1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2009 by Øyvind Harboe *
9 * oyvind.harboe@zylin.com *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
33 typedef enum armv4_5_mode
35 ARMV4_5_MODE_USR
= 16,
36 ARMV4_5_MODE_FIQ
= 17,
37 ARMV4_5_MODE_IRQ
= 18,
38 ARMV4_5_MODE_SVC
= 19,
39 ARMV4_5_MODE_ABT
= 23,
41 ARMV4_5_MODE_UND
= 27,
42 ARMV4_5_MODE_SYS
= 31,
46 const char *arm_mode_name(unsigned psr_mode
);
47 bool is_arm_mode(unsigned psr_mode
);
49 int armv4_5_mode_to_number(enum armv4_5_mode mode
);
50 enum armv4_5_mode
armv4_5_number_to_mode(int number
);
52 typedef enum armv4_5_state
56 ARMV4_5_STATE_JAZELLE
,
60 extern char* armv4_5_state_strings
[];
62 extern const int armv4_5_core_reg_map
[8][17];
64 #define ARMV4_5_CORE_REG_MODE(cache, mode, num) \
65 cache->reg_list[armv4_5_core_reg_map[armv4_5_mode_to_number(mode)][num]]
67 /* offset into armv4_5 core register cache -- OBSOLETE, DO NOT USE! */
68 enum { ARMV4_5_CPSR
= 31, };
70 #define ARMV4_5_COMMON_MAGIC 0x0A450A45
73 * Represents a generic ARM core, with standard application registers.
75 * There are sixteen application registers (including PC, SP, LR) and a PSR.
76 * Cortex-M series cores do not support as many core states or shadowed
77 * registers as traditional ARM cores, and only support Thumb2 instructions.
82 struct reg_cache
*core_cache
;
84 /** Handle to the CPSR; valid in all core modes. */
87 /** Handle to the SPSR; valid only in core modes with an SPSR. */
93 * Indicates what registers are in the ARM state core register set.
94 * ARMV4_5_MODE_ANY indicates the standard set of 37 registers,
95 * seen on for example ARM7TDMI cores. ARM_MODE_MON indicates three
96 * more registers are shadowed, for "Secure Monitor" mode.
98 enum armv4_5_mode core_type
;
100 enum armv4_5_mode core_mode
;
101 enum armv4_5_state core_state
;
103 /** Flag reporting unavailability of the BKPT instruction. */
106 /** Backpointer to the target. */
107 struct target
*target
;
109 /** Handle for the debug module, if one is present. */
112 /** Handle for the Embedded Trace Module, if one is present. */
113 struct etm_context
*etm
;
115 int (*full_context
)(struct target
*target
);
116 int (*read_core_reg
)(struct target
*target
, struct reg
*reg
,
117 int num
, enum armv4_5_mode mode
);
118 int (*write_core_reg
)(struct target
*target
, struct reg
*reg
,
119 int num
, enum armv4_5_mode mode
, uint32_t value
);
123 #define target_to_armv4_5 target_to_arm
125 /** Convert target handle to generic ARM target state handle. */
126 static inline struct arm
*target_to_arm(struct target
*target
)
128 return target
->arch_info
;
131 static inline bool is_arm(struct arm
*arm
)
133 return arm
&& arm
->common_magic
== ARMV4_5_COMMON_MAGIC
;
136 struct armv4_5_algorithm
140 enum armv4_5_mode core_mode
;
141 enum armv4_5_state core_state
;
147 enum armv4_5_mode mode
;
148 struct target
*target
;
149 struct arm
*armv4_5_common
;
153 struct reg_cache
* armv4_5_build_reg_cache(struct target
*target
,
154 struct arm
*armv4_5_common
);
156 int armv4_5_arch_state(struct target
*target
);
157 int armv4_5_get_gdb_reg_list(struct target
