gdbserver: gdb cmds returning failure on success
[openocd.git] / src / server / gdb_server.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2007-2010 √ėyvind Harboe *
6 * oyvind.harboe@zylin.com *
7 * *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
10 * *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
15 * *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
20 * *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
26 #ifdef HAVE_CONFIG_H
27 #include "config.h"
28 #endif
29
30 #include <target/breakpoints.h>
31 #include <target/target_request.h>
32 #include <target/register.h>
33 #include "server.h"
34 #include <flash/nor/core.h>
35 #include "gdb_server.h"
36 #include <target/image.h>
37 #include <jtag/jtag.h>
38
39
40 /**
41 * @file
42 * GDB server implementation.
43 *
44 * This implements the GDB Remote Serial Protocol, over TCP connections,
45 * giving GDB access to the JTAG or other hardware debugging facilities
46 * found in most modern embedded processors.
47 */
48
49 /* private connection data for GDB */
50 struct gdb_connection
51 {
52 char buffer[GDB_BUFFER_SIZE];
53 char *buf_p;
54 int buf_cnt;
55 int ctrl_c;
56 enum target_state frontend_state;
57 struct image *vflash_image;
58 int closed;
59 int busy;
60 int noack_mode;
61 bool sync; /* set flag to true if you want the next stepi to return immediately.
62 allowing GDB to pick up a fresh set of register values from the target
63 without modifying the target state. */
64 /* We delay reporting memory write errors until next step/continue or memory
65 * write. This improves performance of gdb load significantly as the GDB packet
66 * can be replied immediately and a new GDB packet will be ready without delay
67 * (ca. 10% or so...).
68 */
69 bool mem_write_error;
70 };
71
72
73 #if 0
74 #define _DEBUG_GDB_IO_
75 #endif
76
77 static struct gdb_connection *current_gdb_connection;
78
79 static int gdb_breakpoint_override;
80 static enum breakpoint_type gdb_breakpoint_override_type;
81
82 static int gdb_error(struct connection *connection, int retval);
83 static unsigned short gdb_port = 3333;
84 static unsigned short gdb_port_next = 0;
85 static const char DIGITS[16] = "0123456789abcdef";
86
87 static void gdb_log_callback(void *priv, const char *file, unsigned line,
88 const char *function, const char *string);
89
90 /* number of gdb connections, mainly to suppress gdb related debugging spam
91 * in helper/log.c when no gdb connections are actually active */
92 int gdb_actual_connections;
93
94 /* set if we are sending a memory map to gdb
95 * via qXfer:memory-map:read packet */
96 /* enabled by default*/
97 static int gdb_use_memory_map = 1;
98 /* enabled by default*/
99 static int gdb_flash_program = 1;
100
101 /* if set, data aborts cause an error to be reported in memory read packets
102 * see the code in gdb_read_memory_packet() for further explanations.
103 * Disabled by default.
104 */
105 static int gdb_report_data_abort;
106
107 static int gdb_last_signal(struct target *target)
108 {
109 switch (target->debug_reason)
110 {
111 case DBG_REASON_DBGRQ:
112 return 0x2; /* SIGINT */
113 case DBG_REASON_BREAKPOINT:
114 case DBG_REASON_WATCHPOINT:
115 case DBG_REASON_WPTANDBKPT:
116 return 0x05; /* SIGTRAP */
117 case DBG_REASON_SINGLESTEP:
118 return 0x05; /* SIGTRAP */
119 case DBG_REASON_NOTHALTED:
120 return 0x0; /* no signal... shouldn't happen */
121 default:
122 LOG_USER("undefined debug reason %d - target needs reset", target->debug_reason);
123 return 0x0;
124 }
125 }
126
127 static int check_pending(struct connection *connection,
128 int timeout_s, int *got_data)
129 {
130 /* a non-blocking socket will block if there is 0 bytes available on the socket,
131 * but return with as many bytes as are available immediately
132 */
133 struct timeval tv;
134 fd_set read_fds;
135 struct gdb_connection *gdb_con = connection->priv;
136 int t;
137 if (got_data == NULL)
138 got_data=&t;
139 *got_data = 0;
140
141 if (gdb_con->buf_cnt > 0)
142 {
143 *got_data = 1;
144 return ERROR_OK;
145 }
146
147 FD_ZERO(&read_fds);
148 FD_SET(connection->fd, &read_fds);
149
150 tv.tv_sec = timeout_s;
151 tv.tv_usec = 0;
152 if (socket_select(connection->fd + 1, &read_fds, NULL, NULL, &tv) == 0)
153 {
154 /* This can typically be because a "monitor" command took too long
155 * before printing any progress messages
156 */
157 if (timeout_s > 0)
158 {
159 return ERROR_GDB_TIMEOUT;
160 } else
161 {
162 return ERROR_OK;
163 }
164 }
165 *got_data = FD_ISSET(connection->fd, &read_fds) != 0;
166 return ERROR_OK;
167 }
168
169 static int gdb_get_char_inner(struct connection *connection, int* next_char)
170 {
171 struct gdb_connection *gdb_con = connection->priv;
172 int retval = ERROR_OK;
173
174 #ifdef _DEBUG_GDB_IO_
175 char *debug_buffer;
176 #endif
177 for (;;)
178 {
179 if (connection->service->type == CONNECTION_PIPE)
180 {
181 gdb_con->buf_cnt = read(connection->fd, gdb_con->buffer, GDB_BUFFER_SIZE);
182 }
183 else
184 {
185 retval = check_pending(connection, 1, NULL);
186 if (retval != ERROR_OK)
187 return retval;
188 gdb_con->buf_cnt = read_socket(connection->fd, gdb_con->buffer, GDB_BUFFER_SIZE);
189 }
190
191 if (gdb_con->buf_cnt > 0)
192 {
193 break;
194 }
195 if (gdb_con->buf_cnt == 0)
196 {
197 gdb_con->closed = 1;
198 return ERROR_SERVER_REMOTE_CLOSED;
199 }
200
201 #ifdef _WIN32
202 errno = WSAGetLastError();
203
204 switch (errno)
205 {
206 case WSAEWOULDBLOCK:
207 usleep(1000);
208 break;
209 case WSAECONNABORTED:
210 gdb_con->closed = 1;
211 return ERROR_SERVER_REMOTE_CLOSED;
212 case WSAECONNRESET:
213 gdb_con->closed = 1;
214 return ERROR_SERVER_REMOTE_CLOSED;
215 default:
216 LOG_ERROR("read: %d", errno);
217 exit(-1);
218 }
219 #else
220 switch (errno)
221 {
222 case EAGAIN:
223 usleep(1000);
224 break;
225 case ECONNABORTED:
226 gdb_con->closed = 1;
227 return ERROR_SERVER_REMOTE_CLOSED;
228 case ECONNRESET:
229 gdb_con->closed = 1;
230 return ERROR_SERVER_REMOTE_CLOSED;
231 default:
232 LOG_ERROR("read: %s", strerror(errno));
233 gdb_con->closed = 1;
234 return ERROR_SERVER_REMOTE_CLOSED;
235 }
236 #endif
237 }
238
239 #ifdef _DEBUG_GDB_IO_
240 debug_buffer = malloc(gdb_con->buf_cnt + 1);
241 memcpy(debug_buffer, gdb_con->buffer, gdb_con->buf_cnt);
242 debug_buffer[gdb_con->buf_cnt] = 0;
243 LOG_DEBUG("received '%s'", debug_buffer);
244 free(debug_buffer);
245 #endif
246
247 gdb_con->buf_p = gdb_con->buffer;
248 gdb_con->buf_cnt--;
249 *next_char = *(gdb_con->buf_p++);
250 if (gdb_con->buf_cnt > 0)
251 connection->input_pending = 1;
252 else
253 connection->input_pending = 0;
254 #ifdef _DEBUG_GDB_IO_
255 LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
256 #endif
257
258 return retval;
259 }
260
261 /**
262 * The cool thing about this fn is that it allows buf_p and buf_cnt to be
263 * held in registers in the inner loop.
264 *
265 * For small caches and embedded systems this is important!
266 */
267 static inline int gdb_get_char_fast(struct connection *connection, int* next_char, char **buf_p, int *buf_cnt)
268 {
269 int retval = ERROR_OK;
270
271 if ((*buf_cnt)-- > 0)
272 {
273 *next_char = **buf_p;
274 (*buf_p)++;
275 if (*buf_cnt > 0)
276 connection->input_pending = 1;
277 else
278 connection->input_pending = 0;
279
280 #ifdef _DEBUG_GDB_IO_
281 LOG_DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
282 #endif
283
284 return ERROR_OK;
285 }
286
287 struct gdb_connection *gdb_con = connection->priv;
288 gdb_con->buf_p = *buf_p;
289 gdb_con->buf_cnt = *buf_cnt;
290 retval = gdb_get_char_inner(connection, next_char);
291 *buf_p = gdb_con->buf_p;
292 *buf_cnt = gdb_con->buf_cnt;
293
294 return retval;
295 }
296
297
298 static int gdb_get_char(struct connection *connection, int* next_char)
299 {
300 struct gdb_connection *gdb_con = connection->priv;
301 return gdb_get_char_fast(connection, next_char, &gdb_con->buf_p, &gdb_con->buf_cnt);
302 }
303
304
305 static int gdb_putback_char(struct connection *connection, int last_char)
306 {
307 struct gdb_connection *gdb_con = connection->priv;
308
309 if (gdb_con->buf_p > gdb_con->buffer)
310 {
311 *(--gdb_con->buf_p) = last_char;
312 gdb_con->buf_cnt++;
313 }
314 else
315 {
316 LOG_ERROR("BUG: couldn't put character back");
317 }
318
319 return ERROR_OK;
320 }
321
322 /* The only way we can detect that the socket is closed is the first time
323 * we write to it, we will fail. Subsequent write operations will
324 * succeed. Shudder! */
325 static int gdb_write(struct connection *connection, void *data, int len)
326 {
327 struct gdb_connection *gdb_con = connection->priv;
328 if (gdb_con->closed)
329 return ERROR_SERVER_REMOTE_CLOSED;
330
331 if (connection->service->type == CONNECTION_PIPE)
332 {
333 /* write to stdout */
334 if (write(STDOUT_FILENO, data, len) == len)
335 {
336 return ERROR_OK;
337 }
338 }
339 else
340 {
341 if (write_socket(connection->fd, data, len) == len)
342 {
343 return ERROR_OK;
344 }
345 }
346 gdb_con->closed = 1;
347 return ERROR_SERVER_REMOTE_CLOSED;
348 }
349
350 static int gdb_put_packet_inner(struct connection *connection,
351 char *buffer, int len)
352 {
353 int i;
354 unsigned char my_checksum = 0;
355 #ifdef _DEBUG_GDB_IO_
356 char *debug_buffer;
357 #endif
358 int reply;
359 int retval;
360 struct gdb_connection *gdb_con = connection->priv;
361
362 for (i = 0; i < len; i++)
363 my_checksum += buffer[i];
364
365 #ifdef _DEBUG_GDB_IO_
366 /*
367 * At this point we should have nothing in the input queue from GDB,
368 * however sometimes '-' is sent even though we've already received
369 * an ACK (+) for everything we've sent off.
