- jtag_khz/speed are now single parameter only. These are used
authoroharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Mon, 21 Jul 2008 15:59:41 +0000 (15:59 +0000)
committeroharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Mon, 21 Jul 2008 15:59:41 +0000 (15:59 +0000)
from pre/post_reset event scripts. Adding the second parameter was
a mistake seen in retrospect. this gives precise control in post_reset
for *when* the post reset speed is set. The pre_reset event was
added *after* the second parameter to jtag_khz/speed
- the target implementations no longer gets involved in the reset mode
scheme. Either they reset a target into a halted mode or not.
target_process_reset()
detects if the reset halt failed or not.
- tcl target event names are now target_N_name.  Mainly internal
at this early stage, but best to get the naming right now.
- added hardcoded reset modes from gdb_server.c. I don't know precisely what
these defaults should be or if it should be made configurable. Perhaps some
hardcoded defaults will do for now and it can be made configurable later.
- bugfix in cortex_m3.c for reset_run_and_xxx?
- issue syntax error upon obsolete argument in target command instead of
printing message that will surely drown in the log

git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60

18 files changed:
src/helper/command.c
src/helper/startup.tcl
src/jtag/jtag.c
src/server/gdb_server.c
src/target/Makefile.am
src/target/arm7_9_common.c
src/target/cortex_m3.c
src/target/event/sam7s256_reset.script
src/target/event/sam7x256_reset.script
src/target/event/str912_reset.script [deleted file]
src/target/target.c
src/target/target.h
src/target/target/str710.cfg
src/target/target/str730.cfg
src/target/target/str750.cfg
src/target/target/str912.cfg
src/target/target/zy1000.cfg
src/target/xscale.c

index 12827ec..0876d87 100644 (file)
@@ -346,6 +346,7 @@ int run_command(command_context_t *context, command_t *c, char *words[], int num
        if (!((context->mode == COMMAND_CONFIG) || (c->mode == COMMAND_ANY) || (c->mode == context->mode) ))
        {
                /* Config commands can not run after the config stage */
+               LOG_ERROR("Illegal mode for command");
                return ERROR_FAIL;
        }
        
index 4e12e30..d3ddb30 100644 (file)
@@ -93,20 +93,6 @@ proc help {args} {
 add_help_text help "Tcl implementation of help command"
 
 
-#a bit of backwards compatibility
-proc ocd_throw {cmd} {
-       set ocd_output ""
-       eval $cmd
-       return $ocd_output
-}
-
-#a bit of backwards compatibility
-proc openocd {cmd} {
-       set ocd_output ""
-       eval $cmd
-       return $ocd_output
-}
-
 # If a fn is unknown to Tcl, we try to execute it as an OpenOCD command
 #
 # We also support two level commands. "flash banks" is translated to
@@ -130,10 +116,13 @@ proc target_script {target_num eventname scriptname} {
        }
 
        # This is the script we invoke
-       proc "target_[set eventname]_[set target_num]" {} "script $scriptname" 
+       proc "target_[set target_num]_[set eventname]" {} "script $scriptname" 
        
 }
 
+add_help_text target_script "<target#> <event=reset/pre_reset/post_halt/pre_resume/gdb_program_config> <script_file>"
+
+
 # Try flipping / and \ to find file if the filename does not
 # match the precise spelling
 proc find {filename} {
@@ -162,5 +151,4 @@ proc script {filename} {
 
 add_help_text script "<filename> - filename of OpenOCD script (tcl) to run"
 
-add_help_text target_script "<target#> <event=reset/pre_reset/post_halt/pre_resume/gdb_program_config> <script_file>"
 
index b39e586..6199ed2 100644 (file)
@@ -140,7 +140,7 @@ int jtag_ntrst_delay = 0; /* default to no nTRST delay */
 jtag_event_callback_t *jtag_event_callbacks;
 
 /* speed in kHz*/
-static int speed1 = 0, speed2 = 0;
+static int speed_khz = 0;
 /* flag if the kHz speed was defined */
 static int hasKHz = 0;
 
