1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
25 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
27 ***************************************************************************/
32 #include "jtag/interface.h"
33 #include "breakpoints.h"
35 #include "target_request.h"
36 #include "target_type.h"
37 #include "arm_disassembler.h"
39 #include "arm_opcodes.h"
40 #include "arm_semihosting.h"
41 #include <helper/time_support.h>
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FPB remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
54 /* forward declarations */
55 static int cortex_m_store_core_reg_u32(struct target
*target
,
56 uint32_t num
, uint32_t value
);
57 static void cortex_m_dwt_free(struct target
*target
);
59 static int cortexm_dap_read_coreregister_u32(struct target
*target
,
60 uint32_t *value
, int regnum
)
62 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
66 /* because the DCB_DCRDR is used for the emulated dcc channel
67 * we have to save/restore the DCB_DCRDR when used */
68 if (target
->dbg_msg_enabled
) {
69 retval
= mem_ap_read_u32(armv7m
->debug_ap
, DCB_DCRDR
, &dcrdr
);
70 if (retval
!= ERROR_OK
)
74 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRSR
, regnum
);
75 if (retval
!= ERROR_OK
)
78 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, value
);
79 if (retval
!= ERROR_OK
)
82 if (target
->dbg_msg_enabled
) {
83 /* restore DCB_DCRDR - this needs to be in a separate
84 * transaction otherwise the emulated DCC channel breaks */
85 if (retval
== ERROR_OK
)
86 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, dcrdr
);
92 static int cortexm_dap_write_coreregister_u32(struct target
*target
,
93 uint32_t value
, int regnum
)
95 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
99 /* because the DCB_DCRDR is used for the emulated dcc channel
100 * we have to save/restore the DCB_DCRDR when used */
101 if (target
->dbg_msg_enabled
) {
102 retval
= mem_ap_read_u32(armv7m
->debug_ap
, DCB_DCRDR
, &dcrdr
);
103 if (retval
!= ERROR_OK
)
107 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, value
);
108 if (retval
!= ERROR_OK
)
111 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRSR
, regnum
| DCRSR_WnR
);
112 if (retval
!= ERROR_OK
)
115 if (target
->dbg_msg_enabled
) {
116 /* restore DCB_DCRDR - this needs to be in a seperate
117 * transaction otherwise the emulated DCC channel breaks */
118 if (retval
== ERROR_OK
)
119 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, dcrdr
);
125 static int cortex_m_write_debug_halt_mask(struct target
*target
,
126 uint32_t mask_on
, uint32_t mask_off
)
128 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
129 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
131 /* mask off status bits */
132 cortex_m
->dcb_dhcsr
&= ~((0xFFFF << 16) | mask_off
);
133 /* create new register mask */
134 cortex_m
->dcb_dhcsr
|= DBGKEY
| C_DEBUGEN
| mask_on
;
136 return mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, cortex_m
->dcb_dhcsr
);
139 static int cortex_m_clear_halt(struct target
*target
)
141 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
142 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
145 /* clear step if any */
146 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_STEP
);
148 /* Read Debug Fault Status Register */
149 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
, &cortex_m
->nvic_dfsr
);
150 if (retval
!= ERROR_OK
)
153 /* Clear Debug Fault Status */
154 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
, cortex_m
->nvic_dfsr
);
155 if (retval
!= ERROR_OK
)
157 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32
"", cortex_m
->nvic_dfsr
);
162 static int cortex_m_single_step_core(struct target
*target
)
164 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
165 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
168 /* Mask interrupts before clearing halt, if not done already. This avoids
169 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
170 * HALT can put the core into an unknown state.
172 if (!(cortex_m
->dcb_dhcsr
& C_MASKINTS
)) {
173 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
,
174 DBGKEY
| C_MASKINTS
| C_HALT
| C_DEBUGEN
);
175 if (retval
!= ERROR_OK
)
178 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
,
179 DBGKEY
| C_MASKINTS
| C_STEP
| C_DEBUGEN
);
180 if (retval
!= ERROR_OK
)
184 /* restore dhcsr reg */
185 cortex_m_clear_halt(target
);
190 static int cortex_m_enable_fpb(struct target
*target
)
192 int retval
= target_write_u32(target
, FP_CTRL
, 3);
193 if (retval
!= ERROR_OK
)
196 /* check the fpb is actually enabled */
198 retval
= target_read_u32(target
, FP_CTRL
, &fpctrl
);
199 if (retval
!= ERROR_OK
)
208 static int cortex_m_endreset_event(struct target
*target
)
213 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
214 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
215 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
216 struct cortex_m_fp_comparator
*fp_list
= cortex_m
->fp_comparator_list
;
217 struct cortex_m_dwt_comparator
*dwt_list
= cortex_m
->dwt_comparator_list
;
219 /* REVISIT The four debug monitor bits are currently ignored... */
220 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &dcb_demcr
);
221 if (retval
!= ERROR_OK
)
223 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32
"", dcb_demcr
);
225 /* this register is used for emulated dcc channel */
226 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, 0);
227 if (retval
!= ERROR_OK
)
230 /* Enable debug requests */
231 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
232 if (retval
!= ERROR_OK
)
234 if (!(cortex_m
->dcb_dhcsr
& C_DEBUGEN
)) {
235 retval
= cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
| C_MASKINTS
);
236 if (retval
!= ERROR_OK
)
240 /* Restore proper interrupt masking setting. */
241 if (cortex_m
->isrmasking_mode
== CORTEX_M_ISRMASK_ON
)
242 cortex_m_write_debug_halt_mask(target
, C_MASKINTS
, 0);
244 cortex_m_write_debug_halt_mask(target
, 0, C_MASKINTS
);
246 /* Enable features controlled by ITM and DWT blocks, and catch only
247 * the vectors we were told to pay attention to.
249 * Target firmware is responsible for all fault handling policy
250 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
251 * or manual updates to the NVIC SHCSR and CCR registers.
253 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
254 if (retval
!= ERROR_OK
)
257 /* Paranoia: evidently some (early?) chips don't preserve all the
258 * debug state (including FPB, DWT, etc) across reset...
262 retval
= cortex_m_enable_fpb(target
);
263 if (retval
!= ERROR_OK
) {
264 LOG_ERROR("Failed to enable the FPB");
268 cortex_m
->fpb_enabled
= 1;
270 /* Restore FPB registers */
271 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
272 retval
= target_write_u32(target
, fp_list
[i
].fpcr_address
, fp_list
[i
].fpcr_value
);
273 if (retval
!= ERROR_OK
)
277 /* Restore DWT registers */
278 for (i
= 0; i
< cortex_m
->dwt_num_comp
; i
++) {
279 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 0,
281 if (retval
!= ERROR_OK
)
283 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 4,
285 if (retval
!= ERROR_OK
)
287 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 8,
288 dwt_list
[i
].function
);
289 if (retval
!= ERROR_OK
)
292 retval
= dap_run(swjdp
);
293 if (retval
!= ERROR_OK
)
296 register_cache_invalidate(armv7m
->arm
.core_cache
);
298 /* make sure we have latest dhcsr flags */
299 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
304 static int cortex_m_examine_debug_reason(struct target
*target
)
306 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
308 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
309 * only check the debug reason if we don't know it already */
311 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
)
312 && (target
->debug_reason
!= DBG_REASON_SINGLESTEP
)) {
313 if (cortex_m
->nvic_dfsr
& DFSR_BKPT
) {
314 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
315 if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
316 target
->debug_reason
= DBG_REASON_WPTANDBKPT
;
317 } else if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
318 target
->debug_reason
= DBG_REASON_WATCHPOINT
;
319 else if (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)
320 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
321 else /* EXTERNAL, HALTED */
322 target
->debug_reason
= DBG_REASON_UNDEFINED
;
328 static int cortex_m_examine_exception_reason(struct target
*target
)
330 uint32_t shcsr
= 0, except_sr
= 0, cfsr
= -1, except_ar
= -1;
331 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
332 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
335 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_SHCSR
, &shcsr
);
336 if (retval
!= ERROR_OK
)
338 switch (armv7m
->exception_number
) {
341 case 3: /* Hard Fault */
342 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_HFSR
, &except_sr
);
343 if (retval
!= ERROR_OK
)
345 if (except_sr
& 0x40000000) {
346 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &cfsr
);
347 if (retval
!= ERROR_OK
)
351 case 4: /* Memory Management */
352 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
353 if (retval
!= ERROR_OK
)
355 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_MMFAR
, &except_ar
);
356 if (retval
!= ERROR_OK
)
359 case 5: /* Bus Fault */
360 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
361 if (retval
!= ERROR_OK
)
363 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_BFAR
, &except_ar
);
364 if (retval
!= ERROR_OK
)
367 case 6: /* Usage Fault */
368 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
369 if (retval
!= ERROR_OK
)
372 case 11: /* SVCall */
374 case 12: /* Debug Monitor */
375 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_DFSR
, &except_sr
);
376 if (retval
!= ERROR_OK
)
379 case 14: /* PendSV */
381 case 15: /* SysTick */
387 retval
= dap_run(swjdp
);
388 if (retval
== ERROR_OK
)
389 LOG_DEBUG("%s SHCSR 0x%" PRIx32
", SR 0x%" PRIx32
390 ", CFSR 0x%" PRIx32
", AR 0x%" PRIx32
,
391 armv7m_exception_string(armv7m
->exception_number
),
392 shcsr
, except_sr
, cfsr
, except_ar
);
396 static int cortex_m_debug_entry(struct target
*target
)
401 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
402 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
403 struct arm
*arm
= &armv7m
->arm
;
408 cortex_m_clear_halt(target
);
409 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
410 if (retval
!= ERROR_OK
)
413 retval
= armv7m
->examine_debug_reason(target
);
414 if (retval
!= ERROR_OK
)
417 /* Examine target state and mode
418 * First load register accessible through core debug port */
419 int num_regs
= arm
->core_cache
->num_regs
;
421 for (i
= 0; i
< num_regs
; i
++) {
422 r
= &armv7m
->arm
.core_cache
->reg_list
[i
];
424 arm
->read_core_reg(target
, r
, i
, ARM_MODE_ANY
);
428 xPSR
= buf_get_u32(r
->value
, 0, 32);
430 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
433 cortex_m_store_core_reg_u32(target
, 16, xPSR
& ~0xff);
436 /* Are we in an exception handler */
438 armv7m
->exception_number
= (xPSR
& 0x1FF);
440 arm
->core_mode
= ARM_MODE_HANDLER
;
441 arm
->map
= armv7m_msp_reg_map
;
443 unsigned control
= buf_get_u32(arm
->core_cache
444 ->reg_list
[ARMV7M_CONTROL
].value
, 0, 2);
446 /* is this thread privileged? */
447 arm
->core_mode
= control
& 1
448 ? ARM_MODE_USER_THREAD
451 /* which stack is it using? */
453 arm
->map
= armv7m_psp_reg_map
;
455 arm
->map
= armv7m_msp_reg_map
;
457 armv7m
->exception_number
= 0;
460 if (armv7m
->exception_number
)
461 cortex_m_examine_exception_reason(target
);
463 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32
", target->state: %s",
464 arm_mode_name(arm
->core_mode
),
465 buf_get_u32(arm
->pc
->value
, 0, 32),
466 target_state_name(target
));
468 if (armv7m
->post_debug_entry
) {
469 retval
= armv7m
->post_debug_entry(target
);
470 if (retval
!= ERROR_OK
)
477 static int cortex_m_poll(struct target
*target
)
479 int detected_failure
= ERROR_OK
;
480 int retval
= ERROR_OK
;
481 enum target_state prev_target_state
= target
->state
;
482 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
483 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
485 /* Read from Debug Halting Control and Status Register */
486 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
487 if (retval
!= ERROR_OK
) {
488 target
->state
= TARGET_UNKNOWN
;
492 /* Recover from lockup. See ARMv7-M architecture spec,
493 * section B1.5.15 "Unrecoverable exception cases".
