use jtag_rclk 500 to avoid proliferation of target scripts

git-svn-id: svn://svn.berlios.de/openocd/trunk@1574 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/target/lpc2148.cfg b/src/target/target/lpc2148.cfg
index a728195ceb8701ead9073cb7b11ce4b872f51db4..32ae0af4f4e7e6b76f6041913c31be13ae08c435 100644 (file)
--- a/src/target/target/lpc2148.cfg
+++ b/src/target/target/lpc2148.cfg
@@ -1,3 +1,8 @@
+# Use RCLK. If RCLK is not available fall back to 500kHz. 
+# 
+# Depending on cabling you might be able to eek this up to 2000kHz.
+jtag_rclk 500
+
 if { [info exists CHIPNAME] } {        
    set _CHIPNAME $CHIPNAME
 } else {

diff --git a/src/target/target/lpc2148_2mhz.cfg b/src/target/target/lpc2148_2mhz.cfg
deleted file mode 100644 (file)
index 0ed87ca..0000000
--- a/src/target/target/lpc2148_2mhz.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-# 2MHz
-jtag_khz 2000
-script target/lpc2148.cfg
-

diff --git a/src/target/target/lpc2148_rclk.cfg b/src/target/target/lpc2148_rclk.cfg
deleted file mode 100644 (file)
index dd7330f..0000000
--- a/src/target/target/lpc2148_rclk.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-# RCLK
-jtag_khz 0
-script target/lpc2148.cfg
-