Code Review / openocd.git / blob
? search:
summary | shortlog | log | commit | commitdiff | review | tree
history | raw | HEAD
Extend handle_jtag_n{s,t}rst_delay_command routines:
[openocd.git] / src / jtag / jtag.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2007,2008 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
7 * *
8 * Copyright (C) 2009 SoftPLC Corporation *
9 * http://softplc.com *
10 * dick@softplc.com *
11 * *
12 * This program is free software; you can redistribute it and/or modify *
13 * it under the terms of the GNU General Public License as published by *
14 * the Free Software Foundation; either version 2 of the License, or *
15 * (at your option) any later version. *
16 * *
17 * This program is distributed in the hope that it will be useful, *
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
20 * GNU General Public License for more details. *
21 * *
22 * You should have received a copy of the GNU General Public License *
23 * along with this program; if not, write to the *
24 * Free Software Foundation, Inc., *
25 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
26 ***************************************************************************/
27 #ifdef HAVE_CONFIG_H
28 #include "config.h"
29 #endif
30
31 #include "jtag.h"
32 #include "minidriver.h"
33 #include "interface.h"
34
35 #ifdef HAVE_STRINGS_H
36 #include <strings.h>
37 #endif
38
39
40 /// The number of JTAG queue flushes (for profiling and debugging purposes).
41 static int jtag_flush_queue_count;
42
43 static void jtag_add_scan_check(void (*jtag_add_scan)(int in_num_fields, const scan_field_t *in_fields, tap_state_t state),
44 int in_num_fields, scan_field_t *in_fields, tap_state_t state);
45
46 /* note that this is not marked as static as it must be available from outside jtag.c for those
47 that implement the jtag_xxx() minidriver layer
48 */
49 int jtag_error=ERROR_OK;
50
51 char* jtag_event_strings[] =
52 {
53 "JTAG controller reset (RESET or TRST)"
54 };
55
56 const Jim_Nvp nvp_jtag_tap_event[] = {
57 { .value = JTAG_TAP_EVENT_ENABLE, .name = "tap-enable" },
58 { .value = JTAG_TAP_EVENT_DISABLE, .name = "tap-disable" },
59
60 { .name = NULL, .value = -1 }
61 };
62
63 int jtag_trst = 0;
64 int jtag_srst = 0;
65
66 /**
67 * List all TAPs that have been created.
68 */
69 static jtag_tap_t *__jtag_all_taps = NULL;
70 /**
71 * The number of TAPs in the __jtag_all_taps list, used to track the
72 * assigned chain position to new TAPs
73 */
74 static int jtag_num_taps = 0;
75
76 enum reset_types jtag_reset_config = RESET_NONE;
77 tap_state_t cmd_queue_end_state = TAP_RESET;
78 tap_state_t cmd_queue_cur_state = TAP_RESET;
79
80 int jtag_verify_capture_ir = 1;
81 int jtag_verify = 1;
82
83 /* how long the OpenOCD should wait before attempting JTAG communication after reset lines deasserted (in ms) */
84 static int jtag_nsrst_delay = 0; /* default to no nSRST delay */
85 static int jtag_ntrst_delay = 0; /* default to no nTRST delay */
86
87 /* callbacks to inform high-level handlers about JTAG state changes */
88 jtag_event_callback_t *jtag_event_callbacks;
89
90 /* speed in kHz*/
91 static int speed_khz = 0;
92 /* flag if the kHz speed was defined */
93 static bool hasKHz = false;
94
95 /* jtag interfaces (parport, FTDI-USB, TI-USB, ...)
96 */
97
98 #if BUILD_ECOSBOARD == 1
99 extern jtag_interface_t zy1000_interface;
100 #elif defined(BUILD_MINIDRIVER_DUMMY)
101 extern jtag_interface_t minidummy_interface;
102 #else // standard drivers
103 #if BUILD_PARPORT == 1
104 extern jtag_interface_t parport_interface;
105 #endif
106
107 #if BUILD_DUMMY == 1
108 extern jtag_interface_t dummy_interface;
109 #endif
110
111 #if BUILD_FT2232_FTD2XX == 1
112 extern jtag_interface_t ft2232_interface;
113 #endif
114
115 #if BUILD_FT2232_LIBFTDI == 1
116 extern jtag_interface_t ft2232_interface;
117 #endif
118
119 #if BUILD_AMTJTAGACCEL == 1
120 extern jtag_interface_t amt_jtagaccel_interface;
121 #endif
122
123 #if BUILD_EP93XX == 1
124 extern jtag_interface_t ep93xx_interface;
125 #endif
126
127 #if BUILD_AT91RM9200 == 1
128 extern jtag_interface_t at91rm9200_interface;
129 #endif
130
131 #if BUILD_GW16012 == 1
132 extern jtag_interface_t gw16012_interface;
133 #endif
134
135 #if BUILD_PRESTO_LIBFTDI == 1 || BUILD_PRESTO_FTD2XX == 1
136 extern jtag_interface_t presto_interface;
137 #endif
138
139 #if BUILD_USBPROG == 1
140 extern jtag_interface_t usbprog_interface;
141 #endif
142
143 #if BUILD_JLINK == 1
144 extern jtag_interface_t jlink_interface;
145 #endif
146
147 #if BUILD_VSLLINK == 1
148 extern jtag_interface_t vsllink_interface;
149 #endif
150
151 #if BUILD_RLINK == 1
152 extern jtag_interface_t rlink_interface;
153 #endif
154
155 #if BUILD_ARMJTAGEW == 1
156 extern jtag_interface_t armjtagew_interface;
157 #endif
158 #endif // standard drivers
159
160 /**
161 * The list of built-in JTAG interfaces, containing entries for those
162 * drivers that were enabled by the @c configure script.
163 *
164 * The list should be defined to contain either one minidriver interface
165 * or some number of standard driver interfaces, never both.
166 */
167 jtag_interface_t *jtag_interfaces[] = {
168 #if BUILD_ECOSBOARD == 1
169 &zy1000_interface,
170 #elif defined(BUILD_MINIDRIVER_DUMMY)
171 &minidummy_interface,
172 #else // standard drivers
173 #if BUILD_PARPORT == 1
174 &parport_interface,
175 #endif
176 #if BUILD_DUMMY == 1
177 &dummy_interface,
178 #endif
179 #if BUILD_FT2232_FTD2XX == 1
180 &ft2232_interface,
181 #endif
182 #if BUILD_FT2232_LIBFTDI == 1
183 &ft2232_interface,
184 #endif
185 #if BUILD_AMTJTAGACCEL == 1
186 &amt_jtagaccel_interface,
187 #endif
188 #if BUILD_EP93XX == 1
189 &ep93xx_interface,
190 #endif
191 #if BUILD_AT91RM9200 == 1
192 &at91rm9200_interface,
193 #endif
194 #if BUILD_GW16012 == 1
195 &gw16012_interface,
196 #endif
197 #if BUILD_PRESTO_LIBFTDI == 1 || BUILD_PRESTO_FTD2XX == 1
198 &presto_interface,
199 #endif
200 #if BUILD_USBPROG == 1
201 &usbprog_interface,
202 #endif
203 #if BUILD_JLINK == 1
204 &jlink_interface,
205 #endif
206 #if BUILD_VSLLINK == 1
207 &vsllink_interface,
208 #endif
209 #if BUILD_RLINK == 1
210 &rlink_interface,
211 #endif
212 #if BUILD_ARMJTAGEW == 1
213 &armjtagew_interface,
214 #endif
215 #endif // standard drivers
216 NULL,
217 };
218
219 struct jtag_interface_s *jtag = NULL;
220
221 /* configuration */
222 static jtag_interface_t *jtag_interface = NULL;
223 int jtag_speed = 0;
224
225 /* jtag commands */
226 static int handle_interface_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
227 static int handle_jtag_speed_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
228 static int handle_jtag_khz_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
229 static int handle_jtag_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
230 static int handle_reset_config_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
231 static int handle_jtag_nsrst_delay_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
232 static int handle_jtag_ntrst_delay_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
233
234 static int handle_scan_chain_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
235
236 static int handle_jtag_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
237 static int handle_runtest_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
238 static int handle_irscan_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
239 static int Jim_Command_drscan(Jim_Interp *interp, int argc, Jim_Obj *const *argv);
240 static int Jim_Command_flush_count(Jim_Interp *interp, int argc, Jim_Obj *const *args);
241
242 static int handle_verify_ircapture_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
243 static int handle_verify_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
244 static int handle_tms_sequence_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
245
246 jtag_tap_t *jtag_all_taps(void)
247 {
248 return __jtag_all_taps;
249 };
250
251 int jtag_tap_count(void)
252 {
253 return jtag_num_taps;
254 }
255
256 unsigned jtag_tap_count_enabled(void)
257 {
258 jtag_tap_t *t;
259 unsigned n;
260
261 n = 0;
262 t = jtag_all_taps();
263 while(t){
264 if( t->enabled ){
265 n++;
266 }
267 t = t->next_tap;
268 }
269 return n;
270 }
271
272 /// Append a new TAP to the chain of all taps.
