+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
/***************************************************************************
* Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de> *
* Copyright (C) 2007,2008 Øyvind Harboe <oyvind.harboe@zylin.com> *
* Copyright (C) 2008 by Spencer Oliver <spen@spen-soft.co.uk> *
* Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net> *
* Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifndef OPENOCD_FLASH_NOR_CORE_H
struct image;
-#define FLASH_MAX_ERROR_STR (128)
-
/**
* Describes the geometry and status of a single flash sector
* within a flash bank. A single bank typically consists of multiple
uint32_t size;
/**
* Indication of erasure status: 0 = not erased, 1 = erased,
- * other = unknown. Set by @c flash_driver_s::erase_check.
+ * other = unknown. Set by @c flash_driver_s::erase_check only.
*
- * Flag is not used in protection block
+ * This information must be considered stale immediately.
+ * Don't set it in flash_driver_s::erase or a device mass_erase
+ * Don't clear it in flash_driver_s::write
+ * The flag is not used in a protection block
*/
int is_erased;
/**
struct target *target; /**< Target to which this bank belongs. */
- struct flash_driver *driver; /**< Driver for this bank. */
+ const struct flash_driver *driver; /**< Driver for this bank. */
void *driver_priv; /**< Private driver storage pointer */
- int bank_number; /**< The 'bank' (or chip number) of this instance. */
- uint32_t base; /**< The base address of this bank */
+ unsigned int bank_number; /**< The 'bank' (or chip number) of this instance. */
+ target_addr_t base; /**< The base address of this bank */
uint32_t size; /**< The size of this chip bank, in bytes */
- int chip_width; /**< Width of the chip in bytes (1,2,4 bytes) */
- int bus_width; /**< Maximum bus width, in bytes (1,2,4 bytes) */
+ unsigned int chip_width; /**< Width of the chip in bytes (1,2,4 bytes) */
+ unsigned int bus_width; /**< Maximum bus width, in bytes (1,2,4 bytes) */
/** Erased value. Defaults to 0xFF. */
uint8_t erased_value;
/**
* The number of sectors on this chip. This value will
- * be set intially to 0, and the flash driver must set this to
+ * be set initially to 0, and the flash driver must set this to
* some non-zero value during "probe()" or "auto_probe()".
*/
- int num_sectors;
+ unsigned int num_sectors;
/** Array of sectors, allocated and initialized by the flash driver */
struct flash_sector *sectors;
/**
* The number of protection blocks in this bank. This value
- * is set intially to 0 and sectors are used as protection blocks.
+ * is set initially to 0 and sectors are used as protection blocks.
* Driver probe can set protection blocks array to work with
* protection granularity different than sector size.
*/
- int num_prot_blocks;
- /** Array of protection blocks, allocated and initilized by the flash driver */
+ unsigned int num_prot_blocks;
+ /** Array of protection blocks, allocated and initialized by the flash driver */
struct flash_sector *prot_blocks;
struct flash_bank *next; /**< The next flash bank on this chip */
* @returns ERROR_OK if successful; otherwise, an error code.
*/
int flash_erase_address_range(struct target *target,
- bool pad, uint32_t addr, uint32_t length);
+ bool pad, target_addr_t addr, uint32_t length);
-int flash_unlock_address_range(struct target *target, uint32_t addr,
+int flash_unlock_address_range(struct target *target, target_addr_t addr,
uint32_t length);
/**
* @param target The target with the flash to be programmed.
* @param image The image that will be programmed to flash.
* @param written On return, contains the number of bytes written.
- * @param erase If non-zero, indicates the flash driver should first
+ * @param erase Indicates whether the flash driver should first
* erase the corresponding banks or sectors before programming.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
int flash_write(struct target *target,
- struct image *image, uint32_t *written, int erase);
+ struct image *image, uint32_t *written, bool erase);
/**
* Forces targets to re-examine their erase/protection state.
void flash_set_dirty(void);
/** @returns The number of flash banks currently defined. */
-int flash_get_bank_count(void);
+unsigned int flash_get_bank_count(void);
/** Deallocates bank->driver_priv */
void default_flash_free_driver_priv(struct flash_bank *bank);
/** Deallocates all flash banks */
void flash_free_all_banks(void);
+
/**
* Provides default read implementation for flash memory.