495 if (cortex_m
->dcb_dhcsr
& S_LOCKUP
) {
496 LOG_ERROR("%s -- clearing lockup after double fault",
497 target_name(target
));
498 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
499 target
->debug_reason
= DBG_REASON_DBGRQ
;
501 /* We have to execute the rest (the "finally" equivalent, but
502 * still throw this exception again).
504 detected_failure
= ERROR_FAIL
;
506 /* refresh status bits */
507 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
508 if (retval
!= ERROR_OK
)
512 if (cortex_m
->dcb_dhcsr
& S_RESET_ST
) {
513 if (target
->state
!= TARGET_RESET
) {
514 target
->state
= TARGET_RESET
;
515 LOG_INFO("%s: external reset detected", target_name(target
));
520 if (target
->state
== TARGET_RESET
) {
521 /* Cannot switch context while running so endreset is
522 * called with target->state == TARGET_RESET
524 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32
,
525 cortex_m
->dcb_dhcsr
);
526 retval
= cortex_m_endreset_event(target
);
527 if (retval
!= ERROR_OK
) {
528 target
->state
= TARGET_UNKNOWN
;
531 target
->state
= TARGET_RUNNING
;
532 prev_target_state
= TARGET_RUNNING
;
535 if (cortex_m
->dcb_dhcsr
& S_HALT
) {
536 target
->state
= TARGET_HALTED
;
538 if ((prev_target_state
== TARGET_RUNNING
) || (prev_target_state
== TARGET_RESET
)) {
539 retval
= cortex_m_debug_entry(target
);
540 if (retval
!= ERROR_OK
)
543 if (arm_semihosting(target
, &retval
) != 0)
546 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
548 if (prev_target_state
== TARGET_DEBUG_RUNNING
) {
550 retval
= cortex_m_debug_entry(target
);
551 if (retval
!= ERROR_OK
)
554 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
);
558 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
559 * How best to model low power modes?
562 if (target
->state
== TARGET_UNKNOWN
) {
563 /* check if processor is retiring instructions */
564 if (cortex_m
->dcb_dhcsr
& S_RETIRE_ST
) {
565 target
->state
= TARGET_RUNNING
;
570 /* Check that target is truly halted, since the target could be resumed externally */
571 if ((prev_target_state
== TARGET_HALTED
) && !(cortex_m
->dcb_dhcsr
& S_HALT
)) {
572 /* registers are now invalid */
573 register_cache_invalidate(armv7m
->arm
.core_cache
);
575 target
->state
= TARGET_RUNNING
;
576 LOG_WARNING("%s: external resume detected", target_name(target
));
577 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
581 /* Did we detect a failure condition that we cleared? */
582 if (detected_failure
!= ERROR_OK
)
583 retval
= detected_failure
;
587 static int cortex_m_halt(struct target
*target
)
589 LOG_DEBUG("target->state: %s",
590 target_state_name(target
));
592 if (target
->state
== TARGET_HALTED
) {
593 LOG_DEBUG("target was already halted");
597 if (target
->state
== TARGET_UNKNOWN
)
598 LOG_WARNING("target was in unknown state when halt was requested");
600 if (target
->state
== TARGET_RESET
) {
601 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST
) && jtag_get_srst()) {
602 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
603 return ERROR_TARGET_FAILURE
;
605 /* we came here in a reset_halt or reset_init sequence
606 * debug entry was already prepared in cortex_m3_assert_reset()
608 target
->debug_reason
= DBG_REASON_DBGRQ
;
614 /* Write to Debug Halting Control and Status Register */
615 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
617 target
->debug_reason
= DBG_REASON_DBGRQ
;
622 static int cortex_m_soft_reset_halt(struct target
*target
)
624 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
625 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
626 uint32_t dcb_dhcsr
= 0;
627 int retval
, timeout
= 0;
629 /* soft_reset_halt is deprecated on cortex_m as the same functionality
630 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'
631 * As this reset only used VC_CORERESET it would only ever reset the cortex_m
632 * core, not the peripherals */
633 LOG_WARNING("soft_reset_halt is deprecated, please use 'reset halt' instead.");
635 /* Enter debug state on reset; restore DEMCR in endreset_event() */
636 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
,
637 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
638 if (retval
!= ERROR_OK
)
641 /* Request a core-only reset */
642 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
,
643 AIRCR_VECTKEY
| AIRCR_VECTRESET
);
644 if (retval
!= ERROR_OK
)
646 target
->state
= TARGET_RESET
;
648 /* registers are now invalid */
649 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
651 while (timeout
< 100) {
652 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &dcb_dhcsr
);
653 if (retval
== ERROR_OK
) {
654 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
,
655 &cortex_m
->nvic_dfsr
);
656 if (retval
!= ERROR_OK
)
658 if ((dcb_dhcsr
& S_HALT
)
659 && (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)) {
660 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
662 (unsigned) dcb_dhcsr
,
663 (unsigned) cortex_m
->nvic_dfsr
);
664 cortex_m_poll(target
);
665 /* FIXME restore user's vector catch config */
668 LOG_DEBUG("waiting for system reset-halt, "
669 "DHCSR 0x%08x, %d ms",
670 (unsigned) dcb_dhcsr
, timeout
);
679 void cortex_m_enable_breakpoints(struct target
*target
)
681 struct breakpoint
*breakpoint
= target
->breakpoints
;
683 /* set any pending breakpoints */
685 if (!breakpoint
->set
)
686 cortex_m_set_breakpoint(target
, breakpoint
);
687 breakpoint
= breakpoint
->next
;
691 static int cortex_m_resume(struct target
*target
, int current
,
692 target_addr_t address
, int handle_breakpoints
, int debug_execution
)
694 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
695 struct breakpoint
*breakpoint
= NULL
;
699 if (target
->state
!= TARGET_HALTED
) {
700 LOG_WARNING("target not halted");
701 return ERROR_TARGET_NOT_HALTED
;
704 if (!debug_execution
) {
705 target_free_all_working_areas(target
);
706 cortex_m_enable_breakpoints(target
);
707 cortex_m_enable_watchpoints(target
);
710 if (debug_execution
) {
711 r
= armv7m
->arm
.core_cache
->reg_list
+ ARMV7M_PRIMASK
;
713 /* Disable interrupts */
714 /* We disable interrupts in the PRIMASK register instead of
715 * masking with C_MASKINTS. This is probably the same issue
716 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
717 * in parallel with disabled interrupts can cause local faults
720 * REVISIT this clearly breaks non-debug execution, since the
721 * PRIMASK register state isn't saved/restored... workaround
722 * by never resuming app code after debug execution.
