Add support for Hilscher netX controllers

[openocd.git] / tcl / target / xba_revA3.cfg

diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg
index 8ff5be9373ea66ead57c1d286dd2cc1fe5a8aa6b..71e7353d313e29faddf5a2cee85b6c3cfeb4549c 100644 (file)
--- a/tcl/target/xba_revA3.cfg
+++ b/tcl/target/xba_revA3.cfg
@@ -35,36 +35,36 @@ $_TARGETNAME configure -event reset-init {
        #############################################################################
        # setup expansion bus CS, disable external wdt
        #############################################################################
-       mww 0xc4000000  0xbd113842  #CS0  : Flash, write enabled @0x50000000
-       mww 0xc4000004  0x94d10013  #CS1
-       mww 0xc4000008  0x95960003  #CS2
-       mww 0xc400000c  0x00000000  #CS3
-       mww 0xc4000010  0x80900003  #CS4
-       mww 0xc4000014  0x9d520003  #CS5
-       mww 0xc4000018  0x81860001  #CS6
-       mww 0xc400001c  0x80900003  #CS7
+       mww 0xc4000000  0xbd113842  ;#CS0  : Flash, write enabled @0x50000000
+       mww 0xc4000004  0x94d10013  ;#CS1
+       mww 0xc4000008  0x95960003  ;#CS2
+       mww 0xc400000c  0x00000000  ;#CS3
+       mww 0xc4000010  0x80900003  ;#CS4
+       mww 0xc4000014  0x9d520003  ;#CS5
+       mww 0xc4000018  0x81860001  ;#CS6
+       mww 0xc400001c  0x80900003  ;#CS7
 
        #############################################################################
        # init SDRAM controller: 16MB, one bank, CL3
        #############################################################################
-       mww 0xCC000000  0x2A # SDRAM_CFG: 64MBit, CL3
-       mww 0xCC000004     0 # disable refresh
-       mww 0xCC000008     3 # NOP
+       mww 0xCC000000  0x2A ;# SDRAM_CFG: 64MBit, CL3
+       mww 0xCC000004     0 ;# disable refresh
+       mww 0xCC000008     3 ;# NOP
        sleep 100
-       mww 0xCC000004  2100 # set refresh counter
-       mww 0xCC000008     2 # Precharge All Banks
+       mww 0xCC000004  2100 ;# set refresh counter
+       mww 0xCC000008     2 ;# Precharge All Banks
        sleep 100
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     4 # Auto Refresh
-       mww 0xCC000008     1 # Mode Select CL3
-
-       #mww 0xc4000020  0xffffee # CFG0: remove expansion bus boot flash
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     4 ;# Auto Refresh
+       mww 0xCC000008     1 ;# Mode Select CL3
+
+       #mww 0xc4000020  0xffffee ;# CFG0: remove expansion bus boot flash
        #mirror at 0x00000000
 
        #big endian