273 static void jtag_tap_add(struct jtag_tap_s *t)
274 {
275 t->abs_chain_position = jtag_num_taps++;
276
277 jtag_tap_t **tap = &__jtag_all_taps;
278 while(*tap != NULL)
279 tap = &(*tap)->next_tap;
280 *tap = t;
281 }
282
283 jtag_tap_t *jtag_tap_by_string( const char *s )
284 {
285 jtag_tap_t *t;
286 char *cp;
287
288 t = jtag_all_taps();
289 /* try name first */
290 while(t){
291 if( 0 == strcmp( t->dotted_name, s ) ){
292 break;
293 } else {
294 t = t->next_tap;
295 }
296 }
297 /* backup plan is by number */
298 if( t == NULL ){
299 /* ok - is "s" a number? */
300 int n;
301 n = strtol( s, &cp, 0 );
302 if( (s != cp) && (*cp == 0) ){
303 /* Then it is... */
304 t = jtag_tap_by_abs_position(n);
305 }
306 }
307 return t;
308 }
309
310 jtag_tap_t * jtag_tap_by_jim_obj( Jim_Interp *interp, Jim_Obj *o )
311 {
312 jtag_tap_t *t;
313 const char *cp;
314
315 cp = Jim_GetString( o, NULL );
316 if(cp == NULL){
317 cp = "(unknown)";
318 t = NULL;
319 } else {
320 t = jtag_tap_by_string( cp );
321 }
322 if( t == NULL ){
323 Jim_SetResult_sprintf(interp,"Tap: %s is unknown", cp );
324 }
325 return t;
326 }
327
328 /* returns a pointer to the n-th device in the scan chain */
329 jtag_tap_t * jtag_tap_by_abs_position( int n )
330 {
331 int orig_n;
332 jtag_tap_t *t;
333
334 orig_n = n;
335 t = jtag_all_taps();
336
337 while( t && (n > 0)) {
338 n--;
339 t = t->next_tap;
340 }
341 return t;
342 }
343
344 const char *jtag_tap_name(const jtag_tap_t *tap)
345 {
346 return (tap == NULL) ? "(unknown)" : tap->dotted_name;
347 }
348
349
350 int jtag_register_event_callback(int (*callback)(enum jtag_event event, void *priv), void *priv)
351 {
352 jtag_event_callback_t **callbacks_p = &jtag_event_callbacks;
353
354 if (callback == NULL)
355 {
356 return ERROR_INVALID_ARGUMENTS;
357 }
358
359 if (*callbacks_p)
360 {
361 while ((*callbacks_p)->next)
362 callbacks_p = &((*callbacks_p)->next);
363 callbacks_p = &((*callbacks_p)->next);
364 }
365
366 (*callbacks_p) = malloc(sizeof(jtag_event_callback_t));
367 (*callbacks_p)->callback = callback;
368 (*callbacks_p)->priv = priv;
369 (*callbacks_p)->next = NULL;
370
371 return ERROR_OK;
372 }
373
374 int jtag_unregister_event_callback(int (*callback)(enum jtag_event event, void *priv))
375 {
376 jtag_event_callback_t **callbacks_p = &jtag_event_callbacks;
377
378 if (callback == NULL)
379 {
380 return ERROR_INVALID_ARGUMENTS;
381 }
382
383 while (*callbacks_p)
384 {
385 jtag_event_callback_t **next = &((*callbacks_p)->next);
386 if ((*callbacks_p)->callback == callback)
387 {
388 free(*callbacks_p);
389 *callbacks_p = *next;
390 }
391 callbacks_p = next;
392 }
393
394 return ERROR_OK;
395 }
396
397 int jtag_call_event_callbacks(enum jtag_event event)
398 {
399 jtag_event_callback_t *callback = jtag_event_callbacks;
400
401 LOG_DEBUG("jtag event: %s", jtag_event_strings[event]);
402
403 while (callback)
404 {
405 callback->callback(event, callback->priv);
406 callback = callback->next;
407 }
408
409 return ERROR_OK;
410 }
411
412 static void jtag_checks(void)
413 {
414 assert(jtag_trst == 0);
415 }
416
417 static void jtag_prelude(tap_state_t state)
418 {
419 jtag_checks();
420
421 assert(state!=TAP_INVALID);
422
423 cmd_queue_cur_state = state;
424 }
425
426 void jtag_alloc_in_value32(scan_field_t *field)
427 {
428 interface_jtag_alloc_in_value32(field);
429 }
430
431 void jtag_add_ir_scan_noverify(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
432 {
433 int retval;
434 jtag_prelude(state);
435
436 retval=interface_jtag_add_ir_scan(in_num_fields, in_fields, state);
437 if (retval!=ERROR_OK)
438 jtag_error=retval;
439
440 }
441
442
443 /**
444 * Generate an IR SCAN with a list of scan fields with one entry for each enabled TAP.
445 *
446 * If the input field list contains an instruction value for a TAP then that is used
447 * otherwise the TAP is set to bypass.
448 *
449 * TAPs for which no fields are passed are marked as bypassed for subsequent DR SCANs.
450 *
451 */
452 void jtag_add_ir_scan(int in_num_fields, scan_field_t *in_fields, tap_state_t state)
453 {
454 if (jtag_verify&&jtag_verify_capture_ir)
455 {
456 /* 8 x 32 bit id's is enough for all invocations */
457
458 for (int j = 0; j < in_num_fields; j++)
459 {
460 /* if we are to run a verification of the ir scan, we need to get the input back.
461 * We may have to allocate space if the caller didn't ask for the input back.
462 */
463 in_fields[j].check_value=in_fields[j].tap->expected;
464 in_fields[j].check_mask=in_fields[j].tap->expected_mask;
465 }
466 jtag_add_scan_check(jtag_add_ir_scan_noverify, in_num_fields, in_fields, state);
467 } else
468 {
469 jtag_add_ir_scan_noverify(in_num_fields, in_fields, state);
470 }
471 }
472
473 /**
474 * Duplicate the scan fields passed into the function into an IR SCAN command
475 *
476 * This function assumes that the caller handles extra fields for bypassed TAPs
477 *
478 */
479 void jtag_add_plain_ir_scan(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
480 {
481 int retval;
482
483 jtag_prelude(state);
484
485 retval=interface_jtag_add_plain_ir_scan(in_num_fields, in_fields, state);
486 if (retval!=ERROR_OK)
487 jtag_error=retval;
488 }
489
490 void jtag_add_callback(jtag_callback1_t f, u8 *in)
491 {
492 interface_jtag_add_callback(f, in);
493 }
494
495 void jtag_add_callback4(jtag_callback_t f, u8 *in,
496 jtag_callback_data_t data1, jtag_callback_data_t data2,
497 jtag_callback_data_t data3)
498 {
499 interface_jtag_add_callback4(f, in, data1, data2, data3);
500 }
501
502 int jtag_check_value_inner(u8 *captured, u8 *in_check_value, u8 *in_check_mask, int num_bits);
503
504 static int jtag_check_value_mask_callback(u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3)
505 {
506 return jtag_check_value_inner(in, (u8 *)data1, (u8 *)data2, (int)data3);
507 }
508
509 static void jtag_add_scan_check(void (*jtag_add_scan)(int in_num_fields, const scan_field_t *in_fields, tap_state_t state),
510 int in_num_fields, scan_field_t *in_fields, tap_state_t state)
511 {
512 for (int i = 0; i < in_num_fields; i++)
513 {
514 struct scan_field_s *field = &in_fields[i];
515 field->allocated = 0;
516 field->modified = 0;
517 if (field->check_value || field->in_value)
518 continue;
519 interface_jtag_add_scan_check_alloc(field);
520 field->modified = 1;
521 }
522
523 jtag_add_scan(in_num_fields, in_fields, state);
524
525 for (int i = 0; i < in_num_fields; i++)
526 {
527 if ((in_fields[i].check_value != NULL) && (in_fields[i].in_value != NULL))
528 {
529 /* this is synchronous for a minidriver */
530 jtag_add_callback4(jtag_check_value_mask_callback, in_fields[i].in_value,
531 (jtag_callback_data_t)in_fields[i].check_value,
532 (jtag_callback_data_t)in_fields[i].check_mask,
533 (jtag_callback_data_t)in_fields[i].num_bits);
534 }
535 if (in_fields[i].allocated)
536 {
537 free(in_fields[i].in_value);
538 }
539 if (in_fields[i].modified)
540 {
541 in_fields[i].in_value = NULL;
542 }
543 }
544 }
545
546 void jtag_add_dr_scan_check(int in_num_fields, scan_field_t *in_fields, tap_state_t state)
547 {
548 if (jtag_verify)
549 {
550 jtag_add_scan_check(jtag_add_dr_scan, in_num_fields, in_fields, state);
551 } else
552 {
553 jtag_add_dr_scan(in_num_fields, in_fields, state);
554 }
555 }
556
557
558 /**
559 * Generate a DR SCAN using the fields passed to the function
560 *
561 * For not bypassed TAPs the function checks in_fields and uses fields specified there.
562 * For bypassed TAPs the function generates a dummy 1bit field.
563 *
564 * The bypass status of TAPs is set by jtag_add_ir_scan().
565 *
566 */
567 void jtag_add_dr_scan(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
568 {
569 int retval;
570
571 jtag_prelude(state);
572
573 retval=interface_jtag_add_dr_scan(in_num_fields, in_fields, state);
574 if (retval!=ERROR_OK)
575 jtag_error=retval;
576 }
577
578
579
580 /**
581 * Duplicate the scan fields passed into the function into a DR SCAN command
582 *
583 * This function assumes that the caller handles extra fields for bypassed TAPs
584 *
585 */
586 void jtag_add_plain_dr_scan(int in_num_fields, const scan_field_t *in_fields, tap_state_t state)
587 {
588 int retval;
589
590 jtag_prelude(state);
591
592 retval=interface_jtag_add_plain_dr_scan(in_num_fields, in_fields, state);
593 if (retval!=ERROR_OK)
594 jtag_error=retval;
595 }
596
597 void jtag_add_dr_out(jtag_tap_t* tap,
598 int num_fields, const int* num_bits, const u32* value,
599 tap_state_t end_state)
600 {
601 assert(end_state != TAP_INVALID);
602
603 cmd_queue_cur_state = end_state;
604
605 interface_jtag_add_dr_out(tap,
606 num_fields, num_bits, value,
607 end_state);
608 }
609
610 void jtag_add_tlr(void)
611 {
612 jtag_prelude(TAP_RESET);
613
614 int retval;
615 retval=interface_jtag_add_tlr();
616 if (retval!=ERROR_OK)
617 jtag_error=retval;
618
619 jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
620 }
621
622 void jtag_add_pathmove(int num_states, const tap_state_t *path)
623 {
624 tap_state_t cur_state = cmd_queue_cur_state;
625 int i;
626 int retval;
627
628 /* the last state has to be a stable state */
629 if (!tap_is_state_stable(path[num_states - 1]))
630 {
631 LOG_ERROR("BUG: TAP path doesn't finish in a stable state");
632 exit(-1);
633 }
634
635 for (i=0; i<num_states; i++)
636 {
637 if (path[i] == TAP_RESET)
638 {
639 LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences");
640 exit(-1);
641 }
642
643 if ( tap_state_transition(cur_state, true) != path[i]
644 && tap_state_transition(cur_state, false) != path[i])
645 {
646 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(cur_state), tap_state_name(path[i]));
647 exit(-1);
648 }
649 cur_state = path[i];
650 }
651
652 jtag_checks();
653
654 retval = interface_jtag_add_pathmove(num_states, path);
655 cmd_queue_cur_state = path[num_states - 1];
656 if (retval!=ERROR_OK)
657 jtag_error=retval;
658 }
659
660 void jtag_add_runtest(int num_cycles, tap_state_t state)
661 {
662 int retval;
663
664 jtag_prelude(state);
665
666 /* executed by sw or hw fifo */
667 retval=interface_jtag_add_runtest(num_cycles, state);
668 if (retval!=ERROR_OK)
669 jtag_error=retval;
670 }
671
672
673 void jtag_add_clocks( int num_cycles )
674 {
675 int retval;
676
677 if( !tap_is_state_stable(cmd_queue_cur_state) )
678 {
679 LOG_ERROR( "jtag_add_clocks() was called with TAP in non-stable state \"%s\"",
680 tap_state_name(cmd_queue_cur_state) );
681 jtag_error = ERROR_JTAG_NOT_STABLE_STATE;
682 return;
683 }
684
685 if( num_cycles > 0 )
686 {
687 jtag_checks();
688
689 retval = interface_jtag_add_clocks(num_cycles);
690 if (retval != ERROR_OK)
691 jtag_error=retval;
692 }
693 }
694
695 void jtag_add_reset(int req_tlr_or_trst, int req_srst)
696 {
697 int trst_with_tlr = 0;
698 int retval;
699
700 /* FIX!!! there are *many* different cases here. A better
701 * approach is needed for legal combinations of transitions...