724 buf_set_u32(r
->value
, 0, 1, 1);
728 /* Make sure we are in Thumb mode */
729 r
= armv7m
->arm
.cpsr
;
730 buf_set_u32(r
->value
, 24, 1, 1);
735 /* current = 1: continue on current pc, otherwise continue at <address> */
738 buf_set_u32(r
->value
, 0, 32, address
);
743 /* if we halted last time due to a bkpt instruction
744 * then we have to manually step over it, otherwise
745 * the core will break again */
747 if (!breakpoint_find(target
, buf_get_u32(r
->value
, 0, 32))
749 armv7m_maybe_skip_bkpt_inst(target
, NULL
);
751 resume_pc
= buf_get_u32(r
->value
, 0, 32);
753 armv7m_restore_context(target
);
755 /* the front-end may request us not to handle breakpoints */
756 if (handle_breakpoints
) {
757 /* Single step past breakpoint at current address */
758 breakpoint
= breakpoint_find(target
, resume_pc
);
760 LOG_DEBUG("unset breakpoint at " TARGET_ADDR_FMT
" (ID: %" PRIu32
")",
762 breakpoint
->unique_id
);
763 cortex_m_unset_breakpoint(target
, breakpoint
);
764 cortex_m_single_step_core(target
);
765 cortex_m_set_breakpoint(target
, breakpoint
);
770 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
772 target
->debug_reason
= DBG_REASON_NOTHALTED
;
774 /* registers are now invalid */
775 register_cache_invalidate(armv7m
->arm
.core_cache
);
777 if (!debug_execution
) {
778 target
->state
= TARGET_RUNNING
;
779 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
780 LOG_DEBUG("target resumed at 0x%" PRIx32
"", resume_pc
);
782 target
->state
= TARGET_DEBUG_RUNNING
;
783 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
);
784 LOG_DEBUG("target debug resumed at 0x%" PRIx32
"", resume_pc
);
790 /* int irqstepcount = 0; */
791 static int cortex_m_step(struct target
*target
, int current
,
792 target_addr_t address
, int handle_breakpoints
)
794 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
795 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
796 struct breakpoint
*breakpoint
= NULL
;
797 struct reg
*pc
= armv7m
->arm
.pc
;
798 bool bkpt_inst_found
= false;
800 bool isr_timed_out
= false;
802 if (target
->state
!= TARGET_HALTED
) {
803 LOG_WARNING("target not halted");
804 return ERROR_TARGET_NOT_HALTED
;
807 /* current = 1: continue on current pc, otherwise continue at <address> */
809 buf_set_u32(pc
->value
, 0, 32, address
);
811 uint32_t pc_value
= buf_get_u32(pc
->value
, 0, 32);
813 /* the front-end may request us not to handle breakpoints */
814 if (handle_breakpoints
) {
815 breakpoint
= breakpoint_find(target
, pc_value
);
817 cortex_m_unset_breakpoint(target
, breakpoint
);
820 armv7m_maybe_skip_bkpt_inst(target
, &bkpt_inst_found
);
822 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
824 armv7m_restore_context(target
);
826 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
828 /* if no bkpt instruction is found at pc then we can perform
829 * a normal step, otherwise we have to manually step over the bkpt
830 * instruction - as such simulate a step */
831 if (bkpt_inst_found
== false) {
832 /* Automatic ISR masking mode off: Just step over the next instruction */
833 if ((cortex_m
->isrmasking_mode
!= CORTEX_M_ISRMASK_AUTO
))
834 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
836 /* Process interrupts during stepping in a way they don't interfere
841 * Set a temporary break point at the current pc and let the core run
842 * with interrupts enabled. Pending interrupts get served and we run
843 * into the breakpoint again afterwards. Then we step over the next
844 * instruction with interrupts disabled.
846 * If the pending interrupts don't complete within time, we leave the
847 * core running. This may happen if the interrupts trigger faster
848 * than the core can process them or the handler doesn't return.
850 * If no more breakpoints are available we simply do a step with
851 * interrupts enabled.
857 * If a break point is already set on the lower half word then a break point on
858 * the upper half word will not break again when the core is restarted. So we
859 * just step over the instruction with interrupts disabled.
861 * The documentation has no information about this, it was found by observation
862 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
863 * suffer from this problem.
865 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
866 * address has it always cleared. The former is done to indicate thumb mode
870 if ((pc_value
& 0x02) && breakpoint_find(target
, pc_value
& ~0x03)) {
871 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
872 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
873 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
874 /* Re-enable interrupts */
875 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
879 /* Set a temporary break point */
881 retval
= cortex_m_set_breakpoint(target
, breakpoint
);
883 retval
= breakpoint_add(target
, pc_value
, 2, BKPT_HARD
);
884 bool tmp_bp_set
= (retval
== ERROR_OK
);
886 /* No more breakpoints left, just do a step */
888 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
891 LOG_DEBUG("Starting core to serve pending interrupts");
892 int64_t t_start
= timeval_ms();
893 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
);
895 /* Wait for pending handlers to complete or timeout */
897 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
,
899 &cortex_m
->dcb_dhcsr
);
900 if (retval
!= ERROR_OK
) {
901 target
->state
= TARGET_UNKNOWN
;
904 isr_timed_out
= ((timeval_ms() - t_start
) > 500);
905 } while (!((cortex_m
->dcb_dhcsr
& S_HALT
) || isr_timed_out
));
907 /* only remove breakpoint if we created it */
909 cortex_m_unset_breakpoint(target
, breakpoint
);
911 /* Remove the temporary breakpoint */
912 breakpoint_remove(target
, pc_value
);
916 LOG_DEBUG("Interrupt handlers didn't complete within time, "
917 "leaving target running");
919 /* Step over next instruction with interrupts disabled */
920 cortex_m_write_debug_halt_mask(target
,
923 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
924 /* Re-enable interrupts */
925 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
932 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
933 if (retval
!= ERROR_OK
)
936 /* registers are now invalid */
937 register_cache_invalidate(armv7m
->arm
.core_cache
);
940 cortex_m_set_breakpoint(target
, breakpoint
);
943 /* Leave the core running. The user has to stop execution manually. */
944 target
->debug_reason
= DBG_REASON_NOTHALTED
;
945 target
->state
= TARGET_RUNNING
;
949 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
950 " nvic_icsr = 0x%" PRIx32
,
951 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
953 retval
= cortex_m_debug_entry(target
);
954 if (retval
!= ERROR_OK
)
956 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
958 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
959 " nvic_icsr = 0x%" PRIx32
,
960 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
965 static int cortex_m_assert_reset(struct target
*target
)
967 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
968 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
969 enum cortex_m_soft_reset_config reset_config
= cortex_m
->soft_reset_config
;
971 LOG_DEBUG("target->state: %s",
972 target_state_name(target
));
974 enum reset_types jtag_reset_config
= jtag_get_reset_config();
976 if (target_has_event_action(target
, TARGET_EVENT_RESET_ASSERT
)) {
977 /* allow scripts to override the reset event */
979 target_handle_event(target
, TARGET_EVENT_RESET_ASSERT
);
980 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
981 target
->state
= TARGET_RESET
;
986 /* some cores support connecting while srst is asserted
987 * use that mode is it has been configured */
989 bool srst_asserted
= false;
991 if (!target_was_examined(target
)) {
992 if (jtag_reset_config
& RESET_HAS_SRST
) {
993 adapter_assert_reset();
994 if (target
->reset_halt
)
995 LOG_ERROR("Target not examined, will not halt after reset!");
998 LOG_ERROR("Target not examined, reset NOT asserted!");
1003 if ((jtag_reset_config
& RESET_HAS_SRST
) &&
1004 (jtag_reset_config
& RESET_SRST_NO_GATING
)) {
1005 adapter_assert_reset();
1006 srst_asserted
= true;
1009 /* Enable debug requests */
1011 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
1012 /* Store important errors instead of failing and proceed to reset assert */
1014 if (retval
!= ERROR_OK
|| !(cortex_m
->dcb_dhcsr
& C_DEBUGEN
))
1015 retval
= cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
| C_MASKINTS
);
1017 /* If the processor is sleeping in a WFI or WFE instruction, the
1018 * C_HALT bit must be asserted to regain control */
1019 if (retval
== ERROR_OK
&& (cortex_m
->dcb_dhcsr
& S_SLEEP
))
1020 retval
= cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
1022 mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, 0);
1023 /* Ignore less important errors */
1025 if (!target
->reset_halt
) {
1026 /* Set/Clear C_MASKINTS in a separate operation */
1027 if (cortex_m
->dcb_dhcsr
& C_MASKINTS
)
1028 cortex_m_write_debug_halt_mask(target
, 0, C_MASKINTS
);
1030 /* clear any debug flags before resuming */
1031 cortex_m_clear_halt(target
);
1033 /* clear C_HALT in dhcsr reg */
1034 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
1036 /* Halt in debug on reset; endreset_event() restores DEMCR.
1038 * REVISIT catching BUSERR presumably helps to defend against
1039 * bad vector table entries. Should this include MMERR or
1043 retval2
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
,
1044 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
1045 if (retval
!= ERROR_OK
|| retval2
!= ERROR_OK
)
1046 LOG_INFO("AP write error, reset will not halt");
1049 if (jtag_reset_config
& RESET_HAS_SRST
) {
1050 /* default to asserting srst */
1052 adapter_assert_reset();
1054 /* srst is asserted, ignore AP access errors */
1057 /* Use a standard Cortex-M3 software reset mechanism.
1058 * We default to using VECRESET as it is supported on all current cores
1059 * (except Cortex-M0, M0+ and M1 which support SYSRESETREQ only!)
