* peter.hettkamp@htp-tel.de *
* *
* Copyright (C) 2009 SoftPLC Corporation. http://softplc.com *
- * dick@softplc.com *
+ * Dick Hollenbeck <dick@softplc.com> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
#define LCOUNT 0x19
#define LDELAY 0x1A
#define LSDR 0x1B
+#define XTRST 0x1C
/* XSVF valid state values for the XSTATE command, from appendix B of xapp503.pdf */
#define XSV_IREXIT2 0x0E
#define XSV_IRUPDATE 0x0F
+/* arguments to XTRST */
+#define XTRST_ON 0
+#define XTRST_OFF 1
+#define XTRST_Z 2
+#define XTRST_ABSENT 3
#define XSTATE_MAX_PATH 12
static int xsvf_fd = 0;
-/* map xsvf tap state to an openocd "enum tap_state" */
+/* map xsvf tap state to an openocd "tap_state_t" */
static tap_state_t xsvf_to_tap( int xsvf_state )
{
tap_state_t ret;
tap_state_t curstate = cmd_queue_cur_state;
int i;
- u8 move = TAP_MOVE(cmd_queue_cur_state, state);
+ u8 move = tap_get_tms_path(cmd_queue_cur_state, state);
if (state != TAP_RESET && state==cmd_queue_cur_state)
return;
int j = (move >> i) & 1;
if (j)
{
- curstate = tap_transitions[curstate].high;
+ curstate = tap_state_transition(curstate, true);
}
else
{
- curstate = tap_transitions[curstate].low;
+ curstate = tap_state_transition(curstate, false);
}
moves[i] = curstate;
}
int xsvf_register_commands(struct command_context_s *cmd_ctx)
{
register_command(cmd_ctx, NULL, "xsvf", handle_xsvf_command,
- COMMAND_EXEC, "run xsvf <file> [virt2]");
+ COMMAND_EXEC, "run xsvf <file> [virt2] [quiet]");
return ERROR_OK;
}
mystate = xsvf_to_tap(uc);
- LOG_DEBUG("XSTATE %02X %s", uc, jtag_state_name(mystate) );
+ LOG_DEBUG("XSTATE %02X %s", uc, tap_state_name(mystate) );
path[(*path_len)++] = mystate;
}
int unsupported = 0;
int tdo_mismatch = 0;
int result;
+ int verbose = 1;
+ char* filename;
int runtest_requires_tck = 0; /* a flag telling whether to clock TCK during waits, or simply sleep, controled by virt2 */
if (argc < 2)
{
- command_print(cmd_ctx, "usage: xsvf <device#|plain> <file> <variant>");
+ command_print(cmd_ctx, "usage: xsvf <device#|plain> <file> [<variant>] [quiet]");
return ERROR_FAIL;
}
+ filename = args[1]; /* we mess with args starting point below, snapshot filename here */
+
if (strcmp(args[0], "plain") != 0)
{
tap = jtag_TapByString( args[0] );
}
}
- if ((xsvf_fd = open(args[1], O_RDONLY)) < 0)
+ if ((xsvf_fd = open(filename, O_RDONLY)) < 0)
{
- command_print(cmd_ctx, "file \"%s\" not found", args[1]);
+ command_print(cmd_ctx, "file \"%s\" not found", filename);
return ERROR_FAIL;
}
if ((argc > 2) && (strcmp(args[2], "virt2") == 0))
{
runtest_requires_tck = 1;
+ --argc;
+ ++args;
}
- LOG_USER("xsvf processing file: \"%s\"", args[1]);
+ if ((argc > 2) && (strcmp(args[2], "quiet") == 0))
+ {
+ verbose = 0;
+ }
+
+ LOG_USER("xsvf processing file: \"%s\"", filename);
while( read(xsvf_fd, &opcode, 1) > 0 )
{
switch (opcode)
{
- case XCOMPLETE:
- LOG_DEBUG("XCOMPLETE");
+ case XCOMPLETE:
+ LOG_DEBUG("XCOMPLETE");
+
+ result = jtag_execute_queue();
+ if (result != ERROR_OK)
+ {
+ tdo_mismatch = 1;
+ break;
+ }
+ break;
+
+ case XTDOMASK:
+ LOG_DEBUG("XTDOMASK");
+ if (dr_in_mask && (xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_mask) != ERROR_OK))
+ do_abort = 1;
+ break;
+
+ case XRUNTEST:
+ {
+ u8 xruntest_buf[4];
- result = jtag_execute_queue();
- if (result != ERROR_OK)
+ if (read(xsvf_fd, xruntest_buf, 4) < 0)
{
- tdo_mismatch = 1;
+ do_abort = 1;
break;
}
- break;
- case XTDOMASK:
- LOG_DEBUG("XTDOMASK");
