_device_spec *spec = NULL;
+ /* Don't bail out on error for the case that some old engineering
+ * sample has FICR INFO registers unreadable. We can proceed anyway. */
+ (void)nrf5_read_ficr_info(chip);
+
+ chip->spec = NULL;
for (size_t i = 0; i < ARRAY_SIZE(nrf5_known_devices_table); i++) {
- if (hwid == nrf5_known_devices_table[i].hwid) {
- spec = &nrf5_known_devices_table[i];
+ if (chip->hwid == nrf5_known_devices_table[i].hwid) {
+ chip->spec = &nrf5_known_devices_table[i];
+ chip->features = chip->spec->features;
break;
}
}
- if (!chip->bank[0].probed && !chip->bank[1].probed) {
- if (spec)
- LOG_INFO("nRF%s-%s(build code: %s) %ukB Flash",
- spec->part, spec->variant, spec->build_code,
- spec->flash_size_kb);
- else
- LOG_WARNING("Unknown device (HWID 0x%08" PRIx32 ")", hwid);
+ if (chip->spec && chip->ficr_info_valid) {
+ /* check if HWID table gives the same part as FICR INFO */
+ if (chip->ficr_info.part != strtoul(chip->spec->part, NULL, 16))
+ LOG_WARNING("HWID 0x%04" PRIx32 " mismatch: FICR INFO.PART %"
+ PRIx32, chip->hwid, chip->ficr_info.part);
}
- if (bank->base == NRF5_FLASH_BASE) {
- /* The value stored in NRF5_FICR_CODEPAGESIZE is the number of bytes in one page of FLASH. */
- res = target_read_u32(chip->target, NRF5_FICR_CODEPAGESIZE,
- &chip->code_page_size);
- if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read code page size");
- return res;
- }
+ if (chip->ficr_info_valid) {
+ chip->ram_size_kb = chip->ficr_info.ram;
+ } else {
+ uint32_t ram_size;
+ nrf5_get_ram_size(target, &ram_size);
+ chip->ram_size_kb = ram_size / 1024;
+ }
- /* Note the register name is misleading,
- * NRF5_FICR_CODESIZE is the number of pages in flash memory, not the number of bytes! */
- uint32_t num_sectors;
- res = target_read_u32(chip->target, NRF5_FICR_CODESIZE, &num_sectors);
- if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read code memory size");
- return res;
- }
+ /* The value stored in NRF5_FICR_CODEPAGESIZE is the number of bytes in one page of FLASH. */
+ uint32_t flash_page_size;
+ res = target_read_u32(chip->target, NRF5_FICR_CODEPAGESIZE,
+ &flash_page_size);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't read code page size");
+ return res;
+ }
- bank->num_sectors = num_sectors;
- bank->size = num_sectors * chip->code_page_size;
+ /* Note the register name is misleading,
+ * NRF5_FICR_CODESIZE is the number of pages in flash memory, not the number of bytes! */
+ uint32_t num_sectors;
+ res = target_read_u32(chip->target, NRF5_FICR_CODESIZE, &num_sectors);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't read code memory size");
+ return res;
+ }
- if (spec && bank->size / 1024 != spec->flash_size_kb)
- LOG_WARNING("Chip's reported Flash capacity does not match expected one");
+ chip->flash_size_kb = num_sectors * flash_page_size / 1024;
- bank->sectors = calloc(bank->num_sectors,
- sizeof((bank->sectors)[0]));
- if (!bank->sectors)
- return ERROR_FLASH_BANK_NOT_PROBED;
+ if (!chip->bank[0].probed && !chip->bank[1].probed) {