1060 * This has the disadvantage of not resetting the peripherals, so a
1061 * reset-init event handler is needed to perform any peripheral resets.
1063 if (!cortex_m
->vectreset_supported
1064 && reset_config
== CORTEX_M_RESET_VECTRESET
) {
1065 reset_config
= CORTEX_M_RESET_SYSRESETREQ
;
1066 LOG_WARNING("VECTRESET is not supported on this Cortex-M core, using SYSRESETREQ instead.");
1067 LOG_WARNING("Set 'cortex_m reset_config sysresetreq'.");
1070 LOG_DEBUG("Using Cortex-M %s", (reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1071 ? "SYSRESETREQ" : "VECTRESET");
1073 if (reset_config
== CORTEX_M_RESET_VECTRESET
) {
1074 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1075 "handler to reset any peripherals or configure hardware srst support.");
1079 retval3
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
,
1080 AIRCR_VECTKEY
| ((reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1081 ? AIRCR_SYSRESETREQ
: AIRCR_VECTRESET
));
1082 if (retval3
!= ERROR_OK
)
1083 LOG_DEBUG("Ignoring AP write error right after reset");
1085 retval3
= dap_dp_init(armv7m
->debug_ap
->dap
);
1086 if (retval3
!= ERROR_OK
)
1087 LOG_ERROR("DP initialisation failed");
1090 /* I do not know why this is necessary, but it
1091 * fixes strange effects (step/resume cause NMI
1092 * after reset) on LM3S6918 -- Michael Schwingen
1095 mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
, &tmp
);
1099 target
->state
= TARGET_RESET
;
1100 jtag_add_sleep(50000);
1102 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
1104 /* now return stored error code if any */
1105 if (retval
!= ERROR_OK
)
1108 if (target
->reset_halt
) {
1109 retval
= target_halt(target
);
1110 if (retval
!= ERROR_OK
)
1117 static int cortex_m_deassert_reset(struct target
*target
)
1119 struct armv7m_common
*armv7m
= &target_to_cm(target
)->armv7m
;
1121 LOG_DEBUG("target->state: %s",
1122 target_state_name(target
));
1124 /* deassert reset lines */
1125 adapter_deassert_reset();
1127 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1129 if ((jtag_reset_config
& RESET_HAS_SRST
) &&
1130 !(jtag_reset_config
& RESET_SRST_NO_GATING
) &&
1131 target_was_examined(target
)) {
1132 int retval
= dap_dp_init(armv7m
->debug_ap
->dap
);
1133 if (retval
!= ERROR_OK
) {
1134 LOG_ERROR("DP initialisation failed");
1142 int cortex_m_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1146 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1147 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1149 if (breakpoint
->set
) {
1150 LOG_WARNING("breakpoint (BPID: %" PRIu32
") already set", breakpoint
->unique_id
);
1154 if (breakpoint
->type
== BKPT_HARD
) {
1155 uint32_t fpcr_value
;
1156 while (comparator_list
[fp_num
].used
&& (fp_num
< cortex_m
->fp_num_code
))
1158 if (fp_num
>= cortex_m
->fp_num_code
) {
1159 LOG_ERROR("Can not find free FPB Comparator!");
1162 breakpoint
->set
= fp_num
+ 1;
1163 fpcr_value
= breakpoint
->address
| 1;
1164 if (cortex_m
->fp_rev
== 0) {
1165 if (breakpoint
->address
> 0x1FFFFFFF) {
1166 LOG_ERROR("Cortex-M Flash Patch Breakpoint rev.1 cannot handle HW breakpoint above address 0x1FFFFFFE");
1170 hilo
= (breakpoint
->address
& 0x2) ? FPCR_REPLACE_BKPT_HIGH
: FPCR_REPLACE_BKPT_LOW
;
1171 fpcr_value
= (fpcr_value
& 0x1FFFFFFC) | hilo
| 1;
1172 } else if (cortex_m
->fp_rev
> 1) {
1173 LOG_ERROR("Unhandled Cortex-M Flash Patch Breakpoint architecture revision");
1176 comparator_list
[fp_num
].used
= 1;
1177 comparator_list
[fp_num
].fpcr_value
= fpcr_value
;
1178 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1179 comparator_list
[fp_num
].fpcr_value
);
1180 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32
"",
1182 comparator_list
[fp_num
].fpcr_value
);
1183 if (!cortex_m
->fpb_enabled
) {
1184 LOG_DEBUG("FPB wasn't enabled, do it now");
1185 retval
= cortex_m_enable_fpb(target
);
1186 if (retval
!= ERROR_OK
) {
1187 LOG_ERROR("Failed to enable the FPB");
1191 cortex_m
->fpb_enabled
= 1;
1193 } else if (breakpoint
->type
== BKPT_SOFT
) {
1196 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1197 * semihosting; don't use that. Otherwise the BKPT
1198 * parameter is arbitrary.
1200 buf_set_u32(code
, 0, 32, ARMV5_T_BKPT(0x11));
1201 retval
= target_read_memory(target
,
1202 breakpoint
->address
& 0xFFFFFFFE,
1203 breakpoint
->length
, 1,
1204 breakpoint
->orig_instr
);
1205 if (retval
!= ERROR_OK
)
1207 retval
= target_write_memory(target
,
1208 breakpoint
->address
& 0xFFFFFFFE,
1209 breakpoint
->length
, 1,
1211 if (retval
!= ERROR_OK
)
1213 breakpoint
->set
= true;
1216 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: " TARGET_ADDR_FMT
" Length: %d (set=%d)",
1217 breakpoint
->unique_id
,
1218 (int)(breakpoint
->type
),
1219 breakpoint
->address
,
1226 int cortex_m_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1229 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1230 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1232 if (!breakpoint
->set
) {
1233 LOG_WARNING("breakpoint not set");
1237 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: " TARGET_ADDR_FMT
" Length: %d (set=%d)",
1238 breakpoint
->unique_id
,
1239 (int)(breakpoint
->type
),
1240 breakpoint
->address
,
1244 if (breakpoint
->type
== BKPT_HARD
) {
1245 int fp_num
= breakpoint
->set
- 1;
1246 if ((fp_num
< 0) || (fp_num
>= cortex_m
->fp_num_code
)) {
1247 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1250 comparator_list
[fp_num
].used
= 0;
1251 comparator_list
[fp_num
].fpcr_value
= 0;
1252 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1253 comparator_list
[fp_num
].fpcr_value
);
1255 /* restore original instruction (kept in target endianness) */
1256 if (breakpoint
->length
== 4) {
1257 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 4, 1,
1258 breakpoint
->orig_instr
);
1259 if (retval
!= ERROR_OK
)
1262 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 2, 1,
1263 breakpoint
->orig_instr
);
1264 if (retval
!= ERROR_OK
)
1268 breakpoint
->set
= false;
1273 int cortex_m_add_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1275 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1277 if ((breakpoint
->type
== BKPT_HARD
) && (cortex_m
->fp_code_available
< 1)) {
1278 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1279 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1282 if (breakpoint
->length
== 3) {
1283 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1284 breakpoint
->length
= 2;
1287 if ((breakpoint
->length
!= 2)) {
1288 LOG_INFO("only breakpoints of two bytes length supported");
1289 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1292 if (breakpoint
->type
== BKPT_HARD
)
1293 cortex_m
->fp_code_available
--;
1295 return cortex_m_set_breakpoint(target
, breakpoint
);
1298 int cortex_m_remove_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1300 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1302 /* REVISIT why check? FPB can be updated with core running ... */
1303 if (target
->state
!= TARGET_HALTED
) {
1304 LOG_WARNING("target not halted");
1305 return ERROR_TARGET_NOT_HALTED
;
1308 if (breakpoint
->set
)
1309 cortex_m_unset_breakpoint(target
, breakpoint
);
1311 if (breakpoint
->type
== BKPT_HARD
)
1312 cortex_m
->fp_code_available
++;
1317 int cortex_m_set_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1320 uint32_t mask
, temp
;
1321 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1323 /* watchpoint params were validated earlier */
1325 temp
= watchpoint
->length
;
1332 /* REVISIT Don't fully trust these "not used" records ... users
1333 * may set up breakpoints by hand, e.g. dual-address data value
1334 * watchpoint using comparator #1; comparator #0 matching cycle
1335 * count; send data trace info through ITM and TPIU; etc
1337 struct cortex_m_dwt_comparator
*comparator
;
1339 for (comparator
= cortex_m
->dwt_comparator_list
;
1340 comparator
->used
&& dwt_num
< cortex_m
->dwt_num_comp
;
1341 comparator
++, dwt_num
++)
1343 if (dwt_num
>= cortex_m
->dwt_num_comp
) {
1344 LOG_ERROR("Can not find free DWT Comparator");
1347 comparator
->used
= 1;
1348 watchpoint
->set
= dwt_num
+ 1;
1350 comparator
->comp
= watchpoint
->address
;
1351 target_write_u32(target
, comparator
->dwt_comparator_address
+ 0,
1354 comparator
->mask
= mask
;
1355 target_write_u32(target
, comparator
->dwt_comparator_address
+ 4,
1358 switch (watchpoint
->rw
) {
1360 comparator
->function
= 5;
1363 comparator
->function
= 6;
1366 comparator
->function
= 7;
1369 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1370 comparator
->function
);
1372 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1373 watchpoint
->unique_id
, dwt_num
,
1374 (unsigned) comparator
->comp
,
1375 (unsigned) comparator
->mask
,
1376 (unsigned) comparator
->function
);
1380 int cortex_m_unset_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1382 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1383 struct cortex_m_dwt_comparator
*comparator
;
1386 if (!watchpoint
->set
) {
1387 LOG_WARNING("watchpoint (wpid: %d) not set",
1388 watchpoint
->unique_id
);
1392 dwt_num
= watchpoint
->set
- 1;
1394 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1395 watchpoint
->unique_id
, dwt_num
,
1396 (unsigned) watchpoint
->address
);
1398 if ((dwt_num
< 0) || (dwt_num
>= cortex_m
->dwt_num_comp
)) {
1399 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1403 comparator
= cortex_m
->dwt_comparator_list
+ dwt_num
;
1404 comparator
->used
= 0;
1405 comparator
->function
= 0;
1406 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1407 comparator
->function
);
1409 watchpoint
->set
= false;
1414 int cortex_m_add_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1416 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1418 if (cortex_m
->dwt_comp_available
< 1) {
1419 LOG_DEBUG("no comparators?");
1420 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1423 /* hardware doesn't support data value masking */
1424 if (watchpoint
->mask
!= ~(uint32_t)0) {
1425 LOG_DEBUG("watchpoint value masks not supported");
1426 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1429 /* hardware allows address masks of up to 32K */
1432 for (mask
= 0; mask
< 16; mask
++) {
1433 if ((1u << mask
) == watchpoint
->length
)
1437 LOG_DEBUG("unsupported watchpoint length");
1438 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1440 if (watchpoint
->address
& ((1 << mask
) - 1)) {
1441 LOG_DEBUG("watchpoint address is unaligned");
1442 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1445 /* Caller doesn't seem to be able to describe watching for data
1446 * values of zero; that flags "no value".
