The target library is now the authorotative source of config examples

git-svn-id: svn://svn.berlios.de/openocd/trunk@642 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/doc/configs/arm7_ft2232.cfg b/doc/configs/arm7_ft2232.cfg
deleted file mode 100644 (file)
index 3dadb0a..0000000
--- a/doc/configs/arm7_ft2232.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 2
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-target_script 0 reset h2294_init.script
-run_and_halt_time 0 30
-working_area 0 0x40000000 0x40000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
-flash bank cfi 0x80000000 0x400000 2 2 0

diff --git a/doc/configs/arm7_wig.cfg b/doc/configs/arm7_wig.cfg
deleted file mode 100644 (file)
index c1e6bf9..0000000
--- a/doc/configs/arm7_wig.cfg
+++ /dev/null
@@ -1,28 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface parport
-parport_port 0x378
-parport_cable wiggler
-jtag_speed 0
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-target_script 0 reset h2294_init.script
-run_and_halt_time 0 30
-working_area 0 0x40000000 0x40000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
-flash bank cfi 0x80000000 0x400000 2 2 0

diff --git a/doc/configs/arm9_ft2232.cfg b/doc/configs/arm9_ft2232.cfg
deleted file mode 100644 (file)
index 732ceba..0000000
--- a/doc/configs/arm9_ft2232.cfg
+++ /dev/null
@@ -1,28 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout "jtagkey"
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 1
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <endianess> <reset mode>
-target arm9tdmi little reset_halt 0 arm920t
-working_area 0 0x200000 0x4000 backup
-run_and_halt_time 0 5000
-
-#flash configuration
-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x10000000 0x800000 2 2 0
-

diff --git a/doc/configs/at91sam7_ecr.cfg b/doc/configs/at91sam7_ecr.cfg
deleted file mode 100644 (file)
index 71e2644..0000000
--- a/doc/configs/at91sam7_ecr.cfg
+++ /dev/null
@@ -1,25 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface at91rm9200
-at91rm9200_device rea_ecr
-jtag_speed 0
-reset_config srst_only
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little reset_halt 0 arm7tdmi
-target_script 0 reset at91sam7_ecr.script
-working_area 0 0x00200000 0x2000 nobackup
-
-#flash configuration
-flash bank at91sam7 0 0 0 0 0

diff --git a/doc/configs/chameleon.cfg b/doc/configs/chameleon.cfg
deleted file mode 100644 (file)
index 94d581c..0000000
--- a/doc/configs/chameleon.cfg
+++ /dev/null
@@ -1,12 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface parport
-parport_cable chameleon
-jtag_speed 0
-
-#jtag scan chain
-# format    L IRC  IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 5 0x01 0x1f 0x01

diff --git a/doc/configs/fury_ft2232.cfg b/doc/configs/fury_ft2232.cfg
deleted file mode 100644 (file)
index 5aa0089..0000000
--- a/doc/configs/fury_ft2232.cfg
+++ /dev/null
@@ -1,28 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Stellaris Evaluation Board A"
-ft2232_layout evb_lm3s811
-ft2232_vid_pid 0x0403 0xbcd9
-jtag_speed 40
-#LM3S811 Evaluation Board has only srst
-reset_config srst_only separate
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup attach
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target cortex_m3 little run_and_halt 0
-# 4k working area at base of ram
-working_area 0 0x20000800 0x1200 nobackup
-#target_script 0 reset ../doc/scripts/evb_lm3s811_test.script 
-
-#flash configuration
-flash bank stellaris 0 0 0 0 0

diff --git a/doc/configs/usbprog.cfg b/doc/configs/usbprog.cfg
deleted file mode 100644 (file)
index fa434dd..0000000
--- a/doc/configs/usbprog.cfg
+++ /dev/null
@@ -1,26 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface usbprog
-jtag_speed 2
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-working_area 0 0x40000000 0x40000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
-flash bank cfi 0x80000000 0x400000 2 2 0

diff --git a/doc/configs/xscale_ixp42x.cfg b/doc/configs/xscale_ixp42x.cfg
deleted file mode 100644 (file)
index 26cccd5..0000000
--- a/doc/configs/xscale_ixp42x.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-#--- Daemon configuration ------------------------
-telnet_port 4444
-gdb_port 3333
-daemon_startup reset
-
-#--- JTAG interface configuration ----------------
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-#-- Reset options available
-reset_config trst_and_srst
-
-#-- jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 7 0x1 0x7f 0x7e
-
-
-#--- Target Configuration ------------------------
-
-#target <type> <endianess> <startup mode> <jtagpos> <variant>
-#target xscale big reset_init 0 IXP42x
-target xscale big reset_halt 0 IXP42x
-
-target_script 0 reset uc7420-rb.ocd
-
-run_and_halt_time 0 2500
-working_area 0 0x00100000 0x00010000 nobackup
-
-flash bank cfi 0x50000000 0x01000000 2 2 0
-flash bank cfi 0x51000000 0x01000000 2 2 0
-
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
-