702 */
703 if ((jtag_reset_config & RESET_HAS_SRST)&&
704 (jtag_reset_config & RESET_HAS_TRST)&&
705 ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0))
706 {
707 if (((req_tlr_or_trst&&!jtag_trst)||
708 (!req_tlr_or_trst&&jtag_trst))&&
709 ((req_srst&&!jtag_srst)||
710 (!req_srst&&jtag_srst)))
711 {
712 /* FIX!!! srst_pulls_trst allows 1,1 => 0,0 transition.... */
713 //LOG_ERROR("BUG: transition of req_tlr_or_trst and req_srst in the same jtag_add_reset() call is undefined");
714 }
715 }
716
717 /* Make sure that jtag_reset_config allows the requested reset */
718 /* if SRST pulls TRST, we can't fulfill srst == 1 with trst == 0 */
719 if (((jtag_reset_config & RESET_SRST_PULLS_TRST) && (req_srst == 1)) && (!req_tlr_or_trst))
720 {
721 LOG_ERROR("BUG: requested reset would assert trst");
722 jtag_error=ERROR_FAIL;
723 return;
724 }
725
726 /* if TRST pulls SRST, we reset with TAP T-L-R */
727 if (((jtag_reset_config & RESET_TRST_PULLS_SRST) && (req_tlr_or_trst)) && (req_srst == 0))
728 {
729 trst_with_tlr = 1;
730 }
731
732 if (req_srst && !(jtag_reset_config & RESET_HAS_SRST))
733 {
734 LOG_ERROR("BUG: requested SRST assertion, but the current configuration doesn't support this");
735 jtag_error=ERROR_FAIL;
736 return;
737 }
738
739 if (req_tlr_or_trst)
740 {
741 if (!trst_with_tlr && (jtag_reset_config & RESET_HAS_TRST))
742 {
743 jtag_trst = 1;
744 } else
745 {
746 trst_with_tlr = 1;
747 }
748 } else
749 {
750 jtag_trst = 0;
751 }
752
753 jtag_srst = req_srst;
754
755 retval = interface_jtag_add_reset(jtag_trst, jtag_srst);
756 if (retval!=ERROR_OK)
757 {
758 jtag_error=retval;
759 return;
760 }
761 jtag_execute_queue();
762
763 if (jtag_srst)
764 {
765 LOG_DEBUG("SRST line asserted");
766 }
767 else
768 {
769 LOG_DEBUG("SRST line released");
770 if (jtag_nsrst_delay)
771 jtag_add_sleep(jtag_nsrst_delay * 1000);
772 }
773
774 if (trst_with_tlr)
775 {
776 LOG_DEBUG("JTAG reset with RESET instead of TRST");
777 jtag_set_end_state(TAP_RESET);
778 jtag_add_tlr();
779 return;
780 }
781
782 if (jtag_trst)
783 {
784 /* we just asserted nTRST, so we're now in Test-Logic-Reset,
785 * and inform possible listeners about this
786 */
787 LOG_DEBUG("TRST line asserted");
788 tap_set_state(TAP_RESET);
789 jtag_call_event_callbacks(JTAG_TRST_ASSERTED);
790 }
791 else
792 {
793 if (jtag_ntrst_delay)
794 jtag_add_sleep(jtag_ntrst_delay * 1000);
795 }
796 }
797
798 tap_state_t jtag_set_end_state(tap_state_t state)
799 {
800 if ((state == TAP_DRSHIFT)||(state == TAP_IRSHIFT))
801 {
802 LOG_ERROR("BUG: TAP_DRSHIFT/IRSHIFT can't be end state. Calling code should use a larger scan field");
803 }
804
805 if (state!=TAP_INVALID)
806 cmd_queue_end_state = state;
807 return cmd_queue_end_state;
808 }
809
810 tap_state_t jtag_get_end_state(void)
811 {
812 return cmd_queue_end_state;
813 }
814
815 void jtag_add_sleep(u32 us)
816 {
817 keep_alive(); /* we might be running on a very slow JTAG clk */
818 int retval=interface_jtag_add_sleep(us);
819 if (retval!=ERROR_OK)
820 jtag_error=retval;
821 return;
822 }
823
824 int jtag_check_value_inner(u8 *captured, u8 *in_check_value, u8 *in_check_mask, int num_bits)
825 {
826 int retval = ERROR_OK;
827
828 int compare_failed = 0;
829
830 if (in_check_mask)
831 compare_failed = buf_cmp_mask(captured, in_check_value, in_check_mask, num_bits);
832 else
833 compare_failed = buf_cmp(captured, in_check_value, num_bits);
834
835 if (compare_failed){
836 /* An error handler could have caught the failing check
837 * only report a problem when there wasn't a handler, or if the handler
838 * acknowledged the error
839 */
840 /*
841 LOG_WARNING("TAP %s:",
842 jtag_tap_name(field->tap));
843 */
844 if (compare_failed)
845 {
846 char *captured_char = buf_to_str(captured, (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits, 16);
847 char *in_check_value_char = buf_to_str(in_check_value, (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits, 16);
848
849 if (in_check_mask)
850 {
851 char *in_check_mask_char;
852 in_check_mask_char = buf_to_str(in_check_mask, (num_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : num_bits, 16);
853 LOG_WARNING("value captured during scan didn't pass the requested check:");
854 LOG_WARNING("captured: 0x%s check_value: 0x%s check_mask: 0x%s",
855 captured_char, in_check_value_char, in_check_mask_char);
856 free(in_check_mask_char);
857 }
858 else
859 {
860 LOG_WARNING("value captured during scan didn't pass the requested check: captured: 0x%s check_value: 0x%s", captured_char, in_check_value_char);
861 }
862
863 free(captured_char);
864 free(in_check_value_char);
865
866 retval = ERROR_JTAG_QUEUE_FAILED;
867 }
868
869 }
870 return retval;
871 }
872
873 void jtag_check_value_mask(scan_field_t *field, u8 *value, u8 *mask)
874 {
875 assert(field->in_value != NULL);
876
877 if (value==NULL)
878 {
879 /* no checking to do */
880 return;
881 }
882
883 jtag_execute_queue_noclear();
884
885 int retval=jtag_check_value_inner(field->in_value, value, mask, field->num_bits);
886 jtag_set_error(retval);
887 }
888
889
890
891 int default_interface_jtag_execute_queue(void)
892 {
893 if (NULL == jtag)
894 {
895 LOG_ERROR("No JTAG interface configured yet. "
896 "Issue 'init' command in startup scripts "
897 "before communicating with targets.");
898 return ERROR_FAIL;
899 }
900
901 return jtag->execute_queue();
902 }
903
904 void jtag_execute_queue_noclear(void)
905 {
906 /* each flush can take as much as 1-2ms on high bandwidth low latency interfaces.
907 * E.g. a JTAG over TCP/IP or USB....
908 */
909 jtag_flush_queue_count++;
910
911 int retval=interface_jtag_execute_queue();
912 /* we keep the first error */
913 if ((jtag_error==ERROR_OK)&&(retval!=ERROR_OK))
914 {
915 jtag_error=retval;
916 }
917 }
918
919 int jtag_get_flush_queue_count(void)
920 {
921 return jtag_flush_queue_count;
922 }
923
924 int jtag_execute_queue(void)
925 {
926 int retval;
927 jtag_execute_queue_noclear();
928 retval=jtag_error;
929 jtag_error=ERROR_OK;
930 return retval;
931 }
932
933 static int jtag_reset_callback(enum jtag_event event, void *priv)
934 {
935 jtag_tap_t *tap = priv;
936
937 LOG_DEBUG("-");
938
939 if (event == JTAG_TRST_ASSERTED)
940 {
941 buf_set_ones(tap->cur_instr, tap->ir_length);
942 tap->bypass = 1;
943 }
944
945 return ERROR_OK;
946 }
947
948 void jtag_sleep(u32 us)
949 {
950 alive_sleep(us/1000);
951 }
952
953 /// maximum number of JTAG devices expected in the chain
954 #define JTAG_MAX_CHAIN_SIZE 20
955
956 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
957 #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
958 #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
959
960 static int jtag_examine_chain_execute(u8 *idcode_buffer, unsigned num_idcode)
961 {
962 scan_field_t field = {
963 .tap = NULL,
964 .num_bits = num_idcode * 32,
965 .out_value = idcode_buffer,
966 .in_value = idcode_buffer,
967 };
968
969 // initialize to the end of chain ID value
970 for (unsigned i = 0; i < JTAG_MAX_CHAIN_SIZE; i++)
971 buf_set_u32(idcode_buffer, i * 32, 32, 0x000000FF);
972
973 jtag_add_plain_dr_scan(1, &field, TAP_RESET);
974 return jtag_execute_queue();
975 }
976
977 static bool jtag_examine_chain_check(u8 *idcodes, unsigned count)
978 {
979 u8 zero_check = 0x0;
980 u8 one_check = 0xff;
981
982 for (unsigned i = 0; i < count * 4; i++)
983 {
984 zero_check |= idcodes[i];
985 one_check &= idcodes[i];
986 }
987
988 /* if there wasn't a single non-zero bit or if all bits were one,
989 * the scan is not valid */
990 if (zero_check == 0x00 || one_check == 0xff)
991 {
992 LOG_ERROR("JTAG communication failure: check connection, "
993 "JTAG interface, target power etc.");
994 return false;
995 }
996 return true;
997 }
998
999 static void jtag_examine_chain_display(enum log_levels level, const char *msg,
1000 const char *name, u32 idcode)
1001 {
1002 log_printf_lf(level, __FILE__, __LINE__, __FUNCTION__,
1003 "JTAG tap: %s %16.16s: 0x%08x "
1004 "(mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
1005 name, msg, idcode,
1006 EXTRACT_MFG(idcode), EXTRACT_PART(idcode), EXTRACT_VER(idcode) );
1007 }
1008
1009 static bool jtag_idcode_is_final(u32 idcode)
1010 {
1011 return idcode == 0x000000FF || idcode == 0xFFFFFFFF;
1012 }
1013
1014 /**
1015 * This helper checks that remaining bits in the examined chain data are
1016 * all as expected, but a single JTAG device requires only 64 bits to be
1017 * read back correctly. This can help identify and diagnose problems
1018 * with the JTAG chain earlier, gives more helpful/explicit error messages.