370 */
371 int gotdata;
372 for (;;)
373 {
374 retval = check_pending(connection, 0, &gotdata);
375 if (retval != ERROR_OK)
376 return retval;
377 if (!gotdata)
378 break;
379 if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
380 return retval;
381 if (reply == '$') {
382 /* fix a problem with some IAR tools */
383 gdb_putback_char(connection, reply);
384 LOG_DEBUG("Unexpected start of new packet");
385 break;
386 }
387
388 LOG_WARNING("Discard unexpected char %c", reply);
389 }
390 #endif
391
392 while (1)
393 {
394 #ifdef _DEBUG_GDB_IO_
395 debug_buffer = malloc(len + 1);
396 memcpy(debug_buffer, buffer, len);
397 debug_buffer[len] = 0;
398 LOG_DEBUG("sending packet '$%s#%2.2x'", debug_buffer, my_checksum);
399 free(debug_buffer);
400 #endif
401
402 char local_buffer[1024];
403 local_buffer[0] = '$';
404 if ((size_t)len + 4 <= sizeof(local_buffer))
405 {
406 /* performance gain on smaller packets by only a single call to gdb_write() */
407 memcpy(local_buffer + 1, buffer, len++);
408 local_buffer[len++] = '#';
409 local_buffer[len++] = DIGITS[(my_checksum >> 4) & 0xf];
410 local_buffer[len++] = DIGITS[my_checksum & 0xf];
411 if ((retval = gdb_write(connection, local_buffer, len)) != ERROR_OK)
412 {
413 return retval;
414 }
415 }
416 else
417 {
418 /* larger packets are transmitted directly from caller supplied buffer
419 by several calls to gdb_write() to avoid dynamic allocation */
420 local_buffer[1] = '#';
421 local_buffer[2] = DIGITS[(my_checksum >> 4) & 0xf];
422 local_buffer[3] = DIGITS[my_checksum & 0xf];
423 if ((retval = gdb_write(connection, local_buffer, 1)) != ERROR_OK)
424 {
425 return retval;
426 }
427 if ((retval = gdb_write(connection, buffer, len)) != ERROR_OK)
428 {
429 return retval;
430 }
431 if ((retval = gdb_write(connection, local_buffer + 1, 3)) != ERROR_OK)
432 {
433 return retval;
434 }
435 }
436
437 if (gdb_con->noack_mode)
438 break;
439
440 if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
441 return retval;
442
443 if (reply == '+')
444 break;
445 else if (reply == '-')
446 {
447 /* Stop sending output packets for now */
448 log_remove_callback(gdb_log_callback, connection);
449 LOG_WARNING("negative reply, retrying");
450 }
451 else if (reply == 0x3)
452 {
453 gdb_con->ctrl_c = 1;
454 if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
455 return retval;
456 if (reply == '+')
457 break;
458 else if (reply == '-')
459 {
460 /* Stop sending output packets for now */
461 log_remove_callback(gdb_log_callback, connection);
462 LOG_WARNING("negative reply, retrying");
463 }
464 else if (reply == '$') {
465 LOG_ERROR("GDB missing ack(1) - assumed good");
466 gdb_putback_char(connection, reply);
467 return ERROR_OK;
468 } else {
469
470 LOG_ERROR("unknown character(1) 0x%2.2x in reply, dropping connection", reply);
471 gdb_con->closed = 1;
472 return ERROR_SERVER_REMOTE_CLOSED;
473 }
474 }
475 else if (reply == '$') {
476 LOG_ERROR("GDB missing ack(2) - assumed good");
477 gdb_putback_char(connection, reply);
478 return ERROR_OK;
479 }
480 else
481 {
482 LOG_ERROR("unknown character(2) 0x%2.2x in reply, dropping connection", reply);
483 gdb_con->closed = 1;
484 return ERROR_SERVER_REMOTE_CLOSED;
485 }
486 }
487 if (gdb_con->closed)
488 return ERROR_SERVER_REMOTE_CLOSED;
489
490 return ERROR_OK;
491 }
492
493 static int gdb_put_packet(struct connection *connection, char *buffer, int len)
494 {
495 struct gdb_connection *gdb_con = connection->priv;
496 gdb_con->busy = 1;
497 int retval = gdb_put_packet_inner(connection, buffer, len);
498 gdb_con->busy = 0;
499
500 /* we sent some data, reset timer for keep alive messages */
501 kept_alive();
502
503 return retval;
504 }
505
506 static __inline__ int fetch_packet(struct connection *connection, int *checksum_ok, int noack, int *len, char *buffer)
507 {
508 unsigned char my_checksum = 0;
509 char checksum[3];
510 int character;
511 int retval = ERROR_OK;
512
513 struct gdb_connection *gdb_con = connection->priv;
514 my_checksum = 0;
515 int count = 0;
516 count = 0;
517
518 /* move this over into local variables to use registers and give the
519 * more freedom to optimize */
520 char *buf_p = gdb_con->buf_p;
521 int buf_cnt = gdb_con->buf_cnt;
522
523 for (;;)
524 {
525 /* The common case is that we have an entire packet with no escape chars.
526 * We need to leave at least 2 bytes in the buffer to have
527 * gdb_get_char() update various bits and bobs correctly.
528 */
529 if ((buf_cnt > 2) && ((buf_cnt + count) < *len))
530 {
531 /* The compiler will struggle a bit with constant propagation and
532 * aliasing, so we help it by showing that these values do not
533 * change inside the loop
534 */
535 int i;
536 char *buf = buf_p;
537 int run = buf_cnt - 2;
538 i = 0;
539 int done = 0;
540 while (i < run)
541 {
542 character = *buf++;
543 i++;
544 if (character == '#')
545 {
546 /* Danger! character can be '#' when esc is
547 * used so we need an explicit boolean for done here.
548 */
549 done = 1;
550 break;
551 }
552
553 if (character == '}')
554 {
555 /* data transmitted in binary mode (X packet)
556 * uses 0x7d as escape character */
557 my_checksum += character & 0xff;
558 character = *buf++;
559 i++;
560 my_checksum += character & 0xff;
561 buffer[count++] = (character ^ 0x20) & 0xff;
562 }
563 else
564 {
565 my_checksum += character & 0xff;
566 buffer[count++] = character & 0xff;
567 }
568 }
569 buf_p += i;
570 buf_cnt -= i;
571 if (done)
572 break;
573 }
574 if (count > *len)
575 {
576 LOG_ERROR("packet buffer too small");
577 retval = ERROR_GDB_BUFFER_TOO_SMALL;
578 break;
579 }
580
581 retval = gdb_get_char_fast(connection, &character, &buf_p, &buf_cnt);
582 if (retval != ERROR_OK)
583 break;
584
585 if (character == '#')
586 break;
587
588 if (character == '}')
589 {
590 /* data transmitted in binary mode (X packet)
591 * uses 0x7d as escape character */
592 my_checksum += character & 0xff;
593
594 retval = gdb_get_char_fast(connection, &character, &buf_p, &buf_cnt);
595 if (retval != ERROR_OK)
596 break;
597
598 my_checksum += character & 0xff;
599 buffer[count++] = (character ^ 0x20) & 0xff;
600 }
601 else
602 {
603 my_checksum += character & 0xff;
604 buffer[count++] = character & 0xff;
605 }
606 }
607
608 gdb_con->buf_p = buf_p;
609 gdb_con->buf_cnt = buf_cnt;
610
611 if (retval != ERROR_OK)
612 return retval;
613
614 *len = count;
615
616 if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
617 return retval;
618 checksum[0] = character;
619 if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
620 return retval;
621 checksum[1] = character;
622 checksum[2] = 0;
623
624 if (!noack)
625 {
626 *checksum_ok = (my_checksum == strtoul(checksum, NULL, 16));
627 }
628
629 return ERROR_OK;
630 }
631
632 static int gdb_get_packet_inner(struct connection *connection,
633 char *buffer, int *len)
634 {
635 int character;
636 int retval;
637 struct gdb_connection *gdb_con = connection->priv;
638
639 while (1)
640 {
641 do
642 {
643 if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
644 return retval;
645
646 #ifdef _DEBUG_GDB_IO_
647 LOG_DEBUG("character: '%c'", character);
648 #endif
649
650 switch (character)
651 {
652 case '$':
653 break;
654 case '+':
655 /* gdb sends a dummy ack '+' at every remote connect - see remote_start_remote (remote.c)
656 * in case anyone tries to debug why they receive this warning every time */
657 LOG_WARNING("acknowledgment received, but no packet pending");
658 break;
659 case '-':
660 LOG_WARNING("negative acknowledgment, but no packet pending");
661 break;
662 case 0x3:
663 gdb_con->ctrl_c = 1;
664 *len = 0;
665 return ERROR_OK;
666 default:
667 LOG_WARNING("ignoring character 0x%x", character);
668 break;
669 }
670 } while (character != '$');
671
672
673
674 int checksum_ok = 0;
675 /* explicit code expansion here to get faster inlined code in -O3 by not
676 * calculating checksum
677 */
678 if (gdb_con->noack_mode)
679 {
680 if ((retval = fetch_packet(connection, &checksum_ok, 1, len, buffer)) != ERROR_OK)
681 return retval;
682 } else
683 {
684 if ((retval = fetch_packet(connection, &checksum_ok, 0, len, buffer)) != ERROR_OK)
685 return retval;
686 }
687
688 if (gdb_con->noack_mode)
689 {
690 /* checksum is not checked in noack mode */
691 break;
692 }
693 if (checksum_ok)
694 {
695 if ((retval = gdb_write(connection, "+", 1)) != ERROR_OK)
696 {
697 return retval;
698 }
699 break;
700 }
701 }
702 if (gdb_con->closed)
703 return ERROR_SERVER_REMOTE_CLOSED;
704
705 return ERROR_OK;
706 }
707
708 static int gdb_get_packet(struct connection *connection, char *buffer, int *len)
709 {
710 struct gdb_connection *gdb_con = connection->priv;
711 gdb_con->busy = 1;
712 int retval = gdb_get_packet_inner(connection, buffer, len);
713 gdb_con->busy = 0;
714 return retval;
715 }
716
717 static int gdb_output_con(struct connection *connection, const char* line)
718 {
719 char *hex_buffer;
720 int i, bin_size;
721
722 bin_size = strlen(line);
723
724 hex_buffer = malloc(bin_size*2 + 2);
725 if (hex_buffer == NULL)
726 return ERROR_GDB_BUFFER_TOO_SMALL;
727
728 hex_buffer[0] = 'O';
729 for (i = 0; i < bin_size; i++)
730 snprintf(hex_buffer + 1 + i*2, 3, "%2.2x", line[i]);
731 hex_buffer[bin_size*2 + 1] = 0;
732
733 int retval = gdb_put_packet(connection, hex_buffer, bin_size*2 + 1);
734
735 free(hex_buffer);
736 return retval;
737 }
738
739 static int gdb_output(struct command_context *context, const char* line)
740 {
741 /* this will be dumped to the log and also sent as an O packet if possible */
742 LOG_USER_N("%s", line);
743 return ERROR_OK;
744 }
745
746
747 static void gdb_frontend_halted(struct target *target, struct connection *connection)
748 {
749 struct gdb_connection *gdb_connection = connection->priv;
750
751 /* In the GDB protocol when we are stepping or continuing execution,
752 * we have a lingering reply. Upon receiving a halted event
753 * when we have that lingering packet, we reply to the original
754 * step or continue packet.