1448 * REVISIT This DWT may well be able to watch for specific data
1449 * values. Requires comparator #1 to set DATAVMATCH and match
1450 * the data, and another comparator (DATAVADDR0) matching addr.
1452 if (watchpoint
->value
) {
1453 LOG_DEBUG("data value watchpoint not YET supported");
1454 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1457 cortex_m
->dwt_comp_available
--;
1458 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1463 int cortex_m_remove_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1465 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1467 /* REVISIT why check? DWT can be updated with core running ... */
1468 if (target
->state
!= TARGET_HALTED
) {
1469 LOG_WARNING("target not halted");
1470 return ERROR_TARGET_NOT_HALTED
;
1473 if (watchpoint
->set
)
1474 cortex_m_unset_watchpoint(target
, watchpoint
);
1476 cortex_m
->dwt_comp_available
++;
1477 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1482 void cortex_m_enable_watchpoints(struct target
*target
)
1484 struct watchpoint
*watchpoint
= target
->watchpoints
;
1486 /* set any pending watchpoints */
1487 while (watchpoint
) {
1488 if (!watchpoint
->set
)
1489 cortex_m_set_watchpoint(target
, watchpoint
);
1490 watchpoint
= watchpoint
->next
;
1494 static int cortex_m_load_core_reg_u32(struct target
*target
,
1495 uint32_t num
, uint32_t *value
)
1499 /* NOTE: we "know" here that the register identifiers used
1500 * in the v7m header match the Cortex-M3 Debug Core Register
1501 * Selector values for R0..R15, xPSR, MSP, and PSP.
1505 /* read a normal core register */
1506 retval
= cortexm_dap_read_coreregister_u32(target
, value
, num
);
1508 if (retval
!= ERROR_OK
) {
1509 LOG_ERROR("JTAG failure %i", retval
);
1510 return ERROR_JTAG_DEVICE_ERROR
;
1512 LOG_DEBUG("load from core reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1516 /* Floating-point Status and Registers */
1517 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21);
1518 if (retval
!= ERROR_OK
)
1520 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1521 if (retval
!= ERROR_OK
)
1523 LOG_DEBUG("load from FPSCR value 0x%" PRIx32
, *value
);
1526 case ARMV7M_S0
... ARMV7M_S31
:
1527 /* Floating-point Status and Registers */
1528 retval
= target_write_u32(target
, DCB_DCRSR
, num
- ARMV7M_S0
+ 0x40);
1529 if (retval
!= ERROR_OK
)
1531 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1532 if (retval
!= ERROR_OK
)
1534 LOG_DEBUG("load from FPU reg S%d value 0x%" PRIx32
,
1535 (int)(num
- ARMV7M_S0
), *value
);
1538 case ARMV7M_PRIMASK
:
1539 case ARMV7M_BASEPRI
:
1540 case ARMV7M_FAULTMASK
:
1541 case ARMV7M_CONTROL
:
1542 /* Cortex-M3 packages these four registers as bitfields
1543 * in one Debug Core register. So say r0 and r2 docs;
1544 * it was removed from r1 docs, but still works.
1546 cortexm_dap_read_coreregister_u32(target
, value
, 20);
1549 case ARMV7M_PRIMASK
:
1550 *value
= buf_get_u32((uint8_t *)value
, 0, 1);
1553 case ARMV7M_BASEPRI
:
1554 *value
= buf_get_u32((uint8_t *)value
, 8, 8);
1557 case ARMV7M_FAULTMASK
:
1558 *value
= buf_get_u32((uint8_t *)value
, 16, 1);
1561 case ARMV7M_CONTROL
:
1562 *value
= buf_get_u32((uint8_t *)value
, 24, 2);
1566 LOG_DEBUG("load from special reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1570 return ERROR_COMMAND_SYNTAX_ERROR
;
1576 static int cortex_m_store_core_reg_u32(struct target
*target
,
1577 uint32_t num
, uint32_t value
)
1581 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1583 /* NOTE: we "know" here that the register identifiers used
1584 * in the v7m header match the Cortex-M3 Debug Core Register
1585 * Selector values for R0..R15, xPSR, MSP, and PSP.
1589 retval
= cortexm_dap_write_coreregister_u32(target
, value
, num
);
1590 if (retval
!= ERROR_OK
) {
1593 LOG_ERROR("JTAG failure");
1594 r
= armv7m
->arm
.core_cache
->reg_list
+ num
;
1595 r
->dirty
= r
->valid
;
1596 return ERROR_JTAG_DEVICE_ERROR
;
1598 LOG_DEBUG("write core reg %i value 0x%" PRIx32
"", (int)num
, value
);
1602 /* Floating-point Status and Registers */
1603 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1604 if (retval
!= ERROR_OK
)
1606 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21 | (1<<16));
1607 if (retval
!= ERROR_OK
)
1609 LOG_DEBUG("write FPSCR value 0x%" PRIx32
, value
);
1612 case ARMV7M_S0
... ARMV7M_S31
:
1613 /* Floating-point Status and Registers */
1614 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1615 if (retval
!= ERROR_OK
)
1617 retval
= target_write_u32(target
, DCB_DCRSR
, (num
- ARMV7M_S0
+ 0x40) | (1<<16));
1618 if (retval
!= ERROR_OK
)
1620 LOG_DEBUG("write FPU reg S%d value 0x%" PRIx32
,
1621 (int)(num
- ARMV7M_S0
), value
);
1624 case ARMV7M_PRIMASK
:
1625 case ARMV7M_BASEPRI
:
1626 case ARMV7M_FAULTMASK
:
1627 case ARMV7M_CONTROL
:
1628 /* Cortex-M3 packages these four registers as bitfields
1629 * in one Debug Core register. So say r0 and r2 docs;
1630 * it was removed from r1 docs, but still works.