+ char chip_type_str[256];
+ if (get_nrf5_chip_type_str(chip, chip_type_str, sizeof(chip_type_str)) != ERROR_OK)
+ return ERROR_FAIL;
+ const bool device_is_unknown = (!chip->spec && !chip->ficr_info_valid);
+ LOG_INFO("%s%s %ukB Flash, %ukB RAM",
+ device_is_unknown ? "Unknown device: " : "",
+ chip_type_str,
+ chip->flash_size_kb,
+ chip->ram_size_kb);
+ }
- /* Fill out the sector information: all NRF5 sectors are the same size and
- * there is always a fixed number of them. */
- for (int i = 0; i < bank->num_sectors; i++) {
- bank->sectors[i].size = chip->code_page_size;
- bank->sectors[i].offset = i * chip->code_page_size;
+ free(bank->sectors);
- /* mark as unknown */
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = -1;
- }
+ if (bank->base == NRF5_FLASH_BASE) {
+ /* Sanity check */
+ if (chip->spec && chip->flash_size_kb != chip->spec->flash_size_kb)
+ LOG_WARNING("Chip's reported Flash capacity does not match expected one");
+ if (chip->ficr_info_valid && chip->flash_size_kb != chip->ficr_info.flash)
+ LOG_WARNING("Chip's reported Flash capacity does not match FICR INFO.FLASH");
+
+ bank->num_sectors = num_sectors;
+ bank->size = num_sectors * flash_page_size;
- nrf5_protect_check(bank);
+ bank->sectors = alloc_block_array(0, flash_page_size, num_sectors);
+ if (!bank->sectors)
+ return ERROR_FAIL;
chip->bank[0].probed = true;
+
} else {
- bank->size = NRF5_UICR_SIZE;
bank->num_sectors = 1;
- bank->sectors = calloc(bank->num_sectors,
- sizeof((bank->sectors)[0]));
- if (!bank->sectors)
- return ERROR_FLASH_BANK_NOT_PROBED;
+ bank->size = flash_page_size;
- bank->sectors[0].size = bank->size;
- bank->sectors[0].offset = 0;
+ bank->sectors = alloc_block_array(0, flash_page_size, num_sectors);
+ if (!bank->sectors)
+ return ERROR_FAIL;
- bank->sectors[0].is_erased = 0;
bank->sectors[0].is_protected = 0;
chip->bank[1].probed = true;
static int nrf5_auto_probe(struct flash_bank *bank)
{
- int probed = nrf5_bank_is_probed(bank);
-
- if (probed < 0)
- return probed;
- else if (probed)
+ if (nrf5_bank_is_probed(bank))
return ERROR_OK;
- else
- return nrf5_probe(bank);
+
+ return nrf5_probe(bank);
}
static int nrf5_erase_all(struct nrf5_info *chip)
int res;
LOG_DEBUG("Erasing page at 0x%"PRIx32, sector->offset);
- if (sector->is_protected) {
- LOG_ERROR("Cannot erase protected sector at 0x%" PRIx32, sector->offset);
- return ERROR_FAIL;
- }
if (bank->base == NRF5_UICR_BASE) {
- uint32_t ppfc;
- res = target_read_u32(chip->target, NRF5_FICR_PPFC,
+ if (chip->features & NRF5_FEATURE_SERIES_51) {
+ uint32_t ppfc;
+ res = target_read_u32(chip->target, NRF51_FICR_PPFC,
&ppfc);
- if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read PPFC register");
- return res;
- }
-
- if ((ppfc & 0xFF) == 0xFF) {
- /* We can't erase the UICR. Double-check to
- see if it's already erased before complaining. */
- default_flash_blank_check(bank);
- if (sector->is_erased == 1)
- return ERROR_OK;
-
- LOG_ERROR("The chip was not pre-programmed with SoftDevice stack and UICR cannot be erased separately. Please issue mass erase before trying to write to this region");