755 *
756 * Executing monitor commands can bring the target in and
757 * out of the running state so we'll see lots of TARGET_EVENT_XXX
758 * that are to be ignored.
759 */
760 if (gdb_connection->frontend_state == TARGET_RUNNING)
761 {
762 char sig_reply[4];
763 int signal;
764
765 /* stop forwarding log packets! */
766 log_remove_callback(gdb_log_callback, connection);
767
768 if (gdb_connection->ctrl_c)
769 {
770 signal = 0x2;
771 gdb_connection->ctrl_c = 0;
772 }
773 else
774 {
775 signal = gdb_last_signal(target);
776 }
777
778 snprintf(sig_reply, 4, "T%2.2x", signal);
779 gdb_put_packet(connection, sig_reply, 3);
780 gdb_connection->frontend_state = TARGET_HALTED;
781 }
782 }
783
784 static int gdb_target_callback_event_handler(struct target *target,
785 enum target_event event, void *priv)
786 {
787 int retval;
788 struct connection *connection = priv;
789
790 target_handle_event(target, event);
791 switch (event)
792 {
793 case TARGET_EVENT_GDB_HALT:
794 gdb_frontend_halted(target, connection);
795 break;
796 case TARGET_EVENT_HALTED:
797 target_call_event_callbacks(target, TARGET_EVENT_GDB_END);
798 break;
799 case TARGET_EVENT_GDB_FLASH_ERASE_START:
800 target_handle_event(target, TARGET_EVENT_OLD_gdb_program_config);
801 if ((retval = jtag_execute_queue()) != ERROR_OK)
802 {
803 return retval;
804 }
805 break;
806 default:
807 break;
808 }
809
810 return ERROR_OK;
811 }
812
813 static int gdb_new_connection(struct connection *connection)
814 {
815 struct gdb_connection *gdb_connection = malloc(sizeof(struct gdb_connection));
816 struct gdb_service *gdb_service = connection->service->priv;
817 int retval;
818 int initial_ack;
819
820 connection->priv = gdb_connection;
821
822 /* initialize gdb connection information */
823 gdb_connection->buf_p = gdb_connection->buffer;
824 gdb_connection->buf_cnt = 0;
825 gdb_connection->ctrl_c = 0;
826 gdb_connection->frontend_state = TARGET_HALTED;
827 gdb_connection->vflash_image = NULL;
828 gdb_connection->closed = 0;
829 gdb_connection->busy = 0;
830 gdb_connection->noack_mode = 0;
831 gdb_connection->sync = true;
832 gdb_connection->mem_write_error = false;
833
834 /* send ACK to GDB for debug request */
835 gdb_write(connection, "+", 1);
836
837 /* output goes through gdb connection */
838 command_set_output_handler(connection->cmd_ctx, gdb_output, connection);
839
840 /* we must remove all breakpoints registered to the target as a previous
841 * GDB session could leave dangling breakpoints if e.g. communication
842 * timed out.
843 */
844 breakpoint_clear_target(gdb_service->target);
845 watchpoint_clear_target(gdb_service->target);
846
847 /* register callback to be informed about target events */
848 target_register_event_callback(gdb_target_callback_event_handler, connection);
849
850 /* remove the initial ACK from the incoming buffer */
851 if ((retval = gdb_get_char(connection, &initial_ack)) != ERROR_OK)
852 return retval;
853
854 /* FIX!!!??? would we actually ever receive a + here???
855 * Not observed.
856 */
857 if (initial_ack != '+')
858 gdb_putback_char(connection, initial_ack);
859 target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_ATTACH);
860
861 if (gdb_use_memory_map)
862 {
863 /* Connect must fail if the memory map can't be set up correctly.
864 *
865 * This will cause an auto_probe to be invoked, which is either
866 * a no-op or it will fail when the target isn't ready(e.g. not halted).
867 */
868 int i;
869 for (i = 0; i < flash_get_bank_count(); i++)
870 {
871 struct flash_bank *p;
872 retval = get_flash_bank_by_num(i, &p);
873 if (retval != ERROR_OK)
874 {
875 LOG_ERROR("Connect failed. Consider setting up a gdb-attach event for the target to prepare target for GDB connect.");
876 return retval;
877 }
878 }
879 }
880
881 gdb_actual_connections++;
882 LOG_DEBUG("New GDB Connection: %d, Target %s, state: %s",
883 gdb_actual_connections,
884 target_name(gdb_service->target),
885 target_state_name(gdb_service->target));
886
887 return ERROR_OK;
888 }
889
890 static int gdb_connection_closed(struct connection *connection)
891 {
892 struct gdb_service *gdb_service = connection->service->priv;
893 struct gdb_connection *gdb_connection = connection->priv;
894
895 /* we're done forwarding messages. Tear down callback before
896 * cleaning up connection.
897 */
898 log_remove_callback(gdb_log_callback, connection);
899
900 gdb_actual_connections--;
901 LOG_DEBUG("GDB Close, Target: %s, state: %s, gdb_actual_connections=%d",
902 target_name(gdb_service->target),
903 target_state_name(gdb_service->target),
904 gdb_actual_connections);
905
906 /* see if an image built with vFlash commands is left */
907 if (gdb_connection->vflash_image)
908 {
909 image_close(gdb_connection->vflash_image);
910 free(gdb_connection->vflash_image);
911 gdb_connection->vflash_image = NULL;
912 }
913
914 /* if this connection registered a debug-message receiver delete it */
915 delete_debug_msg_receiver(connection->cmd_ctx, gdb_service->target);
916
917 if (connection->priv)
918 {
919 free(connection->priv);
920 connection->priv = NULL;
921 }
922 else
923 {
924 LOG_ERROR("BUG: connection->priv == NULL");
925 }
926
927
928 target_unregister_event_callback(gdb_target_callback_event_handler, connection);
929
930 target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_END);
931
932 target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_DETACH);
933
934 return ERROR_OK;
935 }
936
937 static void gdb_send_error(struct connection *connection, uint8_t the_error)
938 {
939 char err[4];
940 snprintf(err, 4, "E%2.2X", the_error);
941 gdb_put_packet(connection, err, 3);
942 }
943
944 static int gdb_last_signal_packet(struct connection *connection,
945 struct target *target, char* packet, int packet_size)
946 {
947 char sig_reply[4];
948 int signal;
949
950 signal = gdb_last_signal(target);
951
952 snprintf(sig_reply, 4, "S%2.2x", signal);
953 gdb_put_packet(connection, sig_reply, 3);
954
955 return ERROR_OK;
956 }
957
958 static int gdb_reg_pos(struct target *target, int pos, int len)
959 {
960 if (target->endianness == TARGET_LITTLE_ENDIAN)
961 return pos;
962 else
963 return len - 1 - pos;
964 }
965
966 /* Convert register to string of bytes. NB! The # of bits in the
967 * register might be non-divisible by 8(a byte), in which
968 * case an entire byte is shown.
