-#Script for ZY1000\r
-\r
-#Atmel ties SRST & TRST together, at which point it makes\r
-#no sense to use TRST, but use TMS instead.\r
-#\r
-#The annoying thing with tying SRST & TRST together is that\r
-#there is no way to halt the CPU *before and during* the\r
-#SRST reset, which means that the CPU will run a number\r
-#of cycles before it can be halted(as much as milliseconds).\r
-reset_config srst_only srst_pulls_trst\r
- \r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#target configuration\r
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
-target arm7tdmi little reset_init 0 arm7tdmi-s_r4\r
-\r
-# at CPU CLK <32kHz this must be disabled\r
-arm7 fast_memory_access enable\r
-arm7_9 dcc_downloads enable\r
-\r
-\r
-flash bank ecosflash 0x01000000 0x200000 2 2 0 /rom/at91eb40a.elf\r
-target_script 0 reset event/zy1000_reset.script\r
-\r
-# required for usable performance. Used for lots of\r
-# other things than flash programming.\r
-working_area 0 0x00000000 0x20000 nobackup\r
+#Script for ZY1000
+
+#Atmel ties SRST & TRST together, at which point it makes
+#no sense to use TRST, but use TMS instead.
+#
+#The annoying thing with tying SRST & TRST together is that
+#there is no way to halt the CPU *before and during* the
+#SRST reset, which means that the CPU will run a number
+#of cycles before it can be halted(as much as milliseconds).
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+target arm7tdmi little 0 arm7tdmi-s_r4
+
+# at CPU CLK <32kHz this must be disabled
+arm7_9 fast_memory_access enable
+arm7_9 dcc_downloads enable
+arm7_9 sw_bkpts enable
+
+flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
+target_script 0 reset event/zy1000_reset.script
+
+# required for usable performance. Used for lots of
+# other things than flash programming.
+working_area 0 0x00000000 0x20000 nobackup