int trst_with_tlr = 0;
int retval;
+ /* FIX!!! there are *many* different cases here. A better
+ * approach is needed for legal combinations of transitions...
+ */
+ if ((jtag_reset_config & RESET_HAS_SRST)&&
+ (jtag_reset_config & RESET_HAS_TRST)&&
+ ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)&&
+ ((jtag_reset_config & RESET_TRST_PULLS_SRST)==0))
+ {
+ if (((req_tlr_or_trst&&!jtag_trst)||
+ (!req_tlr_or_trst&&jtag_trst))&&
+ ((req_srst&&!jtag_srst)||
+ (!req_srst&&jtag_srst)))
+ {
+ LOG_ERROR("BUG: transition of req_tlr_or_trst and req_srst in the same jtag_add_reset() call is undefined");
+ }
+ }
+
/* Make sure that jtag_reset_config allows the requested reset */
/* if SRST pulls TRST, we can't fulfill srst == 1 with trst == 0 */
if (((jtag_reset_config & RESET_SRST_PULLS_TRST) && (req_srst == 1)) && (!req_tlr_or_trst))
return ERROR_OK;
}
-int jtag_init(struct command_context_s *cmd_ctx)
+static int jtag_init_inner(struct command_context_s *cmd_ctx)
{
int validate_tries = 0;
jtag_device_t *device;
return ERROR_OK;
}
+int jtag_init_reset(struct command_context_s *cmd_ctx)
+{
+ int retval;
+ LOG_DEBUG("Trying to bring the JTAG controller to life by asserting TRST / tms");
+
+ /* Reset can happen after a power cycle.
+ *
+ * Ideally we would only assert TRST or run tms before the target reset.
+ *
+ * However w/srst_pulls_trst, trst is asserted together with the target
+ * reset whether we want it or not.
+ *
+ * NB! Some targets have JTAG circuitry disabled until a
+ * trst & srst has been asserted.
+ *
+ * NB! here we assume nsrst/ntrst delay are sufficient!
+ *
+ * NB! order matters!!!! srst *can* disconnect JTAG circuitry
+ *
+ */
+ jtag_add_reset(1, 0); /* TMS or TRST */
+ if (jtag_reset_config & RESET_HAS_SRST)
+ {
+ jtag_add_reset(1, 1);
+ if ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)
+ jtag_add_reset(0, 1);
+ }
+ jtag_add_reset(0, 0);
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ return retval;
+
+ /* Check that we can communication on the JTAG chain + eventually we want to
+ * be able to perform enumeration only after OpenOCD has started
+ * telnet and GDB server
+ *
+ * That would allow users to more easily perform any magic they need to before
+ * reset happens.
+ */
+ return jtag_init_inner(cmd_ctx);
+}
+
+int jtag_init(struct command_context_s *cmd_ctx)
+{
+ if (jtag_init_inner(cmd_ctx)==ERROR_OK)
+ {
+ return ERROR_OK;
+ }
+ return jtag_init_reset(cmd_ctx);
+}
+
static int default_khz(int khz, int *jtag_speed)
{
extern enum reset_types jtag_reset_config;
-/* JTAG subsystem */
+/* initialize JTAG chain using only a TLR reset. If init fails,
+ * try reset + init.
+ */
extern int jtag_init(struct command_context_s *cmd_ctx);
+/* reset, then initialize JTAG chain */
+extern int jtag_init_reset(struct command_context_s *cmd_ctx);
extern int jtag_register_commands(struct command_context_s *cmd_ctx);
/* JTAG interface, can be implemented with a software or hardware fifo
* This is why combinations such as "reset_config srst_only srst_pulls_trst"
* are supported.
*
+ * only req_tlr_or_trst and srst can have a transition for a
+ * call as the effects of transitioning both at the "same time"
+ * are undefined, but when srst_pulls_trst or vice versa,
+ * then trst & srst *must* be asserted together.
