AT91SAM4L: handle reset run/halt in SMAP

[openocd.git] / tcl / target / stm32_stlink.cfg

diff --git a/tcl/target/stm32_stlink.cfg b/tcl/target/stm32_stlink.cfg
index 4b8abebe07c815dc04c6b63ba82a9d635e51e38e..295292e3e50e401cfc8ec8ffdedb13bd32bb028e 100644 (file)
--- a/tcl/target/stm32_stlink.cfg
+++ b/tcl/target/stm32_stlink.cfg
@@ -1,48 +1 @@
-#
-# stm32 stlink pseudo target
-#
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME stm32f1x
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 16kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x4000
-}
-
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   # this is the SW-DP tap id not the jtag tap id
-   set _CPUTAPID 0x1ba01477
-}
-
-if { [info exists TRANSPORT] } {
-   set _TRANSPORT $TRANSPORT
-   if { $TRANSPORT == "stlink_jtag" } {
-      if { [info exists CPUTAPID] == 0 } {
-         # jtag requires us to use the jtag tap id
-         set _CPUTAPID 0x3ba00477
-      }
-   }
-} else {
-   set _TRANSPORT stlink_swd
-}
-
-#
-# possibles value are stlink_swd or stlink_jtag
-#
-transport select $_TRANSPORT
-
-stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+echo "WARNING: stm32_stlink.cfg is deprecated (and does nothing, you can safely remove it.)"