1632 cortexm_dap_read_coreregister_u32(target
, ®
, 20);
1635 case ARMV7M_PRIMASK
:
1636 buf_set_u32((uint8_t *)®
, 0, 1, value
);
1639 case ARMV7M_BASEPRI
:
1640 buf_set_u32((uint8_t *)®
, 8, 8, value
);
1643 case ARMV7M_FAULTMASK
:
1644 buf_set_u32((uint8_t *)®
, 16, 1, value
);
1647 case ARMV7M_CONTROL
:
1648 buf_set_u32((uint8_t *)®
, 24, 2, value
);
1652 cortexm_dap_write_coreregister_u32(target
, reg
, 20);
1654 LOG_DEBUG("write special reg %i value 0x%" PRIx32
" ", (int)num
, value
);
1658 return ERROR_COMMAND_SYNTAX_ERROR
;
1664 static int cortex_m_read_memory(struct target
*target
, target_addr_t address
,
1665 uint32_t size
, uint32_t count
, uint8_t *buffer
)
1667 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1669 if (armv7m
->arm
.is_armv6m
) {
1670 /* armv6m does not handle unaligned memory access */
1671 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1672 return ERROR_TARGET_UNALIGNED_ACCESS
;
1675 return mem_ap_read_buf(armv7m
->debug_ap
, buffer
, size
, count
, address
);
1678 static int cortex_m_write_memory(struct target
*target
, target_addr_t address
,
1679 uint32_t size
, uint32_t count
, const uint8_t *buffer
)
1681 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1683 if (armv7m
->arm
.is_armv6m
) {
1684 /* armv6m does not handle unaligned memory access */
1685 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1686 return ERROR_TARGET_UNALIGNED_ACCESS
;
1689 return mem_ap_write_buf(armv7m
->debug_ap
, buffer
, size
, count
, address
);
1692 static int cortex_m_init_target(struct command_context
*cmd_ctx
,
1693 struct target
*target
)
1695 armv7m_build_reg_cache(target
);
1696 arm_semihosting_init(target
);
1700 void cortex_m_deinit_target(struct target
*target
)
1702 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1704 free(cortex_m
->fp_comparator_list
);
1706 cortex_m_dwt_free(target
);
1707 armv7m_free_reg_cache(target
);
1709 free(target
->private_config
);
1713 int cortex_m_profiling(struct target
*target
, uint32_t *samples
,
1714 uint32_t max_num_samples
, uint32_t *num_samples
, uint32_t seconds
)
1716 struct timeval timeout
, now
;
1717 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1719 bool use_pcsr
= false;
1720 int retval
= ERROR_OK
;
1723 gettimeofday(&timeout
, NULL
);
1724 timeval_add_time(&timeout
, seconds
, 0);
1726 retval
= target_read_u32(target
, DWT_PCSR
, ®_value
);
1727 if (retval
!= ERROR_OK
) {
1728 LOG_ERROR("Error while reading PCSR");
1732 if (reg_value
!= 0) {
1734 LOG_INFO("Starting Cortex-M profiling. Sampling DWT_PCSR as fast as we can...");
1736 LOG_INFO("Starting profiling. Halting and resuming the"
1737 " target as often as we can...");
1738 reg
= register_get_by_name(target
->reg_cache
, "pc", 1);
1741 /* Make sure the target is running */
1742 target_poll(target
);
1743 if (target
->state
== TARGET_HALTED
)
1744 retval
= target_resume(target
, 1, 0, 0, 0);
1746 if (retval
!= ERROR_OK
) {
1747 LOG_ERROR("Error while resuming target");
1751 uint32_t sample_count
= 0;
1755 if (armv7m
&& armv7m
->debug_ap
) {
1756 uint32_t read_count
= max_num_samples
- sample_count
;
1757 if (read_count
> 1024)
1760 retval
= mem_ap_read_buf_noincr(armv7m
->debug_ap
,
1761 (void *)&samples
[sample_count
],
1762 4, read_count
, DWT_PCSR
);
1763 sample_count
+= read_count
;
1765 target_read_u32(target
, DWT_PCSR
, &samples
[sample_count
++]);
1768 target_poll(target
);
1769 if (target
->state
== TARGET_HALTED
) {
1770 reg_value
= buf_get_u32(reg
->value
, 0, 32);
1771 /* current pc, addr = 0, do not handle breakpoints, not debugging */
1772 retval
= target_resume(target
, 1, 0, 0, 0);
1773 samples
[sample_count
++] = reg_value
;
1774 target_poll(target
);
1775 alive_sleep(10); /* sleep 10ms, i.e. <100 samples/second. */
1776 } else if (target
->state
== TARGET_RUNNING
) {
1777 /* We want to quickly sample the PC. */
1778 retval
= target_halt(target
);
1780 LOG_INFO("Target not halted or running");
1786 if (retval
!= ERROR_OK
) {
1787 LOG_ERROR("Error while reading %s", use_pcsr
? "PCSR" : "target pc");
1792 gettimeofday(&now
, NULL
);
1793 if (sample_count
>= max_num_samples
|| timeval_compare(&now
, &timeout
) > 0) {
1794 LOG_INFO("Profiling completed. %" PRIu32
" samples.", sample_count
);
1799 *num_samples
= sample_count
;
1804 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1805 * on r/w if the core is not running, and clear on resume or reset ... or
1806 * at least, in a post_restore_context() method.
1809 struct dwt_reg_state
{
1810 struct target
*target
;
1812 uint8_t value
[4]; /* scratch/cache */
1815 static int cortex_m_dwt_get_reg(struct reg
*reg
)
1817 struct dwt_reg_state
*state
= reg
->arch_info
;
1820 int retval
= target_read_u32(state
->target
, state
->addr
, &tmp
);
1821 if (retval
!= ERROR_OK
)
1824 buf_set_u32(state
->value
, 0, 32, tmp
);
1828 static int cortex_m_dwt_set_reg(struct reg
*reg
, uint8_t *buf
)
1830 struct dwt_reg_state
*state
= reg
->arch_info
;
1832 return target_write_u32(state
->target
, state
->addr
,
1833 buf_get_u32(buf
, 0, reg
->size
));
1842 static const struct dwt_reg dwt_base_regs
[] = {
1843 { DWT_CTRL
, "dwt_ctrl", 32, },
1844 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1845 * increments while the core is asleep.
1847 { DWT_CYCCNT
, "dwt_cyccnt", 32, },
1848 /* plus some 8 bit counters, useful for profiling with TPIU */
1851 static const struct dwt_reg dwt_comp
[] = {
1852 #define DWT_COMPARATOR(i) \
1853 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1854 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1855 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1872 #undef DWT_COMPARATOR
1875 static const struct reg_arch_type dwt_reg_type
= {
1876 .get
= cortex_m_dwt_get_reg
,
1877 .set
= cortex_m_dwt_set_reg
,
1880 static void cortex_m_dwt_addreg(struct target
*t
, struct reg
*r
, const struct dwt_reg
*d
)
1882 struct dwt_reg_state
*state
;
1884 state
= calloc(1, sizeof *state
);
1887 state
->addr
= d
->addr
;
1892 r
->value
= state
->value
;
1893 r
->arch_info
= state
;
1894 r
->type
= &dwt_reg_type
;
1897 void cortex_m_dwt_setup(struct cortex_m_common
*cm
, struct target
*target
)
1900 struct reg_cache
*cache
;
1901 struct cortex_m_dwt_comparator
*comparator
;
1904 target_read_u32(target
, DWT_CTRL
, &dwtcr
);
1905 LOG_DEBUG("DWT_CTRL: 0x%" PRIx32
, dwtcr
);
1907 LOG_DEBUG("no DWT");
1911 cm
->dwt_num_comp
= (dwtcr
>> 28) & 0xF;
1912 cm
->dwt_comp_available
= cm
->dwt_num_comp
;
1913 cm
->dwt_comparator_list
= calloc(cm
->dwt_num_comp
,
1914 sizeof(struct cortex_m_dwt_comparator
));
1915 if (!cm
->dwt_comparator_list
) {
1917 cm
->dwt_num_comp
= 0;
1918 LOG_ERROR("out of mem");
1922 cache
= calloc(1, sizeof *cache
);
1925 free(cm
->dwt_comparator_list
);
1928 cache
->name
= "Cortex-M DWT registers";
1929 cache
->num_regs
= 2 + cm
->dwt_num_comp
* 3;
1930 cache
->reg_list
= calloc(cache
->num_regs
, sizeof *cache
->reg_list
);
1931 if (!cache
->reg_list
) {
1936 for (reg
= 0; reg
< 2; reg
++)
1937 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1938 dwt_base_regs
+ reg
);
1940 comparator
= cm
->dwt_comparator_list
;
1941 for (i
= 0; i
< cm
->dwt_num_comp
; i
++, comparator
++) {
1944 comparator
->dwt_comparator_address
= DWT_COMP0
+ 0x10 * i
;
1945 for (j
= 0; j
< 3; j
++, reg
++)
1946 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1947 dwt_comp
+ 3 * i
+ j
);
1949 /* make sure we clear any watchpoints enabled on the target */
1950 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8, 0);
1953 *register_get_last_cache_p(&target
->reg_cache
) = cache
;
1954 cm
->dwt_cache
= cache
;
1956 LOG_DEBUG("DWT dwtcr 0x%" PRIx32
", comp %d, watch%s",
1957 dwtcr
, cm
->dwt_num_comp
,
1958 (dwtcr
& (0xf << 24)) ? " only" : "/trigger");
1960 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1961 * implement single-address data value watchpoints ... so we
1962 * won't need to check it later, when asked to set one up.