969 *
970 * NB! the format on the wire is the target endianness
971 *
972 * The format of reg->value is little endian
973 *
974 */
975 static void gdb_str_to_target(struct target *target,
976 char *tstr, struct reg *reg)
977 {
978 int i;
979
980 uint8_t *buf;
981 int buf_len;
982 buf = reg->value;
983 buf_len = DIV_ROUND_UP(reg->size, 8);
984
985 for (i = 0; i < buf_len; i++)
986 {
987 int j = gdb_reg_pos(target, i, buf_len);
988 tstr[i*2] = DIGITS[(buf[j]>>4) & 0xf];
989 tstr[i*2 + 1] = DIGITS[buf[j]&0xf];
990 }
991 }
992
993 static int hextoint(int c)
994 {
995 if (c>='0'&&c<='9')
996 {
997 return c-'0';
998 }
999 c = toupper(c);
1000 if (c>='A'&&c<='F')
1001 {
1002 return c-'A'+10;
1003 }
1004 LOG_ERROR("BUG: invalid register value %08x", c);
1005 return 0;
1006 }
1007
1008 /* copy over in register buffer */
1009 static void gdb_target_to_reg(struct target *target,
1010 char *tstr, int str_len, uint8_t *bin)
1011 {
1012 if (str_len % 2)
1013 {
1014 LOG_ERROR("BUG: gdb value with uneven number of characters encountered");
1015 exit(-1);
1016 }
1017
1018 int i;
1019 for (i = 0; i < str_len; i += 2)
1020 {
1021 uint8_t t = hextoint(tstr[i]) << 4;
1022 t |= hextoint(tstr[i + 1]);
1023
1024 int j = gdb_reg_pos(target, i/2, str_len/2);
1025 bin[j] = t;
1026 }
1027 }
1028
1029 static int gdb_get_registers_packet(struct connection *connection,
1030 struct target *target, char* packet, int packet_size)
1031 {
1032 struct reg **reg_list;
1033 int reg_list_size;
1034 int retval;
1035 int reg_packet_size = 0;
1036 char *reg_packet;
1037 char *reg_packet_p;
1038 int i;
1039
1040 #ifdef _DEBUG_GDB_IO_
1041 LOG_DEBUG("-");
1042 #endif
1043
1044 if ((retval = target_get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
1045 {
1046 return gdb_error(connection, retval);
1047 }
1048
1049 for (i = 0; i < reg_list_size; i++)
1050 {
1051 reg_packet_size += reg_list[i]->size;
1052 }
1053
1054 reg_packet = malloc(DIV_ROUND_UP(reg_packet_size, 8) * 2);
1055 reg_packet_p = reg_packet;
1056
1057 for (i = 0; i < reg_list_size; i++)
1058 {
1059 gdb_str_to_target(target, reg_packet_p, reg_list[i]);
1060 reg_packet_p += DIV_ROUND_UP(reg_list[i]->size, 8) * 2;
1061 }
1062
1063 #ifdef _DEBUG_GDB_IO_
1064 {
1065 char *reg_packet_p;
1066 reg_packet_p = strndup(reg_packet, DIV_ROUND_UP(reg_packet_size, 8) * 2);
1067 LOG_DEBUG("reg_packet: %s", reg_packet_p);
1068 free(reg_packet_p);
1069 }
1070 #endif
1071
1072 gdb_put_packet(connection, reg_packet, DIV_ROUND_UP(reg_packet_size, 8) * 2);
1073 free(reg_packet);
1074
1075 free(reg_list);
1076
1077 return ERROR_OK;
1078 }
1079
1080 static int gdb_set_registers_packet(struct connection *connection,
1081 struct target *target, char *packet, int packet_size)
1082 {
1083 int i;
1084 struct reg **reg_list;
1085 int reg_list_size;
1086 int retval;
1087 char *packet_p;
1088
1089 #ifdef _DEBUG_GDB_IO_
1090 LOG_DEBUG("-");
1091 #endif
1092
1093 /* skip command character */
1094 packet++;
1095 packet_size--;
1096
1097 if (packet_size % 2)
1098 {
1099 LOG_WARNING("GDB set_registers packet with uneven characters received, dropping connection");
1100 return ERROR_SERVER_REMOTE_CLOSED;
1101 }
1102
1103 if ((retval = target_get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
1104 {
1105 return gdb_error(connection, retval);
1106 }
1107
1108 packet_p = packet;
1109 for (i = 0; i < reg_list_size; i++)
1110 {
1111 uint8_t *bin_buf;
1112 int chars = (DIV_ROUND_UP(reg_list[i]->size, 8) * 2);
1113
1114 if (packet_p + chars > packet + packet_size)
1115 {
1116 LOG_ERROR("BUG: register packet is too small for registers");
1117 }
1118
1119 bin_buf = malloc(DIV_ROUND_UP(reg_list[i]->size, 8));
1120 gdb_target_to_reg(target, packet_p, chars, bin_buf);
1121
1122 reg_list[i]->type->set(reg_list[i], bin_buf);
1123
1124 /* advance packet pointer */
1125 packet_p += chars;
1126
1127
1128 free(bin_buf);
1129 }
1130
1131 /* free struct reg *reg_list[] array allocated by get_gdb_reg_list */
1132 free(reg_list);
1133
1134 gdb_put_packet(connection, "OK", 2);
1135
1136 return ERROR_OK;
1137 }
1138
1139 static int gdb_get_register_packet(struct connection *connection,
1140 struct target *target, char *packet, int packet_size)
1141 {
1142 char *reg_packet;
1143 int reg_num = strtoul(packet + 1, NULL, 16);
1144 struct reg **reg_list;
1145 int reg_list_size;
1146 int retval;
1147
1148 #ifdef _DEBUG_GDB_IO_
1149 LOG_DEBUG("-");
1150 #endif
1151
1152 if ((retval = target_get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
1153 {
1154 return gdb_error(connection, retval);
1155 }
1156
1157 if (reg_list_size <= reg_num)
1158 {
1159 LOG_ERROR("gdb requested a non-existing register");
1160 exit(-1);
1161 }
1162
1163 reg_packet = malloc(DIV_ROUND_UP(reg_list[reg_num]->size, 8) * 2);
1164
1165 gdb_str_to_target(target, reg_packet, reg_list[reg_num]);
1166
1167 gdb_put_packet(connection, reg_packet, DIV_ROUND_UP(reg_list[reg_num]->size, 8) * 2);
1168
1169 free(reg_list);
1170 free(reg_packet);
1171
1172 return ERROR_OK;
1173 }
1174
1175 static int gdb_set_register_packet(struct connection *connection,
1176 struct target *target, char *packet, int packet_size)
1177 {
1178 char *separator;
1179 uint8_t *bin_buf;
1180 int reg_num = strtoul(packet + 1, &separator, 16);
1181 struct reg **reg_list;
1182 int reg_list_size;
1183 int retval;
1184
1185 LOG_DEBUG("-");
1186
1187 if ((retval = target_get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
1188 {
1189 return gdb_error(connection, retval);
1190 }
1191
1192 if (reg_list_size < reg_num)
1193 {
1194 LOG_ERROR("gdb requested a non-existing register");
1195 return ERROR_SERVER_REMOTE_CLOSED;
1196 }
1197
1198 if (*separator != '=')
1199 {
1200 LOG_ERROR("GDB 'set register packet', but no '=' following the register number");
1201 return ERROR_SERVER_REMOTE_CLOSED;
1202 }
1203
1204 /* convert from GDB-string (target-endian) to hex-string (big-endian) */
1205 bin_buf = malloc(DIV_ROUND_UP(reg_list[reg_num]->size, 8));
1206 int chars = (DIV_ROUND_UP(reg_list[reg_num]->size, 8) * 2);
1207
1208 /* fix!!! add some sanity checks on packet size here */
1209
1210 gdb_target_to_reg(target, separator + 1, chars, bin_buf);
1211
1212 reg_list[reg_num]->type->set(reg_list[reg_num], bin_buf);
1213
1214 gdb_put_packet(connection, "OK", 2);
1215
1216 free(bin_buf);
1217 free(reg_list);
1218
1219 return ERROR_OK;
1220 }
1221
1222 static int gdb_error(struct connection *connection, int retval)
1223 {
1224 switch (retval)
1225 {
1226 case ERROR_TARGET_DATA_ABORT:
1227 gdb_send_error(connection, EIO);
1228 break;
1229 case ERROR_TARGET_TRANSLATION_FAULT:
1230 gdb_send_error(connection, EFAULT);
1231 break;
1232 case ERROR_TARGET_UNALIGNED_ACCESS:
1233 gdb_send_error(connection, EFAULT);
1234 break;
1235 case ERROR_TARGET_NOT_HALTED:
1236 gdb_send_error(connection, EFAULT);
1237 break;
1238 default:
1239 /* This could be that the target reset itself. */
1240 LOG_ERROR("unexpected error %i", retval);
1241 gdb_send_error(connection, EFAULT);
1242 break;
1243 }
1244
1245 return ERROR_OK;
1246 }
1247
1248 /* We don't have to worry about the default 2 second timeout for GDB packets,
1249 * because GDB breaks up large memory reads into smaller reads.
1250 *
1251 * 8191 bytes by the looks of it. Why 8191 bytes instead of 8192?????
1252 */
1253 static int gdb_read_memory_packet(struct connection *connection,
1254 struct target *target, char *packet, int packet_size)
1255 {
1256 char *separator;
1257 uint32_t addr = 0;
1258 uint32_t len = 0;
1259
1260 uint8_t *buffer;
1261 char *hex_buffer;
1262
1263 int retval = ERROR_OK;
1264
1265 /* skip command character */
1266 packet++;
1267
1268 addr = strtoul(packet, &separator, 16);
1269
1270 if (*separator != ',')
1271 {
1272 LOG_ERROR("incomplete read memory packet received, dropping connection");
1273 return ERROR_SERVER_REMOTE_CLOSED;
1274 }
1275
1276 len = strtoul(separator + 1, NULL, 16);
1277
1278 buffer = malloc(len);
1279
1280 LOG_DEBUG("addr: 0x%8.8" PRIx32 ", len: 0x%8.8" PRIx32 "", addr, len);
1281
1282 retval = target_read_buffer(target, addr, len, buffer);
1283
1284 if ((retval != ERROR_OK)&&!gdb_report_data_abort)
1285 {
1286 /* TODO : Here we have to lie and send back all zero's lest stack traces won't work.
1287 * At some point this might be fixed in GDB, in which case this code can be removed.
1288 *
1289 * OpenOCD developers are acutely aware of this problem, but there is nothing
1290 * gained by involving the user in this problem that hopefully will get resolved
1291 * eventually
1292 *
1293 * http://sourceware.org/cgi-bin/gnatsweb.pl?cmd = view%20audit-trail&database = gdb&pr = 2395
1294 *
1295 * For now, the default is to fix up things to make current GDB versions work.
1296 * This can be overwritten using the gdb_report_data_abort <'enable'|'disable'> command.