*target
,
158 struct reg
**reg_list
[], int *reg_list_size
);
160 extern const struct command_registration arm_command_handlers
[];
162 int armv4_5_init_arch_info(struct target
*target
, struct arm
*armv4_5
);
164 int armv4_5_run_algorithm(struct target
*target
,
165 int num_mem_params
, struct mem_param
*mem_params
,
166 int num_reg_params
, struct reg_param
*reg_params
,
167 uint32_t entry_point
, uint32_t exit_point
,
168 int timeout_ms
, void *arch_info
);
170 int arm_checksum_memory(struct target
*target
,
171 uint32_t address
, uint32_t count
, uint32_t *checksum
);
172 int arm_blank_check_memory(struct target
*target
,
173 uint32_t address
, uint32_t count
, uint32_t *blank
);
175 void arm_set_cpsr(struct arm
*arm
, uint32_t cpsr
);
176 struct reg
*arm_reg_current(struct arm
*arm
, unsigned regnum
);
178 extern struct reg arm_gdb_dummy_fp_reg
;
179 extern struct reg arm_gdb_dummy_fps_reg
;
181 /* ARM mode instructions
184 /* Store multiple increment after
186 * List: for each bit in list: store register
187 * S: in priviledged mode: store user-mode registers
188 * W = 1: update the base register. W = 0: leave the base register untouched
190 #define ARMV4_5_STMIA(Rn, List, S, W) (0xe8800000 | ((S) << 22) | ((W) << 21) | ((Rn) << 16) | (List))
192 /* Load multiple increment after
194 * List: for each bit in list: store register
195 * S: in priviledged mode: store user-mode registers
196 * W = 1: update the base register. W = 0: leave the base register untouched
198 #define ARMV4_5_LDMIA(Rn, List, S, W) (0xe8900000 | ((S) << 22) | ((W) << 21) | ((Rn) << 16) | (List))
201 #define ARMV4_5_NOP (0xe1a08008)
203 /* Move PSR to general purpose register
204 * R = 1: SPSR R = 0: CPSR
205 * Rn: target register
207 #define ARMV4_5_MRS(Rn, R) (0xe10f0000 | ((R) << 22) | ((Rn) << 12))
210 * Rd: register to store
213 #define ARMV4_5_STR(Rd, Rn) (0xe5800000 | ((Rd) << 12) | ((Rn) << 16))
216 * Rd: register to load
219 #define ARMV4_5_LDR(Rd, Rn) (0xe5900000 | ((Rd) << 12) | ((Rn) << 16))
221 /* Move general purpose register to PSR
222 * R = 1: SPSR R = 0: CPSR
224 * 1: control field 2: extension field 4: status field 8: flags field
225 * Rm: source register
227 #define ARMV4_5_MSR_GP(Rm, Field, R) (0xe120f000 | (Rm) | ((Field) << 16) | ((R) << 22))
228 #define ARMV4_5_MSR_IM(Im, Rotate, Field, R) (0xe320f000 | (Im) | ((Rotate) << 8) | ((Field) << 16) | ((R) << 22))
230 /* Load Register Halfword Immediate Post-Index
231 * Rd: register to load
234 #define ARMV4_5_LDRH_IP(Rd, Rn) (0xe0d000b2 | ((Rd) << 12) | ((Rn) << 16))
236 /* Load Register Byte Immediate Post-Index
237 * Rd: register to load
240 #define ARMV4_5_LDRB_IP(Rd, Rn) (0xe4d00001 | ((Rd) << 12) | ((Rn) << 16))
242 /* Store register Halfword Immediate Post-Index
243 * Rd: register to store
246 #define ARMV4_5_STRH_IP(Rd, Rn) (0xe0c000b2 | ((Rd) << 12) | ((Rn) << 16))
248 /* Store register Byte Immediate Post-Index
249 * Rd: register to store
252 #define ARMV4_5_STRB_IP(Rd, Rn) (0xe4c00001 | ((Rd) << 12) | ((Rn) << 16))
255 * Im: Branch target (left-shifted by 2 bits, added to PC)
256 * L: 1: branch and link 0: branch only