- if (dr_in_mask && (xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_mask) != ERROR_OK))
+ xruntest = be_to_h_u32(xruntest_buf);
+ LOG_DEBUG("XRUNTEST %d 0x%08X", xruntest, xruntest);
+ }
+ break;
+
+ case XREPEAT:
+ {
+ u8 myrepeat;
+
+ if (read(xsvf_fd, &myrepeat, 1) < 0)
do_abort = 1;
- break;
+ else
+ {
+ xrepeat = myrepeat;
+ LOG_DEBUG("XREPEAT %d", xrepeat );
+ }
+ }
+ break;
+
+ case XSDRSIZE:
+ {
+ u8 xsdrsize_buf[4];
+
+ if (read(xsvf_fd, xsdrsize_buf, 4) < 0)
+ {
+ do_abort = 1;
+ break;
+ }
+
+ xsdrsize = be_to_h_u32(xsdrsize_buf);
+ LOG_DEBUG("XSDRSIZE %d", xsdrsize);
+
+ if( dr_out_buf ) free(dr_out_buf);
+ if( dr_in_buf) free(dr_in_buf);
+ if( dr_in_mask) free(dr_in_mask);
- case XRUNTEST:
+ dr_out_buf = malloc((xsdrsize + 7) / 8);
+ dr_in_buf = malloc((xsdrsize + 7) / 8);
+ dr_in_mask = malloc((xsdrsize + 7) / 8);
+ }
+ break;
+
+ case XSDR: /* these two are identical except for the dr_in_buf */
+ case XSDRTDO:
+ {
+ int limit = xrepeat;
+ int matched = 0;
+ int attempt;
+
+ const char* op_name = (opcode == XSDR ? "XSDR" : "XSDRTDO");
+
+ if (xsvf_read_buffer(xsdrsize, xsvf_fd, dr_out_buf) != ERROR_OK)
{
- u8 xruntest_buf[4];
+ do_abort = 1;
+ break;
+ }
- if (read(xsvf_fd, xruntest_buf, 4) < 0)
+ if (opcode == XSDRTDO)
+ {
+ if(xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_buf) != ERROR_OK )
{
do_abort = 1;
break;
}
-
- xruntest = be_to_h_u32(xruntest_buf);
- LOG_DEBUG("XRUNTEST %d 0x%08X", xruntest, xruntest);
}
- break;
- case XREPEAT:
+ if (limit < 1)
+ limit = 1;
+
+ LOG_DEBUG("%s %d", op_name, xsdrsize);
+
+ for( attempt=0; attempt<limit; ++attempt )
{
- u8 myrepeat;
+ scan_field_t field;
- if (read(xsvf_fd, &myrepeat, 1) < 0)
- do_abort = 1;
- else
+ if( attempt>0 )
{
- xrepeat = myrepeat;
- LOG_DEBUG("XREPEAT %d", xrepeat );
+ /* perform the XC9500 exception handling sequence shown in xapp067.pdf and
+ illustrated in psuedo code at end of this file. We start from state
+ DRPAUSE:
+ go to Exit2-DR
+ go to Shift-DR
+ go to Exit1-DR
+ go to Update-DR
+ go to Run-Test/Idle
+
+ This sequence should be harmless for other devices, and it
+ will be skipped entirely if xrepeat is set to zero.
+ */
+
+ static tap_state_t exception_path[] = {
+ TAP_DREXIT2,
+ TAP_DRSHIFT,
+ TAP_DREXIT1,
+ TAP_DRUPDATE,
+ TAP_IDLE,
+ };
+
+ jtag_add_pathmove( sizeof(exception_path)/sizeof(exception_path[0]), exception_path);
+
+ if (verbose)
+ LOG_USER("%s mismatch, xsdrsize=%d retry=%d", op_name, xsdrsize, attempt);
}
- }
- break;
- case XSDRSIZE:
- {
- u8 xsdrsize_buf[4];
+ field.tap = tap;
+ field.num_bits = xsdrsize;
+ field.out_value = dr_out_buf;
+ field.out_mask = NULL;
+ field.in_value = NULL;
- if (read(xsvf_fd, xsdrsize_buf, 4) < 0)
+ jtag_set_check_value(&field, dr_in_buf, dr_in_mask, NULL);
+
+ if (tap == NULL)
+ jtag_add_plain_dr_scan(1, &field, TAP_DRPAUSE);
+ else
+ jtag_add_dr_scan(1, &field, TAP_DRPAUSE);
+
+ /* LOG_DEBUG("FLUSHING QUEUE"); */
+ result = jtag_execute_queue();
+ if (result == ERROR_OK)
{
- do_abort = 1;
+ matched = 1;
break;
}
+ }
- xsdrsize = be_to_h_u32(xsdrsize_buf);
- LOG_DEBUG("XSDRSIZE %d", xsdrsize);
+ if (!matched)
+ {
+ LOG_USER( "%s mismatch", op_name);
+ tdo_mismatch = 1;
+ break;
+ }
- if( dr_out_buf ) free(dr_out_buf);
- if( dr_in_buf) free(dr_in_buf);
- if( dr_in_mask) free(dr_in_mask);
+ /* See page 19 of XSVF spec regarding opcode "XSDR" */
+ if (xruntest)
+ {
+ xsvf_add_statemove(TAP_IDLE);