@@ -240,7 +240,7 @@ jtag_interface_t *jtag = NULL;
 /* configuration */
 jtag_interface_t *jtag_interface = NULL;
 int jtag_speed = 0;
-int jtag_speed_post_reset = 0;
+
 
 
 /* forward declarations */
@@ -1467,7 +1467,7 @@ int jtag_register_commands(struct command_context_s *cmd_ctx)
        register_command(cmd_ctx, NULL, "interface", handle_interface_command,
                COMMAND_CONFIG, NULL);
        register_command(cmd_ctx, NULL, "jtag_speed", handle_jtag_speed_command,
-               COMMAND_ANY, "set jtag speed (if supported) <reset speed> [<post reset speed, default value is reset speed>]");
+               COMMAND_ANY, "set jtag speed (if supported)");
        register_command(cmd_ctx, NULL, "jtag_khz", handle_jtag_khz_command,
                COMMAND_ANY, "same as jtag_speed, except it takes maximum khz as arguments. 0 KHz = RTCK.");
        register_command(cmd_ctx, NULL, "jtag_device", handle_jtag_device_command,
@@ -1510,9 +1510,7 @@ int jtag_interface_init(struct command_context_s *cmd_ctx)
        }
        if(hasKHz)
        {
-               /*stay on "reset speed"*/
-               jtag_interface->khz(speed1, &jtag_speed);
-               jtag_interface->khz(speed2, &jtag_speed_post_reset);
+               jtag_interface->khz(speed_khz, &jtag_speed);
                hasKHz = 0;
        }
 
@@ -1849,79 +1847,67 @@ int handle_jtag_ntrst_delay_command(struct command_context_s *cmd_ctx, char *cmd
 
 int handle_jtag_speed_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 {
-       int cur_speed = 0;
+       int retval=ERROR_OK;
        
-       if (argc != 0)
+       if (argc == 1)
        {
-               if ((argc<1) || (argc>2))
-                       return ERROR_COMMAND_SYNTAX_ERROR;
-               
                LOG_DEBUG("handle jtag speed");
-               
-               if (argc >= 1)
-                       cur_speed = jtag_speed = jtag_speed_post_reset = strtoul(args[0], NULL, 0);
-               if (argc == 2)
-                       cur_speed = jtag_speed_post_reset = strtoul(args[1], NULL, 0);
+
+               int cur_speed = 0;
+               cur_speed = jtag_speed = strtoul(args[0], NULL, 0);
                        
                /* this command can be called during CONFIG, 
                 * in which case jtag isn't initialized */
                if (jtag)
                {
-                       jtag->speed_div(jtag_speed, &speed1);
-                       jtag->speed_div(jtag_speed_post_reset, &speed2);
-                       jtag->speed(cur_speed);
+                       retval=jtag->speed(cur_speed);
                }
-       }               
-       command_print(cmd_ctx, "jtag_speed: %d, %d", jtag_speed, jtag_speed_post_reset);
+       } else if (argc == 0)
+       {
+       } else
+       {
+               retval=ERROR_COMMAND_SYNTAX_ERROR;
+       }
+       command_print(cmd_ctx, "jtag_speed: %d", jtag_speed);
        
-       return ERROR_OK;
+       return retval;
 }
 
 int handle_jtag_khz_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 {
+       int retval=ERROR_OK;
        LOG_DEBUG("handle jtag khz");
        
