at91samd: add chip IDs for SAMC20 and SAMC21 families

[openocd.git] / tcl / board / dm355evm.cfg

diff --git a/tcl/board/dm355evm.cfg b/tcl/board/dm355evm.cfg
index bb745005c2fa7703b1e36db1acda63b0b6a3c4f1..0c971e9a0b06bc248614b718a9300270857fd58c 100644 (file)
--- a/tcl/board/dm355evm.cfg
+++ b/tcl/board/dm355evm.cfg
@@ -18,7 +18,7 @@ $_TARGETNAME configure -event reset-init { dm355evm_init }
 proc dm355evm_init {} {
        global dm355
 
-       puts "Initialize DM355 EVM board"
+       echo "Initialize DM355 EVM board"
 
        # CLKIN = 24 MHz ... can't talk quickly to ARM yet
        jtag_rclk 1500
@@ -117,7 +117,7 @@ proc dm355evm_init {} {
        mmw [expr $addr + 0x08] 0x00800000 0
        mmw [expr $addr + 0x08] 0x0013c632 0x03870fff
 
-       # SDTIMR, SDTIMR2
+       # SDTIMR0, SDTIMR1
        mww [expr $addr + 0x10] 0x2a923249
        mww [expr $addr + 0x14] 0x4c17c763
 
@@ -182,7 +182,7 @@ proc dm355evm_init {} {
        ########################
 
        # turn on icache - set I bit in cp15 register c1
-       arm926ejs cp15 0 0 1 0 0x00051078
+       arm mcr 15 0 0 1 0 0x00051078
 }
 
 # NAND -- socket has two chipselects, MT29F16G08FAA puts 1GByte on each one.
@@ -191,8 +191,10 @@ proc dm355evm_init {} {
 # you either (a) have 'new' DM355 chips, with boot ROMs that don't need to
 # use "hwecc4_infix" for the UBL; or else (b) aren't updating anything that
 # needs infix layout ... like an old UBL, old U-Boot, old MVL kernel, etc.
-nand device davinci 0 0x02000000 hwecc4 0x01e10000
-nand device davinci 0 0x02004000 hwecc4 0x01e10000
+set _FLASHNAME $_CHIPNAME.boot
+nand device $_FLASHNAME davinci $_TARGETNAME 0x02000000 hwecc4 0x01e10000
+set _FLASHNAME $_CHIPNAME.flash
+nand device $_FLASHNAME davinci $_TARGETNAME 0x02004000 hwecc4 0x01e10000
 
 # FIXME
 #  - support writing UBL with its header (new layout only with new ROMs)