flash/nor: avrf: support atmega128rfa1

Tested with a Dresden Elektronik deRFmega128 module.

Change-Id: I91da3b11b60e78755360b08453ed368d6d396651
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-on: http://openocd.zylin.com/2790
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>

diff --git a/src/flash/nor/avrf.c b/src/flash/nor/avrf.c
index 627418c63770a45b2f1bbd8840015bac033ea031..11cc3b2d329fe8b0415368352d453b21d05a90c8 100644 (file)
--- a/src/flash/nor/avrf.c
+++ b/src/flash/nor/avrf.c
@@ -66,6 +66,7 @@ static const struct avrf_type avft_chips_info[] = {
  *                     eeprom_page_size, eeprom_page_num
  */
        {"atmega128", 0x9702, 256, 512, 8, 512},
+       {"atmega128rfa1", 0xa701, 128, 512, 8, 512},
        {"at90can128", 0x9781, 256, 512, 8, 512},
        {"at90usb128", 0x9782, 256, 512, 8, 512},
        {"atmega164p", 0x940a, 128, 128, 4, 128},

diff --git a/tcl/target/atmega128rfa1.cfg b/tcl/target/atmega128rfa1.cfg
new file mode 100644 (file)
index 0000000..2c12a61
--- /dev/null
+++ b/tcl/target/atmega128rfa1.cfg
@@ -0,0 +1,22 @@
+set _CHIPNAME avr
+set _ENDIAN little
+
+# jtag speed
+adapter_khz 4500
+
+# avr jtag docs never connect RSTN
+reset_config none
+
+#jtag scan chain
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x0a70103f
+}
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME avr 0 0 0 0 $_TARGETNAME