-       if (argc>2)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       if(argc != 0)
+       if(argc == 1)
        {
-               
-               if (argc >= 1)
-                       speed1 = speed2 = strtoul(args[0], NULL, 0);
-               if (argc == 2)
-                       speed2 = strtoul(args[1], NULL, 0);
-       
+               speed_khz = strtoul(args[0], NULL, 0);
                if (jtag != NULL)
                {
                        int cur_speed = 0;
                        LOG_DEBUG("have interface set up");
-                       int speed_div1, speed_div2;
-                       if (jtag->khz(speed1, &speed_div1)!=ERROR_OK)
+                       int speed_div1;
+                       if ((retval=jtag->khz(speed_khz, &speed_div1))!=ERROR_OK)
                        {
-                               speed1 = speed2 = 0;
-                               return ERROR_OK;
-                       }
-                       if (jtag->khz(speed2, &speed_div2)!=ERROR_OK)
-                       {
-                               speed1 = speed2 = 0;
-                               return ERROR_OK;
+                               speed_khz = 0;
+                               return retval;
                        }
        
-                       if (argc >= 1)
-                               cur_speed = jtag_speed = jtag_speed_post_reset = speed_div1;
-                       if (argc == 2)
-                               cur_speed = jtag_speed_post_reset = speed_div2;
+                       cur_speed = jtag_speed = speed_div1;
        
-                       jtag->speed(cur_speed);
+                       retval=jtag->speed(cur_speed);
                } else
                {
                        hasKHz = 1;
                }
+       } else if (argc==0)
+       {
+       } else
+       {
+               retval=ERROR_COMMAND_SYNTAX_ERROR;
        }
-       command_print(cmd_ctx, "jtag_khz: %d, %d", speed1, speed2);
-       
-       return ERROR_OK;
+       command_print(cmd_ctx, "jtag_khz: %d", speed_khz);
+       return retval;
+
 }
 
 int handle_endstate_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
index 850d0de..665e350 100644 (file)
@@ -1807,7 +1807,8 @@ int gdb_detach(connection_t *connection, target_t *target)
                        break;
 
                case GDB_DETACH_RESET:
-                       target_process_reset(connection->cmd_ctx);
+                       /* FIX?? make this configurable?? */
+                       target_process_reset(connection->cmd_ctx, RESET_HALT);
                        break;
 
                case GDB_DETACH_HALT:
@@ -1949,7 +1950,8 @@ int gdb_input_inner(connection_t *connection)
                                        break;
                                case 'R':
                                        /* handle extended restart packet */
-                                       target_process_reset(connection->cmd_ctx);
+                                       /* fix?? make this configurable? */
+                                       target_process_reset(connection->cmd_ctx, RESET_HALT);
                                        break;
                                default:
                                        /* ignore unkown packets */
index 816cb05..5b0ef6e 100644 (file)
@@ -28,7 +28,7 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script
        event/omap5912_reset.script interface/jtagkey-tiny.cfg interface/jtagkey.cfg interface/str9-comstick.cfg \
        target/epc9301.cfg target/ipx42x.cfg target/lpc2129.cfg target/netx500.cfg \
        target/omap5912.cfg target/pxa270.cfg target/str750.cfg target/str9comstick.cfg \
-       target/str730.cfg target/stm32stick.cfg event/str912_reset.script event/str710_program.script \
+       target/str730.cfg target/stm32stick.cfg event/str710_program.script \
        target/lm3s811.cfg interface/luminary.cfg interface/luminary-libftdi.cfg interface/luminary-lm3s811.cfg \
        interface/stm32-stick.cfg interface/calao-usb-a9260-c01.cfg interface/calao-usb-a9260-c02.cfg \
        interface/calao-usb-a9260.cfg target/at91sam9260minimal.cfg  event/lpc2148_reset.script \
index a57fbb5..563f470 100644 (file)
@@ -704,7 +704,7 @@ int arm7_9_poll(target_t *target)
                        int check_pc=0;
                        if (target->state == TARGET_RESET)
                        {
-                               if ((target->reset_mode == RESET_HALT) || (target->reset_mode == RESET_INIT))
+                               if (target->reset_halt)
                                {
                                        if ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)
                                        {
@@ -772,7 +772,7 @@ int arm7_9_assert_reset(target_t *target)
                return ERROR_FAIL;
        }
 