- dr_out_buf = malloc((xsdrsize + 7) / 8);
- dr_in_buf = malloc((xsdrsize + 7) / 8);
- dr_in_mask = malloc((xsdrsize + 7) / 8);
+ if (runtest_requires_tck)
+ jtag_add_clocks(xruntest);
+ else
+ jtag_add_sleep(xruntest);
}
- break;
+ else if (xendir != TAP_DRPAUSE) /* we are already in TAP_DRPAUSE */
+ xsvf_add_statemove(xenddr);
+ }
+ break;
- case XSDR: /* these two are identical except for the dr_in_buf */
- case XSDRTDO:
- {
- int limit = xrepeat;
- int matched = 0;
- int attempt;
+ case XSETSDRMASKS:
+ LOG_ERROR("unsupported XSETSDRMASKS\n");
+ unsupported = 1;
+ break;
- const char* op_name = (opcode == XSDR ? "XSDR" : "XSDRTDO");
+ case XSDRINC:
+ LOG_ERROR("unsupported XSDRINC\n");
+ unsupported = 1;
+ break;
- if (xsvf_read_buffer(xsdrsize, xsvf_fd, dr_out_buf) != ERROR_OK)
- {
- do_abort = 1;
- break;
- }
+ case XSDRB:
+ LOG_ERROR("unsupported XSDRB\n");
+ unsupported = 1;
+ break;
- if (opcode == XSDRTDO)
- {
- if(xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_buf) != ERROR_OK )
- {
- do_abort = 1;
- break;
- }
- }
+ case XSDRC:
+ LOG_ERROR("unsupported XSDRC\n");
+ unsupported = 1;
+ break;
- if (limit < 1)
- limit = 1;
+ case XSDRE:
+ LOG_ERROR("unsupported XSDRE\n");
+ unsupported = 1;
+ break;
- LOG_DEBUG("%s %d", op_name, xsdrsize);
+ case XSDRTDOB:
+ LOG_ERROR("unsupported XSDRTDOB\n");
+ unsupported = 1;
+ break;
- for( attempt=0; attempt<limit; ++attempt )
- {
- scan_field_t field;
+ case XSDRTDOC:
+ LOG_ERROR("unsupported XSDRTDOC\n");
+ unsupported = 1;
+ break;
- if( attempt>0 )
- {
- /* perform the XC9500 exception handling sequence shown in xapp067.pdf and
- illustrated in psuedo code at end of this file. We start from state
- DRPAUSE:
- go to Exit2-DR
- go to Shift-DR
- go to Exit1-DR
- go to Update-DR
- go to Run-Test/Idle
-
- This sequence should be harmless for other devices, and it
- will be skipped entirely if xrepeat is set to zero.
- */
-
- static tap_state_t exception_path[] = {
- TAP_DREXIT2,
- TAP_DRSHIFT,
- TAP_DREXIT1,
- TAP_DRUPDATE,
- TAP_IDLE,
- };
-
- jtag_add_pathmove( sizeof(exception_path)/sizeof(exception_path[0]), exception_path);
-
- LOG_USER("%s %d retry %d", op_name, xsdrsize, attempt);
- }
+ case XSDRTDOE:
+ LOG_ERROR("unsupported XSDRTDOE\n");
+ unsupported = 1;
+ break;
- field.tap = tap;
- field.num_bits = xsdrsize;
- field.out_value = dr_out_buf;
- field.out_mask = NULL;
- field.in_value = NULL;
+ case XSTATE:
+ {
+ tap_state_t mystate;
+ tap_state_t* path;
+ int path_len;
- jtag_set_check_value(&field, dr_in_buf, dr_in_mask, NULL);
+ if (read(xsvf_fd, &uc, 1) < 0)
+ {
+ do_abort = 1;
+ break;
+ }
- if (tap == NULL)
- jtag_add_plain_dr_scan(1, &field, TAP_DRPAUSE);
- else
- jtag_add_dr_scan(1, &field, TAP_DRPAUSE);
+ mystate = xsvf_to_tap(uc);
- /* LOG_DEBUG("FLUSHING QUEUE"); */
- result = jtag_execute_queue();
- if (result == ERROR_OK)
- {
- matched = 1;
- break;
- }
- }
+ LOG_DEBUG("XSTATE 0x%02X %s", uc, tap_state_name(mystate) );
+
+ path = calloc(XSTATE_MAX_PATH, 4);
+ path_len = 1;
- if (!matched)
+ path[0] = mystate;
+ if (xsvf_read_xstates(xsvf_fd, path, XSTATE_MAX_PATH, &path_len) != ERROR_OK)
+ do_abort = 1;
+ else
+ {
+ int i,lasti;
+
+ /* here the trick is that jtag_add_pathmove() must end in a stable
+ * state, so we must only invoke jtag_add_tlr() when we absolutely
+ * have to
+ */
+ for(i=0,lasti=0; i<path_len; i++)
{
- LOG_USER( "%s mismatch", op_name);
- tdo_mismatch = 1;
- break;
+ if(path[i]==TAP_RESET)
+ {