1966 static void cortex_m_dwt_free(struct target
*target
)
1968 struct cortex_m_common
*cm
= target_to_cm(target
);
1969 struct reg_cache
*cache
= cm
->dwt_cache
;
1971 free(cm
->dwt_comparator_list
);
1972 cm
->dwt_comparator_list
= NULL
;
1973 cm
->dwt_num_comp
= 0;
1976 register_unlink_cache(&target
->reg_cache
, cache
);
1978 if (cache
->reg_list
) {
1979 for (size_t i
= 0; i
< cache
->num_regs
; i
++)
1980 free(cache
->reg_list
[i
].arch_info
);
1981 free(cache
->reg_list
);
1985 cm
->dwt_cache
= NULL
;
1988 #define MVFR0 0xe000ef40
1989 #define MVFR1 0xe000ef44
1991 #define MVFR0_DEFAULT_M4 0x10110021
1992 #define MVFR1_DEFAULT_M4 0x11000011
1994 #define MVFR0_DEFAULT_M7_SP 0x10110021
1995 #define MVFR0_DEFAULT_M7_DP 0x10110221
1996 #define MVFR1_DEFAULT_M7_SP 0x11000011
1997 #define MVFR1_DEFAULT_M7_DP 0x12000011
1999 int cortex_m_examine(struct target
*target
)
2002 uint32_t cpuid
, fpcr
, mvfr0
, mvfr1
;
2004 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2005 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
2006 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
2008 /* stlink shares the examine handler but does not support
2010 if (!armv7m
->stlink
) {
2011 if (cortex_m
->apsel
== DP_APSEL_INVALID
) {
2012 /* Search for the MEM-AP */
2013 retval
= dap_find_ap(swjdp
, AP_TYPE_AHB_AP
, &armv7m
->debug_ap
);
2014 if (retval
!= ERROR_OK
) {
2015 LOG_ERROR("Could not find MEM-AP to control the core");
2019 armv7m
->debug_ap
= dap_ap(swjdp
, cortex_m
->apsel
);
2022 /* Leave (only) generic DAP stuff for debugport_init(); */
2023 armv7m
->debug_ap
->memaccess_tck
= 8;
2025 retval
= mem_ap_init(armv7m
->debug_ap
);
2026 if (retval
!= ERROR_OK
)
2030 if (!target_was_examined(target
)) {
2031 target_set_examined(target
);
2033 /* Read from Device Identification Registers */
2034 retval
= target_read_u32(target
, CPUID
, &cpuid
);
2035 if (retval
!= ERROR_OK
)
2039 i
= (cpuid
>> 4) & 0xf;
2041 LOG_DEBUG("Cortex-M%d r%" PRId8
"p%" PRId8
" processor detected",
2042 i
, (uint8_t)((cpuid
>> 20) & 0xf), (uint8_t)((cpuid
>> 0) & 0xf));
2045 rev
= (cpuid
>> 20) & 0xf;
2046 patch
= (cpuid
>> 0) & 0xf;
2047 if ((rev
== 0) && (patch
< 2))
2048 LOG_WARNING("Silicon bug: single stepping will enter pending exception handler!");
2050 LOG_DEBUG("cpuid: 0x%8.8" PRIx32
"", cpuid
);
2052 /* VECTRESET is not supported on Cortex-M0, M0+ and M1 */
2053 cortex_m
->vectreset_supported
= i
> 1;
2056 target_read_u32(target
, MVFR0
, &mvfr0
);
2057 target_read_u32(target
, MVFR1
, &mvfr1
);
2059 /* test for floating point feature on Cortex-M4 */
2060 if ((mvfr0
== MVFR0_DEFAULT_M4
) && (mvfr1
== MVFR1_DEFAULT_M4
)) {
2061 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i
);
2062 armv7m
->fp_feature
= FPv4_SP
;
2064 } else if (i
== 7) {
2065 target_read_u32(target
, MVFR0
, &mvfr0
);
2066 target_read_u32(target
, MVFR1
, &mvfr1
);
2068 /* test for floating point features on Cortex-M7 */
2069 if ((mvfr0
== MVFR0_DEFAULT_M7_SP
) && (mvfr1
== MVFR1_DEFAULT_M7_SP
)) {
2070 LOG_DEBUG("Cortex-M%d floating point feature FPv5_SP found", i
);
2071 armv7m
->fp_feature
= FPv5_SP
;
2072 } else if ((mvfr0
== MVFR0_DEFAULT_M7_DP
) && (mvfr1
== MVFR1_DEFAULT_M7_DP
)) {
2073 LOG_DEBUG("Cortex-M%d floating point feature FPv5_DP found", i
);
2074 armv7m
->fp_feature
= FPv5_DP
;
2076 } else if (i
== 0) {
2077 /* Cortex-M0 does not support unaligned memory access */
2078 armv7m
->arm
.is_armv6m
= true;
2081 if (armv7m
->fp_feature
== FP_NONE
&&
2082 armv7m
->arm
.core_cache
->num_regs
> ARMV7M_NUM_CORE_REGS_NOFP
) {
2083 /* free unavailable FPU registers */
2086 for (idx
= ARMV7M_NUM_CORE_REGS_NOFP
;
2087 idx
< armv7m
->arm
.core_cache
->num_regs
;
2089 free(armv7m
->arm
.core_cache
->reg_list
[idx
].value
);
2090 free(armv7m
->arm
.core_cache
->reg_list
[idx
].feature
);
2091 free(armv7m
->arm
.core_cache
->reg_list
[idx
].reg_data_type
);
2093 armv7m
->arm
.core_cache
->num_regs
= ARMV7M_NUM_CORE_REGS_NOFP
;
2096 if (!armv7m
->stlink
) {
2097 if (i
== 3 || i
== 4)
2098 /* Cortex-M3/M4 have 4096 bytes autoincrement range,
2099 * s. ARM IHI 0031C: MEM-AP 7.2.2 */
2100 armv7m
->debug_ap
->tar_autoincr_block
= (1 << 12);
2102 /* Cortex-M7 has only 1024 bytes autoincrement range */
2103 armv7m
->debug_ap
->tar_autoincr_block
= (1 << 10);
2106 /* Configure trace modules */
2107 retval
= target_write_u32(target
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
2108 if (retval
!= ERROR_OK
)
2111 if (armv7m
->trace_config
.config_type
!= TRACE_CONFIG_TYPE_DISABLED
) {
2112 armv7m_trace_tpiu_config(target
);
2113 armv7m_trace_itm_config(target
);
2116 /* NOTE: FPB and DWT are both optional. */
2119 target_read_u32(target
, FP_CTRL
, &fpcr
);
2120 /* bits [14:12] and [7:4] */
2121 cortex_m
->fp_num_code
= ((fpcr
>> 8) & 0x70) | ((fpcr
>> 4) & 0xF);
2122 cortex_m
->fp_num_lit
= (fpcr
>> 8) & 0xF;
2123 cortex_m
->fp_code_available
= cortex_m
->fp_num_code
;
2124 /* Detect flash patch revision, see RM DDI 0403E.b page C1-817.
2125 Revision is zero base, fp_rev == 1 means Rev.2 ! */
2126 cortex_m
->fp_rev
= (fpcr
>> 28) & 0xf;
2127 free(cortex_m
->fp_comparator_list
);
2128 cortex_m
->fp_comparator_list
= calloc(
2129 cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
,
2130 sizeof(struct cortex_m_fp_comparator
));
2131 cortex_m
->fpb_enabled
= fpcr
& 1;
2132 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
2133 cortex_m
->fp_comparator_list
[i
].type
=
2134 (i
< cortex_m
->fp_num_code
) ? FPCR_CODE
: FPCR_LITERAL
;
2135 cortex_m
->fp_comparator_list
[i
].fpcr_address
= FP_COMP0
+ 4 * i
;
2137 /* make sure we clear any breakpoints enabled on the target */
2138 target_write_u32(target
, cortex_m
->fp_comparator_list
[i
].fpcr_address
, 0);
2140 LOG_DEBUG("FPB fpcr 0x%" PRIx32
", numcode %i, numlit %i",
2142 cortex_m
->fp_num_code
,
2143 cortex_m
->fp_num_lit
);
2146 cortex_m_dwt_free(target
);
2147 cortex_m_dwt_setup(cortex_m
, target
);
2149 /* These hardware breakpoints only work for code in flash! */
2150 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
2151 target_name(target
),
2152 cortex_m
->fp_num_code
,
2153 cortex_m
->dwt_num_comp
);
2159 static int cortex_m_dcc_read(struct target
*target
, uint8_t *value
, uint8_t *ctrl
)
2161 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
2166 retval
= mem_ap_read_buf_noincr(armv7m
->debug_ap
, buf
, 2, 1, DCB_DCRDR
);
2167 if (retval
!= ERROR_OK
)
2170 dcrdr
= target_buffer_get_u16(target
, buf
);
2171 *ctrl
= (uint8_t)dcrdr
;
2172 *value
= (uint8_t)(dcrdr
>> 8);
2174 LOG_DEBUG("data 0x%x ctrl 0x%x", *value
, *ctrl
);
2176 /* write ack back to software dcc register
2177 * signify we have read data */
2178 if (dcrdr
& (1 << 0)) {
2179 target_buffer_set_u16(target
, buf
, 0);
2180 retval
= mem_ap_write_buf_noincr(armv7m
->debug_ap
, buf
, 2, 1, DCB_DCRDR
);
2181 if (retval
!= ERROR_OK
)
2188 static int cortex_m_target_request_data(struct target
*target
,
2189 uint32_t size
, uint8_t *buffer
)
2195 for (i
= 0; i
< (size
* 4); i
++) {
2196 int retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2197 if (retval
!= ERROR_OK
)
2205 static int cortex_m_handle_target_request(void *priv
)
2207 struct target
*target
= priv
;
2208 if (!target_was_examined(target
))
2211 if (!target
->dbg_msg_enabled
)
2214 if (target
->state
== TARGET_RUNNING
) {
2219 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2220 if (retval
!= ERROR_OK
)
2223 /* check if we have data */
2224 if (ctrl
& (1 << 0)) {
2227 /* we assume target is quick enough */
2229 for (int i
= 1; i
<= 3; i
++) {
2230 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2231 if (retval
!= ERROR_OK
)
2233 request
|= ((uint32_t)data
<< (i
* 8));
2235 target_request(target
, request
);
2242 static int cortex_m_init_arch_info(struct target
*target
,
2243 struct cortex_m_common
*cortex_m
, struct adiv5_dap
*dap
)
2245 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2247 armv7m_init_arch_info(target
, armv7m
);
2249 /* default reset mode is to use srst if fitted
2250 * if not it will use CORTEX_M3_RESET_VECTRESET */
2251 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2253 armv7m
->arm
.dap
= dap
;
2255 /* register arch-specific functions */
2256 armv7m
->examine_debug_reason
= cortex_m_examine_debug_reason
;
2258 armv7m
->post_debug_entry
= NULL
;
2260 armv7m
->pre_restore_context
= NULL
;
2262 armv7m
->load_core_reg_u32
= cortex_m_load_core_reg_u32
;
2263 armv7m
->store_core_reg_u32
= cortex_m_store_core_reg_u32
;
2265 target_register_timer_callback(cortex_m_handle_target_request
, 1, 1, target
);
2270 static int cortex_m_target_create(struct target
*target
, Jim_Interp
*interp
)
2272 struct cortex_m_common
*cortex_m
= calloc(1, sizeof(struct cortex_m_common
));
2273 cortex_m
->common_magic
= CORTEX_M_COMMON_MAGIC
;
2274 struct adiv5_private_config
*pc
;
2276 pc
= (struct adiv5_private_config
*)target
->private_config
;
2277 if (adiv5_verify_config(pc
) != ERROR_OK
)
2280 cortex_m
->apsel
= pc
->ap_num
;
2282 cortex_m_init_arch_info(target
, cortex_m
, pc
->dap
);
2287 /*--------------------------------------------------------------------------*/
2289 static int cortex_m_verify_pointer(struct command_context
*cmd_ctx
,
2290 struct cortex_m_common
*cm
)
2292 if (cm
->common_magic
!= CORTEX_M_COMMON_MAGIC
) {
2293 command_print(cmd_ctx
, "target is not a Cortex-M");
2294 return ERROR_TARGET_INVALID
;
2300 * Only stuff below this line should need to verify that its target
2301 * is a Cortex-M3. Everything else should have indirected through the
2302 * cortexm3_target structure, which is only used with CM3 targets.