- return ERROR_FAIL;
+ if (res != ERROR_OK) {
+ LOG_ERROR("Couldn't read PPFC register");
+ return res;
+ }
+
+ if ((ppfc & 0xFF) == 0xFF) {
+ /* We can't erase the UICR. Double-check to
+ see if it's already erased before complaining. */
+ default_flash_blank_check(bank);
+ if (sector->is_erased == 1)
+ return ERROR_OK;
+
+ LOG_ERROR("The chip was not pre-programmed with SoftDevice stack and UICR cannot be erased separately. Please issue mass erase before trying to write to this region");
+ return ERROR_FAIL;
+ }
}
res = nrf5_nvmc_generic_erase(chip,
return res;
}
-static const uint8_t nrf5_flash_write_code[] = {
- /* See contrib/loaders/flash/cortex-m0.S */
-/* <wait_fifo>: */
- 0x0d, 0x68, /* ldr r5, [r1, #0] */
- 0x00, 0x2d, /* cmp r5, #0 */
- 0x0b, 0xd0, /* beq.n 1e <exit> */
- 0x4c, 0x68, /* ldr r4, [r1, #4] */
- 0xac, 0x42, /* cmp r4, r5 */
- 0xf9, 0xd0, /* beq.n 0 <wait_fifo> */
- 0x20, 0xcc, /* ldmia r4!, {r5} */
- 0x20, 0xc3, /* stmia r3!, {r5} */
- 0x94, 0x42, /* cmp r4, r2 */
- 0x01, 0xd3, /* bcc.n 18 <no_wrap> */
- 0x0c, 0x46, /* mov r4, r1 */
- 0x08, 0x34, /* adds r4, #8 */
-/* <no_wrap>: */
- 0x4c, 0x60, /* str r4, [r1, #4] */
- 0x04, 0x38, /* subs r0, #4 */
- 0xf0, 0xd1, /* bne.n 0 <wait_fifo> */
-/* <exit>: */
- 0x00, 0xbe /* bkpt 0x0000 */
-};
-
-
/* Start a low level flash write for the specified region */
-static int nrf5_ll_flash_write(struct nrf5_info *chip, uint32_t offset, const uint8_t *buffer, uint32_t bytes)
+static int nrf5_ll_flash_write(struct nrf5_info *chip, uint32_t address, const uint8_t *buffer, uint32_t bytes)
{
struct target *target = chip->target;
uint32_t buffer_size = 8192;
struct working_area *write_algorithm;
struct working_area *source;
- uint32_t address = NRF5_FLASH_BASE + offset;
- struct reg_param reg_params[4];
+ struct reg_param reg_params[6];
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
+ static const uint8_t nrf5_flash_write_code[] = {
+#include "../../../contrib/loaders/flash/nrf5/nrf5.inc"
+ };
- LOG_DEBUG("Writing buffer to flash offset=0x%"PRIx32" bytes=0x%"PRIx32, offset, bytes);
+ LOG_DEBUG("Writing buffer to flash address=0x%"PRIx32" bytes=0x%"PRIx32, address, bytes);
assert(bytes % 4 == 0);
/* allocate working area with flash programming code */
LOG_WARNING("no working area available, falling back to slow memory writes");
for (; bytes > 0; bytes -= 4) {
- retval = target_write_memory(chip->target, offset, 4, 1, buffer);
+ retval = target_write_memory(target, address, 4, 1, buffer);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
- offset += 4;
+ address += 4;
buffer += 4;
}
return ERROR_OK;
}
- LOG_WARNING("using fast async flash loader. This is currently supported");
- LOG_WARNING("only with ST-Link and CMSIS-DAP. If you have issues, add");
- LOG_WARNING("\"set WORKAREASIZE 0\" before sourcing nrf51.cfg/nrf52.cfg to disable it");
-
retval = target_write_buffer(target, write_algorithm->address,
sizeof(nrf5_flash_write_code),
