/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
+ * Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
* This program is free software; you can redistribute it and/or modify *
.info = cfi_info
};
+/* CFI fixups foward declarations */
+void cfi_fixup_0002_erase_regions(flash_bank_t *flash, void *param);
+void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t *flash, void *param);
+
+/* fixup after identifying JEDEC manufactuer and ID */
+cfi_fixup_t cfi_jedec_fixups[] = {
+ {0, 0, NULL, NULL}
+};
+
+/* fixup after reading cmdset 0002 primary query table */
+cfi_fixup_t cfi_0002_fixups[] = {
+ {CFI_MFR_ATMEL, 0x00C8, cfi_fixup_atmel_reversed_erase_regions, NULL},
+ {CFI_MFR_ANY, CFI_ID_ANY, cfi_fixup_0002_erase_regions, NULL},
+ {0, 0, NULL, NULL}
+};
+
+/* fixup after reading cmdset 0001 primary query table */
+cfi_fixup_t cfi_0001_fixups[] = {
+ {0, 0, NULL, NULL}
+};
+
+void cfi_fixup(flash_bank_t *bank, cfi_fixup_t *fixups)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_fixup_t *f;
+
+ for (f = fixups; f->fixup; f++)
+ {
+ if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi_info->manufacturer)) &&
+ ((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id)))
+ {
+ f->fixup(bank, f->param);
+ }
+ }
+}
+
inline u32 flash_address(flash_bank_t *bank, int sector, u32 offset)
{
/* while the sector list isn't built, only accesses to sector 0 work */
return status;
}
+
+int cfi_spansion_wait_status_busy(flash_bank_t *bank, int timeout)
+{
+ u8 status, oldstatus;
+
+ oldstatus = cfi_get_u8(bank, 0, 0x0);
+
+ do {
+ status = cfi_get_u8(bank, 0, 0x0);
+ if ((status ^ oldstatus) & 0x40) {
+ if (status & 0x20) {
+ oldstatus = cfi_get_u8(bank, 0, 0x0);
+ status = cfi_get_u8(bank, 0, 0x0);
+ if ((status ^ oldstatus) & 0x40) {
+ ERROR("dq5 timeout, status: 0x%x", status);
+ return(ERROR_FLASH_OPERATION_FAILED);
+ } else {
+ DEBUG("status: 0x%x", status);
+ return(ERROR_OK);
+ }
+ }
+ } else {
+ DEBUG("status: 0x%x", status);
+ return(ERROR_OK);
+ }
+
+ oldstatus = status;
+ usleep(1000);
+ } while (timeout-- > 0);
+
+ ERROR("timeout, status: 0x%x", status);
+
+ return(ERROR_FLASH_BUSY);
+}
+
int cfi_read_intel_pri_ext(flash_bank_t *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_intel_pri_ext_t *pri_ext = malloc(sizeof(cfi_intel_pri_ext_t));
target_t *target = cfi_info->target;
u8 command[8];
-
+
cfi_info->pri_ext = pri_ext;
pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
return ERROR_OK;
}
+int cfi_read_spansion_pri_ext(flash_bank_t *bank)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = malloc(sizeof(cfi_spansion_pri_ext_t));
+ target_t *target = cfi_info->target;
+ u8 command[8];
+
+ cfi_info->pri_ext = pri_ext;
+
+ pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
+ pri_ext->pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
+ pri_ext->pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
+
+ if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
+ pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
+
+ DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
+
+ pri_ext->SiliconRevision = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
+ pri_ext->EraseSuspend = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
+ pri_ext->BlkProt = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
+ pri_ext->TmpBlkUnprotect = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8);
+ pri_ext->BlkProtUnprot = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
+ pri_ext->SimultaneousOps = cfi_query_u8(bank, 0, cfi_info->pri_addr + 10);
+ pri_ext->BurstMode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 11);
+ pri_ext->PageMode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 12);
+ pri_ext->VppMin = cfi_query_u8(bank, 0, cfi_info->pri_addr + 13);
+ pri_ext->VppMax = cfi_query_u8(bank, 0, cfi_info->pri_addr + 14);
+ pri_ext->TopBottom = cfi_query_u8(bank, 0, cfi_info->pri_addr + 15);
+
+ DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext->SiliconRevision,
+ pri_ext->EraseSuspend, pri_ext->BlkProt);
+
+ DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
+ pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps);
+
+ DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
+
+
+ DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
+ (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
+ (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+
+ DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
+
+ return ERROR_OK;
+}
+
+int cfi_read_atmel_pri_ext(flash_bank_t *bank)
+{
+ cfi_atmel_pri_ext_t atmel_pri_ext;
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = malloc(sizeof(cfi_spansion_pri_ext_t));
+ target_t *target = cfi_info->target;
+ u8 command[8];
+
+ /* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
+ * but a different primary extended query table.
