1 /***************************************************************************
2 * Copyright (C) 2008 digenius technology GmbH. *
4 * Copyright (C) 2008 Georg Acher <acher@in.tum.de> *
6 * This program is free software; you can redistribute it and/or modify *
7 * it under the terms of the GNU General Public License as published by *
8 * the Free Software Foundation; either version 2 of the License, or *
9 * (at your option) any later version. *
11 * This program is distributed in the hope that it will be useful, *
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
14 * GNU General Public License for more details. *
16 * You should have received a copy of the GNU General Public License *
17 * along with this program; if not, write to the *
18 * Free Software Foundation, Inc., *
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
20 ***************************************************************************/
27 #include "embeddedice.h"
31 #define asizeof(x) (sizeof(x) / sizeof((x)[0]))
33 #define NEW(type, variable, items) \
34 type * variable = calloc(1, sizeof(type) * items)
36 /* For MinGW use 'I' prefix to print size_t (instead of 'z') */
44 #define ARM11_REGCACHE_MODEREGS 0
45 #define ARM11_REGCACHE_FREGS 0
47 #define ARM11_REGCACHE_COUNT (20 + \
48 23 * ARM11_REGCACHE_MODEREGS + \
49 9 * ARM11_REGCACHE_FREGS)
51 #define ARM11_TAP_DEFAULT TAP_INVALID
54 #define CHECK_RETVAL(action) \
56 int __retval = (action); \
58 if (__retval != ERROR_OK) \
64 typedef struct arm11_register_history_s
68 }arm11_register_history_t
;
70 enum arm11_debug_version
72 ARM11_DEBUG_V6
= 0x01,
73 ARM11_DEBUG_V61
= 0x02,
74 ARM11_DEBUG_V7
= 0x03,
75 ARM11_DEBUG_V7_CP14
= 0x04,
78 typedef struct arm11_common_s
80 target_t
* target
; /**< Reference back to the owner */
82 arm_jtag_t jtag_info
; /**< Handler to access assigned JTAG device */
84 /** \name Processor type detection */
87 u32 device_id
; /**< IDCODE readout */
88 u32 didr
; /**< DIDR readout (debug capabilities) */
89 u8 implementor
; /**< DIDR Implementor readout */
91 size_t brp
; /**< Number of Breakpoint Register Pairs from DIDR */
92 size_t wrp
; /**< Number of Watchpoint Register Pairs from DIDR */
94 enum arm11_debug_version
95 debug_version
; /**< ARM debug architecture from DIDR */
98 u32 last_dscr
; /**< Last retrieved DSCR value;
99 Use only for debug message generation */
102 bool halt_requested
; /**< Keep track if arm11_halt() calls occured
103 during reset. Otherwise do it ASAP. */
105 bool simulate_reset_on_next_halt
; /**< Perform cleanups of the ARM state on next halt */
107 /** \name Shadow registers to save processor state */
110 reg_t
* reg_list
; /**< target register list */
111 u32 reg_values
[ARM11_REGCACHE_COUNT
]; /**< data for registers */
115 arm11_register_history_t
116 reg_history
[ARM11_REGCACHE_COUNT
]; /**< register state before last resume */
118 size_t free_brps
; /**< keep track of breakpoints allocated by arm11_add_breakpoint() */
119 size_t free_wrps
; /**< keep track of breakpoints allocated by arm11_add_watchpoint() */
122 reg_cache_t
*core_cache
;
127 * ARM11 DBGTAP instructions
129 * http://infocenter.arm.com/help/topic/com.arm.doc.ddi0301f/I1006229.html
131 enum arm11_instructions
135 ARM11_RESTART
= 0x04,
145 ARM11_DSCR_CORE_HALTED
= 1 << 0,
146 ARM11_DSCR_CORE_RESTARTED
= 1 << 1,
148 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_MASK
= 0x0F << 2,
149 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_HALT
= 0x00 << 2,
150 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BREAKPOINT
= 0x01 << 2,
151 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_WATCHPOINT
= 0x02 << 2,
152 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BKPT_INSTRUCTION
= 0x03 << 2,
153 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_EDBGRQ
= 0x04 << 2,
154 ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_VECTOR_CATCH
= 0x05 << 2,
156 ARM11_DSCR_STICKY_PRECISE_DATA_ABORT
= 1 << 6,
157 ARM11_DSCR_STICKY_IMPRECISE_DATA_ABORT
= 1 << 7,
158 ARM11_DSCR_INTERRUPTS_DISABLE
= 1 << 11,
159 ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE
= 1 << 13,
160 ARM11_DSCR_MODE_SELECT
= 1 << 14,
161 ARM11_DSCR_WDTR_FULL
= 1 << 29,
162 ARM11_DSCR_RDTR_FULL
= 1 << 30,
167 ARM11_CPSR_T
= 1 << 5,
168 ARM11_CPSR_J
= 1 << 24,
179 ARM11_SC7_WCR0
= 112,
182 typedef struct arm11_reg_state_s
188 /* poll current target status */
189 int arm11_poll(struct target_s
*target
);
190 /* architecture specific status reply */
191 int arm11_arch_state(struct target_s
*target
);
193 /* target request support */
194 int arm11_target_request_data(struct target_s
*target
, u32 size
, u8
*buffer
);
196 /* target execution control */
197 int arm11_halt(struct target_s
*target
);
198 int arm11_resume(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