1019 */
1020 static void jtag_examine_chain_end(u8 *idcodes, unsigned count, unsigned max)
1021 {
1022 bool triggered = false;
1023 for ( ; count < max - 31; count += 32)
1024 {
1025 u32 idcode = buf_get_u32(idcodes, count, 32);
1026 // do not trigger the warning if the data looks good
1027 if (!triggered && jtag_idcode_is_final(idcode))
1028 continue;
1029 LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
1030 count, idcode);
1031 triggered = true;
1032 }
1033 }
1034
1035 static bool jtag_examine_chain_match_tap(const struct jtag_tap_s *tap)
1036 {
1037 if (0 == tap->expected_ids_cnt)
1038 {
1039 /// @todo Enable LOG_INFO to ask for reports about unknown TAP IDs.
1040 #if 0
1041 LOG_INFO("Uknown JTAG TAP ID: 0x%08x", tap->idcode)
1042 LOG_INFO("Please report the chip name and reported ID code to the openocd project");
1043 #endif
1044 return true;
1045 }
1046
1047 /* Loop over the expected identification codes and test for a match */
1048 u8 ii;
1049 for (ii = 0; ii < tap->expected_ids_cnt; ii++)
1050 {
1051 if (tap->idcode == tap->expected_ids[ii])
1052 break;
1053 }
1054
1055 /* If none of the expected ids matched, log an error */
1056 if (ii != tap->expected_ids_cnt)
1057 {
1058 LOG_INFO("JTAG Tap/device matched");
1059 return true;
1060 }
1061 jtag_examine_chain_display(LOG_LVL_ERROR, "got",
1062 tap->dotted_name, tap->idcode);
1063 for (ii = 0; ii < tap->expected_ids_cnt; ii++)
1064 {
1065 char msg[32];
1066 snprintf(msg, sizeof(msg), "expected %hhu of %hhu",
1067 ii + 1, tap->expected_ids_cnt);
1068 jtag_examine_chain_display(LOG_LVL_ERROR, msg,
1069 tap->dotted_name, tap->expected_ids[ii]);
1070 }
1071 return false;
1072 }
1073
1074 /* Try to examine chain layout according to IEEE 1149.1 §12
1075 */
1076 static int jtag_examine_chain(void)
1077 {
1078 u8 idcode_buffer[JTAG_MAX_CHAIN_SIZE * 4];
1079 unsigned device_count = 0;
1080
1081 jtag_examine_chain_execute(idcode_buffer, JTAG_MAX_CHAIN_SIZE);
1082
1083 if (!jtag_examine_chain_check(idcode_buffer, JTAG_MAX_CHAIN_SIZE))
1084 return ERROR_JTAG_INIT_FAILED;
1085
1086 /* point at the 1st tap */
1087 jtag_tap_t *tap = jtag_tap_next_enabled(NULL);
1088 if (tap == NULL)
1089 {
1090 LOG_ERROR("JTAG: No taps enabled?");
1091 return ERROR_JTAG_INIT_FAILED;
1092 }
1093
1094 for (unsigned bit_count = 0; bit_count < (JTAG_MAX_CHAIN_SIZE * 32) - 31;)
1095 {
1096 u32 idcode = buf_get_u32(idcode_buffer, bit_count, 32);
1097 if ((idcode & 1) == 0)
1098 {
1099 /* LSB must not be 0, this indicates a device in bypass */
1100 LOG_WARNING("Tap/Device does not have IDCODE");
1101 idcode = 0;
1102
1103 bit_count += 1;
1104 }
1105 else
1106 {
1107 /*
1108 * End of chain (invalid manufacturer ID) some devices, such
1109 * as AVR will output all 1's instead of TDI input value at
1110 * end of chain.
1111 */
1112 if (jtag_idcode_is_final(idcode))
1113 {
1114 jtag_examine_chain_end(idcode_buffer,
1115 bit_count + 32, JTAG_MAX_CHAIN_SIZE * 32);
1116 break;
1117 }
1118
1119 jtag_examine_chain_display(LOG_LVL_INFO, "tap/device found",
1120 tap ? tap->dotted_name : "(not-named)",
1121 idcode);
1122
1123 bit_count += 32;
1124 }
1125 device_count++;
1126 if (!tap)
1127 continue;
1128
1129 tap->idcode = idcode;
1130
1131 // ensure the TAP ID does matches what was expected
1132 if (!jtag_examine_chain_match_tap(tap))
1133 return ERROR_JTAG_INIT_FAILED;
1134
1135 tap = jtag_tap_next_enabled(tap);
1136 }
1137
1138 /* see if number of discovered devices matches configuration */
1139 if (device_count != jtag_tap_count_enabled())
1140 {
1141 LOG_ERROR("number of discovered devices in JTAG chain (%i) "
1142 "does not match (enabled) configuration (%i), total taps: %d",
1143 device_count, jtag_tap_count_enabled(), jtag_tap_count());
1144 LOG_ERROR("check the config file and ensure proper JTAG communication"
1145 " (connections, speed, ...)");
1146 return ERROR_JTAG_INIT_FAILED;
1147 }
1148
1149 return ERROR_OK;
1150 }
1151
1152 static int jtag_validate_chain(void)
1153 {
1154 jtag_tap_t *tap;
1155 int total_ir_length = 0;
1156 u8 *ir_test = NULL;
1157 scan_field_t field;
1158 int chain_pos = 0;
1159
1160 tap = NULL;
1161 total_ir_length = 0;
1162 for(;;){
1163 tap = jtag_tap_next_enabled(tap);
1164 if( tap == NULL ){
1165 break;
1166 }
1167 total_ir_length += tap->ir_length;
1168 }
1169
1170 total_ir_length += 2;
1171 ir_test = malloc(CEIL(total_ir_length, 8));
1172 buf_set_ones(ir_test, total_ir_length);
1173
1174 field.tap = NULL;
1175 field.num_bits = total_ir_length;
1176 field.out_value = ir_test;
1177 field.in_value = ir_test;
1178
1179
1180 jtag_add_plain_ir_scan(1, &field, TAP_RESET);
1181 jtag_execute_queue();
1182
1183 tap = NULL;
1184 chain_pos = 0;
1185 int val;
1186 for(;;){
1187 tap = jtag_tap_next_enabled(tap);
1188 if( tap == NULL ){
1189 break;
1190 }
1191
1192 val = buf_get_u32(ir_test, chain_pos, 2);
1193 if (val != 0x1)
1194 {
1195 char *cbuf = buf_to_str(ir_test, total_ir_length, 16);
1196 LOG_ERROR("Could not validate JTAG scan chain, IR mismatch, scan returned 0x%s. tap=%s pos=%d expected 0x1 got %0x", cbuf, jtag_tap_name(tap), chain_pos, val);
1197 free(cbuf);
1198 free(ir_test);
1199 return ERROR_JTAG_INIT_FAILED;
1200 }
1201 chain_pos += tap->ir_length;
1202 }
1203
1204 val = buf_get_u32(ir_test, chain_pos, 2);
1205 if (val != 0x3)
1206 {
1207 char *cbuf = buf_to_str(ir_test, total_ir_length, 16);
1208 LOG_ERROR("Could not validate end of JTAG scan chain, IR mismatch, scan returned 0x%s. pos=%d expected 0x3 got %0x", cbuf, chain_pos, val);
1209 free(cbuf);
1210 free(ir_test);
1211 return ERROR_JTAG_INIT_FAILED;
1212 }
1213
1214 free(ir_test);
1215
1216 return ERROR_OK;
1217 }
1218
1219 enum jtag_tap_cfg_param {
1220 JCFG_EVENT
1221 };
1222
1223 static Jim_Nvp nvp_config_opts[] = {
1224 { .name = "-event", .value = JCFG_EVENT },
1225
1226 { .name = NULL, .value = -1 }
1227 };
1228
1229 static int jtag_tap_configure_cmd( Jim_GetOptInfo *goi, jtag_tap_t * tap)
1230 {
1231 Jim_Nvp *n;
1232 Jim_Obj *o;
1233 int e;
1234
1235 /* parse config or cget options */
1236 while (goi->argc > 0) {
1237 Jim_SetEmptyResult (goi->interp);
1238
1239 e = Jim_GetOpt_Nvp(goi, nvp_config_opts, &n);
1240 if (e != JIM_OK) {
1241 Jim_GetOpt_NvpUnknown(goi, nvp_config_opts, 0);
1242 return e;
1243 }
1244
1245 switch (n->value) {
1246 case JCFG_EVENT:
1247 if (goi->argc == 0) {
1248 Jim_WrongNumArgs( goi->interp, goi->argc, goi->argv, "-event ?event-name? ..." );
1249 return JIM_ERR;
1250 }
1251
1252 e = Jim_GetOpt_Nvp( goi, nvp_jtag_tap_event, &n );
1253 if (e != JIM_OK) {
1254 Jim_GetOpt_NvpUnknown(goi, nvp_jtag_tap_event, 1);
1255 return e;
1256 }
1257
1258 if (goi->isconfigure) {
1259 if (goi->argc != 1) {
1260 Jim_WrongNumArgs(goi->interp, goi->argc, goi->argv, "-event ?event-name? ?EVENT-BODY?");
1261 return JIM_ERR;
1262 }
1263 } else {
1264 if (goi->argc != 0) {
1265 Jim_WrongNumArgs(goi->interp, goi->argc, goi->argv, "-event ?event-name?");
1266 return JIM_ERR;
1267 }
1268 }
1269
1270 {
1271 jtag_tap_event_action_t *jteap;
1272
1273 jteap = tap->event_action;
1274 /* replace existing? */
1275 while (jteap) {
1276 if (jteap->event == (enum jtag_tap_event)n->value) {
1277 break;
1278 }
1279 jteap = jteap->next;
1280 }
1281
1282 if (goi->isconfigure) {
1283 if (jteap == NULL) {
1284 /* create new */
1285 jteap = calloc(1, sizeof (*jteap));
1286 }
