linker error: fix problem with duplicate fn

A fn was copied instead of moved to a new file. The linker
can discard exact copies of fn's without warning.

This is a C++'ism.

However on my Ubuntu 9.10 machine, it fails.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c
index dcad0fbcf9ecdee73ad8658e3f37be4313bd58c5..4afd50cb5a824a1b06641850bf45acac063bafb3 100644 (file)
--- a/src/target/arm_adi_v5.c
+++ b/src/target/arm_adi_v5.c
@@ -1597,36 +1597,3 @@ static const uint8_t jtag2swd_bitseq[] = {
        0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 };
 
-/**
- * Put the debug link into SWD mode, if the target supports it.
- * The link's initial mode may be either JTAG (for example,
- * with SWJ-DP after reset) or SWD.
- *
- * @param target Enters SWD mode (if possible).
- *
- * Note that targets using the JTAG-DP do not support SWD, and that
- * some targets which could otherwise support it may have have been
- * configured to disable SWD signaling
- *
- * @return ERROR_OK or else a fault code.
- */
-int dap_to_swd(struct target *target)
-{
-       int retval;
-
-       LOG_DEBUG("Enter SWD mode");
-
-       /* REVISIT it's nasty to need to make calls to a "jtag"
-        * subsystem if the link isn't in JTAG mode...
-        */
-
-       retval =  jtag_add_tms_seq(8 * sizeof(jtag2swd_bitseq),
-                       jtag2swd_bitseq, TAP_INVALID);
-       if (retval == ERROR_OK)
-               retval = jtag_execute_queue();
-
-       /* REVISIT set up the DAP's ops vector for SWD mode. */
-
-       return retval;
-}
-