flash Kinetis: add KL28 device

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 59d2d4f1a0b4b53cd5d35e097998a5025508a117..d26c55a68366e15377a7f4a3d213313debc5c724 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -5361,15 +5361,28 @@ nor is Chip Erase (only Sector Erase is implemented).}
 
 @deffn {Flash Driver} kinetis
 @cindex kinetis
-Kx and KLx members of the Kinetis microcontroller family from Freescale include
+Kx, KLx, KVx and KE1x members of the Kinetis microcontroller family
+from NXP (former Freescale) include
 internal flash and use ARM Cortex-M0+ or M4 cores. The driver automatically
 recognizes flash size and a number of flash banks (1-4) using the chip
 identification register, and autoconfigures itself.
+Use kinetis_ke driver for KE0x devices.
+
+The @var{kinetis} driver defines option:
+@itemize
+@item -sim-base @var{addr} ... base of System Integration Module where chip identification resides. Driver tries two known locations if option is omitted.
+@end itemize
 
 @example
 flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
 @end example
 
+@deffn Command {kinetis create_banks}
+Configuration command enables automatic creation of additional flash banks
+based on real flash layout of device. Banks are created during device probe.
+Use 'flash probe 0' to force probe.
+@end deffn
+
 @deffn Command {kinetis fcf_source} [protection|write]
 Select what source is used when writing to a Flash Configuration Field.
 @option{protection} mode builds FCF content from protection bits previously
@@ -5446,10 +5459,11 @@ Command disables watchdog timer.
 
 @deffn {Flash Driver} kinetis_ke
 @cindex kinetis_ke
-KE members of the Kinetis microcontroller family from Freescale include
+KE0x members of the Kinetis microcontroller family from Freescale include
 internal flash and use ARM Cortex-M0+. The driver automatically recognizes
-the KE family and sub-family using the chip identification register, and
+the KE0x sub-family using the chip identification register, and
 autoconfigures itself.
+Use kinetis (not kinetis_ke) driver for KE1x devices.
 
 @example
 flash bank $_FLASHNAME kinetis_ke 0 0 0 0 $_TARGETNAME