+ if(i>lasti)
+ {
+ jtag_add_pathmove(i-lasti,path+lasti);
+ }
+ lasti=i+1;
+ jtag_add_tlr();
+ }
}
-
- /* See page 19 of XSVF spec regarding opcode "XSDR" */
- if (xruntest)
+ if(i>=lasti)
{
- xsvf_add_statemove(TAP_IDLE);
-
- if (runtest_requires_tck)
- jtag_add_clocks(xruntest);
- else
- jtag_add_sleep(xruntest);
+ jtag_add_pathmove(i-lasti, path+lasti);
}
- else if (xendir != TAP_DRPAUSE) /* we are already in TAP_DRPAUSE */
- xsvf_add_statemove(xenddr);
}
- break;
+ free(path);
+ }
+ break;
- case XSETSDRMASKS:
- LOG_ERROR("unsupported XSETSDRMASKS\n");
- unsupported = 1;
- break;
+ case XENDIR:
- case XSDRINC:
- LOG_ERROR("unsupported XSDRINC\n");
- unsupported = 1;
+ if (read(xsvf_fd, &uc, 1) < 0)
+ {
+ do_abort = 1;
break;
-
- case XSDRB:
- LOG_ERROR("unsupported XSDRB\n");
+ }
+
+ /* see page 22 of XSVF spec */
+ if( uc == 0 )
+ xendir = TAP_IDLE;
+ else if( uc == 1 )
+ xendir = TAP_IRPAUSE;
+ else
+ {
+ LOG_ERROR("illegial XENDIR argument: 0x%02X", uc);
unsupported = 1;
break;
+ }
- case XSDRC:
- LOG_ERROR("unsupported XSDRC\n");
- unsupported = 1;
- break;
+ LOG_DEBUG("XENDIR 0x%02X %s", uc, tap_state_name(xendir));
+ break;
- case XSDRE:
- LOG_ERROR("unsupported XSDRE\n");
- unsupported = 1;
- break;
+ case XENDDR:
- case XSDRTDOB:
- LOG_ERROR("unsupported XSDRTDOB\n");
- unsupported = 1;
+ if (read(xsvf_fd, &uc, 1) < 0)
+ {
+ do_abort = 1;
break;
-
- case XSDRTDOC:
- LOG_ERROR("unsupported XSDRTDOC\n");
+ }
+
+ /* see page 22 of XSVF spec */
+ if( uc == 0 )
+ xenddr = TAP_IDLE;
+ else if( uc == 1 )
+ xenddr = TAP_DRPAUSE;
+ else
+ {
+ LOG_ERROR("illegial XENDDR argument: 0x%02X", uc);
unsupported = 1;
break;
+ }
- case XSDRTDOE:
- LOG_ERROR("unsupported XSDRTDOE\n");
- unsupported = 1;
- break;
+ LOG_DEBUG("XENDDR %02X %s", uc, tap_state_name(xenddr));
+ break;
- case XSTATE:
- {
- tap_state_t mystate;
- tap_state_t *path;
- int path_len;
+ case XSIR:
+ case XSIR2:
+ {
+ u8 short_buf[2];
+ u8* ir_buf;
+ int bitcount;
+ tap_state_t my_end_state = xruntest ? TAP_IDLE : xendir;
- if (read(xsvf_fd, &uc, 1) < 0)
+ if( opcode == XSIR )
+ {
+ /* one byte bitcount */
+ if (read(xsvf_fd, short_buf, 1) < 0)
{
do_abort = 1;
break;
}
-
- mystate = xsvf_to_tap(uc);
-
- LOG_DEBUG("XSTATE 0x%02X %s", uc, jtag_state_name(mystate) );
-
- path = calloc(XSTATE_MAX_PATH, 4);
- path_len = 1;
-
- path[0] = mystate;
- if (xsvf_read_xstates(xsvf_fd, path, XSTATE_MAX_PATH, &path_len) != ERROR_OK)
- do_abort = 1;
- else
- {
- int i,lasti;
-
- /* here the trick is that jtag_add_pathmove() must end in a stable
- * state, so we must only invoke jtag_add_tlr() when we absolutely
- * have to
- */
- for(i=0,lasti=0; i<path_len; i++)
- {
- if(path[i]==TAP_RESET)
- {
- if(i>lasti)
- {
- jtag_add_pathmove(i-lasti,path+lasti);
- }
- lasti=i+1;
- jtag_add_tlr();
- }
- }
- if(i>=lasti)
- {
- jtag_add_pathmove(i-lasti, path+lasti);
- }
- }
- free(path);
+ bitcount = short_buf[0];
+ LOG_DEBUG("XSIR %d", bitcount);
}
- break;
-
- case XENDIR:
+ else
{
- tap_state_t mystate;
-
- if (read(xsvf_fd, &uc, 1) < 0)
+ if (read(xsvf_fd, short_buf, 2) < 0)
{
do_abort = 1;
break;
}
+ bitcount = be_to_h_u16(short_buf);
+ LOG_DEBUG("XSIR2 %d", bitcount);
+ }
- /* see page 22 of XSVF spec */
- mystate = uc == 1 ? TAP_IRPAUSE : TAP_IDLE;
+ ir_buf = malloc((bitcount+7) / 8);
- LOG_DEBUG("XENDIR 0x%02X %s", uc, jtag_state_name(mystate));
+ if (xsvf_read_buffer(bitcount, xsvf_fd, ir_buf) != ERROR_OK)
+ do_abort = 1;
+ else