+ * We read the atmel table, and prepare a valid AMD/Spansion query table.
+ */
+
+ memset(pri_ext, 0, sizeof(cfi_spansion_pri_ext_t));
+
+ cfi_info->pri_ext = pri_ext;
+
+ atmel_pri_ext.pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
+ atmel_pri_ext.pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
+ atmel_pri_ext.pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
+
+ if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R') || (atmel_pri_ext.pri[2] != 'I'))
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ pri_ext->pri[0] = atmel_pri_ext.pri[0];
+ pri_ext->pri[1] = atmel_pri_ext.pri[1];
+ pri_ext->pri[2] = atmel_pri_ext.pri[2];
+
+ atmel_pri_ext.major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
+ atmel_pri_ext.minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
+
+ DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0], atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
+
+ pri_ext->major_version = atmel_pri_ext.major_version;
+ pri_ext->minor_version = atmel_pri_ext.minor_version;
+
+ atmel_pri_ext.features = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
+ atmel_pri_ext.bottom_boot = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
+ atmel_pri_ext.burst_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
+ atmel_pri_ext.page_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8);
+
+ DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
+ atmel_pri_ext.features, atmel_pri_ext.bottom_boot, atmel_pri_ext.burst_mode, atmel_pri_ext.page_mode);
+
+ if (atmel_pri_ext.features & 0x02)
+ pri_ext->EraseSuspend = 2;
+
+ if (atmel_pri_ext.bottom_boot)
+ pri_ext->TopBottom = 2;
+ else
+ pri_ext->TopBottom = 3;
+
+ return ERROR_OK;
+}
+
+int cfi_read_0002_pri_ext(flash_bank_t *bank)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+
+ if (cfi_info->manufacturer == CFI_MFR_ATMEL)
+ {
+ return cfi_read_atmel_pri_ext(bank);
+ }
+ else
+ {
+ return cfi_read_spansion_pri_ext(bank);
+ }
+}
+
+int cfi_spansion_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ int printed;
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+
+ printed = snprintf(buf, buf_size, "\nSpansion primary algorithm extend information:\n");
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0],
+ pri_ext->pri[1], pri_ext->pri[2],
+ pri_ext->major_version, pri_ext->minor_version);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
+ (pri_ext->SiliconRevision) >> 2,
+ (pri_ext->SiliconRevision) & 0x03);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
+ pri_ext->EraseSuspend,
+ pri_ext->BlkProt);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "VppMin: %2.2d.%1.1x, VppMax: %2.2d.%1.1x\n",
+ (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
+ (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+
+ return ERROR_OK;
+}
+
int cfi_intel_info(struct flash_bank_s *bank, char *buf, int buf_size)
{
int printed;
return ERROR_OK;
}
-/* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#>
+/* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
*/
int cfi_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info;
+ int i;
if (argc < 6)
{
cfi_info = malloc(sizeof(cfi_flash_bank_t));
bank->driver_priv = cfi_info;
+ cfi_info->x16_as_x8 = 1;
+
cfi_info->target = get_target_by_num(strtoul(args[5], NULL, 0));
if (!cfi_info->target)
{
ERROR("no target '%s' configured", args[5]);
exit(-1);
}
-
+
+ for (i = 6; i < argc; i++)
+ {
+ if (strcmp(args[i], "x16_as_x8") != 0)
+ {
+ cfi_info->x16_as_x8 = 0;
+ }
+ }
+
cfi_info->write_algorithm = NULL;
/* bank wasn't probed yet */
return ERROR_OK;
}
+int cfi_spansion_erase(struct flash_bank_s *bank, int first, int last)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = cfi_info->target;
+ u8 command[8];
+ int i;
+
+ for (i = first; i <= last; i++)
+ {