nrf5_flash_write_code);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer start */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* buffer end */
init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); /* target address */
+ init_reg_param(®_params[4], "r6", 32, PARAM_OUT); /* watchdog refresh value */
+ init_reg_param(®_params[5], "r7", 32, PARAM_OUT); /* watchdog refresh register address */
buf_set_u32(reg_params[0].value, 0, 32, bytes);
buf_set_u32(reg_params[1].value, 0, 32, source->address);
buf_set_u32(reg_params[2].value, 0, 32, source->address + source->size);
buf_set_u32(reg_params[3].value, 0, 32, address);
+ buf_set_u32(reg_params[4].value, 0, 32, WATCHDOG_REFRESH_VALUE);
+ buf_set_u32(reg_params[5].value, 0, 32, WATCHDOG_REFRESH_REGISTER);
retval = target_run_flash_async_algorithm(target, buffer, bytes/4, 4,
0, NULL,
- 4, reg_params,
+ ARRAY_SIZE(reg_params), reg_params,
source->address, source->size,
- write_algorithm->address, 0,
+ write_algorithm->address, write_algorithm->address + sizeof(nrf5_flash_write_code) - 2,
&armv7m_info);
target_free_working_area(target, source);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
+ destroy_reg_param(®_params[4]);
+ destroy_reg_param(®_params[5]);
return retval;
}
-/* Check and erase flash sectors in specified range then start a low level page write.
- start/end must be sector aligned.
-*/
-static int nrf5_write_pages(struct flash_bank *bank, uint32_t start, uint32_t end, const uint8_t *buffer)
+static int nrf5_write(struct flash_bank *bank, const uint8_t *buffer,
+ uint32_t offset, uint32_t count)
{
- int res = ERROR_FAIL;
+ int res;
+
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
struct nrf5_info *chip = nbank->chip;
+ assert(chip);
+
+ assert(offset % 4 == 0);
+ assert(count % 4 == 0);
+
+ /* UICR CLENR0 based protection used on nRF51 is somewhat clumsy:
+ * RM reads: Code running from code region 1 will not be able to write
+ * to code region 0.
+ * Unfortunately the flash loader running from RAM can write to both
+ * code regions without any hint the protection is violated.
+ *
+ * Update protection state and check if any flash sector to be written
+ * is protected. */
+ if (chip->features & NRF5_FEATURE_SERIES_51) {
+
+ res = nrf5_protect_check_clenr0(bank);
+ if (res != ERROR_OK)
+ return res;
- assert(start % chip->code_page_size == 0);
- assert(end % chip->code_page_size == 0);
+ for (unsigned int sector = 0; sector < bank->num_sectors; sector++) {
+ struct flash_sector *bs = &bank->sectors[sector];
+
+ /* Start offset in or before this sector? */
+ /* End offset in or behind this sector? */
+ if ((offset < (bs->offset + bs->size))
+ && ((offset + count - 1) >= bs->offset)
+ && bs->is_protected == 1) {
+ LOG_ERROR("Write refused, sector %d is protected", sector);
+ return ERROR_FLASH_PROTECTED;
+ }
+ }
+ }
res = nrf5_nvmc_write_enable(chip);
if (res != ERROR_OK)
goto error;
- res = nrf5_ll_flash_write(chip, start, buffer, (end - start));
+ res = nrf5_ll_flash_write(chip, bank->base + offset, buffer, count);