1287 jteap->event = n->value;
1288 Jim_GetOpt_Obj( goi, &o);
1289 if (jteap->body) {
1290 Jim_DecrRefCount(interp, jteap->body);
1291 }
1292 jteap->body = Jim_DuplicateObj(goi->interp, o);
1293 Jim_IncrRefCount(jteap->body);
1294
1295 /* add to head of event list */
1296 jteap->next = tap->event_action;
1297 tap->event_action = jteap;
1298 Jim_SetEmptyResult(goi->interp);
1299 } else {
1300 /* get */
1301 if (jteap == NULL) {
1302 Jim_SetEmptyResult(goi->interp);
1303 } else {
1304 Jim_SetResult(goi->interp, Jim_DuplicateObj(goi->interp, jteap->body));
1305 }
1306 }
1307 }
1308 /* loop for more */
1309 break;
1310 }
1311 } /* while (goi->argc) */
1312
1313 return JIM_OK;
1314 }
1315
1316
1317 static void jtag_tap_init(jtag_tap_t *tap)
1318 {
1319 assert(0 != tap->ir_length);
1320
1321 tap->expected = malloc(tap->ir_length);
1322 tap->expected_mask = malloc(tap->ir_length);
1323 tap->cur_instr = malloc(tap->ir_length);
1324
1325 buf_set_u32(tap->expected, 0, tap->ir_length, tap->ir_capture_value);
1326 buf_set_u32(tap->expected_mask, 0, tap->ir_length, tap->ir_capture_mask);
1327 buf_set_ones(tap->cur_instr, tap->ir_length);
1328
1329 // place TAP in bypass mode
1330 tap->bypass = 1;
1331 // register the reset callback for the TAP
1332 jtag_register_event_callback(&jtag_reset_callback, tap);
1333
1334 LOG_DEBUG("Created Tap: %s @ abs position %d, "
1335 "irlen %d, capture: 0x%x mask: 0x%x", tap->dotted_name,
1336 tap->abs_chain_position, tap->ir_length,
1337 tap->ir_capture_value, tap->ir_capture_mask);
1338 jtag_tap_add(tap);
1339 }
1340
1341 static void jtag_tap_free(jtag_tap_t *tap)
1342 {
1343 /// @todo is anything missing? no memory leaks please
1344 free((void *)tap->expected_ids);
1345 free((void *)tap->chip);
1346 free((void *)tap->tapname);
1347 free((void *)tap->dotted_name);
1348 free(tap);
1349 }
1350
1351 static int jim_newtap_cmd( Jim_GetOptInfo *goi )
1352 {
1353 jtag_tap_t *pTap;
1354 jim_wide w;
1355 int x;
1356 int e;
1357 int reqbits;
1358 Jim_Nvp *n;
1359 char *cp;
1360 const Jim_Nvp opts[] = {
1361 #define NTAP_OPT_IRLEN 0
1362 { .name = "-irlen" , .value = NTAP_OPT_IRLEN },
1363 #define NTAP_OPT_IRMASK 1
1364 { .name = "-irmask" , .value = NTAP_OPT_IRMASK },
1365 #define NTAP_OPT_IRCAPTURE 2
1366 { .name = "-ircapture" , .value = NTAP_OPT_IRCAPTURE },
1367 #define NTAP_OPT_ENABLED 3
1368 { .name = "-enable" , .value = NTAP_OPT_ENABLED },
1369 #define NTAP_OPT_DISABLED 4
1370 { .name = "-disable" , .value = NTAP_OPT_DISABLED },
1371 #define NTAP_OPT_EXPECTED_ID 5
1372 { .name = "-expected-id" , .value = NTAP_OPT_EXPECTED_ID },
1373 { .name = NULL , .value = -1 },
1374 };
1375
1376 pTap = malloc( sizeof(jtag_tap_t) );
1377 memset( pTap, 0, sizeof(*pTap) );
1378 if( !pTap ){
1379 Jim_SetResult_sprintf( goi->interp, "no memory");
1380 return JIM_ERR;
1381 }
1382 /*
1383 * we expect CHIP + TAP + OPTIONS
1384 * */
1385 if( goi->argc < 3 ){
1386 Jim_SetResult_sprintf(goi->interp, "Missing CHIP TAP OPTIONS ....");
1387 return JIM_ERR;
1388 }
1389 Jim_GetOpt_String( goi, &cp, NULL );
1390 pTap->chip = strdup(cp);
1391
1392 Jim_GetOpt_String( goi, &cp, NULL );
1393 pTap->tapname = strdup(cp);
1394
1395 /* name + dot + name + null */
1396 x = strlen(pTap->chip) + 1 + strlen(pTap->tapname) + 1;
1397 cp = malloc( x );
1398 sprintf( cp, "%s.%s", pTap->chip, pTap->tapname );
1399 pTap->dotted_name = cp;
1400
1401 LOG_DEBUG("Creating New Tap, Chip: %s, Tap: %s, Dotted: %s, %d params",
1402 pTap->chip, pTap->tapname, pTap->dotted_name, goi->argc);
1403
1404 /* default is enabled */
1405 pTap->enabled = 1;
1406
1407 /* deal with options */
1408 #define NTREQ_IRLEN 1
1409 #define NTREQ_IRCAPTURE 2
1410 #define NTREQ_IRMASK 4
1411
1412 /* clear them as we find them */
1413 reqbits = (NTREQ_IRLEN | NTREQ_IRCAPTURE | NTREQ_IRMASK);
1414
1415 while( goi->argc ){
1416 e = Jim_GetOpt_Nvp( goi, opts, &n );
1417 if( e != JIM_OK ){
1418 Jim_GetOpt_NvpUnknown( goi, opts, 0 );
1419 return e;
1420 }
1421 LOG_DEBUG("Processing option: %s", n->name );
1422 switch( n->value ){
1423 case NTAP_OPT_ENABLED:
1424 pTap->enabled = 1;
1425 break;
1426 case NTAP_OPT_DISABLED:
1427 pTap->enabled = 0;
1428 break;
1429 case NTAP_OPT_EXPECTED_ID:
1430 {
1431 u32 *new_expected_ids;
1432
1433 e = Jim_GetOpt_Wide( goi, &w );
1434 if( e != JIM_OK) {
1435 Jim_SetResult_sprintf(goi->interp, "option: %s bad parameter", n->name);
1436 return e;
1437 }
1438
1439 new_expected_ids = malloc(sizeof(u32) * (pTap->expected_ids_cnt + 1));
1440 if (new_expected_ids == NULL) {
1441 Jim_SetResult_sprintf( goi->interp, "no memory");
1442 return JIM_ERR;
1443 }
1444
1445 memcpy(new_expected_ids, pTap->expected_ids, sizeof(u32) * pTap->expected_ids_cnt);
1446
1447 new_expected_ids[pTap->expected_ids_cnt] = w;
1448
1449 free(pTap->expected_ids);
1450 pTap->expected_ids = new_expected_ids;
1451 pTap->expected_ids_cnt++;
1452 break;
1453 }
1454 case NTAP_OPT_IRLEN:
1455 case NTAP_OPT_IRMASK:
1456 case NTAP_OPT_IRCAPTURE:
1457 e = Jim_GetOpt_Wide( goi, &w );
1458 if( e != JIM_OK ){
1459 Jim_SetResult_sprintf( goi->interp, "option: %s bad parameter", n->name );
1460 return e;
1461 }
1462 if( (w < 0) || (w > 0xffff) ){
1463 /* wacky value */
1464 Jim_SetResult_sprintf( goi->interp, "option: %s - wacky value: %d (0x%x)",
1465 n->name, (int)(w), (int)(w));
1466 return JIM_ERR;
1467 }
1468 switch(n->value){
1469 case NTAP_OPT_IRLEN:
1470 pTap->ir_length = w;
1471 reqbits &= (~(NTREQ_IRLEN));
1472 break;
1473 case NTAP_OPT_IRMASK:
1474 pTap->ir_capture_mask = w;
1475 reqbits &= (~(NTREQ_IRMASK));
1476 break;
1477 case NTAP_OPT_IRCAPTURE:
1478 pTap->ir_capture_value = w;
1479 reqbits &= (~(NTREQ_IRCAPTURE));
1480 break;
1481 }
1482 } /* switch(n->value) */
1483 } /* while( goi->argc ) */
1484
1485 /* Did all the required option bits get cleared? */
1486 if (0 == reqbits)
1487 {
1488 jtag_tap_init(pTap);
1489 return ERROR_OK;
1490 }
1491
1492 Jim_SetResult_sprintf(goi->interp,
1493 "newtap: %s missing required parameters",
1494 pTap->dotted_name);
1495 jtag_tap_free(pTap);
1496 return JIM_ERR;
1497 }
1498
1499 static int jim_jtag_command( Jim_Interp *interp, int argc, Jim_Obj *const *argv )
1500 {
1501 Jim_GetOptInfo goi;
1502 int e;
1503 Jim_Nvp *n;
1504 Jim_Obj *o;
1505 struct command_context_s *context;
1506
1507 enum {
1508 JTAG_CMD_INTERFACE,
1509 JTAG_CMD_INIT_RESET,
1510 JTAG_CMD_NEWTAP,
1511 JTAG_CMD_TAPENABLE,
1512 JTAG_CMD_TAPDISABLE,
1513 JTAG_CMD_TAPISENABLED,
1514 JTAG_CMD_CONFIGURE,
1515 JTAG_CMD_CGET
1516 };
1517
1518 const Jim_Nvp jtag_cmds[] = {
1519 { .name = "interface" , .value = JTAG_CMD_INTERFACE },
1520 { .name = "arp_init-reset", .value = JTAG_CMD_INIT_RESET },
1521 { .name = "newtap" , .value = JTAG_CMD_NEWTAP },
1522 { .name = "tapisenabled" , .value = JTAG_CMD_TAPISENABLED },
1523 { .name = "tapenable" , .value = JTAG_CMD_TAPENABLE },
1524 { .name = "tapdisable" , .value = JTAG_CMD_TAPDISABLE },
1525 { .name = "configure" , .value = JTAG_CMD_CONFIGURE },
1526 { .name = "cget" , .value = JTAG_CMD_CGET },
1527
1528 { .name = NULL, .value = -1 },
1529 };
1530
1531 context = Jim_GetAssocData(interp, "context");
1532 /* go past the command */
1533 Jim_GetOpt_Setup( &goi, interp, argc-1, argv+1 );
1534
1535 e = Jim_GetOpt_Nvp( &goi, jtag_cmds, &n );
1536 if( e != JIM_OK ){
1537 Jim_GetOpt_NvpUnknown( &goi, jtag_cmds, 0 );