1297 */
1298 memset(buffer, 0, len);
1299 retval = ERROR_OK;
1300 }
1301
1302 if (retval == ERROR_OK)
1303 {
1304 hex_buffer = malloc(len * 2 + 1);
1305
1306 uint32_t i;
1307 for (i = 0; i < len; i++)
1308 {
1309 uint8_t t = buffer[i];
1310 hex_buffer[2 * i] = DIGITS[(t >> 4) & 0xf];
1311 hex_buffer[2 * i + 1] = DIGITS[t & 0xf];
1312 }
1313
1314 gdb_put_packet(connection, hex_buffer, len * 2);
1315
1316 free(hex_buffer);
1317 }
1318 else
1319 {
1320 retval = gdb_error(connection, retval);
1321 }
1322
1323 free(buffer);
1324
1325 return retval;
1326 }
1327
1328 static int gdb_write_memory_packet(struct connection *connection,
1329 struct target *target, char *packet, int packet_size)
1330 {
1331 char *separator;
1332 uint32_t addr = 0;
1333 uint32_t len = 0;
1334
1335 uint8_t *buffer;
1336
1337 uint32_t i;
1338 int retval;
1339
1340 /* skip command character */
1341 packet++;
1342
1343 addr = strtoul(packet, &separator, 16);
1344
1345 if (*separator != ',')
1346 {
1347 LOG_ERROR("incomplete write memory packet received, dropping connection");
1348 return ERROR_SERVER_REMOTE_CLOSED;
1349 }
1350
1351 len = strtoul(separator + 1, &separator, 16);
1352
1353 if (*(separator++) != ':')
1354 {
1355 LOG_ERROR("incomplete write memory packet received, dropping connection");
1356 return ERROR_SERVER_REMOTE_CLOSED;
1357 }
1358
1359 buffer = malloc(len);
1360
1361 LOG_DEBUG("addr: 0x%8.8" PRIx32 ", len: 0x%8.8" PRIx32 "", addr, len);
1362
1363 for (i = 0; i < len; i++)
1364 {
1365 uint32_t tmp;
1366 sscanf(separator + 2*i, "%2" SCNx32 , &tmp);
1367 buffer[i] = tmp;
1368 }
1369
1370 retval = target_write_buffer(target, addr, len, buffer);
1371
1372 if (retval == ERROR_OK)
1373 {
1374 gdb_put_packet(connection, "OK", 2);
1375 }
1376 else
1377 {
1378 retval = gdb_error(connection, retval);
1379 }
1380
1381 free(buffer);
1382
1383 return retval;
1384 }
1385
1386 static int gdb_write_memory_binary_packet(struct connection *connection,
1387 struct target *target, char *packet, int packet_size)
1388 {
1389 char *separator;
1390 uint32_t addr = 0;
1391 uint32_t len = 0;
1392
1393 int retval = ERROR_OK;
1394
1395 /* skip command character */
1396 packet++;
1397
1398 addr = strtoul(packet, &separator, 16);
1399
1400 if (*separator != ',')
1401 {
1402 LOG_ERROR("incomplete write memory binary packet received, dropping connection");
1403 return ERROR_SERVER_REMOTE_CLOSED;
1404 }
1405
1406 len = strtoul(separator + 1, &separator, 16);
1407
1408 if (*(separator++) != ':')
1409 {
1410 LOG_ERROR("incomplete write memory binary packet received, dropping connection");
1411 return ERROR_SERVER_REMOTE_CLOSED;
1412 }
1413
1414 struct gdb_connection *gdb_connection = connection->priv;
1415
1416 if (gdb_connection->mem_write_error)
1417 {
1418 retval = ERROR_FAIL;
1419 /* now that we have reported the memory write error, we can clear the condition */
1420 gdb_connection->mem_write_error = false;
1421 }
1422
1423 /* By replying the packet *immediately* GDB will send us a new packet
1424 * while we write the last one to the target.
1425 */
1426 if (retval == ERROR_OK)
1427 {
1428 gdb_put_packet(connection, "OK", 2);
1429 }
1430 else
1431 {
1432 if ((retval = gdb_error(connection, retval)) != ERROR_OK)
1433 return retval;
1434 }
1435
1436 if (len)
1437 {
1438 LOG_DEBUG("addr: 0x%8.8" PRIx32 ", len: 0x%8.8" PRIx32 "", addr, len);
1439
1440 retval = target_write_buffer(target, addr, len, (uint8_t*)separator);
1441 if (retval != ERROR_OK)
1442 {
1443 gdb_connection->mem_write_error = true;
1444 }
1445 }
1446
1447 return ERROR_OK;
1448 }
1449
1450 static int gdb_step_continue_packet(struct connection *connection,
1451 struct target *target, char *packet, int packet_size)
1452 {
1453 int current = 0;
1454 uint32_t address = 0x0;
1455 int retval = ERROR_OK;
1456
1457 LOG_DEBUG("-");
1458
1459 if (packet_size > 1)
1460 {
1461 packet[packet_size] = 0;
1462 address = strtoul(packet + 1, NULL, 16);
1463 }
1464 else
1465 {
1466 current = 1;
1467 }
1468
1469 if (packet[0] == 'c')
1470 {
1471 LOG_DEBUG("continue");
1472 target_handle_event(target, TARGET_EVENT_OLD_pre_resume);
1473 retval = target_resume(target, current, address, 0, 0); /* resume at current address, don't handle breakpoints, not debugging */
1474 }
1475 else if (packet[0] == 's')
1476 {
1477 LOG_DEBUG("step");
1478 /* step at current or address, don't handle breakpoints */
1479 retval = target_step(target, current, address, 0);
1480 }
1481 return retval;
1482 }
1483
1484 static int gdb_breakpoint_watchpoint_packet(struct connection *connection,
1485 struct target *target, char *packet, int packet_size)
1486 {
1487 int type;
1488 enum breakpoint_type bp_type = BKPT_SOFT /* dummy init to avoid warning */;
1489 enum watchpoint_rw wp_type = WPT_READ /* dummy init to avoid warning */;
1490 uint32_t address;
1491 uint32_t size;
1492 char *separator;
1493 int retval;
1494
1495 LOG_DEBUG("-");
1496
1497 type = strtoul(packet + 1, &separator, 16);
1498
1499 if (type == 0) /* memory breakpoint */
1500 bp_type = BKPT_SOFT;
1501 else if (type == 1) /* hardware breakpoint */
1502 bp_type = BKPT_HARD;
1503 else if (type == 2) /* write watchpoint */
1504 wp_type = WPT_WRITE;
1505 else if (type == 3) /* read watchpoint */
1506 wp_type = WPT_READ;
1507 else if (type == 4) /* access watchpoint */
1508 wp_type = WPT_ACCESS;
1509 else
1510 {
1511 LOG_ERROR("invalid gdb watch/breakpoint type(%d), dropping connection", type);
1512 return ERROR_SERVER_REMOTE_CLOSED;
1513 }
1514
1515
1516 if (gdb_breakpoint_override && ((bp_type == BKPT_SOFT)||(bp_type == BKPT_HARD)))
1517 {
1518 bp_type = gdb_breakpoint_override_type;
1519 }
1520
1521 if (*separator != ',')
1522 {
1523 LOG_ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
1524 return ERROR_SERVER_REMOTE_CLOSED;
1525 }
1526
1527 address = strtoul(separator + 1, &separator, 16);
1528
1529 if (*separator != ',')
1530 {
1531 LOG_ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
1532 return ERROR_SERVER_REMOTE_CLOSED;
1533 }
1534
1535 size = strtoul(separator + 1, &separator, 16);
1536
1537 switch (type)
1538 {
1539 case 0:
1540 case 1:
1541 if (packet[0] == 'Z')
1542 {
1543 if ((retval = breakpoint_add(target, address, size, bp_type)) != ERROR_OK)
1544 {
1545 if ((retval = gdb_error(connection, retval)) != ERROR_OK)
1546 return retval;
1547 }
1548 else
1549 {
1550 gdb_put_packet(connection, "OK", 2);
1551 }
1552 }
1553 else
1554 {
1555 breakpoint_remove(target, address);
1556 gdb_put_packet(connection, "OK", 2);
1557 }
1558 break;
1559 case 2:
1560 case 3:
1561 case 4:
1562 {
1563 if (packet[0] == 'Z')
1564 {
1565 if ((retval = watchpoint_add(target, address, size, wp_type, 0, 0xffffffffu)) != ERROR_OK)
1566 {
1567 if ((retval = gdb_error(connection, retval)) != ERROR_OK)
1568 return retval;
1569 }
1570 else
1571 {
1572 gdb_put_packet(connection, "OK", 2);
1573 }
1574 }
1575 else
1576 {
1577 watchpoint_remove(target, address);
1578 gdb_put_packet(connection, "OK", 2);
1579 }
1580 break;
1581 }
1582 default:
1583 break;
1584 }
1585
1586 return ERROR_OK;
1587 }
1588
1589 /* print out a string and allocate more space as needed,
1590 * mainly used for XML at this point
1591 */
1592 static void xml_printf(int *retval, char **xml, int *pos, int *size,
1593 const char *fmt, ...)
1594 {
1595 if (*retval != ERROR_OK)
1596 {
1597 return;
1598 }
1599 int first = 1;
1600
1601 for (;;)
1602 {
1603 if ((*xml == NULL) || (!first))
1604 {
1605 /* start by 0 to exercise all the code paths.
1606 * Need minimum 2 bytes to fit 1 char and 0 terminator. */
1607
1608 *size = *size * 2 + 2;
1609 char *t = *xml;
1610 *xml = realloc(*xml, *size);
1611 if (*xml == NULL)
1612 {
1613 if (t)
1614 free(t);
1615 *retval = ERROR_SERVER_REMOTE_CLOSED;
1616 return;
1617 }
1618 }
1619
1620 va_list ap;
1621 int ret;
1622 va_start(ap, fmt);
1623 ret = vsnprintf(*xml + *pos, *size - *pos, fmt, ap);
1624 va_end(ap);
1625 if ((ret > 0) && ((ret + 1) < *size - *pos))
1626 {
1627 *pos += ret;
1628 return;
1629 }
1630 /* there was just enough or not enough space, allocate more. */
1631 first = 0;
1632 }
1633 }
1634
1635 static int decode_xfer_read(char *buf, char **annex, int *ofs, unsigned int *len)
1636 {
1637 char *separator;
1638
1639 /* Extract and NUL-terminate the annex. */
1640 *annex = buf;
1641 while (*buf && *buf != ':')
1642 buf++;
1643 if (*buf == '\0')
1644 return -1;
1645 *buf++ = 0;
1646
1647 /* After the read marker and annex, qXfer looks like a
1648 * traditional 'm' packet. */
1649
1650 *ofs = strtoul(buf, &separator, 16);
1651
1652 if (*separator != ',')
1653 return -1;
1654
1655 *len = strtoul(separator + 1, NULL, 16);
1656
1657 return 0;
1658 }
1659
1660 static int compare_bank (const void * a, const void * b)
1661 {
1662 struct flash_bank *b1, *b2;
1663 b1=*((struct flash_bank **)a);
1664 b2=*((struct flash_bank **)b);
1665
1666 if (b1->base == b2->base)
1667 {
1668 return 0;
1669 } else if (b1->base > b2->base)
1670 {
1671 return 1;
1672 } else
1673 {
1674 return -1;
1675 }
1676 }
1677
1678 static int gdb_memory_map(struct connection *connection,
1679 struct target *target, char *packet, int packet_size)
1680 {
1681 /* We get away with only specifying flash here. Regions that are not
1682 * specified are treated as if we provided no memory map(if not we
1683 * could detect the holes and mark them as RAM).
1684 * Normally we only execute this code once, but no big deal if we
1685 * have to regenerate it a couple of times.