258 #define ARMV4_5_B(Im, L) (0xea000000 | (Im) | ((L) << 24))
260 /* Branch and exchange (ARM state)
261 * Rm: register holding branch target address
263 #define ARMV4_5_BX(Rm) (0xe12fff10 | (Rm))
265 /* Move to ARM register from coprocessor
266 * CP: Coprocessor number
267 * op1: Coprocessor opcode
268 * Rd: destination register
269 * CRn: first coprocessor operand
270 * CRm: second coprocessor operand
271 * op2: Second coprocessor opcode
273 #define ARMV4_5_MRC(CP, op1, Rd, CRn, CRm, op2) (0xee100010 | (CRm) | ((op2) << 5) | ((CP) << 8) | ((Rd) << 12) | ((CRn) << 16) | ((op1) << 21))
275 /* Move to coprocessor from ARM register
276 * CP: Coprocessor number
277 * op1: Coprocessor opcode
278 * Rd: destination register
279 * CRn: first coprocessor operand
280 * CRm: second coprocessor operand
281 * op2: Second coprocessor opcode
283 #define ARMV4_5_MCR(CP, op1, Rd, CRn, CRm, op2) (0xee000010 | (CRm) | ((op2) << 5) | ((CP) << 8) | ((Rd) << 12) | ((CRn) << 16) | ((op1) << 21))
285 /* Breakpoint instruction (ARMv5)
286 * Im: 16-bit immediate
288 #define ARMV5_BKPT(Im) (0xe1200070 | ((Im & 0xfff0) << 8) | (Im & 0xf))
291 /* Thumb mode instructions
294 /* Store register (Thumb mode)
295 * Rd: source register
298 #define ARMV4_5_T_STR(Rd, Rn) ((0x6000 | (Rd) | ((Rn) << 3)) | ((0x6000 | (Rd) | ((Rn) << 3)) << 16))
300 /* Load register (Thumb state)
301 * Rd: destination register
304 #define ARMV4_5_T_LDR(Rd, Rn) ((0x6800 | ((Rn) << 3) | (Rd)) | ((0x6800 | ((Rn) << 3) | (Rd)) << 16))
306 /* Load multiple (Thumb state)
308 * List: for each bit in list: store register
310 #define ARMV4_5_T_LDMIA(Rn, List) ((0xc800 | ((Rn) << 8) | (List)) | ((0xc800 | ((Rn) << 8) | List) << 16))
312 /* Load register with PC relative addressing
313 * Rd: register to load
315 #define ARMV4_5_T_LDR_PCREL(Rd) ((0x4800 | ((Rd) << 8)) | ((0x4800 | ((Rd) << 8)) << 16))
317 /* Move hi register (Thumb mode)
318 * Rd: destination register
319 * Rm: source register
321 #define ARMV4_5_T_MOV(Rd, Rm) ((0x4600 | ((Rd) & 0x7) | (((Rd) & 0x8) << 4) | (((Rm) & 0x7) << 3) | (((Rm) & 0x8) << 3)) | ((0x4600 | ((Rd) & 0x7) | (((Rd) & 0x8) << 4) | (((Rm) & 0x7) << 3) | (((Rm) & 0x8) << 3)) << 16))
323 /* No operation (Thumb mode)
325 #define ARMV4_5_T_NOP (0x46c0 | (0x46c0 << 16))
327 /* Move immediate to register (Thumb state)
328 * Rd: destination register
329 * Im: 8-bit immediate value
331 #define ARMV4_5_T_MOV_IM(Rd, Im) ((0x2000 | ((Rd) << 8) | (Im)) | ((0x2000 | ((Rd) << 8) | (Im)) << 16))
333 /* Branch and Exchange
334 * Rm: register containing branch target
336 #define ARMV4_5_T_BX(Rm) ((0x4700 | ((Rm) << 3)) | ((0x4700 | ((Rm) << 3)) << 16))
338 /* Branch (Thumb state)
341 #define ARMV4_5_T_B(Imm) ((0xe000 | (Imm)) | ((0xe000 | (Imm)) << 16))
343 /* Breakpoint instruction (ARMv5) (Thumb state)
344 * Im: 8-bit immediate
346 #define ARMV5_T_BKPT(Im) ((0xbe00 | Im) | ((0xbe00 | Im) << 16))
348 /* build basic mrc/mcr opcode */
350 static inline uint32_t mrc_opcode(int cpnum
, uint32_t op1
, uint32_t op2
, uint32_t CRn
, uint32_t CRm
)
360 #endif /* ARMV4_5_H */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)