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x2aa), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x80, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x2aa), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x30, command);
+ target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
+
+ if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->block_erase_timeout_typ)) == ERROR_OK)
+ bank->sectors[i].is_erased = 1;
+ else
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ return ERROR_OK;
+}
+
int cfi_erase(struct flash_bank_s *bank, int first, int last)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
case 3:
return cfi_intel_erase(bank, first, last);
break;
+ case 2:
+ return cfi_spansion_erase(bank, first, last);
+ break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
u8 busy_pattern[CFI_MAX_BUS_WIDTH];
u8 error_pattern[CFI_MAX_BUS_WIDTH];
int retval;
-
+
/* algorithm register usage:
* r0: source address (in RAM)
* r1: target address (in Flash)
buf_set_u32(reg_params[3].value, 0, 32, target_buffer_get_u32(target, write_command));
buf_set_u32(reg_params[5].value, 0, 32, target_buffer_get_u32(target, busy_pattern));
buf_set_u32(reg_params[6].value, 0, 32, target_buffer_get_u32(target, error_pattern));
+ buf_set_u32(reg_params[5].value, 0, 32, buf_get_u32(busy_pattern, 0, 32));
+ buf_set_u32(reg_params[6].value, 0, 32, buf_get_u32(error_pattern, 0, 32));
if ((retval = target->type->run_algorithm(target, 0, NULL, 7, reg_params, cfi_info->write_algorithm->address, cfi_info->write_algorithm->address + (13 * 4), 10000, &armv4_5_info)) != ERROR_OK)
{
return ERROR_OK;
}
+int cfi_spansion_write_block(struct flash_bank_s *bank, u8 *buffer, u32 address, u32 count)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = cfi_info->target;
+ reg_param_t reg_params[10];
+ armv4_5_algorithm_t armv4_5_info;
+ working_area_t *source;
+ u32 buffer_size = 32768;
+ u8 write_command[CFI_MAX_BUS_WIDTH];
+ u32 status;
+ int i;
+ int retval;
+ int exit_code = ERROR_OK;
+ int code_size;
+ void *code_p;
+
+ /* input parameters - */
+ /* R0 = source address */
+ /* R1 = destination address */
+ /* R2 = number of writes */
+ /* R3 = flash write command */
+ /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
+ /* output parameters - */
+ /* R5 = 0x80 ok 0x00 bad */
+ /* temp registers - */
+ /* R6 = value read from flash to test status */
+ /* R7 = holding register */
+ /* unlock registers - */
+ /* R8 = unlock1_addr */
+ /* R9 = unlock1_cmd */
+ /* R10 = unlock1_addr */
+ /* R11 = unlock1_cmd */
+
+ u32 word_32_code[] = {
+ /* 00008100 <sp_32_code>: */
+ 0xe4905004, /* ldr r5, [r0], #4 */
+ 0xe5889000, /* str r9, [r8] */
+ 0xe58ab000, /* str r11, [r10] */
+ 0xe5883000, /* str r3, [r8] */
+ 0xe5815000, /* str r5, [r1] */
+ 0xe1a00000, /* nop */
+ /* */
+ /* 00008110 <sp_32_busy>: */
+ 0xe5916000, /* ldr r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000007, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
+ 0xe0166124, /* ands r6, r6, r4, lsr #2 */
+ 0x0afffff9, /* beq 8110 <sp_32_busy> ; b if DQ5 low */
+ 0xe5916000, /* ldr r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
+ 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
+ 0x1a000004, /* bne 8154 <sp_32_done> */
+ /* */
+ /* 00008140 <sp_32_cont>: */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 8154 <sp_32_done> */
+ 0xe2811004, /* add r1, r1, #4 ; 0x4 */
+ 0xeaffffe8, /* b 8100 <sp_32_code> */
+ /* */
+ /* 00008154 <sp_32_done>: */
+ 0xeafffffe /* b 8154 <sp_32_done> */
+ };
+
+ u32 word_16_code[] = {
+ /* 00008158 <sp_16_code>: */
+ 0xe0d050b2, /* ldrh r5, [r0], #2 */
+ 0xe1c890b0, /* strh r9, [r8] */
+ 0xe1cab0b0, /* strh r11, [r10] */
+ 0xe1c830b0, /* strh r3, [r8] */
+ 0xe1c150b0, /* strh r5, [r1] */
+ 0xe1a00000, /* nop (mov r0,r0) */
+ /* */
+ /* 00008168 <sp_16_busy>: */
+ 0xe1d160b0, /* ldrh r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000007, /* beq 8198 <sp_16_cont> */