1538 return e;
1539 }
1540 Jim_SetEmptyResult( goi.interp );
1541 switch( n->value ){
1542 case JTAG_CMD_INTERFACE:
1543 /* return the name of the interface */
1544 /* TCL code might need to know the exact type... */
1545 /* FUTURE: we allow this as a means to "set" the interface. */
1546 if( goi.argc != 0 ){
1547 Jim_WrongNumArgs( goi.interp, 1, goi.argv-1, "(no params)");
1548 return JIM_ERR;
1549 }
1550 Jim_SetResultString( goi.interp, jtag_interface->name, -1 );
1551 return JIM_OK;
1552 case JTAG_CMD_INIT_RESET:
1553 if( goi.argc != 0 ){
1554 Jim_WrongNumArgs( goi.interp, 1, goi.argv-1, "(no params)");
1555 return JIM_ERR;
1556 }
1557 e = jtag_init_reset(context);
1558 if( e != ERROR_OK ){
1559 Jim_SetResult_sprintf( goi.interp, "error: %d", e);
1560 return JIM_ERR;
1561 }
1562 return JIM_OK;
1563 case JTAG_CMD_NEWTAP:
1564 return jim_newtap_cmd( &goi );
1565 break;
1566 case JTAG_CMD_TAPISENABLED:
1567 case JTAG_CMD_TAPENABLE:
1568 case JTAG_CMD_TAPDISABLE:
1569 if( goi.argc != 1 ){
1570 Jim_SetResultString( goi.interp, "Too many parameters",-1 );
1571 return JIM_ERR;
1572 }
1573
1574 {
1575 jtag_tap_t *t;
1576 t = jtag_tap_by_jim_obj( goi.interp, goi.argv[0] );
1577 if( t == NULL ){
1578 return JIM_ERR;
1579 }
1580 switch( n->value ){
1581 case JTAG_CMD_TAPISENABLED:
1582 e = t->enabled;
1583 break;
1584 case JTAG_CMD_TAPENABLE:
1585 jtag_tap_handle_event( t, JTAG_TAP_EVENT_ENABLE);
1586 e = 1;
1587 t->enabled = e;
1588 break;
1589 case JTAG_CMD_TAPDISABLE:
1590 jtag_tap_handle_event( t, JTAG_TAP_EVENT_DISABLE);
1591 e = 0;
1592 t->enabled = e;
1593 break;
1594 }
1595 Jim_SetResult( goi.interp, Jim_NewIntObj( goi.interp, e ) );
1596 return JIM_OK;
1597 }
1598 break;
1599
1600 case JTAG_CMD_CGET:
1601 if( goi.argc < 2 ){
1602 Jim_WrongNumArgs( goi.interp, 0, NULL, "?tap-name? -option ...");
1603 return JIM_ERR;
1604 }
1605
1606 {
1607 jtag_tap_t *t;
1608
1609 Jim_GetOpt_Obj(&goi, &o);
1610 t = jtag_tap_by_jim_obj( goi.interp, o );
1611 if( t == NULL ){
1612 return JIM_ERR;
1613 }
1614
1615 goi.isconfigure = 0;
1616 return jtag_tap_configure_cmd( &goi, t);
1617 }
1618 break;
1619
1620 case JTAG_CMD_CONFIGURE:
1621 if( goi.argc < 3 ){
1622 Jim_WrongNumArgs( goi.interp, 0, NULL, "?tap-name? -option ?VALUE? ...");
1623 return JIM_ERR;
1624 }
1625
1626 {
1627 jtag_tap_t *t;
1628
1629 Jim_GetOpt_Obj(&goi, &o);
1630 t = jtag_tap_by_jim_obj( goi.interp, o );
1631 if( t == NULL ){
1632 return JIM_ERR;
1633 }
1634
1635 goi.isconfigure = 1;
1636 return jtag_tap_configure_cmd( &goi, t);
1637 }
1638 }
1639
1640 return JIM_ERR;
1641 }
1642
1643 int jtag_register_commands(struct command_context_s *cmd_ctx)
1644 {
1645 register_jim( cmd_ctx, "jtag", jim_jtag_command, "perform jtag tap actions");
1646
1647 register_command(cmd_ctx, NULL, "interface", handle_interface_command,
1648 COMMAND_CONFIG, "try to configure interface");
1649 register_command(cmd_ctx, NULL, "jtag_speed", handle_jtag_speed_command,
1650 COMMAND_ANY, "(DEPRECATED) set jtag speed (if supported)");
1651 register_command(cmd_ctx, NULL, "jtag_khz", handle_jtag_khz_command,
1652 COMMAND_ANY, "set maximum jtag speed (if supported); "
1653 "parameter is maximum khz, or 0 for adaptive clocking (RTCK).");
1654 register_command(cmd_ctx, NULL, "jtag_device", handle_jtag_device_command,
1655 COMMAND_CONFIG, "(DEPRECATED) jtag_device <ir_length> <ir_expected> <ir_mask>");
1656 register_command(cmd_ctx, NULL, "reset_config", handle_reset_config_command,
1657 COMMAND_ANY,
1658 "[none/trst_only/srst_only/trst_and_srst] [srst_pulls_trst/trst_pulls_srst] [combined/separate] [trst_push_pull/trst_open_drain] [srst_push_pull/srst_open_drain]");
1659 register_command(cmd_ctx, NULL, "jtag_nsrst_delay", handle_jtag_nsrst_delay_command,
1660 COMMAND_ANY, "jtag_nsrst_delay <ms> - delay after deasserting srst in ms");
1661 register_command(cmd_ctx, NULL, "jtag_ntrst_delay", handle_jtag_ntrst_delay_command,
1662 COMMAND_ANY, "jtag_ntrst_delay <ms> - delay after deasserting trst in ms");
1663
1664 register_command(cmd_ctx, NULL, "scan_chain", handle_scan_chain_command,
1665 COMMAND_EXEC, "print current scan chain configuration");
1666
1667 register_command(cmd_ctx, NULL, "jtag_reset", handle_jtag_reset_command,
1668 COMMAND_EXEC, "toggle reset lines <trst> <srst>");
1669 register_command(cmd_ctx, NULL, "runtest", handle_runtest_command,
1670 COMMAND_EXEC, "move to Run-Test/Idle, and execute <num_cycles>");
1671 register_command(cmd_ctx, NULL, "irscan", handle_irscan_command,
1672 COMMAND_EXEC, "execute IR scan <device> <instr> [dev2] [instr2] ...");
1673 register_jim(cmd_ctx, "drscan", Jim_Command_drscan, "execute DR scan <device> <num_bits> <value> <num_bits1> <value2> ...");
1674 register_jim(cmd_ctx, "flush_count", Jim_Command_flush_count, "returns number of times the JTAG queue has been flushed");
1675
1676 register_command(cmd_ctx, NULL, "verify_ircapture", handle_verify_ircapture_command,
1677 COMMAND_ANY, "verify value captured during Capture-IR <enable|disable>");
1678 register_command(cmd_ctx, NULL, "verify_jtag", handle_verify_jtag_command,
1679 COMMAND_ANY, "verify value capture <enable|disable>");
1680 register_command(cmd_ctx, NULL, "tms_sequence", handle_tms_sequence_command,
1681 COMMAND_ANY, "choose short(default) or long tms_sequence <short|long>");
1682 return ERROR_OK;
1683 }
1684
1685 int jtag_interface_init(struct command_context_s *cmd_ctx)
1686 {
1687 if (jtag)
1688 return ERROR_OK;
1689
1690 if (!jtag_interface)
1691 {
1692 /* nothing was previously specified by "interface" command */
1693 LOG_ERROR("JTAG interface has to be specified, see \"interface\" command");
1694 return ERROR_JTAG_INVALID_INTERFACE;
1695 }
1696 if(hasKHz)
1697 {
1698 jtag_interface->khz(jtag_get_speed_khz(), &jtag_speed);
1699 hasKHz = false;
1700 }
1701
1702 if (jtag_interface->init() != ERROR_OK)
1703 return ERROR_JTAG_INIT_FAILED;
1704
1705 jtag = jtag_interface;
1706 return ERROR_OK;
1707 }
1708
1709 static int jtag_init_inner(struct command_context_s *cmd_ctx)
1710 {
1711 jtag_tap_t *tap;
1712 int retval;
1713
1714 LOG_DEBUG("Init JTAG chain");
1715
1716 tap = jtag_tap_next_enabled(NULL);
1717 if( tap == NULL ){
1718 LOG_ERROR("There are no enabled taps?");
1719 return ERROR_JTAG_INIT_FAILED;
1720 }
1721
1722 jtag_add_tlr();
1723 if ((retval=jtag_execute_queue())!=ERROR_OK)
1724 return retval;
1725
1726 /* examine chain first, as this could discover the real chain layout */
1727 if (jtag_examine_chain() != ERROR_OK)
1728 {
1729 LOG_ERROR("trying to validate configured JTAG chain anyway...");
1730 }
1731
1732 if (jtag_validate_chain() != ERROR_OK)
1733 {
1734 LOG_WARNING("Could not validate JTAG chain, continuing anyway...");
1735 }
1736
1737 return ERROR_OK;
1738 }
1739
1740 int jtag_interface_quit(void)
1741 {
1742 if (!jtag || !jtag->quit)
1743 return ERROR_OK;
1744
1745 // close the JTAG interface
1746 int result = jtag->quit();
1747 if (ERROR_OK != result)
1748 LOG_ERROR("failed: %d", result);
1749
1750 return ERROR_OK;
1751 }
1752
1753
1754 int jtag_init_reset(struct command_context_s *cmd_ctx)
1755 {
1756 int retval;
1757
1758 if ((retval=jtag_interface_init(cmd_ctx)) != ERROR_OK)
1759 return retval;
1760
1761 LOG_DEBUG("Trying to bring the JTAG controller to life by asserting TRST / RESET");
1762
1763 /* Reset can happen after a power cycle.
