Jesus Sanchez-Palencia <jesus.palencia@openbossa.org>

git-svn-id: svn://svn.berlios.de/openocd/trunk@1461 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/target/lpc2124.cfg b/src/target/target/lpc2124.cfg
new file mode 100644 (file)
index 0000000..f8d7e8f
--- /dev/null
+++ b/src/target/target/lpc2124.cfg
@@ -0,0 +1,38 @@
+#LPC-2124 CPU\r
+\r
+if { [info exists CHIPNAME] } {\r
+   set  _CHIPNAME $CHIPNAME\r
+} else {\r
+   set  _CHIPNAME lpc2124\r
+}\r
+\r
+if { [info exists ENDIAN] } {\r
+   set  _ENDIAN $ENDIAN\r
+} else {\r
+   set  _ENDIAN little\r
+}\r
+\r
+if { [info exists CPUTAPID ] } {\r
+   set _CPUTAPID $CPUTAPID\r
+} else {\r
+  # force an error till we get a good number\r
+    set _CPUTAPID 0x4f1f0f0f\r
+}\r
+\r
+\r
+#use combined on interfaces or targets that can't set TRST/SRST separately\r
+reset_config trst_and_srst srst_pulls_trst\r
+jtag_nsrst_delay 10\r
+jtag_khz 1000\r
+\r
+#jtag scan chain\r
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID\r
+\r
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]\r
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4\r
+\r
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0\r
+\r
+\r
+#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum\r