+ 0xe0166124, /* ands r6, r6, r4, lsr #2 */
+ 0x0afffff9, /* beq 8168 <sp_16_busy> */
+ 0xe1d160b0, /* ldrh r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000001, /* beq 8198 <sp_16_cont> */
+ 0xe3a05000, /* mov r5, #0 ; 0x0 */
+ 0x1a000004, /* bne 81ac <sp_16_done> */
+ /* */
+ /* 00008198 <sp_16_cont>: */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 81ac <sp_16_done> */
+ 0xe2811002, /* add r1, r1, #2 ; 0x2 */
+ 0xeaffffe8, /* b 8158 <sp_16_code> */
+ /* */
+ /* 000081ac <sp_16_done>: */
+ 0xeafffffe /* b 81ac <sp_16_done> */
+ };
+
+ u32 word_8_code[] = {
+ /* 000081b0 <sp_16_code_end>: */
+ 0xe4d05001, /* ldrb r5, [r0], #1 */
+ 0xe5c89000, /* strb r9, [r8] */
+ 0xe5cab000, /* strb r11, [r10] */
+ 0xe5c83000, /* strb r3, [r8] */
+ 0xe5c15000, /* strb r5, [r1] */
+ 0xe1a00000, /* nop (mov r0,r0) */
+ /* */
+ /* 000081c0 <sp_8_busy>: */
+ 0xe5d16000, /* ldrb r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000007, /* beq 81f0 <sp_8_cont> */
+ 0xe0166124, /* ands r6, r6, r4, lsr #2 */
+ 0x0afffff9, /* beq 81c0 <sp_8_busy> */
+ 0xe5d16000, /* ldrb r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000001, /* beq 81f0 <sp_8_cont> */
+ 0xe3a05000, /* mov r5, #0 ; 0x0 */
+ 0x1a000004, /* bne 8204 <sp_8_done> */
+ /* */
+ /* 000081f0 <sp_8_cont>: */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 8204 <sp_8_done> */
+ 0xe2811001, /* add r1, r1, #1 ; 0x1 */
+ 0xeaffffe8, /* b 81b0 <sp_16_code_end> */
+ /* */
+ /* 00008204 <sp_8_done>: */
+ 0xeafffffe /* b 8204 <sp_8_done> */
+ };
+
+ armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
+ armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
+ /* flash write code */
+ if (!cfi_info->write_algorithm)
+ {
+ /* write algorithm code to working area */
+ if (bank->bus_width == 1)
+ {
+ code_size = sizeof(word_8_code);
+ code_p = word_8_code;
+ }
+ else if (bank->bus_width == 2)
+ {
+ code_size = sizeof(word_16_code);
+ code_p = word_16_code;
+ }
+ else if (bank->bus_width == 4)
+ {
+ code_size = sizeof(word_32_code);
+ code_p = word_32_code;
+ }
+ else
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (target_alloc_working_area(target, code_size,
+ &cfi_info->write_algorithm) != ERROR_OK)
+ {
+ WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ target_write_buffer(target, cfi_info->write_algorithm->address,
+ code_size, code_p);
+ }
+
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
+ {
+ buffer_size /= 2;
+ if (buffer_size <= 256)
+ {
+ /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
+ if (cfi_info->write_algorithm)
+ target_free_working_area(target, cfi_info->write_algorithm);
+
+ WARNING("not enough working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ };
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
+ init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
+ init_reg_param(®_params[5], "r5", 32, PARAM_IN);
+ init_reg_param(®_params[6], "r8", 32, PARAM_OUT);
+ init_reg_param(®_params[7], "r9", 32, PARAM_OUT);
+ init_reg_param(®_params[8], "r10", 32, PARAM_OUT);
+ init_reg_param(®_params[9], "r11", 32, PARAM_OUT);
+
+ while (count > 0)
+ {
+ u32 thisrun_count = (count > buffer_size) ? buffer_size : count;
+
+ target_write_buffer(target, source->address, thisrun_count, buffer);
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
+ cfi_command(bank, 0xA0, write_command);
+ buf_set_u32(reg_params[3].value, 0, 32, buf_get_u32(write_command, 0, 32));
+ cfi_command(bank, 0x80, write_command);
+ buf_set_u32(reg_params[4].value, 0, 32, buf_get_u32(write_command, 0, 32));
+ buf_set_u32(reg_params[6].value, 0, 32, flash_address(bank, 0, 0x555));
+ buf_set_u32(reg_params[7].value, 0, 32, 0xaa);
+ buf_set_u32(reg_params[8].value, 0, 32, flash_address(bank, 0, 0xaaa));
+ buf_set_u32(reg_params[9].value, 0, 32, 0x55);
+