+ {
+ scan_field_t field;
+
+ field.tap = tap;
+ field.num_bits = bitcount;
+ field.out_value = ir_buf;
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ if (tap == NULL)
+ jtag_add_plain_ir_scan(1, &field, my_end_state);
+ else
+ jtag_add_ir_scan(1, &field, my_end_state);
- /* assuming that the XRUNTEST comes from SVF RUNTEST, then only these states
- * should come here because the SVF spec only allows these with a RUNTEST
+ if (xruntest)
+ {
+ if (runtest_requires_tck)
+ jtag_add_clocks(xruntest);
+ else
+ jtag_add_sleep(xruntest);
+ }
+
+ /* Note that an -irmask of non-zero in your config file
+ * can cause this to fail. Setting -irmask to zero cand work
+ * around the problem.
*/
- if (mystate != TAP_IRPAUSE && mystate != TAP_DRPAUSE && mystate != TAP_RESET && mystate != TAP_IDLE )
+
+ /* LOG_DEBUG("FLUSHING QUEUE"); */
+ result = jtag_execute_queue();
+ if(result != ERROR_OK)
{
- LOG_ERROR("illegal XENDIR endstate: \"%s\"", jtag_state_name(mystate));
- unsupported = 1;
- break;
+ tdo_mismatch = 1;
}
- xendir = mystate;
}
- break;
+ free(ir_buf);
+ }
+ break;
- case XENDDR:
- {
- tap_state_t mystate;
+ case XCOMMENT:
+ {
+ unsigned int ndx = 0;
+ char comment[128];
+ do
+ {
if (read(xsvf_fd, &uc, 1) < 0)
{
do_abort = 1;
break;
}
- /* see page 22 of XSVF spec */
- mystate = uc == 1 ? TAP_DRPAUSE : TAP_IDLE;
+ if ( ndx < sizeof(comment)-1 )
+ comment[ndx++] = uc;
- LOG_DEBUG("XENDDR %02X %s", uc, jtag_state_name(mystate));
+ } while (uc != 0);
- if (mystate != TAP_IRPAUSE && mystate != TAP_DRPAUSE && mystate != TAP_RESET && mystate != TAP_IDLE )
- {
- LOG_ERROR("illegal XENDDR endstate: \"%s\"", jtag_state_name( mystate ));
- unsupported = 1;
- break;
- }
- xenddr = mystate;
- }
- break;
+ comment[sizeof(comment)-1] = 0; /* regardless, terminate */
+ if (verbose)
+ LOG_USER("%s", comment);
+ }
+ break;
- case XSIR:
- case XSIR2:
- {
- u8 short_buf[2];
- u8* ir_buf;
- int bitcount;
- tap_state_t my_end_state = xruntest ? TAP_IDLE : xendir;
+ case XWAIT:
+ {
+ /* expected in stream:
+ XWAIT <u8 wait_state> <u8 end_state> <u32 usecs>
+ */
- if( opcode == XSIR )
- {
- /* one byte bitcount */
- if (read(xsvf_fd, short_buf, 1) < 0)
- {
- do_abort = 1;
- break;
- }
- bitcount = short_buf[0];
- LOG_DEBUG("XSIR %d", bitcount);
- }
- else
- {
- if (read(xsvf_fd, short_buf, 2) < 0)
- {
- do_abort = 1;
- break;
- }
- bitcount = be_to_h_u16(short_buf);
- LOG_DEBUG("XSIR2 %d", bitcount);
- }
+ u8 wait;
+ u8 end;
+ u8 delay_buf[4];
- ir_buf = malloc((bitcount+7) / 8);
+ tap_state_t wait_state;
+ tap_state_t end_state;
+ int delay;
- if (xsvf_read_buffer(bitcount, xsvf_fd, ir_buf) != ERROR_OK)
- do_abort = 1;
- else
- {
- scan_field_t field;
-
- field.tap = tap;
- field.num_bits = bitcount;
- field.out_value = ir_buf;
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- if (tap == NULL)
- jtag_add_plain_ir_scan(1, &field, my_end_state);
- else
- jtag_add_ir_scan(1, &field, my_end_state);
+ if ( read(xsvf_fd, &wait, 1) < 0
+ || read(xsvf_fd, &end, 1) < 0
+ || read(xsvf_fd, delay_buf, 4) < 0)
+ {
+ do_abort = 1;
+ break;
+ }
- if (xruntest)
- {
- if (runtest_requires_tck)
- jtag_add_clocks(xruntest);
- else
- jtag_add_sleep(xruntest);
- }
+ wait_state = xsvf_to_tap(wait);
+ end_state = xsvf_to_tap(end);
+ delay = be_to_h_u32(delay_buf);
- /* Note that an -irmask of non-zero in your config file
- * can cause this to fail. Setting -irmask to zero cand work
- * around the problem.
