1 /***************************************************************************
2 * Copyright (C) 2007-2010 by Øyvind Harboe *
4 * This program is free software; you can redistribute it and/or modify *
5 * it under the terms of the GNU General Public License as published by *
6 * the Free Software Foundation; either version 2 of the License, or *
7 * (at your option) any later version. *
9 * This program is distributed in the hope that it will be useful, *
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
12 * GNU General Public License for more details. *
14 * You should have received a copy of the GNU General Public License *
15 * along with this program; if not, write to the *
16 * Free Software Foundation, Inc., *
17 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
18 ***************************************************************************/
20 /* used to test manual mode */
21 #define TEST_MANUAL() 0
24 #if BUILD_ZY1000_MASTER
27 #include <cyg/hal/hal_io.h> // low level i/o
28 #include <cyg/hal/hal_intr.h> // low level i/o
29 #define ZY1000_PEEK(a, b) HAL_READ_UINT32(a, b)
30 #define ZY1000_POKE(a, b) HAL_WRITE_UINT32(a, b)
32 #define ZY1000_PEEK(a, b) do {b = *( ( volatile uint32_t *)(a) );} while (0)
33 #define ZY1000_POKE(a, b) do {*( ( volatile uint32_t *)(a) ) = b;} while (0)
34 extern volatile void *zy1000_jtag_master
;
35 #define ZY1000_JTAG_BASE ((unsigned long)zy1000_jtag_master)
40 /* redirect this to TCP/IP */
41 #define ZY1000_JTAG_BASE 0
42 extern void zy1000_tcpout(uint32_t address
, uint32_t data
);
43 extern uint32_t zy1000_tcpin(uint32_t address
);
44 #define ZY1000_PEEK(a, b) b=zy1000_tcpin(a)
45 #define ZY1000_POKE(a, b) zy1000_tcpout(a, b)
51 #if BUILD_ZY1000_MASTER
53 static __inline__
void waitIdle(void)
58 ZY1000_PEEK(ZY1000_JTAG_BASE
+ 0x10, empty
);
59 } while ((empty
& 0x100) == 0);
62 static __inline__
void zy1000_flush_readqueue(void)
64 /* Not used w/hardware fifo */
66 static __inline__
void zy1000_flush_callbackqueue(void)
68 /* Not used w/hardware fifo */
71 extern void waitIdle(void);
72 void zy1000_flush_readqueue(void);
73 void zy1000_flush_callbackqueue(void);
74 void zy1000_jtag_add_callback4(jtag_callback_t callback
, jtag_callback_data_t data0
, jtag_callback_data_t data1
, jtag_callback_data_t data2
, jtag_callback_data_t data3
);
75 void zy1000_jtag_add_callback(jtag_callback1_t callback
, jtag_callback_data_t data0
);
78 static __inline__
void waitQueue(void)
83 static __inline__
void sampleShiftRegister(void)
88 ZY1000_PEEK(ZY1000_JTAG_BASE
+ 0xc, dummy
);
92 static __inline__
void setCurrentState(enum tap_state state
)
97 if (state
== TAP_RESET
)
99 // The FPGA nor we know the current state of the CPU TAP
100 // controller. This will move it to TAP for sure.
102 // 5 should be enough here, 7 is what OpenOCD uses
106 sampleShiftRegister();
107 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x8, (repeat
<< 8) | (a
<< 4) | a
);
112 * Enter state and cause repeat transitions *out* of that state. So if the endState != state, then
113 * the transition from state to endState counts as a transition out of state.
115 static __inline__
void shiftValueInner(const enum tap_state state
, const enum tap_state endState
, int repeat
, uint32_t value
)
121 sampleShiftRegister();
122 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0xc, value
);
125 if ((state
== TAP_DRSHIFT
) && (endState
!= TAP_DRSHIFT
))
128 setCurrentState(state
);
129 for (i
= 0; i
< repeat
; i
++)
133 if ((i
== repeat
-1) && (state
!= endState
))
137 /* shift out value */
139 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, (((value
>> i
)&1) << 1) | tms
);
142 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 0);
144 //ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, TAP_DRSHIFT); // set this state and things break => expected
145 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x20, TAP_DRPAUSE
); // set this and things will work => expected. Not setting this is not sufficient to make things break.
146 setCurrentState(endState
);
149 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x8, (repeat
<< 8) | (a
<< 4) | b
);
153 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x8, (repeat
<< 8) | (a
<< 4) | b
);
156 /* maximum debug version */
157 if ((repeat
> 0) && ((state
== TAP_DRSHIFT
)||(state
== TAP_SI
)))
160 /* sample shift register for every bit. */
161 for (i
= 0; i
< repeat
-1; i
++)
163 sampleShiftRegister();
164 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0xc, value
>> i
);
165 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x8, (1 << 8) | (a
<< 4) | a
);
167 sampleShiftRegister();
168 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0xc, value
>> (repeat
-1));
169 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x8, (1 << 8) | (a
<< 4) | b
);
172 sampleShiftRegister();
173 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x8, (repeat
<< 8) | (a
<< 4) | b
);
175 sampleShiftRegister();
181 static __inline__
void interface_jtag_add_dr_out_core(struct jtag_tap
*target_tap
,
184 const uint32_t *value
,
185 enum tap_state end_state
)
187 enum tap_state pause_state
= TAP_DRSHIFT
;
189 struct jtag_tap
*tap
, *nextTap
;
190 for (tap
= jtag_tap_next_enabled(NULL
); tap
!= NULL
; tap
= nextTap
)
192 nextTap
= jtag_tap_next_enabled(tap
);
195 pause_state
= end_state
;
197 if (tap
== target_tap
)
200 for (j
= 0; j
< (num_fields
-1); j
++)
202 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, num_bits
[j
], value
[j
]);
204 shiftValueInner(TAP_DRSHIFT
, pause_state
, num_bits
[j
], value
[j
]);
207 /* program the scan field to 1 bit length, and ignore it's value */
208 shiftValueInner(TAP_DRSHIFT
, pause_state
, 1, 0);
213 static __inline__
void interface_jtag_add_dr_out(struct jtag_tap
*target_tap
,
216 const uint32_t *value
,
217 enum tap_state end_state
)
220 int singletap
= (jtag_tap_next_enabled(jtag_tap_next_enabled(NULL
)) == NULL
);
221 if ((singletap
) && (num_fields
== 3))
223 /* used by embeddedice_write_reg_inner() */
224 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, num_bits
[0], value
[0]);
225 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, num_bits
[1], value
[1]);
226 shiftValueInner(TAP_DRSHIFT
, end_state
, num_bits
[2], value
[2]);
227 } else if ((singletap
) && (num_fields
== 2))
229 /* used by arm7 code */
230 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, num_bits
[0], value
[0]);
231 shiftValueInner(TAP_DRSHIFT
, end_state
, num_bits
[1], value
[1]);
234 interface_jtag_add_dr_out_core(target_tap
, num_fields
, num_bits
, value
, end_state
);
238 #if BUILD_ZY1000_MASTER
239 #define interface_jtag_add_callback(callback, in) callback(in)
240 #define interface_jtag_add_callback4(callback, in, data1, data2, data3) jtag_set_error(callback(in, data1, data2, data3))
242 #define interface_jtag_add_callback(callback, in) zy1000_jtag_add_callback(callback, in)
243 #define interface_jtag_add_callback4(callback, in, data1, data2, data3) zy1000_jtag_add_callback4(callback, in, data1, data2, data3)
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)