+ retval = target->type->run_algorithm(target, 0, NULL, 10, reg_params,
+ cfi_info->write_algorithm->address,
+ cfi_info->write_algorithm->address + (code_size - 4),
+ 10000, &armv4_5_info);
+
+ status = buf_get_u32(reg_params[5].value, 0, 32);
+
+ if ((retval != ERROR_OK) || status != 0x80)
+ {
+ DEBUG("status: 0x%x", status);
+ exit_code = ERROR_FLASH_OPERATION_FAILED;
+ break;
+ }
+
+ buffer += thisrun_count;
+ address += thisrun_count;
+ count -= thisrun_count;
+ }
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+ destroy_reg_param(®_params[3]);
+ destroy_reg_param(®_params[4]);
+ destroy_reg_param(®_params[5]);
+ destroy_reg_param(®_params[6]);
+ destroy_reg_param(®_params[7]);
+ destroy_reg_param(®_params[8]);
+ destroy_reg_param(®_params[9]);
+
+ return exit_code;
+}
+
int cfi_intel_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
return ERROR_OK;
}
+int cfi_spansion_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = cfi_info->target;
+ u8 command[8];
+
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x2aa), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0xa0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ target->type->write_memory(target, address, bank->bus_width, 1, word);
+
+ if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != ERROR_OK)
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
int cfi_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
case 3:
return cfi_intel_write_word(bank, word, address);
break;
+ case 2:
+ return cfi_spansion_write_word(bank, word, address);
+ break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
case 3:
retval = cfi_intel_write_block(bank, buffer, write_p, count);
break;
+ case 2:
+ retval = cfi_spansion_write_block(bank, buffer, write_p, count);
+ break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
retval = ERROR_FLASH_OPERATION_FAILED;
return ERROR_OK;
}
+void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t *bank, void *param)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+
+ pri_ext->_reversed_geometry = 1;
+}
+
+void cfi_fixup_0002_erase_regions(flash_bank_t *bank, void *param)
+{
+ int i;
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+
+ if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3))
+ {
+ DEBUG("swapping reversed erase region information on cmdset 0002 device");
+
+ for (i = 0; i < cfi_info->num_erase_regions / 2; i++)
+ {
+ int j = (cfi_info->num_erase_regions - 1) - i;
+ u32 swap;
+
+ swap = cfi_info->erase_region_info[i];
+ cfi_info->erase_region_info[i] = cfi_info->erase_region_info[j];
+ cfi_info->erase_region_info[j] = swap;
+ }
+ }
+}
+
int cfi_probe(struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
target_t *target = cfi_info->target;
u8 command[8];
+ int num_sectors = 0;
+ int i;
+ int sector = 0;
+ u32 offset = 0;
+
+ /* switch to read identifier codes mode ("AUTOSELECT") */
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x2aa), bank->bus_width, 1, command);
+ cfi_command(bank, 0x90, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ if (bank->chip_width == 1)
+ {
+ u8 manufacturer, device_id;
+ target_read_u8(target, bank->base + 0x0, &manufacturer);
+ target_read_u8(target, bank->base + 0x1, &device_id);
+ cfi_info->manufacturer = manufacturer;
+ cfi_info->device_id = device_id;
+ }
+ else if (bank->chip_width == 2)
+ {
+ target_read_u16(target, bank->base + 0x0, &cfi_info->manufacturer);
+ target_read_u16(target, bank->base + 0x2, &cfi_info->device_id);
+ }
+ /* switch back to read array mode */
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command);
+ cfi_command(bank, 0xff, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command);
+
+ cfi_fixup(bank, cfi_jedec_fixups);
+ /* enter CFI query mode
+ * according to JEDEC Standard No. 68.01,
+ * a single bus sequence with address = 0x55, data = 0x98 should put
+ * the device into CFI query mode.