if (res != ERROR_OK)
goto error;
return res;
}
-static int nrf5_erase(struct flash_bank *bank, int first, int last)
+static int nrf5_erase(struct flash_bank *bank, unsigned int first,
+ unsigned int last)
{
int res;
- struct nrf5_info *chip;
-
- res = nrf5_get_probed_chip_if_halted(bank, &chip);
- if (res != ERROR_OK)
- return res;
-
- /* For each sector to be erased */
- for (int s = first; s <= last && res == ERROR_OK; s++)
- res = nrf5_erase_page(bank, chip, &bank->sectors[s]);
- return res;
-}
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
-static int nrf5_code_flash_write(struct flash_bank *bank,
- struct nrf5_info *chip,
- const uint8_t *buffer, uint32_t offset, uint32_t count)
-{
+ struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ struct nrf5_info *chip = nbank->chip;
+ assert(chip);
- int res;
- /* Need to perform reads to fill any gaps we need to preserve in the first page,
- before the start of buffer, or in the last page, after the end of buffer */
- uint32_t first_page = offset/chip->code_page_size;
- uint32_t last_page = DIV_ROUND_UP(offset+count, chip->code_page_size);
-
- uint32_t first_page_offset = first_page * chip->code_page_size;
- uint32_t last_page_offset = last_page * chip->code_page_size;
-
- LOG_DEBUG("Padding write from 0x%08"PRIx32"-0x%08"PRIx32" as 0x%08"PRIx32"-0x%08"PRIx32,
- offset, offset+count, first_page_offset, last_page_offset);
-
- uint32_t page_cnt = last_page - first_page;
- uint8_t buffer_to_flash[page_cnt*chip->code_page_size];
-
- /* Fill in any space between start of first page and start of buffer */
- uint32_t pre = offset - first_page_offset;
- if (pre > 0) {
- res = target_read_memory(bank->target,
- first_page_offset,
- 1,
- pre,
- buffer_to_flash);
- if (res != ERROR_OK)
- return res;
- }
+ /* UICR CLENR0 based protection used on nRF51 prevents erase
+ * absolutely silently. NVMC has no flag to indicate the protection
+ * was violated.
+ *
+ * Update protection state and check if any flash sector to be erased
+ * is protected. */
+ if (chip->features & NRF5_FEATURE_SERIES_51) {
- /* Fill in main contents of buffer */
- memcpy(buffer_to_flash+pre, buffer, count);
-
- /* Fill in any space between end of buffer and end of last page */
- uint32_t post = last_page_offset - (offset+count);
- if (post > 0) {
- /* Retrieve the full row contents from Flash */
- res = target_read_memory(bank->target,
- offset + count,
- 1,
- post,
- buffer_to_flash+pre+count);
+ res = nrf5_protect_check_clenr0(bank);
if (res != ERROR_OK)
return res;
}
- return nrf5_write_pages(bank, first_page_offset, last_page_offset, buffer_to_flash);
-}
-
-static int nrf5_uicr_flash_write(struct flash_bank *bank,
- struct nrf5_info *chip,
- const uint8_t *buffer, uint32_t offset, uint32_t count)
-{
- int res;
- uint8_t uicr[NRF5_UICR_SIZE];
- struct flash_sector *sector = &bank->sectors[0];
-
- if ((offset + count) > NRF5_UICR_SIZE)
- return ERROR_FAIL;
-
- res = target_read_memory(bank->target,
- NRF5_UICR_BASE,
- 1,
- NRF5_UICR_SIZE,
- uicr);
-
