Most of these happened to be in the target.h file.
Some of those are associated with symbols that could be
removed at some point ... e.g. NVP_ASSERT/true and its
sibling NVP_DEASSERT/false.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
#include <target/armv7a.h>
#include <target/armv7a.h>
-extern char* cortex_a8_state_strings[];
-
#define CORTEX_A8_COMMON_MAGIC 0x411fc082
/* See Cortex-A8 TRM section 12.5 */
#define CORTEX_A8_COMMON_MAGIC 0x411fc082
/* See Cortex-A8 TRM section 12.5 */
#include "image.h"
#include "arm_disassembler.h"
#include "register.h"
#include "image.h"
#include "arm_disassembler.h"
#include "register.h"
+#include "etm_dummy.h"
+#include "oocd_trace.h"
-/* ETM trace analysis functionality
- *
- */
-extern struct etm_capture_driver etm_dummy_capture_driver;
-#if BUILD_OOCD_TRACE == 1
-extern struct etm_capture_driver oocd_trace_capture_driver;
-#endif
+/* ETM trace analysis functionality */
static struct etm_capture_driver *etm_capture_drivers[] =
{
static struct etm_capture_driver *etm_capture_drivers[] =
{
struct target_event_callback *target_event_callbacks = NULL;
struct target_timer_callback *target_timer_callbacks = NULL;
struct target_event_callback *target_event_callbacks = NULL;
struct target_timer_callback *target_timer_callbacks = NULL;
-const Jim_Nvp nvp_assert[] = {
+static const Jim_Nvp nvp_assert[] = {
{ .name = "assert", NVP_ASSERT },
{ .name = "deassert", NVP_DEASSERT },
{ .name = "T", NVP_ASSERT },
{ .name = "assert", NVP_ASSERT },
{ .name = "deassert", NVP_DEASSERT },
{ .name = "T", NVP_ASSERT },
{ .name = NULL, .value = -1 }
};
{ .name = NULL, .value = -1 }
};
-const Jim_Nvp nvp_error_target[] = {
+static const Jim_Nvp nvp_error_target[] = {
{ .value = ERROR_TARGET_INVALID, .name = "err-invalid" },
{ .value = ERROR_TARGET_INIT_FAILED, .name = "err-init-failed" },
{ .value = ERROR_TARGET_TIMEOUT, .name = "err-timeout" },
{ .value = ERROR_TARGET_INVALID, .name = "err-invalid" },
{ .value = ERROR_TARGET_INIT_FAILED, .name = "err-init-failed" },
{ .value = ERROR_TARGET_TIMEOUT, .name = "err-timeout" },
{ .name = NULL, .value = -1 }
};
{ .name = NULL, .value = -1 }
};
-const Jim_Nvp nvp_target_state[] = {
+static const Jim_Nvp nvp_target_state[] = {
{ .name = "unknown", .value = TARGET_UNKNOWN },
{ .name = "running", .value = TARGET_RUNNING },
{ .name = "halted", .value = TARGET_HALTED },
{ .name = "unknown", .value = TARGET_UNKNOWN },
{ .name = "running", .value = TARGET_RUNNING },
{ .name = "halted", .value = TARGET_HALTED },
{ .name = NULL, .value = -1 },
};
{ .name = NULL, .value = -1 },
};
-const Jim_Nvp nvp_target_endian[] = {
+static const Jim_Nvp nvp_target_endian[] = {
{ .name = "big", .value = TARGET_BIG_ENDIAN },
{ .name = "little", .value = TARGET_LITTLE_ENDIAN },
{ .name = "be", .value = TARGET_BIG_ENDIAN },
{ .name = "big", .value = TARGET_BIG_ENDIAN },
{ .name = "little", .value = TARGET_LITTLE_ENDIAN },
{ .name = "be", .value = TARGET_BIG_ENDIAN },
{ .name = NULL, .value = -1 },
};
{ .name = NULL, .value = -1 },
};
-const Jim_Nvp nvp_reset_modes[] = {
+static const Jim_Nvp nvp_reset_modes[] = {
{ .name = "unknown", .value = RESET_UNKNOWN },
{ .name = "run" , .value = RESET_RUN },
{ .name = "halt" , .value = RESET_HALT },
{ .name = "unknown", .value = RESET_UNKNOWN },
{ .name = "run" , .value = RESET_RUN },
{ .name = "halt" , .value = RESET_HALT },
TARGET_DEBUG_RUNNING = 4,
};
TARGET_DEBUG_RUNNING = 4,
};
-extern const Jim_Nvp nvp_target_state[];
-
enum nvp_assert {
NVP_DEASSERT,
NVP_ASSERT,
};
enum nvp_assert {
NVP_DEASSERT,
NVP_ASSERT,
};
-extern const Jim_Nvp nvp_assert[];
-
enum target_reset_mode
{
RESET_UNKNOWN = 0,
enum target_reset_mode
{
RESET_UNKNOWN = 0,
RESET_INIT = 3, /* reset and halt target out of reset, then run init script */
};
RESET_INIT = 3, /* reset and halt target out of reset, then run init script */
};
-extern const Jim_Nvp nvp_reset_mode[];
-
enum target_debug_reason
{
DBG_REASON_DBGRQ = 0,
enum target_debug_reason
{
DBG_REASON_DBGRQ = 0,
TARGET_BIG_ENDIAN = 1, TARGET_LITTLE_ENDIAN = 2
};
TARGET_BIG_ENDIAN = 1, TARGET_LITTLE_ENDIAN = 2
};
-extern const Jim_Nvp nvp_target_endian[];
-
struct working_area
{
uint32_t address;
struct working_area
{
uint32_t address;
#define ERROR_TARGET_NOT_RUNNING (-310)
#define ERROR_TARGET_NOT_EXAMINED (-311)
#define ERROR_TARGET_NOT_RUNNING (-310)
#define ERROR_TARGET_NOT_EXAMINED (-311)
-extern const Jim_Nvp nvp_error_target[];
-
const char *target_strerror_safe(int err);
#endif /* TARGET_H */
const char *target_strerror_safe(int err);
#endif /* TARGET_H */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)