-       if ((target->reset_mode == RESET_HALT) || (target->reset_mode == RESET_INIT))
+       if (target->reset_halt)
        {
                /*
                 * Some targets do not support communication while SRST is asserted. We need to
index a90baaf..e3ed4cf 100644 (file)
@@ -691,7 +691,7 @@ int cortex_m3_assert_reset(target_t *target)
                
        ahbap_write_system_u32(swjdp, DCB_DCRDR, 0 );
        
-       if (target->reset_mode == RESET_RUN)
+       if (!target->reset_halt)
        {
                /* Set/Clear C_MASKINTS in a separate operation */
                if (cortex_m3->dcb_dhcsr & C_MASKINTS)
index 456341d..1d38928 100644 (file)
@@ -5,13 +5,19 @@
 #
 # http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/openocd_intro/index.html
 #
-mww 0xfffffd44 0x00008000      # disable watchdog
-mww 0xfffffd08 0xa5000001      # enable user reset
-mww 0xfffffc20 0x00000601      # CKGR_MOR : enable the main oscillator
+# disable watchdog
+mww 0xfffffd44 0x00008000
+# enable user reset
+mww 0xfffffd08 0xa5000001
+# CKGR_MOR : enable the main oscillator
+mww 0xfffffc20 0x00000601      
 sleep 10
-mww 0xfffffc2c 0x00481c0e      # CKGR_PLLR: 96.1097 MHz
+# CKGR_PLLR: 96.1097 MHz
+mww 0xfffffc2c 0x00481c0e      
 sleep 10
-mww 0xfffffc30 0x00000007      # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
+# PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
+mww 0xfffffc30 0x00000007      
 sleep 10
-mww 0xffffff60 0x003c0100      # MC_FMR: flash mode (FWS=1,FMCN=60)
+# MC_FMR: flash mode (FWS=1,FMCN=60)
+mww 0xffffff60 0x003c0100      
 sleep 100
index 456341d..1612366 100644 (file)
@@ -5,13 +5,19 @@
 #
 # http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/openocd_intro/index.html
 #
-mww 0xfffffd44 0x00008000      # disable watchdog
-mww 0xfffffd08 0xa5000001      # enable user reset
-mww 0xfffffc20 0x00000601      # CKGR_MOR : enable the main oscillator
+# disable watchdog
+mww 0xfffffd44 0x00008000      
+# enable user reset
+mww 0xfffffd08 0xa5000001      
+# CKGR_MOR : enable the main oscillator
+mww 0xfffffc20 0x00000601      
 sleep 10
-mww 0xfffffc2c 0x00481c0e      # CKGR_PLLR: 96.1097 MHz
+# CKGR_PLLR: 96.1097 MHz
+mww 0xfffffc2c 0x00481c0e      
 sleep 10
-mww 0xfffffc30 0x00000007      # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
+# PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
+mww 0xfffffc30 0x00000007      
 sleep 10
-mww 0xffffff60 0x003c0100      # MC_FMR: flash mode (FWS=1,FMCN=60)
+# MC_FMR: flash mode (FWS=1,FMCN=60)
+mww 0xffffff60 0x003c0100      
 sleep 100
diff --git a/src/target/event/str912_reset.script b/src/target/event/str912_reset.script
deleted file mode 100644 (file)
index 33c6204..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-# -- Enable 96K RAM */
-mww 0x5C002034, 0x0191 # PFQBC enabled / DTCM & AHB wait-states disabled
-
-str9x flash_config 0 4 2 0 0x80000
-flash protect 0 0 7 off
index 0f492ae..28ebf0f 100644 (file)
@@ -284,14 +284,12 @@ int target_resume(struct target_s *target, int current, u32 address, int handle_
        return retval;
 }
 
-int target_process_reset(struct command_context_s *cmd_ctx)
+int target_process_reset(struct command_context_s *cmd_ctx, enum target_reset_mode reset_mode)
 {
        int retval = ERROR_OK;
        target_t *target;
        struct timeval timeout, now;
 
