and target chip, but you need a new board-specific config file
giving access to your particular flash chips.
Or you might need to write another target chip configuration file
-for a new chip built around the Cortex M3 core.
+for a new chip built around the Cortex-M3 core.
@quotation Note
When you write new configuration files, please submit
@deffn {Flash Driver} efm32
All members of the EFM32 microcontroller family from Energy Micro include
-internal flash and use ARM Cortex M3 cores. The driver automatically recognizes
+internal flash and use ARM Cortex-M3 cores. The driver automatically recognizes
a number of these chips using the chip identification register, and
autoconfigures itself.
@example
@deffn {Flash Driver} fm3
All members of the FM3 microcontroller family from Fujitsu
-include internal flash and use ARM Cortex M3 cores.
+include internal flash and use ARM Cortex-M3 cores.
The @var{fm3} driver uses the @var{target} parameter to select the
correct bank config, it can currently be one of the following:
@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
@end example
@end deffn
+@deffn {Flash Driver} fm4
+All members of the FM4 microcontroller family from Spansion (formerly Fujitsu)
+include internal flash and use ARM Cortex-M4 cores.
+The @var{fm4} driver uses a @var{family} parameter to select the
+correct bank config, it can currently be one of the following:
+@code{MB9BFx64}, @code{MB9BFx65}, @code{MB9BFx66}, @code{MB9BFx67}, @code{MB9BFx68},
+@code{S6E2Cx8}, @code{S6E2Cx9}, @code{S6E2CxA} or @code{S6E2Dx},
+with @code{x} treated as wildcard and otherwise case (and any trailing
+characters) ignored.
+
+@example
+flash bank $@{_FLASHNAME@}0 fm4 0x00000000 0 0 0 $_TARGETNAME S6E2CCAJ0A
+flash bank $@{_FLASHNAME@}1 fm4 0x00100000 0 0 0 $_TARGETNAME S6E2CCAJ0A
+@end example
+@emph{The current implementation is incomplete. Protection is not supported,
+nor is Chip Erase (only Sector Erase is implemented).}
+@end deffn
+
@deffn {Flash Driver} kinetis
@cindex kinetis
Kx and KLx members of the Kinetis microcontroller family from Freescale include
-internal flash and use ARM Cortex M0+ or M4 cores. The driver automatically
+internal flash and use ARM Cortex-M0+ or M4 cores. The driver automatically
recognizes flash size and a number of flash banks (1-4) using the chip
identification register, and autoconfigures itself.
@deffn {Flash Driver} kinetis_ke
@cindex kinetis_ke
KE members of the Kinetis microcontroller family from Freescale include
-internal flash and use ARM Cortex M0+. The driver automatically recognizes
+internal flash and use ARM Cortex-M0+. The driver automatically recognizes
the KE family and sub-family using the chip identification register, and
autoconfigures itself.
@end deffn
@end deffn
-@deffn {Flash Driver} fm4
-All members of the FM4 microcontroller family from Spansion (formerly Fujitsu)
-include internal flash and use ARM Cortex-M4 cores.
-The @var{fm4} driver uses a @var{family} parameter to select the
-correct bank config, it can currently be one of the following:
-@code{MB9BFx64}, @code{MB9BFx65}, @code{MB9BFx66}, @code{MB9BFx67}, @code{MB9BFx68},
-@code{S6E2Cx8}, @code{S6E2Cx9}, @code{S6E2CxA} or @code{S6E2Dx},
-with @code{x} treated as wildcard and otherwise case (and any trailing
-characters) ignored.
-
-@example
-flash bank $@{_FLASHNAME@}0 fm4 0x00000000 0 0 0 $_TARGETNAME S6E2CCAJ0A
-flash bank $@{_FLASHNAME@}1 fm4 0x00100000 0 0 0 $_TARGETNAME S6E2CCAJ0A
-@end example
-@emph{The current implementation is incomplete. Protection is not supported,
-nor is Chip Erase (only Sector Erase is implemented).}
-@end deffn
-
@deffn {Flash Driver} lpc2000
This is the driver to support internal flash of all members of the
LPC11(x)00 and LPC1300 microcontroller families and most members of
@deffn {Flash Driver} psoc4
All members of the PSoC 41xx/42xx microcontroller family from Cypress
-include internal flash and use ARM Cortex M0 cores.
+include internal flash and use ARM Cortex-M0 cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
@deffn {Flash Driver} sim3x
All members of the SiM3 microcontroller family from Silicon Laboratories
-include internal flash and use ARM Cortex M3 cores. It supports both JTAG
+include internal flash and use ARM Cortex-M3 cores. It supports both JTAG
and SWD interface.
The @var{sim3x} driver tries to probe the device to auto detect the MCU.
If this failes, it will use the @var{size} parameter as the size of flash bank.