*/
extern void jtag_add_reset(int req_tlr_or_trst, int srst);
/* this drives the actual srst and trst pins. srst will always be 0
return ERROR_OK;
}
+static int daemon_startup = 0;
+
+int handle_daemon_startup_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc==0)
+ return ERROR_OK;
+ if (argc > 1 )
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ daemon_startup = strcmp("reset", args[0])==0;
+
+ command_print(cmd_ctx, OPENOCD_VERSION);
+
+ return ERROR_OK;
+}
+
+
void exit_handler(void)
{
/* close JTAG interface */
jtag->quit();
}
+
+/* OpenOCD can't really handle failure of this command. Patches welcome! :-) */
+int handle_init_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ static int initialized=0;
+ if (initialized)
+ return ERROR_OK;
+
+ initialized=1;
+
+ command_set_output_handler(cmd_ctx, configuration_output_handler, NULL);
+
+ atexit(exit_handler);
+
+ if (jtag_init(cmd_ctx) != ERROR_OK)
+ return ERROR_FAIL;
+ LOG_DEBUG("jtag init complete");
+
+ if (target_init(cmd_ctx) != ERROR_OK)
+ return ERROR_FAIL;
+ LOG_DEBUG("target init complete");
+
+ if (flash_init_drivers(cmd_ctx) != ERROR_OK)
+ return ERROR_FAIL;
+ LOG_DEBUG("flash init complete");
+
+ if (nand_init(cmd_ctx) != ERROR_OK)
+ return ERROR_FAIL;
+ LOG_DEBUG("NAND init complete");
+
+ if (pld_init(cmd_ctx) != ERROR_OK)
+ return ERROR_FAIL;
+ LOG_DEBUG("pld init complete");
+
+ /* initialize tcp server */
+ server_init();
+
+ /* initialize telnet subsystem */
+ telnet_init("Open On-Chip Debugger");
+ gdb_init();
+
+ return ERROR_OK;
+}
+
+
/* implementations of OpenOCD that uses multithreading needs to lock OpenOCD while calling
* OpenOCD fn's. No-op in vanilla OpenOCD
*/
register_command(cmd_ctx, NULL, "version", handle_version_command,
COMMAND_EXEC, "show OpenOCD version");
-
+ register_command(cmd_ctx, NULL, "daemon_startup", handle_daemon_startup_command, COMMAND_CONFIG,
+ "deprecated - use \"init\" and \"reset\" at end of startup script instead");
+
/* register subsystem commands */
server_register_commands(cmd_ctx);
telnet_register_commands(cmd_ctx);
/* DANGER!!! make sure that the line above does not appear in a patch, do not remove */
/* DANGER!!! make sure that the line above does not appear in a patch, do not remove */
+ register_command(cmd_ctx, NULL, "init", handle_init_command,
+ COMMAND_ANY, "initializes target and servers - nop on subsequent invocations");
+
cfg_cmd_ctx = copy_command_context(cmd_ctx);
cfg_cmd_ctx->mode = COMMAND_CONFIG;
command_set_output_handler(cfg_cmd_ctx, configuration_output_handler, NULL);
command_done(cfg_cmd_ctx);
- command_set_output_handler(cmd_ctx, configuration_output_handler, NULL);
-
- atexit(exit_handler);
-
- if (jtag_init(cmd_ctx) != ERROR_OK)
- return EXIT_FAILURE;
- LOG_DEBUG("jtag init complete");
-
- if (target_init(cmd_ctx) != ERROR_OK)
- return EXIT_FAILURE;
- LOG_DEBUG("target init complete");
-
- if (flash_init_drivers(cmd_ctx) != ERROR_OK)
+ if (command_run_line(cmd_ctx, "init")!=ERROR_OK)
return EXIT_FAILURE;
- LOG_DEBUG("flash init complete");
-
- if (nand_init(cmd_ctx) != ERROR_OK)
- return EXIT_FAILURE;
- LOG_DEBUG("NAND init complete");
-
- if (pld_init(cmd_ctx) != ERROR_OK)
- return EXIT_FAILURE;
- LOG_DEBUG("pld init complete");
-
- /* initialize tcp server */
- server_init();
-
- /* initialize telnet subsystem */
- telnet_init("Open On-Chip Debugger");
- gdb_init();
-
- /* call any target resets */
- if (target_init_reset(cmd_ctx) != ERROR_OK)
- return EXIT_FAILURE;
- LOG_DEBUG("target init reset complete");
+
+ if (daemon_startup)
+ command_run_line(cmd_ctx, "reset");
/* handle network connections */
server_loop(cmd_ctx);
if ((target->reset_mode == RESET_HALT) || (target->reset_mode == RESET_INIT))
{
+ reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+
+ /* program EmbeddedICE Debug Control Register to deassert DBGRQ
+ * i.e. resume.