, int debug_execution
);
199 int arm11_step(struct target_s
*target
, int current
, u32 address
, int handle_breakpoints
);
200 int arm11_examine(struct target_s
*target
);
202 /* target reset control */
203 int arm11_assert_reset(struct target_s
*target
);
204 int arm11_deassert_reset(struct target_s
*target
);
205 int arm11_soft_reset_halt(struct target_s
*target
);
207 /* target register access for gdb */
208 int arm11_get_gdb_reg_list(struct target_s
*target
, struct reg_s
**reg_list
[], int *reg_list_size
);
210 /* target memory access
211 * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
212 * count: number of items of <size>
214 int arm11_read_memory(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
215 int arm11_write_memory(struct target_s
*target
, u32 address
, u32 size
, u32 count
, u8
*buffer
);
217 /* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
218 int arm11_bulk_write_memory(struct target_s
*target
, u32 address
, u32 count
, u8
*buffer
);
220 int arm11_checksum_memory(struct target_s
*target
, u32 address
, u32 count
, u32
* checksum
);
222 /* target break-/watchpoint control
223 * rw: 0 = write, 1 = read, 2 = access
225 int arm11_add_breakpoint(struct target_s
*target
, breakpoint_t
*breakpoint
);
226 int arm11_remove_breakpoint(struct target_s
*target
, breakpoint_t
*breakpoint
);
227 int arm11_add_watchpoint(struct target_s
*target
, watchpoint_t
*watchpoint
);
228 int arm11_remove_watchpoint(struct target_s
*target
, watchpoint_t
*watchpoint
);
230 /* target algorithm support */
231 int arm11_run_algorithm(struct target_s
*target
, int num_mem_params
, mem_param_t
*mem_params
, int num_reg_params
, reg_param_t
*reg_param
, u32 entry_point
, u32 exit_point
, int timeout_ms
, void *arch_info
);
233 int arm11_register_commands(struct command_context_s
*cmd_ctx
);
234 int arm11_target_create(struct target_s
*target
, Jim_Interp
*interp
);
235 int arm11_init_target(struct command_context_s
*cmd_ctx
, struct target_s
*target
);
236 int arm11_quit(void);
239 int arm11_build_reg_cache(target_t
*target
);
240 int arm11_set_reg(reg_t
*reg
, u8
*buf
);
241 int arm11_get_reg(reg_t
*reg
);
243 void arm11_record_register_history(arm11_common_t
* arm11
);
244 void arm11_dump_reg_changes(arm11_common_t
* arm11
);
248 void arm11_setup_field (arm11_common_t
* arm11
, int num_bits
, void * in_data
, void * out_data
, scan_field_t
* field
);
249 void arm11_add_IR (arm11_common_t
* arm11
, u8 instr
, tap_state_t state
);
250 void arm11_add_debug_SCAN_N (arm11_common_t
* arm11
, u8 chain
, tap_state_t state
);
251 void arm11_add_debug_INST (arm11_common_t
* arm11
, u32 inst
, u8
* flag
, tap_state_t state
);
252 int arm11_read_DSCR (arm11_common_t
* arm11
, u32
*dscr
);
253 int arm11_write_DSCR (arm11_common_t
* arm11
, u32 dscr
);
255 enum target_debug_reason
arm11_get_DSCR_debug_reason(u32 dscr
);
257 void arm11_run_instr_data_prepare (arm11_common_t
* arm11
);
258 void arm11_run_instr_data_finish (arm11_common_t
* arm11
);
259 int arm11_run_instr_no_data (arm11_common_t
* arm11
, u32
* opcode
, size_t count
);
260 void arm11_run_instr_no_data1 (arm11_common_t
* arm11
, u32 opcode
);
261 int arm11_run_instr_data_to_core (arm11_common_t
* arm11
, u32 opcode
, u32
* data
, size_t count
);
262 int arm11_run_instr_data_to_core_noack (arm11_common_t
* arm11
, u32 opcode
, u32
* data
, size_t count
);
263 int arm11_run_instr_data_to_core1 (arm11_common_t
* arm11
, u32 opcode
, u32 data
);
264 int arm11_run_instr_data_from_core (arm11_common_t
* arm11
, u32 opcode
, u32
* data
, size_t count
);
265 void arm11_run_instr_data_from_core_via_r0 (arm11_common_t
* arm11
, u32 opcode
, u32
* data
);
266 void arm11_run_instr_data_to_core_via_r0 (arm11_common_t
* arm11
, u32 opcode
, u32 data
);
268 int arm11_add_dr_scan_vc(int num_fields
, scan_field_t
*fields
, tap_state_t state
);
269 int arm11_add_ir_scan_vc(int num_fields
, scan_field_t
*fields
, tap_state_t state
);
271 /** Used to make a list of read/write commands for scan chain 7
273 * Use with arm11_sc7_run()
275 typedef struct arm11_sc7_action_s
277 bool write
; /**< Access mode: true for write, false for read. */
278 u8 address
; /**< Register address mode. Use enum #arm11_sc7 */
279 u32 value
; /**< If write then set this to value to be written.
280 In read mode this receives the read value when the
282 } arm11_sc7_action_t
;
284 int arm11_sc7_run(arm11_common_t
* arm11
, arm11_sc7_action_t
* actions
, size_t count
);
286 /* Mid-level helper functions */
287 void arm11_sc7_clear_vbw(arm11_common_t
* arm11
);
288 void arm11_sc7_set_vcr(arm11_common_t
* arm11
, u32 value
);
290 int arm11_read_memory_word(arm11_common_t
* arm11
, u32 address
, u32
* result
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)