diff --git a/doc/scripts/at91sam7_ecr.script b/doc/scripts/at91sam7_ecr.script
deleted file mode 100644 (file)
index f575e57..0000000
--- a/doc/scripts/at91sam7_ecr.script
+++ /dev/null
@@ -1,10 +0,0 @@
-mww 0xfffffd44 0x00008000      # disable watchdog
-mww 0xfffffd08 0xa5000001      # enable user reset
-mww 0xfffffc20 0x00000601      # CKGR_MOR : enable the main oscillator
-sleep 10
-mww 0xfffffc2c 0x12560a64      # CKGR_PLLR: 119.8MHz (DIV=100,MUL=598+1)
-sleep 10
-mww 0xfffffc30 0x00000007      # PMC_MCKR : MCK = PLL / 2 = 59.9MHz
-sleep 10
-mww 0xffffff60 0x003c0100      # MC_FMR: flash mode (FWS=1,FMCN=60)
-arm7_9 force_hw_bkpts enable   # program resides in flash

diff --git a/doc/scripts/tms470r1a288_startup.script b/doc/scripts/tms470r1a288_startup.script
deleted file mode 100644 (file)
index 18b8aee..0000000
--- a/doc/scripts/tms470r1a288_startup.script
+++ /dev/null
@@ -1,9 +0,0 @@
-# Resets and unlocks the MSM of TMS470R1A288 (an others with an MSM).
-# Assumes default MSM keys (all 0xFFFFFFFF).
-#
-resume
-jtag_reset 0 1
-halt
-jtag_reset 0 0
-poll                   # hack-ish, but effective version of 'reset halt'
-mdw 0x1fe0 4           # unlock MSM

diff --git a/doc/scripts/xscale_ixp_startup.script b/doc/scripts/xscale_ixp_startup.script
deleted file mode 100644 (file)
index 268055a..0000000
--- a/doc/scripts/xscale_ixp_startup.script
+++ /dev/null
@@ -1,36 +0,0 @@
-#---------------------------------------------------------------------
-#-- OpenOCD Reset Init Script for IXP42x box with RedBoot
-#---------------------------------------------------------------------
-
-#debug 3
-
-#- Let U-Boot setup the box ------------------------------------------
-poll
-resume 0x40
-sleep 2000
-halt
-wait_halt 20
-
-#- Reverse RedBoot crap ----------------------------------------------
-xscale icache disable
-xscale dcache disable
-xscale mmu disable
-
-#- Check for flash ---------------------------------------------------
-flash banks
-flash probe 0
-flash probe 1
-#flash protect_check 0
-#flash protect_check 1
-#flash erase_check 0
-#flash erase_check 1
-#flash info 0
-#flash info 1
-
-#- Bootloader --------------------------------------------------------
-#flash erase 0 0 2
-#flash write 0 //devboc/homes/src/denx/u-boot-git/u-boot.bin 0x00000 bin
-
-#- Kernel Image ------------------------------------------------------
-#flash erase 0 3 23
-#flash write 0 //devbox/homes/src/pengutronics/ptxdist-project/images/linuximage 0x60000 bin

diff --git a/src/target/Makefile.am b/src/target/Makefile.am
index 05a395efb77f78904b6b215e744bc04bdccd661d..c90f54102fe0b7b377d8e52ff968d345cfa99d8a 100644 (file)
--- a/src/target/Makefile.am
+++ b/src/target/Makefile.am
@@ -31,4 +31,5 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script
        target/str730.cfg target/stm32stick.cfg event/str912_reset.script event/str710_program.script \
        target/lm3s811.cfg interface/luminary.cfg interface/luminary-lm3s811.cfg interface/stm32-stick.cfg \
        interface/calao-usb-a9260-c01.cfg interface/calao-usb-a9260-c02.cfg \
        target/str730.cfg target/stm32stick.cfg event/str912_reset.script event/str710_program.script \
        target/lm3s811.cfg interface/luminary.cfg interface/luminary-lm3s811.cfg interface/stm32-stick.cfg \
        interface/calao-usb-a9260-c01.cfg interface/calao-usb-a9260-c02.cfg \

-       interface/calao-usb-a9260.cfg target/at91sam9260minimal.cfg  event/lpc2148_reset.script
+       interface/calao-usb-a9260.cfg target/at91sam9260minimal.cfg  event/lpc2148_reset.script \
+       interface/chameleon.cfg interface/at91rm9200.cfg

diff --git a/src/target/interface/at91rm9200.cfg b/src/target/interface/at91rm9200.cfg
new file mode 100644 (file)
index 0000000..27ff741
--- /dev/null
+++ b/src/target/interface/at91rm9200.cfg
@@ -0,0 +1,3 @@
+#interface\r
+interface at91rm9200\r
+at91rm9200_device rea_ecr\r

diff --git a/src/target/interface/chameleon.cfg b/src/target/interface/chameleon.cfg
new file mode 100644 (file)
index 0000000..b883e28
--- /dev/null
+++ b/src/target/interface/chameleon.cfg
@@ -0,0 +1,4 @@
+#interface
+interface parport
+parport_cable chameleon
+