2305 COMMAND_HANDLER(handle_cortex_m_vector_catch_command
)
2307 struct target
*target
= get_current_target(CMD_CTX
);
2308 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2309 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2313 static const struct {
2317 { "hard_err", VC_HARDERR
, },
2318 { "int_err", VC_INTERR
, },
2319 { "bus_err", VC_BUSERR
, },
2320 { "state_err", VC_STATERR
, },
2321 { "chk_err", VC_CHKERR
, },
2322 { "nocp_err", VC_NOCPERR
, },
2323 { "mm_err", VC_MMERR
, },
2324 { "reset", VC_CORERESET
, },
2327 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2328 if (retval
!= ERROR_OK
)
2331 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &demcr
);
2332 if (retval
!= ERROR_OK
)
2338 if (CMD_ARGC
== 1) {
2339 if (strcmp(CMD_ARGV
[0], "all") == 0) {
2340 catch = VC_HARDERR
| VC_INTERR
| VC_BUSERR
2341 | VC_STATERR
| VC_CHKERR
| VC_NOCPERR
2342 | VC_MMERR
| VC_CORERESET
;
2344 } else if (strcmp(CMD_ARGV
[0], "none") == 0)
2347 while (CMD_ARGC
-- > 0) {
2349 for (i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2350 if (strcmp(CMD_ARGV
[CMD_ARGC
], vec_ids
[i
].name
) != 0)
2352 catch |= vec_ids
[i
].mask
;
2355 if (i
== ARRAY_SIZE(vec_ids
)) {
2356 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV
[CMD_ARGC
]);
2357 return ERROR_COMMAND_SYNTAX_ERROR
;
2361 /* For now, armv7m->demcr only stores vector catch flags. */
2362 armv7m
->demcr
= catch;
2367 /* write, but don't assume it stuck (why not??) */
2368 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
, demcr
);
2369 if (retval
!= ERROR_OK
)
2371 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &demcr
);
2372 if (retval
!= ERROR_OK
)
2375 /* FIXME be sure to clear DEMCR on clean server shutdown.
2376 * Otherwise the vector catch hardware could fire when there's
2377 * no debugger hooked up, causing much confusion...
2381 for (unsigned i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2382 command_print(CMD_CTX
, "%9s: %s", vec_ids
[i
].name
,
2383 (demcr
& vec_ids
[i
].mask
) ? "catch" : "ignore");
2389 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command
)
2391 struct target
*target
= get_current_target(CMD_CTX
);
2392 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2395 static const Jim_Nvp nvp_maskisr_modes
[] = {
2396 { .name
= "auto", .value
= CORTEX_M_ISRMASK_AUTO
},
2397 { .name
= "off", .value
= CORTEX_M_ISRMASK_OFF
},
2398 { .name
= "on", .value
= CORTEX_M_ISRMASK_ON
},
2399 { .name
= NULL
, .value
= -1 },
2404 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2405 if (retval
!= ERROR_OK
)
2408 if (target
->state
!= TARGET_HALTED
) {
2409 command_print(CMD_CTX
, "target must be stopped for \"%s\" command", CMD_NAME
);
2414 n
= Jim_Nvp_name2value_simple(nvp_maskisr_modes
, CMD_ARGV
[0]);
2415 if (n
->name
== NULL
)
2416 return ERROR_COMMAND_SYNTAX_ERROR
;
2417 cortex_m
->isrmasking_mode
= n
->value
;
2420 if (cortex_m
->isrmasking_mode
== CORTEX_M_ISRMASK_ON
)
2421 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
2423 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
2426 n
= Jim_Nvp_value2name_simple(nvp_maskisr_modes
, cortex_m
->isrmasking_mode
);
2427 command_print(CMD_CTX
, "cortex_m interrupt mask %s", n
->name
);
2432 COMMAND_HANDLER(handle_cortex_m_reset_config_command
)
2434 struct target
*target
= get_current_target(CMD_CTX
);
2435 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2439 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2440 if (retval
!= ERROR_OK
)
2444 if (strcmp(*CMD_ARGV
, "sysresetreq") == 0)
2445 cortex_m
->soft_reset_config
= CORTEX_M_RESET_SYSRESETREQ
;
2447 else if (strcmp(*CMD_ARGV
, "vectreset") == 0) {
2448 if (target_was_examined(target
)
2449 && !cortex_m
->vectreset_supported
)
2450 LOG_WARNING("VECTRESET is not supported on your Cortex-M core!");
2452 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2455 return ERROR_COMMAND_SYNTAX_ERROR
;
2458 switch (cortex_m
->soft_reset_config
) {
2459 case CORTEX_M_RESET_SYSRESETREQ
:
2460 reset_config
= "sysresetreq";
2463 case CORTEX_M_RESET_VECTRESET
:
2464 reset_config
= "vectreset";
2468 reset_config
= "unknown";
2472 command_print(CMD_CTX
, "cortex_m reset_config %s", reset_config
);
2477 static const struct command_registration cortex_m_exec_command_handlers
[] = {
2480 .handler
= handle_cortex_m_mask_interrupts_command
,
2481 .mode
= COMMAND_EXEC
,
2482 .help
= "mask cortex_m interrupts",
2483 .usage
= "['auto'|'on'|'off']",
2486 .name
= "vector_catch",
2487 .handler
= handle_cortex_m_vector_catch_command
,
2488 .mode
= COMMAND_EXEC
,
2489 .help
= "configure hardware vectors to trigger debug entry",
2490 .usage
= "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2493 .name
= "reset_config",
2494 .handler
= handle_cortex_m_reset_config_command
,
2495 .mode
= COMMAND_ANY
,
2496 .help
= "configure software reset handling",
2497 .usage
= "['sysresetreq'|'vectreset']",
2499 COMMAND_REGISTRATION_DONE
2501 static const struct command_registration cortex_m_command_handlers
[] = {
2503 .chain
= armv7m_command_handlers
,
2506 .chain
= armv7m_trace_command_handlers
,
2510 .mode
= COMMAND_EXEC
,
2511 .help
= "Cortex-M command group",
2513 .chain
= cortex_m_exec_command_handlers
,
2515 COMMAND_REGISTRATION_DONE
2518 struct target_type cortexm_target
= {
2520 .deprecated_name
= "cortex_m3",
2522 .poll
= cortex_m_poll
,
2523 .arch_state
= armv7m_arch_state
,
2525 .target_request_data
= cortex_m_target_request_data
,
2527 .halt
= cortex_m_halt
,
2528 .resume
= cortex_m_resume
,
2529 .step
= cortex_m_step
,
2531 .assert_reset
= cortex_m_assert_reset
,
2532 .deassert_reset
= cortex_m_deassert_reset
,
2533 .soft_reset_halt
= cortex_m_soft_reset_halt
,
2535 .get_gdb_arch
= arm_get_gdb_arch
,
2536 .get_gdb_reg_list
= armv7m_get_gdb_reg_list
,
2538 .read_memory
= cortex_m_read_memory
,
2539 .write_memory
= cortex_m_write_memory
,
2540 .checksum_memory
= armv7m_checksum_memory
,
2541 .blank_check_memory
= armv7m_blank_check_memory
,
2543 .run_algorithm
= armv7m_run_algorithm
,
2544 .start_algorithm
= armv7m_start_algorithm
,
2545 .wait_algorithm
= armv7m_wait_algorithm
,
2547 .add_breakpoint
= cortex_m_add_breakpoint
,
2548 .remove_breakpoint
= cortex_m_remove_breakpoint
,
2549 .add_watchpoint
= cortex_m_add_watchpoint
,
2550 .remove_watchpoint
= cortex_m_remove_watchpoint
,
2552 .commands
= cortex_m_command_handlers
,
2553 .target_create
= cortex_m_target_create
,
2554 .target_jim_configure
= adiv5_jim_configure
,
2555 .init_target
= cortex_m_init_target
,
2556 .examine
= cortex_m_examine
,
2557 .deinit_target
= cortex_m_deinit_target
,
2559 .profiling
= cortex_m_profiling
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)