Commit
290eac04b93c ("drivers/linuxgpiod: Migrate to adapter gpio
commands") introduced an incorrect check to determine if the
library libgpiod declares the line request flags:
GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE
GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP
GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN
The names above are declared by the library inside an enum, thus
cannot be used by the C preprocessor in a #ifdef.
Determine in configure if the version of libgpiod provides the
line request flags for "bias" and define a C macro.
Use the new macro in the driver code.
Change-Id: Iaa452230f4753fce4c6e9daa254299cedb7cab7f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 290eac04b93c ("drivers/linuxgpiod: Migrate to adapter gpio commands")
Reviewed-on: https://review.openocd.org/c/openocd/+/8186
Tested-by: jenkins
Reviewed-by: Michael Heimpold <michaheimpold@gmail.com>
PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
])
-PKG_CHECK_MODULES([LIBGPIOD], [libgpiod < 2.0], [use_libgpiod=yes], [use_libgpiod=no])
+PKG_CHECK_MODULES([LIBGPIOD], [libgpiod < 2.0], [
+ use_libgpiod=yes
+ PKG_CHECK_EXISTS([libgpiod >= 1.5],
+ [AC_DEFINE([HAVE_LIBGPIOD1_FLAGS_BIAS], [1], [define if libgpiod v1 has line request flags bias])])
+], [use_libgpiod=no])
PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2],
[use_libjaylink=yes], [use_libjaylink=no])
switch (adapter_gpio_config[idx].pull) {
case ADAPTER_GPIO_PULL_NONE:
-#ifdef GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE
+#ifdef HAVE_LIBGPIOD1_FLAGS_BIAS
flags |= GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE;
#endif
break;
case ADAPTER_GPIO_PULL_UP:
-#ifdef GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP
+#ifdef HAVE_LIBGPIOD1_FLAGS_BIAS
flags |= GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP;
#else
LOG_WARNING("linuxgpiod: ignoring request for pull-up on %s: not supported by gpiod v%s",
#endif
break;
case ADAPTER_GPIO_PULL_DOWN:
-#ifdef GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN
+#ifdef HAVE_LIBGPIOD1_FLAGS_BIAS
flags |= GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN;
#else
LOG_WARNING("linuxgpiod: ignoring request for pull-down on %s: not supported by gpiod v%s",
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)