- */
+ LOG_DEBUG("XWAIT %s %s usecs:%d", tap_state_name(wait_state), tap_state_name(end_state), delay);
- /* LOG_DEBUG("FLUSHING QUEUE"); */
- result = jtag_execute_queue();
- if(result != ERROR_OK)
- {
- tdo_mismatch = 1;
- }
- }
- free(ir_buf);
+ if (runtest_requires_tck && wait_state == TAP_IDLE )
+ {
+ jtag_add_runtest(delay, end_state);
}
- break;
+ else
+ {
+ xsvf_add_statemove( wait_state );
+ jtag_add_sleep(delay);
+ xsvf_add_statemove( end_state );
+ }
+ }
+ break;
- case XCOMMENT:
+ case XWAITSTATE:
+ {
+ /* expected in stream:
+ XWAITSTATE <u8 wait_state> <u8 end_state> <u32 clock_count> <u32 usecs>
+ */
+
+ u8 clock_buf[4];
+ u8 usecs_buf[4];
+ u8 wait;
+ u8 end;
+ tap_state_t wait_state;
+ tap_state_t end_state;
+ int clock_count;
+ int usecs;
+
+ if ( read(xsvf_fd, &wait, 1) < 0
+ || read(xsvf_fd, &end, 1) < 0
+ || read(xsvf_fd, clock_buf, 4) < 0
+ || read(xsvf_fd, usecs_buf, 4) < 0 )
{
- int ndx = 0;
- char comment[128];
+ do_abort = 1;
+ break;
+ }
- do
- {
- if (read(xsvf_fd, &uc, 1) < 0)
- {
- do_abort = 1;
- break;
- }
+ wait_state = xsvf_to_tap( wait );
+ end_state = xsvf_to_tap( end );
- if ( ndx < sizeof(comment)-1 )
- comment[ndx++] = uc;
+ clock_count = be_to_h_u32(clock_buf);
+ usecs = be_to_h_u32(usecs_buf);
- } while (uc != 0);
+ LOG_DEBUG("XWAITSTATE %s %s clocks:%i usecs:%i",
+ tap_state_name(wait_state),
+ tap_state_name(end_state),
+ clock_count, usecs);
- comment[sizeof(comment)-1] = 0; /* regardless, terminate */
- LOG_USER(comment);
- }
- break;
-
- case XWAIT:
+ /* the following states are 'stable', meaning that they have a transition
+ * in the state diagram back to themselves. This is necessary because we will
+ * be issuing a number of clocks in this state. This set of allowed states is also
+ * determined by the SVF RUNTEST command's allowed states.
