{
int result;
- if (speed <= JLINK_MAX_SPEED)
+ if (speed > JLINK_MAX_SPEED)
{
- /* check for RTCK setting */
- if (speed == 0)
- speed = -1;
+ LOG_INFO("Ignoring speed request: %dkHz exceeds %dkHz maximum",
+ speed, JLINK_MAX_SPEED);
+ return ERROR_OK;
+ }
- usb_out_buffer[0] = EMU_CMD_SET_SPEED;
- usb_out_buffer[1] = (speed >> 0) & 0xff;
- usb_out_buffer[2] = (speed >> 8) & 0xff;
+ /* check for RTCK setting */
+ if (speed == 0)
+ speed = -1;
- result = jlink_usb_write(jlink_jtag_handle, 3);
+ usb_out_buffer[0] = EMU_CMD_SET_SPEED;
+ usb_out_buffer[1] = (speed >> 0) & 0xff;
+ usb_out_buffer[2] = (speed >> 8) & 0xff;
- if (result == 3)
- {
- return ERROR_OK;
- }
- else
- {
- LOG_ERROR("J-Link setting speed failed (%d)", result);
- return ERROR_JTAG_DEVICE_ERROR;
- }
- }
- else
+ result = jlink_usb_write(jlink_jtag_handle, 3);
+ if (result != 3)
{
- LOG_INFO("Requested speed %dkHz exceeds maximum of %dkHz, ignored", speed, JLINK_MAX_SPEED);
+ LOG_ERROR("J-Link setting speed failed (%d)", result);
+ return ERROR_JTAG_DEVICE_ERROR;
}
return ERROR_OK;
int result;
jlink_simple_command(EMU_CMD_GET_STATE);
- result = jlink_usb_read(jlink_jtag_handle, 8);
- if (result == 8)
- {
- int vref = usb_in_buffer[0] + (usb_in_buffer[1] << 8);
- LOG_INFO("Vref = %d.%d TCK = %d TDI = %d TDO = %d TMS = %d SRST = %d TRST = %d\n", \
- vref / 1000, vref % 1000, \
- usb_in_buffer[2], usb_in_buffer[3], usb_in_buffer[4], \
- usb_in_buffer[5], usb_in_buffer[6], usb_in_buffer[7]);
-
- if (vref < 1500)
- {
- LOG_ERROR("Vref too low. Check Target Power\n");
- }
- }
- else
+ result = jlink_usb_read(jlink_jtag_handle, 8);
+ if (result != 8)
{
LOG_ERROR("J-Link command EMU_CMD_GET_STATE failed (%d)\n", result);
+ return ERROR_JTAG_DEVICE_ERROR;
}
+ int vref = usb_in_buffer[0] + (usb_in_buffer[1] << 8);
+ LOG_INFO("Vref = %d.%d TCK = %d TDI = %d TDO = %d TMS = %d SRST = %d TRST = %d\n", \
+ vref / 1000, vref % 1000, \
+ usb_in_buffer[2], usb_in_buffer[3], usb_in_buffer[4], \
+ usb_in_buffer[5], usb_in_buffer[6], usb_in_buffer[7]);
+
+ if (vref < 1500)
+ LOG_ERROR("Vref too low. Check Target Power\n");
+
return ERROR_OK;
}
static int jlink_get_version_info(void)
{
int result;
- int len = 0;
+ int len;
/* query hardware version */
jlink_simple_command(EMU_CMD_VERSION);
- result = jlink_usb_read(jlink_jtag_handle, 2);
- if (result == 2)
+ result = jlink_usb_read(jlink_jtag_handle, 2);
+ if (2 != result)
{
- len = buf_get_u32(usb_in_buffer, 0, 16);
- result = jlink_usb_read(jlink_jtag_handle, len);
+ LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)\n",
+ result);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
- if (result == len)
- {
- usb_in_buffer[result] = 0;
- LOG_INFO("%s", (char *)usb_in_buffer);
- return ERROR_OK;
- }
+ len = buf_get_u32(usb_in_buffer, 0, 16);
+ result = jlink_usb_read(jlink_jtag_handle, len);
+ if (result != len)
+ {
+ LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)\n",
+ result);
+ return ERROR_JTAG_DEVICE_ERROR;
}
- LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)\n", result);
- return ERROR_JTAG_DEVICE_ERROR;
+ usb_in_buffer[result] = 0;
+ LOG_INFO("%s", (char *)usb_in_buffer);
+
+ return ERROR_OK;
}
static int jlink_handle_jlink_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
/* 2048 is the max value we can use here */
#define JLINK_TAP_BUFFER_SIZE 2048
-static int tap_length;
+static unsigned tap_length;
static u8 tms_buffer[JLINK_TAP_BUFFER_SIZE];
static u8 tdi_buffer[JLINK_TAP_BUFFER_SIZE];
static u8 tdo_buffer[JLINK_TAP_BUFFER_SIZE];
last_tms = tms;
