Add STM32F2X/STLINK target config file.

Change-Id: I02161fa05da993b5b966c31a706667d1bd91935d
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/287
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/tcl/target/stm32f2x_stlink.cfg b/tcl/target/stm32f2x_stlink.cfg
new file mode 100644 (file)
index 0000000..bb113e0
--- /dev/null
+++ b/tcl/target/stm32f2x_stlink.cfg
@@ -0,0 +1,32 @@
+#
+#
+#
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME stm32
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 64kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x10000
+}
+
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x2ba01477
+}
+
+stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f2x 0x08000000 0 0 0 $_TARGETNAME