1764 *
1765 * Ideally we would only assert TRST or run RESET before the target reset.
1766 *
1767 * However w/srst_pulls_trst, trst is asserted together with the target
1768 * reset whether we want it or not.
1769 *
1770 * NB! Some targets have JTAG circuitry disabled until a
1771 * trst & srst has been asserted.
1772 *
1773 * NB! here we assume nsrst/ntrst delay are sufficient!
1774 *
1775 * NB! order matters!!!! srst *can* disconnect JTAG circuitry
1776 *
1777 */
1778 jtag_add_reset(1, 0); /* RESET or TRST */
1779 if (jtag_reset_config & RESET_HAS_SRST)
1780 {
1781 jtag_add_reset(1, 1);
1782 if ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)
1783 jtag_add_reset(0, 1);
1784 }
1785 jtag_add_reset(0, 0);
1786 if ((retval = jtag_execute_queue()) != ERROR_OK)
1787 return retval;
1788
1789 /* Check that we can communication on the JTAG chain + eventually we want to
1790 * be able to perform enumeration only after OpenOCD has started
1791 * telnet and GDB server
1792 *
1793 * That would allow users to more easily perform any magic they need to before
1794 * reset happens.
1795 */
1796 return jtag_init_inner(cmd_ctx);
1797 }
1798
1799 int jtag_init(struct command_context_s *cmd_ctx)
1800 {
1801 int retval;
1802 if ((retval=jtag_interface_init(cmd_ctx)) != ERROR_OK)
1803 return retval;
1804 if (jtag_init_inner(cmd_ctx)==ERROR_OK)
1805 {
1806 return ERROR_OK;
1807 }
1808 return jtag_init_reset(cmd_ctx);
1809 }
1810
1811 void jtag_set_speed_khz(unsigned khz)
1812 {
1813 speed_khz = khz;
1814 }
1815 unsigned jtag_get_speed_khz(void)
1816 {
1817 return speed_khz;
1818 }
1819
1820 static int default_khz(int khz, int *jtag_speed)
1821 {
1822 LOG_ERROR("Translation from khz to jtag_speed not implemented");
1823 return ERROR_FAIL;
1824 }
1825
1826 static int default_speed_div(int speed, int *khz)
1827 {
1828 LOG_ERROR("Translation from jtag_speed to khz not implemented");
1829 return ERROR_FAIL;
1830 }
1831
1832 static int default_power_dropout(int *dropout)
1833 {
1834 *dropout=0; /* by default we can't detect power dropout */
1835 return ERROR_OK;
1836 }
1837
1838 static int default_srst_asserted(int *srst_asserted)
1839 {
1840 *srst_asserted=0; /* by default we can't detect srst asserted */
1841 return ERROR_OK;
1842 }
1843
1844 static int handle_interface_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
1845 {
1846 int i;
1847 int retval;
1848
1849 /* check whether the interface is already configured */
1850 if (jtag_interface)
1851 {
1852 LOG_WARNING("Interface already configured, ignoring");
1853 return ERROR_OK;
1854 }
1855
1856 /* interface name is a mandatory argument */
1857 if (argc < 1 || args[0][0] == '\0')
1858 {
1859 return ERROR_COMMAND_SYNTAX_ERROR;
1860 }
1861
1862 for (i=0; jtag_interfaces[i]; i++)
1863 {
1864 if (strcmp(args[0], jtag_interfaces[i]->name) == 0)
1865 {
1866 if ((retval = jtag_interfaces[i]->register_commands(cmd_ctx)) != ERROR_OK)
1867 {
1868 return retval;
1869 }
1870
1871 jtag_interface = jtag_interfaces[i];
1872
1873 if (jtag_interface->khz == NULL)
1874 {
1875 jtag_interface->khz = default_khz;
1876 }
1877 if (jtag_interface->speed_div == NULL)
1878 {
1879 jtag_interface->speed_div = default_speed_div;
1880 }
1881 if (jtag_interface->power_dropout == NULL)
1882 {
1883 jtag_interface->power_dropout = default_power_dropout;
1884 }
1885 if (jtag_interface->srst_asserted == NULL)
1886 {
1887 jtag_interface->srst_asserted = default_srst_asserted;
1888 }
1889
1890 return ERROR_OK;
1891 }
1892 }
1893
1894 /* no valid interface was found (i.e. the configuration option,
1895 * didn't match one of the compiled-in interfaces
1896 */
1897 LOG_ERROR("No valid jtag interface found (%s)", args[0]);
1898 LOG_ERROR("compiled-in jtag interfaces:");
1899 for (i = 0; jtag_interfaces[i]; i++)
1900 {
1901 LOG_ERROR("%i: %s", i, jtag_interfaces[i]->name);
1902 }
1903
1904 return ERROR_JTAG_INVALID_INTERFACE;
1905 }
1906
1907 static int handle_jtag_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
1908 {
1909 int e;
1910 char buf[1024];
1911 Jim_Obj *newargs[ 10 ];
1912 /*
1913 * CONVERT SYNTAX
1914 * argv[-1] = command
1915 * argv[ 0] = ir length
1916 * argv[ 1] = ir capture
1917 * argv[ 2] = ir mask
1918 * argv[ 3] = not actually used by anything but in the docs
1919 */
1920
1921 if( argc < 4 ){
1922 command_print( cmd_ctx, "OLD DEPRECATED SYNTAX: Please use the NEW syntax");
1923 return ERROR_OK;
1924 }
1925 command_print( cmd_ctx, "OLD SYNTAX: DEPRECATED - translating to new syntax");
1926 command_print( cmd_ctx, "jtag newtap CHIP TAP -irlen %s -ircapture %s -irvalue %s",
1927 args[0],
1928 args[1],
1929 args[2] );
1930 command_print( cmd_ctx, "Example: STM32 has 2 taps, the cortexM3(len4) + boundaryscan(len5)");
1931 command_print( cmd_ctx, "jtag newtap stm32 cortexm3 ....., thus creating the tap: \"stm32.cortexm3\"");
1932 command_print( cmd_ctx, "jtag newtap stm32 boundary ....., and the tap: \"stm32.boundary\"");
1933 command_print( cmd_ctx, "And then refer to the taps by the dotted name.");
1934
1935 newargs[0] = Jim_NewStringObj( interp, "jtag", -1 );
1936 newargs[1] = Jim_NewStringObj( interp, "newtap", -1 );
1937 sprintf( buf, "chip%d", jtag_tap_count() );
1938 newargs[2] = Jim_NewStringObj( interp, buf, -1 );
1939 sprintf( buf, "tap%d", jtag_tap_count() );
1940 newargs[3] = Jim_NewStringObj( interp, buf, -1 );
1941 newargs[4] = Jim_NewStringObj( interp, "-irlen", -1 );
1942 newargs[5] = Jim_NewStringObj( interp, args[0], -1 );
1943 newargs[6] = Jim_NewStringObj( interp, "-ircapture", -1 );
1944 newargs[7] = Jim_NewStringObj( interp, args[1], -1 );
1945 newargs[8] = Jim_NewStringObj( interp, "-irmask", -1 );
1946 newargs[9] = Jim_NewStringObj( interp, args[2], -1 );
1947
1948 command_print( cmd_ctx, "NEW COMMAND:");
1949 sprintf( buf, "%s %s %s %s %s %s %s %s %s %s",
1950 Jim_GetString( newargs[0], NULL ),
1951 Jim_GetString( newargs[1], NULL ),
1952 Jim_GetString( newargs[2], NULL ),
1953 Jim_GetString( newargs[3], NULL ),
1954 Jim_GetString( newargs[4], NULL ),
1955 Jim_GetString( newargs[5], NULL ),
1956 Jim_GetString( newargs[6], NULL ),
1957 Jim_GetString( newargs[7], NULL ),
1958 Jim_GetString( newargs[8], NULL ),
1959 Jim_GetString( newargs[9], NULL ) );
1960
1961 e = jim_jtag_command( interp, 10, newargs );
1962 if( e != JIM_OK ){
1963 command_print( cmd_ctx, "%s", Jim_GetString( Jim_GetResult(interp), NULL ) );
1964 }
1965 return e;
1966 }
1967
1968 static int handle_scan_chain_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
1969 {
1970 jtag_tap_t *tap;
1971
1972 tap = jtag_all_taps();
1973 command_print(cmd_ctx, " TapName | Enabled | IdCode Expected IrLen IrCap IrMask Instr ");
1974 command_print(cmd_ctx, "---|--------------------|---------|------------|------------|------|------|------|---------");
1975
1976 while( tap ){
1977 u32 expected, expected_mask, cur_instr, ii;
1978 expected = buf_get_u32(tap->expected, 0, tap->ir_length);
1979 expected_mask = buf_get_u32(tap->expected_mask, 0, tap->ir_length);
1980 cur_instr = buf_get_u32(tap->cur_instr, 0, tap->ir_length);
1981
1982 command_print(cmd_ctx,
1983 "%2d | %-18s | %c | 0x%08x | 0x%08x | 0x%02x | 0x%02x | 0x%02x | 0x%02x",
1984 tap->abs_chain_position,
1985 tap->dotted_name,
1986 tap->enabled ? 'Y' : 'n',
1987 tap->idcode,
1988 (tap->expected_ids_cnt > 0 ? tap->expected_ids[0] : 0),
1989 tap->ir_length,
1990 expected,
1991 expected_mask,
1992 cur_instr);
1993
1994 for (ii = 1; ii < tap->expected_ids_cnt; ii++) {
1995 command_print(cmd_ctx, " | | | | 0x%08x | | | | ",
1996 tap->expected_ids[ii]);
1997 }
1998
1999 tap = tap->next_tap;
2000 }
2001
2002 return ERROR_OK;
2003 }
2004
2005 static int handle_reset_config_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2006 {
2007 int new_cfg = 0;
2008 int mask = 0;
2009
2010 if (argc < 1)
2011 return ERROR_COMMAND_SYNTAX_ERROR;
2012
2013 /* Original versions cared about the order of these tokens:
2014 * reset_config signals [combination [trst_type [srst_type]]]
2015 * They also clobbered the previous configuration even on error.
2016 *
2017 * Here we don't care about the order, and only change values
2018 * which have been explicitly specified.