int index = tap_length / 8;
- if (index < JLINK_TAP_BUFFER_SIZE)
+ if (index >= JLINK_TAP_BUFFER_SIZE)
{
- int bit_index = tap_length % 8;
- u8 bit = 1 << bit_index;
+ LOG_ERROR("jlink_tap_append_step: overflow");
+ exit(-1);
+ }
- if (tms)
- {
- tms_buffer[index] |= bit;
- }
- else
- {
- tms_buffer[index] &= ~bit;
- }
+ int bit_index = tap_length % 8;
+ u8 bit = 1 << bit_index;
- if (tdi)
- {
- tdi_buffer[index] |= bit;
- }
- else
- {
- tdi_buffer[index] &= ~bit;
- }
+ if (tms)
+ tms_buffer[index] |= bit;
+ else
+ tms_buffer[index] &= ~bit;
- tap_length++;
- }
+ if (tdi)
+ tdi_buffer[index] |= bit;
else
- {
- LOG_ERROR("jlink_tap_append_step, overflow");
- }
+ tdi_buffer[index] &= ~bit;
+
+ tap_length++;
}
static void jlink_tap_append_scan(int length, u8 *buffer, scan_command_t *command)
{
- pending_scan_result_t *pending_scan_result = &pending_scan_results_buffer[pending_scan_results_length];
+ pending_scan_result_t *pending_scan_result =
+ &pending_scan_results_buffer[pending_scan_results_length];
int i;
pending_scan_result->first = tap_length;
for (i = 0; i < length; i++)
{
- jlink_tap_append_step((i < length-1 ? 0 : 1), (buffer[i/8] >> (i%8)) & 1);
+ int tms = i < length - 1 ? 0 : 1;
+ int tdi = buffer[i / 8] & (1 << (i % 8));
+ jlink_tap_append_step(tms, tdi);
}
pending_scan_results_length++;
}
int i;
int result;
- if (tap_length > 0)
+ if (!tap_length)
+ return ERROR_OK;
+
+ /* Pad last byte so that tap_length is divisible by 8 */
+ while (tap_length % 8 != 0)
{
- /* Pad last byte so that tap_length is divisible by 8 */
- while (tap_length % 8 != 0)
- {
- /* More of the last TMS value keeps us in the same state,
- * analogous to free-running JTAG interfaces. */
- jlink_tap_append_step(last_tms, 0);
- }
+ /* More of the last TMS value keeps us in the same state,
+ * analogous to free-running JTAG interfaces. */
+ jlink_tap_append_step(last_tms, 0);
+ }
- byte_length = tap_length / 8;
+ byte_length = tap_length / 8;
- usb_out_buffer[0] = EMU_CMD_HW_JTAG3;
- usb_out_buffer[1] = 0;
- usb_out_buffer[2] = (tap_length >> 0) & 0xff;
- usb_out_buffer[3] = (tap_length >> 8) & 0xff;
+ usb_out_buffer[0] = EMU_CMD_HW_JTAG3;
+ usb_out_buffer[1] = 0;
+ usb_out_buffer[2] = (tap_length >> 0) & 0xff;
+ usb_out_buffer[3] = (tap_length >> 8) & 0xff;
- tms_offset = 4;
- for (i = 0; i < byte_length; i++)
- {
- usb_out_buffer[tms_offset + i] = tms_buffer[i];
- }
+ tms_offset = 4;
+ for (i = 0; i < byte_length; i++)
+ {
+ usb_out_buffer[tms_offset + i] = tms_buffer[i];
+ }
- tdi_offset = tms_offset + byte_length;
- for (i = 0; i < byte_length; i++)
- {
- usb_out_buffer[tdi_offset + i] = tdi_buffer[i];
- }
+ tdi_offset = tms_offset + byte_length;
+ for (i = 0; i < byte_length; i++)
+ {
+ usb_out_buffer[tdi_offset + i] = tdi_buffer[i];
+ }
- result = jlink_usb_message(jlink_jtag_handle, 4 + 2 * byte_length, byte_length);
+ result = jlink_usb_message(jlink_jtag_handle, 4 + 2 * byte_length, byte_length);
- if (result == byte_length)
- {
- for (i = 0; i < byte_length; i++)
- {
- tdo_buffer[i] = usb_in_buffer[i];
- }
+ if (result != byte_length)
+ {
+ LOG_ERROR("jlink_tap_execute, wrong result %d (expected %d)",
+ result, byte_length);
+ return ERROR_JTAG_QUEUE_FAILED;
+ }
- for (i = 0; i < pending_scan_results_length; i++)
- {
- pending_scan_result_t *pending_scan_result = &pending_scan_results_buffer[i];
- u8 *buffer = pending_scan_result->buffer;
- int length = pending_scan_result->length;
- int first = pending_scan_result->first;
- scan_command_t *command = pending_scan_result->command;
+ for (i = 0; i < byte_length; i++)