-       jtag->speed(jtag_speed);
-
        target = targets;
        while (target)
        {
@@ -318,30 +316,7 @@ int target_process_reset(struct command_context_s *cmd_ctx)
                return retval;
        
        keep_alive(); /* we might be running on a very slow JTAG clk */
-       
-       /* prepare reset_halt where necessary */
-       target = targets;
-       while (target)
-       {
-               if (jtag_reset_config & RESET_SRST_PULLS_TRST)
-               {
-                       switch (target->reset_mode)
-                       {
-                               case RESET_HALT:
-                                       command_print(cmd_ctx, "nSRST pulls nTRST, falling back to \"reset run_and_halt\"");
-                                       target->reset_mode = RESET_RUN_AND_HALT;
-                                       break;
-                               case RESET_INIT:
-                                       command_print(cmd_ctx, "nSRST pulls nTRST, falling back to \"reset run_and_init\"");
-                                       target->reset_mode = RESET_RUN_AND_INIT;
-                                       break;
-                               default:
-                                       break;
-                       } 
-               }
-               target = target->next;
-       }
-       
+               
        target = targets;
        while (target)
        {
@@ -349,6 +324,7 @@ int target_process_reset(struct command_context_s *cmd_ctx)
                 * have to drop working areas
                 */
                target_free_all_working_areas_restore(target, 0);
+               target->reset_halt=((reset_mode==RESET_HALT)||(reset_mode==RESET_INIT));
                target->type->assert_reset(target);
                target = target->next;
        }
@@ -362,7 +338,7 @@ int target_process_reset(struct command_context_s *cmd_ctx)
        target = targets;
        while (target)
        {
-               switch (target->reset_mode)
+               switch (reset_mode)
                {
                        case RESET_RUN:
                                /* nothing to do if target just wants to be run */
@@ -377,10 +353,12 @@ int target_process_reset(struct command_context_s *cmd_ctx)
                                target_register_event_callback(target_init_handler, cmd_ctx);
                                break;
                        case RESET_HALT:
-                               target_halt(target);
+                               if ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)
+                                       target_halt(target);
                                break;
                        case RESET_INIT:
-                               target_halt(target);
+                               if ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)
+                                       target_halt(target);
                                target_register_event_callback(target_init_handler, cmd_ctx);
                                break;
                        default:
@@ -399,6 +377,14 @@ int target_process_reset(struct command_context_s *cmd_ctx)
        while (target)
        {
                target->type->deassert_reset(target);
+               /* We can fail to bring the target into the halted state  */
+               target_poll(target);
+               if (target->reset_halt&&((target->state != TARGET_HALTED)))
+               {
+                       LOG_WARNING("Failed to reset target into halted mode - issuing halt");
+                       target->type->halt(target);
+               }
+               
                target = target->next;
        }
        
@@ -415,12 +401,6 @@ int target_process_reset(struct command_context_s *cmd_ctx)
                        return retval;
        }               
        
-       /* post reset scripts can be quite long, increase speed now. If post
-        * reset scripts needs a different speed, they can set the speed to
-        * whatever they need.
-        */
-       jtag->speed(jtag_speed_post_reset);
-       
        LOG_DEBUG("Waiting for halted stated as approperiate");
        
        /* Wait for reset to complete, maximum 5 seconds. */    
@@ -437,10 +417,10 @@ int target_process_reset(struct command_context_s *cmd_ctx)
                {
                        LOG_DEBUG("Polling target");
                        target_poll(target);
-                       if ((target->reset_mode == RESET_RUN_AND_INIT) || 
-                                       (target->reset_mode == RESET_RUN_AND_HALT) ||
-                                       (target->reset_mode == RESET_HALT) ||
-                                       (target->reset_mode == RESET_INIT))
+                       if ((reset_mode == RESET_RUN_AND_INIT) || 
+                                       (reset_mode == RESET_RUN_AND_HALT) ||
+                                       (reset_mode == RESET_HALT) ||
+                                       (reset_mode == RESET_INIT))
                        {
                                if (target->state != TARGET_HALTED)
                                {
@@ -477,7 +457,6 @@ int target_process_reset(struct command_context_s *cmd_ctx)
        }
        target_unregister_event_callback(target_init_handler, cmd_ctx);
        