+ *
+ * SST flashes clearly violate this, and we will consider them incompatbile for now
+ */
cfi_command(bank, 0x98, command);
target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
if (cfi_info->num_erase_regions)
{
- int i;
- int num_sectors = 0;
- int sector = 0;
- u32 offset = 0;
cfi_info->erase_region_info = malloc(4 * cfi_info->num_erase_regions);
-
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
num_sectors += (cfi_info->erase_region_info[i] & 0xffff) + 1;
}
+ }
+ else
+ {
+ cfi_info->erase_region_info = NULL;
+ }
+ /* We need to read the primary algorithm extended query table before calculating
+ * the sector layout to be able to apply fixups
+ */
+ switch(cfi_info->pri_id)
+ {
+ /* Intel command set (standard and extended) */
+ case 0x0001:
+ case 0x0003:
+ cfi_read_intel_pri_ext(bank);
+ cfi_fixup(bank, cfi_0001_fixups);
+ break;
+ /* AMD/Spansion, Atmel, ... command set */
+ case 0x0002:
+ cfi_read_0002_pri_ext(bank);
+ cfi_fixup(bank, cfi_0002_fixups);
+ break;
+ default:
+ ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ break;
+ }
+
+ if (cfi_info->num_erase_regions == 0)
+ {
+ /* a device might have only one erase block, spanning the whole device */
+ bank->num_sectors = 1;
+ bank->sectors = malloc(sizeof(flash_sector_t));
+
+ bank->sectors[sector].offset = 0x0;
+ bank->sectors[sector].size = bank->size;
+ bank->sectors[sector].is_erased = -1;
+ bank->sectors[sector].is_protected = -1;
+ }
+ else
+ {
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
int j;
}
}
}
- else
- {
- cfi_info->erase_region_info = NULL;
- }
-
- switch(cfi_info->pri_id)
- {
- case 1:
- case 3:
- cfi_read_intel_pri_ext(bank);
- break;
- default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
- break;
- }
- /* return to read array mode */
+ /* return to read array mode
+ * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
+ */
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
cfi_command(bank, 0xff, command);
return ERROR_OK;
}
+int cfi_spansion_protect_check(struct flash_bank_s *bank)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = cfi_info->target;
+ u8 command[8];
+ int i;
+
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x2aa), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x90, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x555), bank->bus_width, 1, command);
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ u8 block_status = cfi_get_u8(bank, i, 0x2);
+
+ if (block_status & 1)
+ bank->sectors[i].is_protected = 1;
+ else
+ bank->sectors[i].is_protected = 0;
+ }
+
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ return ERROR_OK;
+}
+
int cfi_protect_check(struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
case 3:
return cfi_intel_protect_check(bank);
break;
+ case 2:
+ return cfi_spansion_protect_check(bank);
+ break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
printed = snprintf(buf, buf_size, "\ncfi information:\n");
buf += printed;
buf_size -= printed;
-
+
+ printed = snprintf(buf, buf_size, "\nmfr: 0x%4.4x, id:0x%4.4x\n",
+ cfi_info->manufacturer, cfi_info->device_id);
+ buf += printed;
+ buf_size -= printed;
+
printed = snprintf(buf, buf_size, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
buf += printed;
buf_size -= printed;
case 3:
cfi_intel_info(bank, buf, buf_size);
break;
+ case 2:
+ cfi_spansion_info(bank, buf, buf_size);
+ break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
Code Review / openocd.git / commitdiff