+ */
+ buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
+ embeddedice_store_reg(dbg_ctrl);
+
/*
* Some targets do not support communication while SRST is asserted. We need to
* set up the reset vector catch here.
}
}
- /* we can't know what state the target is in as we might e.g.
- * be resetting after a power dropout, so we need to issue a tms/srst
- */
-
- /* assert SRST and TRST */
- /* system would get ouf sync if we didn't reset test-logic, too */
- jtag_add_reset(1, 1);
-
- jtag_add_sleep(5000);
-
/* here we should issue a srst only, but we may have to assert trst as well */
if (jtag_reset_config & RESET_SRST_PULLS_TRST)
{
LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
return ERROR_TARGET_FAILURE;
}
+ else
+ {
+ /* we came here in a reset_halt or reset_init sequence
+ * debug entry was already prepared in arm7_9_prepare_reset_halt()
+ */
+ target->debug_reason = DBG_REASON_DBGRQ;
+
+ return ERROR_OK;
+ }
}
if (arm7_9->use_dbgrq)
int handle_target_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_daemon_startup_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_targets_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_target_script_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
"little endian",
};
-enum daemon_startup_mode startup_mode = DAEMON_ATTACH;
-
static int target_continous_poll = 1;
/* read a u32 from a buffer in target memory endianness */
jtag->speed(jtag_speed);
+ if ((retval = jtag_init_reset(cmd_ctx)) != ERROR_OK)
+ return retval;
+
+
/* prepare reset_halt where necessary */
target = targets;
while (target)
return ERROR_OK;
}
-int target_init_reset(struct command_context_s *cmd_ctx)
-{
- if (startup_mode == DAEMON_RESET)
- target_process_reset(cmd_ctx);
-
- return ERROR_OK;
-}
-
int target_register_event_callback(int (*callback)(struct target_s *target, enum target_event event, void *priv), void *priv)
{
target_event_callback_t **callbacks_p = &target_event_callbacks;
{
register_command(cmd_ctx, NULL, "target", handle_target_command, COMMAND_CONFIG, "target <cpu> [reset_init default - DEPRECATED] <chainpos> <endianness> <variant> [cpu type specifc args]");
register_command(cmd_ctx, NULL, "targets", handle_targets_command, COMMAND_EXEC, NULL);
- register_command(cmd_ctx, NULL, "daemon_startup", handle_daemon_startup_command, COMMAND_CONFIG, NULL);
register_command(cmd_ctx, NULL, "target_script", handle_target_script_command, COMMAND_CONFIG, NULL);
register_command(cmd_ctx, NULL, "run_and_halt_time", handle_run_and_halt_time_command, COMMAND_CONFIG, "<target> <run time ms>");
register_command(cmd_ctx, NULL, "working_area", handle_working_area_command, COMMAND_ANY, "working_area <target#> <address> <size> <'backup'|'nobackup'> [virtual address]");
return handle_wait_halt_command(cmd_ctx, cmd, args, argc);
}
-/* what to do on daemon startup */
-int handle_daemon_startup_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 1)
- {
- if (strcmp(args[0], "attach") == 0)
- {
- startup_mode = DAEMON_ATTACH;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "reset") == 0)
- {
- startup_mode = DAEMON_RESET;
- return ERROR_OK;
- }
- }
-
- LOG_WARNING("invalid daemon_startup configuration directive: %s", args[0]);
- return ERROR_OK;
-
-}
int handle_soft_reset_halt_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
extern char *target_state_strings[];
-enum daemon_startup_mode
-{
- DAEMON_ATTACH, /* simply attach to the target */
- DAEMON_RESET, /* reset target (behaviour defined by reset_mode */
-};
-
-extern enum daemon_startup_mode startup_mode;
-
enum target_reset_mode
{
RESET_RUN = 0, /* reset and let target run */
* assert_reset() can therefore make no assumptions whatsoever about the
* state of the target
*
+ * Before assert_reset() for the target is invoked, a TRST/tms and
+ * chain validation is executed. TRST should not be asserted
+ * during target assert unless there is no way around it due to
+ * the way reset's are configured.
+ *
*/
int (*assert_reset)(struct target_s *target);
int (*deassert_reset)(struct target_s *target);
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
+#LPCs need reset pulled while RTCK is log. 0 to activate JTAG, power-on reset is not enough
+jtag_reset 1 1
+jtag_reset 0 0
+
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
Code Review / openocd.git / commitdiff