- if (res != ERROR_OK)
- return res;
-
- res = nrf5_erase_page(bank, chip, sector);
- if (res != ERROR_OK)
- return res;
-
- res = nrf5_nvmc_write_enable(chip);
- if (res != ERROR_OK)
- return res;
+ /* For each sector to be erased */
+ for (unsigned int s = first; s <= last; s++) {
- memcpy(&uicr[offset], buffer, count);
+ if (chip->features & NRF5_FEATURE_SERIES_51
+ && bank->sectors[s].is_protected == 1) {
+ LOG_ERROR("Flash sector %d is protected", s);
+ return ERROR_FLASH_PROTECTED;
+ }
- res = nrf5_ll_flash_write(chip, NRF5_UICR_BASE, uicr, NRF5_UICR_SIZE);
- if (res != ERROR_OK) {
- nrf5_nvmc_read_only(chip);
- return res;
+ res = nrf5_erase_page(bank, chip, &bank->sectors[s]);
+ if (res != ERROR_OK) {
+ LOG_ERROR("Error erasing sector %d", s);
+ return res;
+ }
}
- return nrf5_nvmc_read_only(chip);
-}
-
-
-static int nrf5_write(struct flash_bank *bank, const uint8_t *buffer,
- uint32_t offset, uint32_t count)
-{
- int res;
- struct nrf5_bank *nbank = bank->driver_priv;
- struct nrf5_info *chip;
-
- res = nrf5_get_probed_chip_if_halted(bank, &chip);
- if (res != ERROR_OK)
- return res;
-
- return nbank->write(bank, chip, buffer, offset, count);
+ return ERROR_OK;
}
static void nrf5_free_driver_priv(struct flash_bank *bank)
{
struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
struct nrf5_info *chip = nbank->chip;
- if (chip == NULL)
+ if (!chip)
return;
chip->refcount--;
}
}
+static struct nrf5_info *nrf5_get_chip(struct target *target)
+{
+ struct flash_bank *bank_iter;
+
+ /* iterate over nrf5 banks of same target */
+ for (bank_iter = flash_bank_list(); bank_iter; bank_iter = bank_iter->next) {
+ if (bank_iter->driver != &nrf5_flash && bank_iter->driver != &nrf51_flash)
+ continue;
+
+ if (bank_iter->target != target)
+ continue;
+
+ struct nrf5_bank *nbank = bank_iter->driver_priv;
+ if (!nbank)
+ continue;
+
+ if (nbank->chip)
+ return nbank->chip;
+ }
+ return NULL;
+}
+
FLASH_BANK_COMMAND_HANDLER(nrf5_flash_bank_command)
{
- static struct nrf5_info *chip;
+ struct nrf5_info *chip;
struct nrf5_bank *nbank = NULL;
+ if (bank->driver == &nrf51_flash)
+ LOG_WARNING("Flash driver 'nrf51' is deprecated! Use 'nrf5' instead.");
+
switch (bank->base) {
case NRF5_FLASH_BASE:
case NRF5_UICR_BASE:
return ERROR_FAIL;
}
+ chip = nrf5_get_chip(bank->target);
if (!chip) {
/* Create a new chip */
chip = calloc(1, sizeof(*chip));
switch (bank->base) {
case NRF5_FLASH_BASE:
nbank = &chip->bank[0];
- nbank->write = nrf5_code_flash_write;
break;
case NRF5_UICR_BASE:
nbank = &chip->bank[1];
- nbank->write = nrf5_uicr_flash_write;
break;
}
- assert(nbank != NULL);
+ assert(nbank);
chip->refcount++;
nbank->chip = chip;
nbank->probed = false;
bank->driver_priv = nbank;
+ bank->write_start_alignment = bank->write_end_alignment = 4;
return ERROR_OK;
}
if (res != ERROR_OK)
return res;
- assert(bank != NULL);
-
- struct nrf5_info *chip;
-
- res = nrf5_get_probed_chip_if_halted(bank, &chip);
- if (res != ERROR_OK)
- return res;
-
- uint32_t ppfc;
+ assert(bank);
- res = target_read_u32(target, NRF5_FICR_PPFC,