-       
        return retval;
 }
 
@@ -1420,23 +1399,28 @@ int handle_target_command(struct command_context_s *cmd_ctx, char *cmd, char **a
                                
                                if (strcmp(args[2], "reset_halt") == 0)
                                {
-                                       LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+                                       LOG_WARNING("reset_mode argument is obsolete.");
+                                       return ERROR_COMMAND_SYNTAX_ERROR;
                                }
                                else if (strcmp(args[2], "reset_run") == 0)
                                {
-                                       LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+                                       LOG_WARNING("reset_mode argument is obsolete.");
+                                       return ERROR_COMMAND_SYNTAX_ERROR;
                                }
                                else if (strcmp(args[2], "reset_init") == 0)
                                {
-                                       LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+                                       LOG_WARNING("reset_mode argument is obsolete.");
+                                       return ERROR_COMMAND_SYNTAX_ERROR;
                                }
                                else if (strcmp(args[2], "run_and_halt") == 0)
                                {
-                                       LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+                                       LOG_WARNING("reset_mode argument is obsolete.");
+                                       return ERROR_COMMAND_SYNTAX_ERROR;
                                }
                                else if (strcmp(args[2], "run_and_init") == 0)
                                {
-                                       LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
+                                       LOG_WARNING("reset_mode argument is obsolete.");
+                                       return ERROR_COMMAND_SYNTAX_ERROR;
                                }
                                else
                                {
@@ -1492,9 +1476,9 @@ int handle_target_command(struct command_context_s *cmd_ctx, char *cmd, char **a
 
 int target_invoke_script(struct command_context_s *cmd_ctx, target_t *target, char *name)
 {
-       return command_run_linef(cmd_ctx, " if {[catch {info body target_%s_%d} t]==0} {target_%s_%d}", 
-       name, get_num_by_target(target),
-       name, get_num_by_target(target));
+       return command_run_linef(cmd_ctx, " if {[catch {info body target_%d_%s} t]==0} {target_%d_%s}", 
+                       get_num_by_target(target), name, 
+                       get_num_by_target(target), name);
 }
 
 int handle_run_and_halt_time_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
@@ -1848,11 +1832,8 @@ int handle_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **ar
                }
        }
        
-       /* temporarily modify mode of current reset target */
-       target->reset_mode = reset_mode;
-
        /* reset *all* targets */
-       target_process_reset(cmd_ctx);
+       target_process_reset(cmd_ctx, reset_mode);
        
        return ERROR_OK;
 }
index 6ee520b..f1c61e3 100644 (file)
@@ -198,7 +198,7 @@ typedef struct target_type_s
 typedef struct target_s
 {
        target_type_t *type;                            /* target type definition (name, access functions) */
-       enum target_reset_mode reset_mode;      /* what to do after a reset */
+       int reset_halt;                                         /* attempt resetting the CPU into the halted mode? */
        int run_and_halt_time;                          /* how long the target should run after a run_and_halt reset */
        u32 working_area;                                       /* working area (initialized RAM). Evaluated 
                                                                                   upon first allocation from virtual/physical address. */
@@ -252,7 +252,7 @@ extern int target_register_user_commands(struct command_context_s *cmd_ctx);
 extern int target_init(struct command_context_s *cmd_ctx);
 extern int target_examine(struct command_context_s *cmd_ctx);
 extern int handle_target(void *priv);
-extern int target_process_reset(struct command_context_s *cmd_ctx);
+extern int target_process_reset(struct command_context_s *cmd_ctx, enum target_reset_mode reset_mode);
 