* @param bank The bank to read.
*/
int default_flash_read(struct flash_bank *bank,
uint8_t *buffer, uint32_t offset, uint32_t count);
+
+/**
+ * Provides default verify implementation for flash memory.
+ * @param bank The bank to verify.
+ * @param buffer The data bytes to verify.
+ * @param offset The offset into the chip to verify.
+ * @param count The number of bytes to verify.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
+int default_flash_verify(struct flash_bank *bank,
+ const uint8_t *buffer, uint32_t offset, uint32_t count);
+
/**
* Provides default erased-bank check handling. Checks to see if
* the flash driver knows they are erased; if things look uncertain,
* @returns ERROR_OK if successful; otherwise, an error code.
*/
int default_flash_blank_check(struct flash_bank *bank);
-
/**
* Returns the flash bank specified by @a name, which matches the
* driver name and a suffix (option) specify the driver-specific
* @param bank returned bank if fn returns ERROR_OK
* @returns ERROR_OK if successful
*/
-int get_flash_bank_by_num(int num, struct flash_bank **bank);
+int get_flash_bank_by_num(unsigned int num, struct flash_bank **bank);
/**
- * Retreives @a bank from a command argument, reporting errors parsing
- * the bank identifier or retreiving the specified bank. The bank
+ * Retrieves @a bank from a command argument, reporting errors parsing
+ * the bank identifier or retrieving the specified bank. The bank
* may be identified by its bank number or by @c name.instance, where
* @a instance is driver-specific.
* @param name_index The index to the string in args containing the
* bank identifier.
- * @param bank On output, contians a pointer to the bank or NULL.
+ * @param bank On output, contains a pointer to the bank or NULL.
* @returns ERROR_OK on success, or an error indicating the problem.
*/
COMMAND_HELPER(flash_command_get_bank, unsigned name_index,
struct flash_bank **bank);
+/**
+ * Retrieves @a bank from a command argument, reporting errors parsing
+ * the bank identifier or retrieving the specified bank. The bank
+ * may be identified by its bank number or by @c name.instance, where
+ * @a instance is driver-specific.
+ * @param name_index The index to the string in args containing the
+ * bank identifier.
+ * @param bank On output, contains a pointer to the bank or NULL.
+ * @param do_probe Does auto-probing when set, otherwise without probing.
+ * @returns ERROR_OK on success, or an error indicating the problem.
+ */
+COMMAND_HELPER(flash_command_get_bank_probe_optional, unsigned int name_index,
+ struct flash_bank **bank, bool do_probe);
/**
* Returns the flash bank like get_flash_bank_by_num(), without probing.
* @param num The flash bank number.
* @returns A struct flash_bank for flash bank @a num, or NULL.
*/
-struct flash_bank *get_flash_bank_by_num_noprobe(int num);
+struct flash_bank *get_flash_bank_by_num_noprobe(unsigned int num);
/**
* Returns the flash bank located at a specified address.
* @param target The target, presumed to contain one or more banks.
* @param addr An address that is within the range of the bank.
* @param check return ERROR_OK and result_bank NULL if the bank does not exist
- * @returns The struct flash_bank located at @a addr, or NULL.
+ * @param result_bank The struct flash_bank located at @a addr, or NULL.
+ * @returns ERROR_OK on success, or an error indicating the problem.
*/
-int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check,
+int get_flash_bank_by_addr(struct target *target, target_addr_t addr, bool check,
struct flash_bank **result_bank);
/**
* Allocate and fill an array of sectors or protection blocks.
* @param num_blocks Number of blocks in array.
* @returns A struct flash_sector pointer or NULL when allocation failed.
*/
-struct flash_sector *alloc_block_array(uint32_t offset, uint32_t size, int num_blocks);
+struct flash_sector *alloc_block_array(uint32_t offset, uint32_t size,
+ unsigned int num_blocks);
#endif /* OPENOCD_FLASH_NOR_CORE_H */
Code Review / openocd.git / blobdiff