1686 */
1687
1688 struct flash_bank *p;
1689 char *xml = NULL;
1690 int size = 0;
1691 int pos = 0;
1692 int retval = ERROR_OK;
1693 struct flash_bank **banks;
1694 int offset;
1695 int length;
1696 char *separator;
1697 uint32_t ram_start = 0;
1698 int i;
1699
1700 /* skip command character */
1701 packet += 23;
1702
1703 offset = strtoul(packet, &separator, 16);
1704 length = strtoul(separator + 1, &separator, 16);
1705
1706 xml_printf(&retval, &xml, &pos, &size, "<memory-map>\n");
1707
1708 /* Sort banks in ascending order. We need to report non-flash
1709 * memory as ram (or rather read/write) by default for GDB, since
1710 * it has no concept of non-cacheable read/write memory (i/o etc).
1711 *
1712 * FIXME Most non-flash addresses are *NOT* RAM! Don't lie.
1713 * Current versions of GDB assume unlisted addresses are RAM...
1714 */
1715 banks = malloc(sizeof(struct flash_bank *)*flash_get_bank_count());
1716
1717 for (i = 0; i < flash_get_bank_count(); i++) {
1718 retval = get_flash_bank_by_num(i, &p);
1719 if (retval != ERROR_OK)
1720 {
1721 free(banks);
1722 gdb_send_error(connection, retval);
1723 return retval;
1724 }
1725 banks[i] = p;
1726 }
1727
1728 qsort(banks, flash_get_bank_count(), sizeof(struct flash_bank *),
1729 compare_bank);
1730
1731 for (i = 0; i < flash_get_bank_count(); i++) {
1732 int j;
1733 unsigned sector_size = 0;
1734 uint32_t start, end;
1735
1736 p = banks[i];
1737 start = p->base;
1738 end = p->base + p->size;
1739
1740 if (ram_start < p->base)
1741 xml_printf(&retval, &xml, &pos, &size,
1742 "<memory type=\"ram\" start=\"0x%x\" "
1743 "length=\"0x%x\"/>\n",
1744 ram_start, p->base - ram_start);
1745
1746 /* Report adjacent groups of same-size sectors. So for
1747 * example top boot CFI flash will list an initial region
1748 * with several large sectors (maybe 128KB) and several
1749 * smaller ones at the end (maybe 32KB). STR7 will have
1750 * regions with 8KB, 32KB, and 64KB sectors; etc.
1751 */
1752 for (j = 0; j < p->num_sectors; j++) {
1753 unsigned group_len;
1754
1755 /* Maybe start a new group of sectors. */
1756 if (sector_size == 0) {
1757 start = p->base + p->sectors[j].offset;
1758 xml_printf(&retval, &xml, &pos, &size,
1759 "<memory type=\"flash\" "
1760 "start=\"0x%x\" ",
1761 start);
1762 sector_size = p->sectors[j].size;
1763 }
1764
1765 /* Does this finish a group of sectors?
1766 * If not, continue an already-started group.
1767 */
1768 if (j == p->num_sectors -1)
1769 group_len = (p->base + p->size) - start;
1770 else if (p->sectors[j + 1].size != sector_size)
1771 group_len = p->base + p->sectors[j + 1].offset
1772 - start;
1773 else
1774 continue;
1775
1776 xml_printf(&retval, &xml, &pos, &size,
1777 "length=\"0x%x\">\n"
1778 "<property name=\"blocksize\">"
1779 "0x%x</property>\n"
1780 "</memory>\n",
1781 group_len,
1782 sector_size);
1783 sector_size = 0;
1784 }
1785
1786 ram_start = p->base + p->size;
1787 }
1788
1789 if (ram_start != 0)
1790 xml_printf(&retval, &xml, &pos, &size,
1791 "<memory type=\"ram\" start=\"0x%x\" "
1792 "length=\"0x%x\"/>\n",
1793 ram_start, 0-ram_start);
1794 /* ELSE a flash chip could be at the very end of the 32 bit address
1795 * space, in which case ram_start will be precisely 0
1796 */
1797
1798 free(banks);
1799 banks = NULL;
1800
1801 xml_printf(&retval, &xml, &pos, &size, "</memory-map>\n");
1802
1803 if (retval != ERROR_OK) {
1804 gdb_send_error(connection, retval);
1805 return retval;
1806 }
1807
1808 if (offset + length > pos)
1809 length = pos - offset;
1810
1811 char *t = malloc(length + 1);
1812 t[0] = 'l';
1813 memcpy(t + 1, xml + offset, length);
1814 gdb_put_packet(connection, t, length + 1);
1815
1816 free(t);
1817 free(xml);
1818 return ERROR_OK;
1819 }
1820
1821 static int gdb_query_packet(struct connection *connection,
1822 struct target *target, char *packet, int packet_size)
1823 {
1824 struct command_context *cmd_ctx = connection->cmd_ctx;
1825 struct gdb_connection *gdb_connection = connection->priv;
1826
1827 if (strstr(packet, "qRcmd,"))
1828 {
1829 if (packet_size > 6)
1830 {
1831 char *cmd;
1832 int i;
1833 cmd = malloc((packet_size - 6)/2 + 1);
1834 for (i = 0; i < (packet_size - 6)/2; i++)
1835 {
1836 uint32_t tmp;
1837 sscanf(packet + 6 + 2*i, "%2" SCNx32 , &tmp);
1838 cmd[i] = tmp;
1839 }
1840 cmd[(packet_size - 6)/2] = 0x0;
1841
1842 /* We want to print all debug output to GDB connection */
1843 log_add_callback(gdb_log_callback, connection);
1844 target_call_timer_callbacks_now();
1845 /* some commands need to know the GDB connection, make note of current
1846 * GDB connection. */
1847 current_gdb_connection = gdb_connection;
1848 command_run_line(cmd_ctx, cmd);
1849 current_gdb_connection = NULL;
1850 target_call_timer_callbacks_now();
1851 log_remove_callback(gdb_log_callback, connection);
1852 free(cmd);
1853 }
1854 gdb_put_packet(connection, "OK", 2);
1855 return ERROR_OK;
1856 }
1857 else if (strstr(packet, "qCRC:"))
1858 {
1859 if (packet_size > 5)
1860 {
1861 int retval;
1862 char gdb_reply[10];
1863 char *separator;
1864 uint32_t checksum;
1865 uint32_t addr = 0;
1866 uint32_t len = 0;
1867
1868 /* skip command character */
1869 packet += 5;
1870
1871 addr = strtoul(packet, &separator, 16);
1872
1873 if (*separator != ',')
1874 {
1875 LOG_ERROR("incomplete read memory packet received, dropping connection");
1876 return ERROR_SERVER_REMOTE_CLOSED;
1877 }
1878
1879 len = strtoul(separator + 1, NULL, 16);
1880
1881 retval = target_checksum_memory(target, addr, len, &checksum);
1882
1883 if (retval == ERROR_OK)
1884 {
1885 snprintf(gdb_reply, 10, "C%8.8" PRIx32 "", checksum);
1886 gdb_put_packet(connection, gdb_reply, 9);
1887 }
1888 else
1889 {
1890 if ((retval = gdb_error(connection, retval)) != ERROR_OK)
1891 return retval;
1892 }
1893
1894 return ERROR_OK;
1895 }
1896 }
1897 else if (strstr(packet, "qSupported"))
1898 {
1899 /* we currently support packet size and qXfer:memory-map:read (if enabled)
1900 * disable qXfer:features:read for the moment */
1901 int retval = ERROR_OK;
1902 char *buffer = NULL;
1903 int pos = 0;
1904 int size = 0;
1905
1906 xml_printf(&retval, &buffer, &pos, &size,
1907 "PacketSize=%x;qXfer:memory-map:read%c;qXfer:features:read-;QStartNoAckMode+",
1908 (GDB_BUFFER_SIZE - 1), ((gdb_use_memory_map == 1) && (flash_get_bank_count() > 0)) ? '+' : '-');
1909
1910 if (retval != ERROR_OK)
1911 {
1912 gdb_send_error(connection, 01);
1913 return ERROR_OK;
1914 }
1915
1916 gdb_put_packet(connection, buffer, strlen(buffer));
1917 free(buffer);
1918
1919 return ERROR_OK;
1920 }
1921 else if (strstr(packet, "qXfer:memory-map:read::")
1922 && (flash_get_bank_count() > 0))
1923 return gdb_memory_map(connection, target, packet, packet_size);
1924 else if (strstr(packet, "qXfer:features:read:"))
1925 {
1926 char *xml = NULL;
1927 int size = 0;
1928 int pos = 0;
1929 int retval = ERROR_OK;
1930
1931 int offset;
1932 unsigned int length;
1933 char *annex;
1934
1935 /* skip command character */
1936 packet += 20;
1937
1938 if (decode_xfer_read(packet, &annex, &offset, &length) < 0)
1939 {
1940 gdb_send_error(connection, 01);
1941 return ERROR_OK;
1942 }
1943
1944 if (strcmp(annex, "target.xml") != 0)
1945 {
1946 gdb_send_error(connection, 01);
1947 return ERROR_OK;
1948 }
1949
1950 xml_printf(&retval, &xml, &pos, &size, \
1951 "l < target version=\"1.0\">\n < architecture > arm</architecture>\n</target>\n");
1952
1953 if (retval != ERROR_OK)
1954 {
1955 gdb_send_error(connection, retval);
1956 return retval;
1957 }
1958
1959 gdb_put_packet(connection, xml, strlen(xml));
1960
1961 free(xml);
1962 return ERROR_OK;
1963 }
1964 else if (strstr(packet, "QStartNoAckMode"))
1965 {
1966 gdb_connection->noack_mode = 1;
1967 gdb_put_packet(connection, "OK", 2);
1968 return ERROR_OK;
1969 }
1970
1971 gdb_put_packet(connection, "", 0);
1972 return ERROR_OK;
1973 }
1974
1975 static int gdb_v_packet(struct connection *connection,
1976 struct target *target, char *packet, int packet_size)
1977 {
1978 struct gdb_connection *gdb_connection = connection->priv;
1979 struct gdb_service *gdb_service = connection->service->priv;
1980 int result;
1981
1982 /* if flash programming disabled - send a empty reply */
1983
1984 if (gdb_flash_program == 0)
1985 {
1986 gdb_put_packet(connection, "", 0);
1987 return ERROR_OK;
1988 }
1989
1990 if (strstr(packet, "vFlashErase:"))
1991 {
1992 unsigned long addr;
1993 unsigned long length;
1994
1995 char *parse = packet + 12;
1996 if (*parse == '\0')
1997 {
1998 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
1999 return ERROR_SERVER_REMOTE_CLOSED;
2000 }
2001
2002 addr = strtoul(parse, &parse, 16);
2003
2004 if (*(parse++) != ',' || *parse == '\0')
2005 {
2006 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2007 return ERROR_SERVER_REMOTE_CLOSED;
2008 }
2009
2010 length = strtoul(parse, &parse, 16);
2011
2012 if (*parse != '\0')
2013 {
2014 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2015 return ERROR_SERVER_REMOTE_CLOSED;
2016 }
2017
2018 /* assume all sectors need erasing - stops any problems
2019 * when flash_write is called multiple times */
2020 flash_set_dirty();
2021
2022 /* perform any target specific operations before the erase */
2023 target_call_event_callbacks(gdb_service->target,
2024 TARGET_EVENT_GDB_FLASH_ERASE_START);
2025
2026 /* vFlashErase:addr,length messages require region start and
2027 * end to be "block" aligned ... if padding is ever needed,
2028 * GDB will have become dangerously confused.