 extern int target_register_event_callback(int (*callback)(struct target_s *target, enum target_event event, void *priv), void *priv);
 extern int target_unregister_event_callback(int (*callback)(struct target_s *target, enum target_event event, void *priv), void *priv);
index 32589cc..8eb8775 100644 (file)
@@ -1,5 +1,11 @@
 #start slow, speed up after reset
-jtag_khz 10, 6000
+jtag_khz 10
+proc target_0_pre_reset {} {
+       jtag_khz 10
+}
+proc target_0_post_reset {} {
+       jtag_khz 6000
+}
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
@@ -15,6 +21,7 @@ run_and_halt_time 0 30
 
 target_script 0 gdb_program_config event/str710_program.script
 
+
 working_area 0 0x2000C000 0x4000 nobackup
 
 #flash bank str7x <base> <size> 0 0 <target#> <variant>
index 6127048..77f86a7 100644 (file)
@@ -1,6 +1,14 @@
 #STR730 CPU
 
-jtag_khz 10, 3000
+
+jtag_khz 3000
+proc target_0_pre_reset {} {
+       jtag_khz 10
+}
+proc target_0_post_reset {} {
+       jtag_khz 3000
+}
+
 
 #use combined on interfaces or targets that can\92t set TRST/SRST separately
 #reset_config trst_and_srst srst_pulls_trst
index 35509f4..d00eae0 100644 (file)
@@ -1,7 +1,13 @@
 #STR750 CPU
 
 # jtag speed
-jtag_khz 10, 3000
+jtag_khz 10
+proc target_0_pre_reset {} {
+       jtag_khz 10
+}
+proc target_0_post_reset {} {
+       jtag_khz 3000
+}
 
 #use combined on interfaces or targets that can\92t set TRST/SRST separately
 #reset_config trst_and_srst srst_pulls_trst
@@ -15,9 +21,6 @@ jtag_device 4 0x1 0xf 0xe
 jtag_nsrst_delay 500
 jtag_ntrst_delay 500
 
-#target configuration
-daemon_startup reset
-
 #target <type> <startup mode>
 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
 target arm7tdmi little 0 arm7tdmi
index bce03d8..14bb497 100644 (file)
@@ -1,7 +1,26 @@
 # script for str9
 
-# jtag speed
-jtag_khz 16 3000
+# jtag speed. We need to stick to 16kHz until we've finished reset.
+
+jtag_khz 16
+proc target_0_pre_reset {} {
+       jtag_khz 16
+}
+
+proc target_0_post_reset {} {
+       # We can increase speed now that we know the target is halted.
+       jtag_khz 3000
+       
+       # -- Enable 96K RAM
+       # PFQBC enabled / DTCM & AHB wait-states disabled
+       mww 0x5C002034 0x0191 
+
+       str9x flash_config 0 4 2 0 0x80000
+       flash protect 0 0 7 off
+       
+       
+}
+
 
 jtag_nsrst_delay 100
 jtag_ntrst_delay 100
@@ -20,7 +39,6 @@ jtag_device 5 0x1 0x1 0x1e
 target arm966e little 1 arm966e
 run_and_halt_time 0 30
 
-target_script 0 reset event/str912_reset.script
 
 working_area 0 0x50000000 16384 nobackup
 
index 26d5681..8684884 100644 (file)
@@ -17,9 +17,9 @@ jtag_device 4 0x1 0xf 0xe
 target arm7tdmi little 0 arm7tdmi-s_r4
 
 # at CPU CLK <32kHz this must be disabled
-arm7 fast_memory_access enable
+arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
-
+arm7_9 sw_bkpts enable
 
 flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 target_script 0 reset event/zy1000_reset.script
index d3c1b06..d776e21 100644 (file)
@@ -1699,7 +1699,7 @@ int xscale_deassert_reset(target_t *target)
                xscale_write_dcsr(target, 0, 1);
                target->state = TARGET_RUNNING;
 
-               if ((target->reset_mode != RESET_HALT) && (target->reset_mode != RESET_INIT))
+               if (!target->reset_halt)
                {
                        jtag_add_sleep(10000);