- &ppfc);
- if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read PPFC register");
- return res;
- }
-
- if ((ppfc & 0xFF) == 0x00) {
- LOG_ERROR("Code region 0 size was pre-programmed at the factory, "
- "mass erase command won't work.");
- return ERROR_FAIL;
- }
-
- res = nrf5_erase_all(chip);
- if (res != ERROR_OK) {
- LOG_ERROR("Failed to erase the chip");
- nrf5_protect_check(bank);
- return res;
- }
-
- res = nrf5_protect_check(bank);
- if (res != ERROR_OK) {
- LOG_ERROR("Failed to check chip's write protection");
- return res;
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
}
- res = get_flash_bank_by_addr(target, NRF5_UICR_BASE, true, &bank);
- if (res != ERROR_OK)
- return res;
-
- return ERROR_OK;
-}
-
-static int nrf5_info(struct flash_bank *bank, char *buf, int buf_size)
-{
- int res;
-
- struct nrf5_info *chip;
-
- res = nrf5_get_probed_chip_if_halted(bank, &chip);
- if (res != ERROR_OK)
- return res;
-
- static struct {
- const uint32_t address;
- uint32_t value;
- } ficr[] = {
- { .address = NRF5_FICR_CODEPAGESIZE },
- { .address = NRF5_FICR_CODESIZE },
- { .address = NRF5_FICR_CLENR0 },
- { .address = NRF5_FICR_PPFC },
- { .address = NRF5_FICR_NUMRAMBLOCK },
- { .address = NRF5_FICR_SIZERAMBLOCK0 },
- { .address = NRF5_FICR_SIZERAMBLOCK1 },
- { .address = NRF5_FICR_SIZERAMBLOCK2 },
- { .address = NRF5_FICR_SIZERAMBLOCK3 },
- { .address = NRF5_FICR_CONFIGID },
- { .address = NRF5_FICR_DEVICEID0 },
- { .address = NRF5_FICR_DEVICEID1 },
- { .address = NRF5_FICR_ER0 },
- { .address = NRF5_FICR_ER1 },
- { .address = NRF5_FICR_ER2 },
- { .address = NRF5_FICR_ER3 },
- { .address = NRF5_FICR_IR0 },
- { .address = NRF5_FICR_IR1 },
- { .address = NRF5_FICR_IR2 },
- { .address = NRF5_FICR_IR3 },
- { .address = NRF5_FICR_DEVICEADDRTYPE },
- { .address = NRF5_FICR_DEVICEADDR0 },
- { .address = NRF5_FICR_DEVICEADDR1 },
- { .address = NRF5_FICR_OVERRIDEN },
- { .address = NRF5_FICR_NRF_1MBIT0 },
- { .address = NRF5_FICR_NRF_1MBIT1 },
- { .address = NRF5_FICR_NRF_1MBIT2 },
- { .address = NRF5_FICR_NRF_1MBIT3 },
- { .address = NRF5_FICR_NRF_1MBIT4 },
- { .address = NRF5_FICR_BLE_1MBIT0 },
- { .address = NRF5_FICR_BLE_1MBIT1 },
- { .address = NRF5_FICR_BLE_1MBIT2 },
- { .address = NRF5_FICR_BLE_1MBIT3 },
- { .address = NRF5_FICR_BLE_1MBIT4 },
- }, uicr[] = {
- { .address = NRF5_UICR_CLENR0, },
- { .address = NRF5_UICR_RBPCONF },
- { .address = NRF5_UICR_XTALFREQ },
- { .address = NRF5_UICR_FWID },
- };
+ struct nrf5_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ struct nrf5_info *chip = nbank->chip;
+ assert(chip);
- for (size_t i = 0; i < ARRAY_SIZE(ficr); i++) {
- res = target_read_u32(chip->target, ficr[i].address,
- &ficr[i].value);
+ if (chip->features & NRF5_FEATURE_SERIES_51) {
+ uint32_t ppfc;
+ res = target_read_u32(target, NRF51_FICR_PPFC,
+ &ppfc);
if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read %" PRIx32, ficr[i].address);
+ LOG_ERROR("Couldn't read PPFC register");
return res;
}
- }
- for (size_t i = 0; i < ARRAY_SIZE(uicr); i++) {