+ */
+ if (wait_state != TAP_IRPAUSE && wait_state != TAP_DRPAUSE && wait_state != TAP_RESET && wait_state != TAP_IDLE)
{
- /* expected in stream:
- XWAIT <u8 wait_state> <u8 end_state> <u32 usecs>
- */
+ LOG_ERROR("illegal XWAITSTATE wait_state: \"%s\"", tap_state_name( wait_state ));
+ unsupported = 1;
+ }
- u8 wait;
- u8 end;
- u8 delay_buf[4];
+ xsvf_add_statemove( wait_state );
- tap_state_t wait_state;
- tap_state_t end_state;
- int delay;
+ jtag_add_clocks( clock_count );
- if ( read(xsvf_fd, &wait, 1) < 0
- || read(xsvf_fd, &end, 1) < 0
- || read(xsvf_fd, delay_buf, 4) < 0)
- {
- do_abort = 1;
- break;
- }
+ jtag_add_sleep( usecs );
- wait_state = xsvf_to_tap(wait);
- end_state = xsvf_to_tap(end);
- delay = be_to_h_u32(delay_buf);
-
- LOG_DEBUG("XWAIT %s %s usecs:%d", jtag_state_name(wait_state), jtag_state_name(end_state), delay);
+ xsvf_add_statemove( end_state );
+ }
+ break;
- if (runtest_requires_tck && wait_state == TAP_IDLE )
- {
- jtag_add_runtest(delay, end_state);
- }
- else
- {
- xsvf_add_statemove( wait_state );
- jtag_add_sleep(delay);
- xsvf_add_statemove( end_state );
- }
- }
- break;
+ case LCOUNT:
+ {
+ /* expected in stream:
+ LCOUNT <u32 loop_count>
+ */
+ u8 count_buf[4];
- case XWAITSTATE:
+ if ( read(xsvf_fd, count_buf, 4) < 0 )
{
- /* expected in stream:
- XWAITSTATE <u8 wait_state> <u8 end_state> <u32 clock_count> <u32 usecs>
- */
-
- u8 clock_buf[4];
- u8 usecs_buf[4];
- u8 wait;
- u8 end;
- tap_state_t wait_state;
- tap_state_t end_state;
- int clock_count;
- int usecs;
-
- if ( read(xsvf_fd, &wait, 1) < 0
- || read(xsvf_fd, &end, 1) < 0
- || read(xsvf_fd, clock_buf, 4) < 0
- || read(xsvf_fd, usecs_buf, 4) < 0 )
- {
- do_abort = 1;
- break;
- }
-
- wait_state = xsvf_to_tap( wait );
- end_state = xsvf_to_tap( end );
+ do_abort = 1;
+ break;
+ }
- clock_count = be_to_h_u32(clock_buf);
- usecs = be_to_h_u32(usecs_buf);
+ loop_count = be_to_h_u32(count_buf);
+ LOG_DEBUG("LCOUNT %d", loop_count);
+ }
+ break;
- LOG_DEBUG("XWAITSTATE %s %s clocks:%i usecs:%i",
- jtag_state_name(wait_state),
- jtag_state_name(end_state),
- clock_count, usecs);
+ case LDELAY:
+ {
+ /* expected in stream:
+ LDELAY <u8 wait_state> <u32 clock_count> <u32 usecs_to_sleep>
+ */
+ u8 state;
+ u8 clock_buf[4];
+ u8 usecs_buf[4];
+
+ if ( read(xsvf_fd, &state, 1) < 0
+ || read(xsvf_fd, clock_buf, 4) < 0
+ || read(xsvf_fd, usecs_buf, 4) < 0 )
+ {
+ do_abort = 1;
+ break;
+ }
- /* the following states are 'stable', meaning that they have a transition
- * in the state diagram back to themselves. This is necessary because we will
- * be issuing a number of clocks in this state. This set of allowed states is also
- * determined by the SVF RUNTEST command's allowed states.
- */
- if (wait_state != TAP_IRPAUSE && wait_state != TAP_DRPAUSE && wait_state != TAP_RESET && wait_state != TAP_IDLE)
- {
- LOG_ERROR("illegal XWAITSTATE wait_state: \"%s\"", jtag_state_name( wait_state ));
- unsupported = 1;
- }
+ loop_state = xsvf_to_tap(state);
+ loop_clocks = be_to_h_u32(clock_buf);
+ loop_usecs = be_to_h_u32(usecs_buf);
- xsvf_add_statemove( wait_state );
+ LOG_DEBUG("LDELAY %s clocks:%d usecs:%d", tap_state_name(loop_state), loop_clocks, loop_usecs);
+ }
+ break;
- jtag_add_clocks( clock_count );
+ /* LSDR is more like XSDRTDO than it is like XSDR. It uses LDELAY which
+ * comes with clocks !AND! sleep requirements.