2029 */
2030 result = flash_erase_address_range(gdb_service->target,
2031 false, addr, length);
2032
2033 /* perform any target specific operations after the erase */
2034 target_call_event_callbacks(gdb_service->target,
2035 TARGET_EVENT_GDB_FLASH_ERASE_END);
2036
2037 /* perform erase */
2038 if (result != ERROR_OK)
2039 {
2040 /* GDB doesn't evaluate the actual error number returned,
2041 * treat a failed erase as an I/O error
2042 */
2043 gdb_send_error(connection, EIO);
2044 LOG_ERROR("flash_erase returned %i", result);
2045 }
2046 else
2047 gdb_put_packet(connection, "OK", 2);
2048
2049 return ERROR_OK;
2050 }
2051
2052 if (strstr(packet, "vFlashWrite:"))
2053 {
2054 int retval;
2055 unsigned long addr;
2056 unsigned long length;
2057 char *parse = packet + 12;
2058
2059 if (*parse == '\0')
2060 {
2061 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2062 return ERROR_SERVER_REMOTE_CLOSED;
2063 }
2064 addr = strtoul(parse, &parse, 16);
2065 if (*(parse++) != ':')
2066 {
2067 LOG_ERROR("incomplete vFlashErase packet received, dropping connection");
2068 return ERROR_SERVER_REMOTE_CLOSED;
2069 }
2070 length = packet_size - (parse - packet);
2071
2072 /* create a new image if there isn't already one */
2073 if (gdb_connection->vflash_image == NULL)
2074 {
2075 gdb_connection->vflash_image = malloc(sizeof(struct image));
2076 image_open(gdb_connection->vflash_image, "", "build");
2077 }
2078
2079 /* create new section with content from packet buffer */
2080 if ((retval = image_add_section(gdb_connection->vflash_image, addr, length, 0x0, (uint8_t*)parse)) != ERROR_OK)
2081 {
2082 return retval;
2083 }
2084
2085 gdb_put_packet(connection, "OK", 2);
2086
2087 return ERROR_OK;
2088 }
2089
2090 if (!strcmp(packet, "vFlashDone"))
2091 {
2092 uint32_t written;
2093
2094 /* process the flashing buffer. No need to erase as GDB
2095 * always issues a vFlashErase first. */
2096 target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_WRITE_START);
2097 result = flash_write(gdb_service->target, gdb_connection->vflash_image, &written, 0);
2098 target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_WRITE_END);
2099 if (result != ERROR_OK)
2100 {
2101 if (result == ERROR_FLASH_DST_OUT_OF_BANK)
2102 gdb_put_packet(connection, "E.memtype", 9);
2103 else
2104 gdb_send_error(connection, EIO);
2105 }
2106 else
2107 {
2108 LOG_DEBUG("wrote %u bytes from vFlash image to flash", (unsigned)written);
2109 gdb_put_packet(connection, "OK", 2);
2110 }
2111
2112 image_close(gdb_connection->vflash_image);
2113 free(gdb_connection->vflash_image);
2114 gdb_connection->vflash_image = NULL;
2115
2116 return ERROR_OK;
2117 }
2118
2119 gdb_put_packet(connection, "", 0);
2120 return ERROR_OK;
2121 }
2122
2123 static int gdb_detach(struct connection *connection, struct target *target)
2124 {
2125 struct gdb_service *gdb_service = connection->service->priv;
2126
2127 target_call_event_callbacks(gdb_service->target,
2128 TARGET_EVENT_GDB_DETACH);
2129
2130 return gdb_put_packet(connection, "OK", 2);
2131 }
2132
2133 static void gdb_log_callback(void *priv, const char *file, unsigned line,
2134 const char *function, const char *string)
2135 {
2136 struct connection *connection = priv;
2137 struct gdb_connection *gdb_con = connection->priv;
2138
2139 if (gdb_con->busy)
2140 {
2141 /* do not reply this using the O packet */
2142 return;
2143 }
2144
2145 gdb_output_con(connection, string);
2146 }
2147
2148 static void gdb_sig_halted(struct connection *connection)
2149 {
2150 char sig_reply[4];
2151 snprintf(sig_reply, 4, "T%2.2x", 2);
2152 gdb_put_packet(connection, sig_reply, 3);
2153
2154 }
2155
2156 static int gdb_input_inner(struct connection *connection)
2157 {
2158 /* Do not allocate this on the stack */
2159 static char gdb_packet_buffer[GDB_BUFFER_SIZE];
2160
2161 struct gdb_service *gdb_service = connection->service->priv;
2162 struct target *target = gdb_service->target;
2163 char *packet = gdb_packet_buffer;
2164 int packet_size;
2165 int retval;
2166 struct gdb_connection *gdb_con = connection->priv;
2167 static int extended_protocol = 0;
2168
2169 /* drain input buffer */
2170 do
2171 {
2172 packet_size = GDB_BUFFER_SIZE-1;
2173 retval = gdb_get_packet(connection, packet, &packet_size);
2174 if (retval != ERROR_OK)
2175 return retval;
2176
2177 /* terminate with zero */
2178 packet[packet_size] = 0;
2179
2180 if (LOG_LEVEL_IS(LOG_LVL_DEBUG)) {
2181 if (packet[0] == 'X') {
2182 // binary packets spew junk into the debug log stream
2183 char buf[ 50 ];
2184 int x;
2185 for (x = 0 ; (x < 49) && (packet[x] != ':') ; x++) {
2186 buf[x] = packet[x];
2187 }
2188 buf[x] = 0;
2189 LOG_DEBUG("received packet: '%s:<binary-data>'", buf);
2190 } else {
2191 LOG_DEBUG("received packet: '%s'", packet);
2192 }
2193 }
2194
2195 if (packet_size > 0)
2196 {
2197 retval = ERROR_OK;
2198 switch (packet[0])
2199 {
2200 case 'H':
2201 /* Hct... -- set thread
2202 * we don't have threads, send empty reply */
2203 gdb_put_packet(connection, NULL, 0);
2204 break;
2205 case 'q':
2206 case 'Q':
2207 retval = gdb_query_packet(connection,
2208 target, packet,
2209 packet_size);
2210 break;
2211 case 'g':
2212 retval = gdb_get_registers_packet(
2213 connection, target,
2214 packet, packet_size);
2215 break;
2216 case 'G':
2217 retval = gdb_set_registers_packet(
2218 connection, target,
2219 packet, packet_size);
2220 break;
2221 case 'p':
2222 retval = gdb_get_register_packet(
2223 connection, target,
2224 packet, packet_size);
2225 break;
2226 case 'P':
2227 retval = gdb_set_register_packet(
2228 connection, target,
2229 packet, packet_size);
2230 break;
2231 case 'm':
2232 retval = gdb_read_memory_packet(
2233 connection, target,
2234 packet, packet_size);
2235 break;
2236 case 'M':
2237 retval = gdb_write_memory_packet(
2238 connection, target,
2239 packet, packet_size);
2240 break;
2241 case 'z':
2242 case 'Z':
2243 retval = gdb_breakpoint_watchpoint_packet(connection, target, packet, packet_size);
2244 break;
2245 case '?':
2246 gdb_last_signal_packet(
2247 connection, target,
2248 packet, packet_size);
2249 break;
2250 case 'c':
2251 case 's':
2252 {
2253 int retval = ERROR_OK;
2254
2255 struct gdb_connection *gdb_con = connection->priv;
2256 log_add_callback(gdb_log_callback, connection);
2257
2258 if (gdb_con->mem_write_error)
2259 {
2260 LOG_ERROR("Memory write failure!");
2261
2262 /* now that we have reported the memory write error, we can clear the condition */
2263 gdb_con->mem_write_error = false;
2264 }
2265
2266 bool nostep = false;
2267 bool already_running = false;
2268 if (target->state == TARGET_RUNNING)
2269 {
2270 LOG_WARNING("WARNING! The target is already running. "
2271 "All changes GDB did to registers will be discarded! "
2272 "Waiting for target to halt.");
2273 already_running = true;
2274 } else if (target->state != TARGET_HALTED)
2275 {
2276 LOG_WARNING("The target is not in the halted nor running stated, stepi/continue ignored.");
2277 nostep = true;
2278 } else if ((packet[0] == 's') && gdb_con->sync)
2279 {
2280 /* Hmm..... when you issue a continue in GDB, then a "stepi" is
2281 * sent by GDB first to OpenOCD, thus defeating the check to
2282 * make only the single stepping have the sync feature...
2283 */
2284 nostep = true;
2285 LOG_WARNING("stepi ignored. GDB will now fetch the register state from the target.");
2286 }
2287 gdb_con->sync = false;
2288
2289 if ((retval!=ERROR_OK) || (!already_running && nostep))
2290 {
2291 /* Either the target isn't in the halted state, then we can't
2292 * step/continue. This might be early setup, etc.
2293 *
2294 * Or we want to allow GDB to pick up a fresh set of
2295 * register values without modifying the target state.