- res = target_read_u32(chip->target, uicr[i].address,
- &uicr[i].value);
- if (res != ERROR_OK) {
- LOG_ERROR("Couldn't read %" PRIx32, uicr[i].address);
- return res;
+ if ((ppfc & 0xFF) == 0x00) {
+ LOG_ERROR("Code region 0 size was pre-programmed at the factory, "
+ "mass erase command won't work.");
+ return ERROR_FAIL;
}
}
- snprintf(buf, buf_size,
- "\n[factory information control block]\n\n"
- "code page size: %"PRIu32"B\n"
- "code memory size: %"PRIu32"kB\n"
- "code region 0 size: %"PRIu32"kB\n"
- "pre-programmed code: %s\n"
- "number of ram blocks: %"PRIu32"\n"
- "ram block 0 size: %"PRIu32"B\n"
- "ram block 1 size: %"PRIu32"B\n"
- "ram block 2 size: %"PRIu32"B\n"
- "ram block 3 size: %"PRIu32 "B\n"
- "config id: %" PRIx32 "\n"
- "device id: 0x%"PRIx32"%08"PRIx32"\n"
- "encryption root: 0x%08"PRIx32"%08"PRIx32"%08"PRIx32"%08"PRIx32"\n"
- "identity root: 0x%08"PRIx32"%08"PRIx32"%08"PRIx32"%08"PRIx32"\n"
- "device address type: 0x%"PRIx32"\n"
- "device address: 0x%"PRIx32"%08"PRIx32"\n"
- "override enable: %"PRIx32"\n"
- "NRF_1MBIT values: %"PRIx32" %"PRIx32" %"PRIx32" %"PRIx32" %"PRIx32"\n"
- "BLE_1MBIT values: %"PRIx32" %"PRIx32" %"PRIx32" %"PRIx32" %"PRIx32"\n"
- "\n[user information control block]\n\n"
- "code region 0 size: %"PRIu32"kB\n"
- "read back protection configuration: %"PRIx32"\n"
- "reset value for XTALFREQ: %"PRIx32"\n"
- "firmware id: 0x%04"PRIx32,
- ficr[0].value,
- (ficr[1].value * ficr[0].value) / 1024,
- (ficr[2].value == 0xFFFFFFFF) ? 0 : ficr[2].value / 1024,
- ((ficr[3].value & 0xFF) == 0x00) ? "present" : "not present",
- ficr[4].value,
- ficr[5].value,
- (ficr[6].value == 0xFFFFFFFF) ? 0 : ficr[6].value,
- (ficr[7].value == 0xFFFFFFFF) ? 0 : ficr[7].value,
- (ficr[8].value == 0xFFFFFFFF) ? 0 : ficr[8].value,
- ficr[9].value,
- ficr[10].value, ficr[11].value,
- ficr[12].value, ficr[13].value, ficr[14].value, ficr[15].value,
- ficr[16].value, ficr[17].value, ficr[18].value, ficr[19].value,
- ficr[20].value,
- ficr[21].value, ficr[22].value,
- ficr[23].value,
- ficr[24].value, ficr[25].value, ficr[26].value, ficr[27].value, ficr[28].value,
- ficr[29].value, ficr[30].value, ficr[31].value, ficr[32].value, ficr[33].value,
- (uicr[0].value == 0xFFFFFFFF) ? 0 : uicr[0].value / 1024,
- uicr[1].value & 0xFFFF,
- uicr[2].value & 0xFF,
- uicr[3].value & 0xFFFF);
+ res = nrf5_erase_all(chip);
+ if (res == ERROR_OK) {
+ LOG_INFO("Mass erase completed.");
+ if (chip->features & NRF5_FEATURE_SERIES_51)
+ LOG_INFO("A reset or power cycle is required if the flash was protected before.");
- return ERROR_OK;
+ } else {
+ LOG_ERROR("Failed to erase the chip");
+ }
+
+ return res;
}
+
static const struct command_registration nrf5_exec_command_handlers[] = {
{
.name = "mass_erase",
};
/* We need to retain the flash-driver name as well as the commands
- * for backwards compatability */
+ * for backwards compatibility */
const struct flash_driver nrf51_flash = {
.name = "nrf51",
.commands = nrf5_command_handlers,
Code Review / openocd.git / blobdiff