+ tdo_buffer[i] = usb_in_buffer[i];
+
+ for (i = 0; i < pending_scan_results_length; i++)
+ {
+ pending_scan_result_t *pending_scan_result = &pending_scan_results_buffer[i];
+ u8 *buffer = pending_scan_result->buffer;
+ int length = pending_scan_result->length;
+ int first = pending_scan_result->first;
+ scan_command_t *command = pending_scan_result->command;
- /* Copy to buffer */
- buf_set_buf(tdo_buffer, first, buffer, 0, length);
+ /* Copy to buffer */
+ buf_set_buf(tdo_buffer, first, buffer, 0, length);
- DEBUG_JTAG_IO("pending scan result, length = %d", length);
+ DEBUG_JTAG_IO("pending scan result, length = %d", length);
#ifdef _DEBUG_USB_COMMS_
- jlink_debug_buffer(buffer, byte_length);
+ jlink_debug_buffer(buffer, byte_length);
#endif
- if (jtag_read_buffer(buffer, command) != ERROR_OK)
- {
- jlink_tap_init();
- return ERROR_JTAG_QUEUE_FAILED;
- }
-
- if (pending_scan_result->buffer != NULL)
- {
- free(pending_scan_result->buffer);
- }
- }
- }
- else
+ if (jtag_read_buffer(buffer, command) != ERROR_OK)
{
- LOG_ERROR("jlink_tap_execute, wrong result %d, expected %d", result, byte_length);
+ jlink_tap_init();
return ERROR_JTAG_QUEUE_FAILED;
}
- jlink_tap_init();
+ if (pending_scan_result->buffer != NULL)
+ {
+ free(pending_scan_result->buffer);
+ }
}
+ jlink_tap_init();
+
return ERROR_OK;
}
int result2;
result = jlink_usb_write(jlink_jtag, out_length);
- if (result == out_length)
+ if (result != out_length)
{
- result = jlink_usb_read(jlink_jtag, in_length);
- if (result == in_length || result == in_length+1)
- {
- if (result == in_length)
- {
- /* Must read the result from the EMU too */
- result2 = jlink_usb_read_emu_result(jlink_jtag);
- if (1 == result2)
- {
- /* Check the result itself */
- if (0 == usb_emu_result_buffer[0])
- {
- return result;
- }
- else
- {
- LOG_ERROR("jlink_usb_read_emu_result (requested=0, result=%d)", usb_emu_result_buffer[0]);
- return -1;
- }
- }
- else
- {
- LOG_ERROR("jlink_usb_read_emu_result len (requested=1, result=%d)", result2);
- return -1;
- }
- }
- else
- {
- /* Check the result itself */
- if (0 == usb_in_buffer[result-1])
- {
- return result-1;
- }
- else
- {
- LOG_ERROR("jlink_usb_read_emu_result (requested=0, result=%d)", usb_in_buffer[result]);
- return -1;
- }
- }
- }
- else
+ LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)",
+ out_length, result);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ result = jlink_usb_read(jlink_jtag, in_length);
+ if ((result != in_length) && (result != in_length + 1))
+ {
+ LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)",
+ in_length, result);
+ return ERROR_JTAG_DEVICE_ERROR;
+ }
+
+ if (result == in_length)
+ {
+ /* Must read the result from the EMU too */
+ result2 = jlink_usb_read_emu_result(jlink_jtag);
+ if (1 != result2)
{
- LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)", in_length, result);
- return -1;
+ LOG_ERROR("jlink_usb_read_emu_result failed "
+ "(requested=1, result=%d)", result2);
+ return ERROR_JTAG_DEVICE_ERROR;
}
+
+ /* Check the result itself */
+ result2 = usb_emu_result_buffer[0];
}
else
{
- LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)", out_length, result);
- return -1;
+ /* Save the result, then remove it from return value */
+ result2 = usb_in_buffer[result--];
+ }
+
+ if (result2)
+ {
+ LOG_ERROR("jlink_usb_message failed with result=%d)", result2);
+ return ERROR_JTAG_DEVICE_ERROR;
}
+
+ return result;
}
/* calls the given usb_bulk_* function, allowing for the data to trickle in with some timeouts */
Code Review / openocd.git / commitdiff