2296 *
2297 */
2298 gdb_sig_halted(connection);
2299
2300 /* stop forwarding log packets! */
2301 log_remove_callback(gdb_log_callback, connection);
2302 } else
2303 {
2304 /* We're running/stepping, in which case we can
2305 * forward log output until the target is halted
2306 */
2307 gdb_con->frontend_state = TARGET_RUNNING;
2308 target_call_event_callbacks(target, TARGET_EVENT_GDB_START);
2309
2310 if (!already_running)
2311 {
2312 int retval = gdb_step_continue_packet(connection, target, packet, packet_size);
2313 if (retval != ERROR_OK)
2314 {
2315 /* we'll never receive a halted condition... issue a false one.. */
2316 gdb_frontend_halted(target, connection);
2317 }
2318 }
2319 }
2320 }
2321 break;
2322 case 'v':
2323 retval = gdb_v_packet(
2324 connection, target,
2325 packet, packet_size);
2326 break;
2327 case 'D':
2328 retval = gdb_detach(connection, target);
2329 extended_protocol = 0;
2330 break;
2331 case 'X':
2332 retval = gdb_write_memory_binary_packet(
2333 connection, target,
2334 packet, packet_size);
2335 if (retval != ERROR_OK)
2336 return retval;
2337 break;
2338 case 'k':
2339 if (extended_protocol != 0)
2340 break;
2341 gdb_put_packet(connection, "OK", 2);
2342 return ERROR_SERVER_REMOTE_CLOSED;
2343 case '!':
2344 /* handle extended remote protocol */
2345 extended_protocol = 1;
2346 gdb_put_packet(connection, "OK", 2);
2347 break;
2348 case 'R':
2349 /* handle extended restart packet */
2350 breakpoint_clear_target(gdb_service->target);
2351 watchpoint_clear_target(gdb_service->target);
2352 command_run_linef(connection->cmd_ctx,
2353 "ocd_gdb_restart %s",
2354 target_name(target));
2355 break;
2356 default:
2357 /* ignore unknown packets */
2358 LOG_DEBUG("ignoring 0x%2.2x packet", packet[0]);
2359 gdb_put_packet(connection, NULL, 0);
2360 break;
2361 }
2362
2363 /* if a packet handler returned an error, exit input loop */
2364 if (retval != ERROR_OK)
2365 return retval;
2366 }
2367
2368 if (gdb_con->ctrl_c)
2369 {
2370 if (target->state == TARGET_RUNNING)
2371 {
2372 retval = target_halt(target);
2373 if (retval != ERROR_OK)
2374 {
2375 target_call_event_callbacks(target, TARGET_EVENT_GDB_HALT);
2376 }
2377 gdb_con->ctrl_c = 0;
2378 } else
2379 {
2380 LOG_INFO("The target is not running when halt was requested, stopping GDB.");
2381 target_call_event_callbacks(target, TARGET_EVENT_GDB_HALT);
2382 }
2383 }
2384
2385 } while (gdb_con->buf_cnt > 0);
2386
2387 return ERROR_OK;
2388 }
2389
2390 static int gdb_input(struct connection *connection)
2391 {
2392 int retval = gdb_input_inner(connection);
2393 struct gdb_connection *gdb_con = connection->priv;
2394 if (retval == ERROR_SERVER_REMOTE_CLOSED)
2395 return retval;
2396
2397 /* logging does not propagate the error, yet can set the gdb_con->closed flag */
2398 if (gdb_con->closed)
2399 return ERROR_SERVER_REMOTE_CLOSED;
2400
2401 /* we'll recover from any other errors(e.g. temporary timeouts, etc.) */
2402 return ERROR_OK;
2403 }
2404
2405 static int gdb_target_start(struct target *target, uint16_t port)
2406 {
2407 bool use_pipes = 0 == port;
2408 struct gdb_service *gdb_service = malloc(sizeof(struct gdb_service));
2409 if (NULL == gdb_service)
2410 return -ENOMEM;
2411
2412 gdb_service->target = target;
2413
2414 add_service("gdb", use_pipes ? CONNECTION_PIPE : CONNECTION_TCP,
2415 port, 1, &gdb_new_connection, &gdb_input,
2416 &gdb_connection_closed, gdb_service);
2417
2418 const char *name = target_name(target);
2419 if (use_pipes)
2420 LOG_DEBUG("gdb service for target '%s' using pipes", name);
2421 else
2422 LOG_DEBUG("gdb service for target '%s' on TCP port %u", name, port);
2423 return ERROR_OK;
2424 }
2425
2426 static int gdb_target_add_one(struct target *target)
2427 {
2428 if (gdb_port == 0 && server_use_pipes == 0)
2429 {
2430 LOG_INFO("gdb port disabled");
2431 return ERROR_OK;
2432 }
2433 if (0 == gdb_port_next)
2434 gdb_port_next = gdb_port;
2435
2436 bool use_pipes = server_use_pipes;
2437 static bool server_started_with_pipes = false;
2438 if (server_started_with_pipes)
2439 {
2440 LOG_WARNING("gdb service permits one target when using pipes");
2441 if (0 == gdb_port)
2442 return ERROR_OK;
2443
2444 use_pipes = false;
2445 }
2446
2447 int e = gdb_target_start(target, use_pipes ? 0 : gdb_port_next);
2448 if (ERROR_OK == e)
2449 {
2450 server_started_with_pipes |= use_pipes;
2451 gdb_port_next++;
2452 }
2453 return e;
2454 }
2455
2456 int gdb_target_add_all(struct target *target)
2457 {
2458 if (NULL == target)
2459 {
2460 LOG_WARNING("gdb services need one or more targets defined");
2461 return ERROR_OK;
2462 }
2463
2464 while (NULL != target)
2465 {
2466 int retval = gdb_target_add_one(target);
2467 if (ERROR_OK != retval)
2468 return retval;
2469
2470 target = target->next;
2471 }
2472
2473 return ERROR_OK;
2474 }
2475
2476 COMMAND_HANDLER(handle_gdb_sync_command)
2477 {
2478 if (CMD_ARGC != 0)
2479 {
2480 return ERROR_COMMAND_SYNTAX_ERROR;
2481 }
2482
2483 if (current_gdb_connection == NULL)
2484 {
2485 command_print(CMD_CTX,
2486 "gdb_sync command can only be run from within gdb using \"monitor gdb_sync\"");
2487 return ERROR_FAIL;
2488 }
2489
2490 current_gdb_connection->sync = true;
2491
2492 return ERROR_OK;
2493 }
2494
2495 /* daemon configuration command gdb_port */
2496 COMMAND_HANDLER(handle_gdb_port_command)
2497 {
2498 int retval = CALL_COMMAND_HANDLER(server_port_command, &gdb_port);
2499 if (ERROR_OK == retval)
2500 gdb_port_next = gdb_port;
2501 return retval;
2502 }
2503
2504 COMMAND_HANDLER(handle_gdb_memory_map_command)
2505 {
2506 if (CMD_ARGC != 1)
2507 return ERROR_COMMAND_SYNTAX_ERROR;
2508
2509 COMMAND_PARSE_ENABLE(CMD_ARGV[0], gdb_use_memory_map);
2510 return ERROR_OK;
2511 }
2512
2513 COMMAND_HANDLER(handle_gdb_flash_program_command)
2514 {
2515 if (CMD_ARGC != 1)
2516 return ERROR_COMMAND_SYNTAX_ERROR;
2517
2518 COMMAND_PARSE_ENABLE(CMD_ARGV[0], gdb_flash_program);
2519 return ERROR_OK;
2520 }
2521
2522 COMMAND_HANDLER(handle_gdb_report_data_abort_command)
2523 {
2524 if (CMD_ARGC != 1)
2525 return ERROR_COMMAND_SYNTAX_ERROR;
2526
2527 COMMAND_PARSE_ENABLE(CMD_ARGV[0], gdb_report_data_abort);
2528 return ERROR_OK;
2529 }
2530
2531 /* gdb_breakpoint_override */
2532 COMMAND_HANDLER(handle_gdb_breakpoint_override_command)
2533 {
2534 if (CMD_ARGC == 0)
2535 {
2536
2537 } else if (CMD_ARGC == 1)
2538 {
2539 gdb_breakpoint_override = 1;
2540 if (strcmp(CMD_ARGV[0], "hard") == 0)
2541 {
2542 gdb_breakpoint_override_type = BKPT_HARD;
2543 } else if (strcmp(CMD_ARGV[0], "soft") == 0)
2544 {
2545 gdb_breakpoint_override_type = BKPT_SOFT;
2546 } else if (strcmp(CMD_ARGV[0], "disable") == 0)
2547 {
2548 gdb_breakpoint_override = 0;
2549 }
2550 } else
2551 {
2552 return ERROR_COMMAND_SYNTAX_ERROR;
2553 }
2554 if (gdb_breakpoint_override)
2555 {
2556 LOG_USER("force %s breakpoints", (gdb_breakpoint_override_type == BKPT_HARD)?"hard":"soft");
2557 } else
2558 {
2559 LOG_USER("breakpoint type is not overridden");
2560 }
2561
2562 return ERROR_OK;
2563 }
2564
2565 static const struct command_registration gdb_command_handlers[] = {
2566 {
2567 .name = "gdb_sync",
2568 .handler = handle_gdb_sync_command,
2569 .mode = COMMAND_ANY,
2570 .help = "next stepi will return immediately allowing "
2571 "GDB to fetch register state without affecting "
2572 "target state",
2573 },
2574 {
2575 .name = "gdb_port",
2576 .handler = handle_gdb_port_command,
2577 .mode = COMMAND_ANY,
2578 .help = "Display or specify base port on which to listen "
2579 "for incoming GDB connections. "
2580 "No arguments reports GDB port; zero disables.",
2581 .usage = "[port_num]",
2582 },
2583 {
2584 .name = "gdb_memory_map",
2585 .handler = handle_gdb_memory_map_command,
2586 .mode = COMMAND_CONFIG,
2587 .help = "enable or disable memory map",
2588 .usage = "('enable'|'disable')"
2589 },
2590 {
2591 .name = "gdb_flash_program",
2592 .handler = handle_gdb_flash_program_command,
2593 .mode = COMMAND_CONFIG,
2594 .help = "enable or disable flash program",
2595 .usage = "('enable'|'disable')"
2596 },
2597 {
2598 .name = "gdb_report_data_abort",
2599 .handler = handle_gdb_report_data_abort_command,
2600 .mode = COMMAND_CONFIG,
2601 .help = "enable or disable reporting data aborts",
2602 .usage = "('enable'|'disable')"
2603 },
2604 {
2605 .name = "gdb_breakpoint_override",
2606 .handler = handle_gdb_breakpoint_override_command,
2607 .mode = COMMAND_ANY,
2608 .help = "Display or specify type of breakpoint "
2609 "to be used by gdb 'break' commands.",
2610 .usage = "('hard'|'soft'|'disable')"
2611 },
2612 COMMAND_REGISTRATION_DONE
2613 };
2614
2615 int gdb_register_commands(struct command_context *cmd_ctx)
2616 {
2617 return register_commands(cmd_ctx, NULL, gdb_command_handlers);
2618 }