+ */
+ case LSDR:
+ {
+ int limit = loop_count;
+ int matched = 0;
+ int attempt;
- jtag_add_sleep( usecs );
+ LOG_DEBUG("LSDR");
- xsvf_add_statemove( end_state );
- }
- break;
-
- case LCOUNT:
+ if ( xsvf_read_buffer(xsdrsize, xsvf_fd, dr_out_buf) != ERROR_OK
+ || xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_buf) != ERROR_OK )
{
- /* expected in stream:
- LCOUNT <u32 loop_count>
- */
- u8 count_buf[4];
-
- if ( read(xsvf_fd, count_buf, 4) < 0 )
- {
- do_abort = 1;
- break;
- }
-
- loop_count = be_to_h_u32(count_buf);
- LOG_DEBUG("LCOUNT %d", loop_count);
+ do_abort = 1;
+ break;
}
- break;
- case LDELAY:
+ if (limit < 1)
+ limit = 1;
+
+ for( attempt=0; attempt<limit; ++attempt )
{
- /* expected in stream:
- LDELAY <u8 wait_state> <u32 clock_count> <u32 usecs_to_sleep>
- */
- u8 state;
- u8 clock_buf[4];
- u8 usecs_buf[4];
-
- if ( read(xsvf_fd, &state, 1) < 0
- || read(xsvf_fd, clock_buf, 4) < 0
- || read(xsvf_fd, usecs_buf, 4) < 0 )
- {
- do_abort = 1;
- break;
- }
+ scan_field_t field;
- loop_state = xsvf_to_tap(state);
- loop_clocks = be_to_h_u32(clock_buf);
- loop_usecs = be_to_h_u32(usecs_buf);
+ xsvf_add_statemove( loop_state );
+ jtag_add_clocks(loop_clocks);
+ jtag_add_sleep(loop_usecs);
- LOG_DEBUG("LDELAY %s clocks:%d usecs:%d", jtag_state_name(loop_state), loop_clocks, loop_usecs);
- }
- break;
+ field.tap = tap;
+ field.num_bits = xsdrsize;
+ field.out_value = dr_out_buf;
+ field.out_mask = NULL;
+ field.in_value = NULL;
- /* LSDR is more like XSDRTDO than it is like XSDR. It uses LDELAY which
- * comes with clocks !AND! sleep requirements.
- */
- case LSDR:
- {
- int limit = loop_count;
- int matched = 0;
- int attempt;
+ if (attempt > 0 && verbose)
+ LOG_USER("LSDR retry %d", attempt);
- LOG_DEBUG("LSDR");
+ jtag_set_check_value(&field, dr_in_buf, dr_in_mask, NULL);
+ if (tap == NULL)
+ jtag_add_plain_dr_scan(1, &field, TAP_DRPAUSE);
+ else
+ jtag_add_dr_scan(1, &field, TAP_DRPAUSE);
- if ( xsvf_read_buffer(xsdrsize, xsvf_fd, dr_out_buf) != ERROR_OK
- || xsvf_read_buffer(xsdrsize, xsvf_fd, dr_in_buf) != ERROR_OK )
+ /* LOG_DEBUG("FLUSHING QUEUE"); */
+ result = jtag_execute_queue();
+ if(result == ERROR_OK)
{
- do_abort = 1;
+ matched = 1;
break;
}
+ }
- if (limit < 1)
- limit = 1;
-
- for( attempt=0; attempt<limit; ++attempt )
- {
- scan_field_t field;
-
- field.tap = tap;
- field.num_bits = xsdrsize;
- field.out_value = dr_out_buf;
- field.out_mask = NULL;
- field.in_value = NULL;
-
- if (attempt > 0)
- LOG_USER("LSDR retry %d", attempt);
-
- jtag_set_check_value(&field, dr_in_buf, dr_in_mask, NULL);
- if (tap == NULL)
- jtag_add_plain_dr_scan(1, &field, loop_state);
- else
- jtag_add_dr_scan(1, &field, loop_state);
+ if (!matched )
+ {
+ LOG_USER( "LSDR mismatch" );
+ tdo_mismatch = 1;
+ break;
+ }
+ }
+ break;
- /* LOG_DEBUG("FLUSHING QUEUE"); */
- result = jtag_execute_queue();
- if(result == ERROR_OK)
- {
- matched = 1;
- break;
- }
+ case XTRST:
+ {
+ u8 trst_mode;
- jtag_add_clocks(loop_clocks);
- jtag_add_sleep(loop_usecs);
- }
+ if (read(xsvf_fd, &trst_mode, 1) < 0)
+ {
+ do_abort = 1;
+ break;
+ }
- if (!matched )
- {
- LOG_USER( "LSDR mismatch" );
- tdo_mismatch = 1;
- break;
- }
+ switch( trst_mode )
+ {
+ case XTRST_ON:
+ jtag_add_reset(1, 0);
+ break;
+ case XTRST_OFF:
+ case XTRST_Z:
+ jtag_add_reset(0, 0);
+ break;
+ case XTRST_ABSENT:
+ break;
+ default:
+ LOG_ERROR( "XTRST mode argument (0x%02X) out of range", trst_mode );
+ do_abort = 1;
}
- break;
+ }
+ break;
- default:
- LOG_ERROR("unknown xsvf command (0x%02X)\n", uc);
- unsupported = 1;
+ default:
+ LOG_ERROR("unknown xsvf command (0x%02X)\n", uc);
+ unsupported = 1;
}
if (do_abort || unsupported || tdo_mismatch)
}
-/* PSUEDO-Code from Xilinx Appnote XAPP067.pdf:
+#if 0 /* this comment style used to try and keep uncrustify from adding * at begin of line */
+
+PSUEDO-Code from Xilinx Appnote XAPP067.pdf:
the following pseudo code clarifies the intent of the xrepeat support. The
flow given is for the entire processing of an SVF file, not an XSVF file.
store <TCK value> as <current pause time>
end if
-*/
+#endif
Code Review / openocd.git / blobdiff