2019 */
2020 for (; argc; argc--, args++) {
2021 int tmp = 0;
2022 int m;
2023
2024 /* signals */
2025 m = RESET_HAS_TRST | RESET_HAS_SRST;
2026 if (strcmp(*args, "none") == 0)
2027 tmp = RESET_NONE;
2028 else if (strcmp(*args, "trst_only") == 0)
2029 tmp = RESET_HAS_TRST;
2030 else if (strcmp(*args, "srst_only") == 0)
2031 tmp = RESET_HAS_SRST;
2032 else if (strcmp(*args, "trst_and_srst") == 0)
2033 tmp = RESET_HAS_TRST | RESET_HAS_SRST;
2034 else
2035 m = 0;
2036 if (mask & m) {
2037 LOG_ERROR("extra reset_config %s spec (%s)",
2038 "signal", *args);
2039 return ERROR_INVALID_ARGUMENTS;
2040 }
2041 if (m)
2042 goto next;
2043
2044 /* combination (options for broken wiring) */
2045 m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
2046 if (strcmp(*args, "separate") == 0)
2047 /* separate reset lines - default */;
2048 else if (strcmp(*args, "srst_pulls_trst") == 0)
2049 tmp |= RESET_SRST_PULLS_TRST;
2050 else if (strcmp(*args, "trst_pulls_srst") == 0)
2051 tmp |= RESET_TRST_PULLS_SRST;
2052 else if (strcmp(*args, "combined") == 0)
2053 tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
2054 else
2055 m = 0;
2056 if (mask & m) {
2057 LOG_ERROR("extra reset_config %s spec (%s)",
2058 "combination", *args);
2059 return ERROR_INVALID_ARGUMENTS;
2060 }
2061 if (m)
2062 goto next;
2063
2064 /* trst_type (NOP without HAS_TRST) */
2065 m = RESET_TRST_OPEN_DRAIN;
2066 if (strcmp(*args, "trst_open_drain") == 0)
2067 tmp |= RESET_TRST_OPEN_DRAIN;
2068 else if (strcmp(*args, "trst_push_pull") == 0)
2069 /* push/pull from adapter - default */;
2070 else
2071 m = 0;
2072 if (mask & m) {
2073 LOG_ERROR("extra reset_config %s spec (%s)",
2074 "trst_type", *args);
2075 return ERROR_INVALID_ARGUMENTS;
2076 }
2077 if (m)
2078 goto next;
2079
2080 /* srst_type (NOP without HAS_SRST) */
2081 m |= RESET_SRST_PUSH_PULL;
2082 if (strcmp(*args, "srst_push_pull") == 0)
2083 tmp |= RESET_SRST_PUSH_PULL;
2084 else if (strcmp(*args, "srst_open_drain") == 0)
2085 /* open drain from adapter - default */;
2086 else
2087 m = 0;
2088 if (mask & m) {
2089 LOG_ERROR("extra reset_config %s spec (%s)",
2090 "srst_type", *args);
2091 return ERROR_INVALID_ARGUMENTS;
2092 }
2093 if (m)
2094 goto next;
2095
2096 /* caller provided nonsense; fail */
2097 LOG_ERROR("unknown reset_config flag (%s)", *args);
2098 return ERROR_INVALID_ARGUMENTS;
2099
2100 next:
2101 /* Remember the bits which were specified (mask)
2102 * and their new values (new_cfg).
2103 */
2104 mask |= m;
2105 new_cfg |= tmp;
2106 }
2107
2108 /* clear previous values of those bits, save new values */
2109 jtag_reset_config &= ~mask;
2110 jtag_reset_config |= new_cfg;
2111
2112 return ERROR_OK;
2113 }
2114
2115 static int handle_jtag_nsrst_delay_command(struct command_context_s *cmd_ctx,
2116 char *cmd, char **args, int argc)
2117 {
2118 if (argc > 1)
2119 return ERROR_COMMAND_SYNTAX_ERROR;
2120 if (argc == 1)
2121 jtag_set_nsrst_delay(strtoul(args[0], NULL, 0));
2122 command_print(cmd_ctx, "jtag_nsrst_delay: %u", jtag_get_nsrst_delay());
2123 return ERROR_OK;
2124 }
2125
2126 static int handle_jtag_ntrst_delay_command(struct command_context_s *cmd_ctx,
2127 char *cmd, char **args, int argc)
2128 {
2129 if (argc > 1)
2130 return ERROR_COMMAND_SYNTAX_ERROR;
2131 if (argc == 1)
2132 jtag_set_ntrst_delay(strtoul(args[0], NULL, 0));
2133 command_print(cmd_ctx, "jtag_ntrst_delay: %u", jtag_get_ntrst_delay());
2134 return ERROR_OK;
2135 }
2136
2137 static int handle_jtag_speed_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2138 {
2139 int retval = ERROR_OK;
2140
2141 if (argc > 1)
2142 return ERROR_COMMAND_SYNTAX_ERROR;
2143 if (argc == 1)
2144 {
2145 LOG_DEBUG("handle jtag speed");
2146
2147 int cur_speed = 0;
2148 cur_speed = jtag_speed = strtoul(args[0], NULL, 0);
2149
2150 /* this command can be called during CONFIG,
2151 * in which case jtag isn't initialized */
2152 if (jtag)
2153 retval = jtag->speed(cur_speed);
2154 }
2155 command_print(cmd_ctx, "jtag_speed: %d", jtag_speed);
2156
2157 return retval;
2158 }
2159
2160 static int handle_jtag_khz_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2161 {
2162 if (argc > 1)
2163 return ERROR_COMMAND_SYNTAX_ERROR;
2164
2165 int retval = ERROR_OK;
2166 int cur_speed = 0;
2167 if (argc == 1)
2168 {
2169 LOG_DEBUG("handle jtag khz");
2170
2171 jtag_set_speed_khz(strtoul(args[0], NULL, 0));
2172 if (jtag != NULL)
2173 {
2174 LOG_DEBUG("have interface set up");
2175 int speed_div1;
2176 retval = jtag->khz(jtag_get_speed_khz(), &speed_div1);
2177 if (ERROR_OK != retval)
2178 {
2179 jtag_set_speed_khz(0);
2180 return retval;
2181 }
2182 cur_speed = jtag_speed = speed_div1;
2183
2184 retval = jtag->speed(cur_speed);
2185 }
2186 else
2187 hasKHz = true;
2188 }
2189
2190 cur_speed = jtag_get_speed_khz();
2191 if (jtag != NULL)
2192 {
2193 retval = jtag->speed_div(jtag_speed, &cur_speed);
2194 if (ERROR_OK != retval)
2195 return retval;
2196 }
2197
2198 if (cur_speed)
2199 command_print(cmd_ctx, "%d kHz", cur_speed);
2200 else
2201 command_print(cmd_ctx, "RCLK - adaptive");
2202 return retval;
2203
2204 }
2205
2206 static int handle_jtag_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2207 {
2208 int trst = -1;
2209 int srst = -1;
2210
2211 if (argc < 2)
2212 {
2213 return ERROR_COMMAND_SYNTAX_ERROR;
2214 }
2215
2216 if (args[0][0] == '1')
2217 trst = 1;
2218 else if (args[0][0] == '0')
2219 trst = 0;
2220 else
2221 {
2222 return ERROR_COMMAND_SYNTAX_ERROR;
2223 }
2224
2225 if (args[1][0] == '1')
2226 srst = 1;
2227 else if (args[1][0] == '0')
2228 srst = 0;
2229 else
2230 {
2231 return ERROR_COMMAND_SYNTAX_ERROR;
2232 }
2233
2234 if (jtag_interface_init(cmd_ctx) != ERROR_OK)
2235 return ERROR_JTAG_INIT_FAILED;
2236
2237 jtag_add_reset(trst, srst);
2238 jtag_execute_queue();
2239
2240 return ERROR_OK;
2241 }
2242
2243 static int handle_runtest_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2244 {
2245 if (argc < 1)
2246 {
2247 return ERROR_COMMAND_SYNTAX_ERROR;
2248 }
2249
2250 jtag_add_runtest(strtol(args[0], NULL, 0), jtag_get_end_state());
2251 jtag_execute_queue();
2252
2253 return ERROR_OK;
2254
2255 }
2256
2257 /*
2258 * For "irscan" or "drscan" commands, the "end" (really, "next") state
2259 * should be stable ... and *NOT* a shift state, otherwise free-running
2260 * jtag clocks could change the values latched by the update state.
2261 */
2262 static bool scan_is_safe(tap_state_t state)
2263 {
2264 switch (state)
2265 {
2266 case TAP_RESET:
2267 case TAP_IDLE:
2268 case TAP_DRPAUSE:
2269 case TAP_IRPAUSE:
2270 return true;
2271 default:
2272 return false;
2273 }
2274 }
2275
2276
2277 static int handle_irscan_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2278 {
2279 int i;
2280 scan_field_t *fields;
2281 jtag_tap_t *tap;
2282 tap_state_t endstate;
2283
2284 if ((argc < 2) || (argc % 2))
2285 {
2286 return ERROR_COMMAND_SYNTAX_ERROR;
2287 }
2288
2289 /* optional "-endstate" "statename" at the end of the arguments,
2290 * so that e.g. IRPAUSE can let us load the data register before
2291 * entering RUN/IDLE to execute the instruction we load here.
2292 */
2293 endstate = TAP_IDLE;
2294
2295 if( argc >= 4 ){
2296 /* have at least one pair of numbers. */
2297 /* is last pair the magic text? */
2298 if( 0 == strcmp( "-endstate", args[ argc - 2 ] ) ){
2299 const char *cpA;
2300 const char *cpS;
2301 cpA = args[ argc-1 ];
2302 for( endstate = 0 ; endstate < TAP_NUM_STATES ; endstate++ ){
2303 cpS = tap_state_name( endstate );
2304 if( 0 == strcmp( cpA, cpS ) ){
2305 break;
2306 }
2307 }
2308 if( endstate >= TAP_NUM_STATES ){
2309 return ERROR_COMMAND_SYNTAX_ERROR;
2310 } else {
2311 if (!scan_is_safe(endstate))
2312 LOG_WARNING("irscan with unsafe "
2313 "endstate \"%s\"", cpA);
2314 /* found - remove the last 2 args */
2315 argc -= 2;
2316 }
2317 }
2318 }
2319
2320 int num_fields = argc / 2;
2321
2322 fields = malloc(sizeof(scan_field_t) * num_fields);
2323
2324 for (i = 0; i < num_fields; i++)
2325 {
2326 tap = jtag_tap_by_string( args[i*2] );
2327 if (tap==NULL)
2328 {
2329 command_print( cmd_ctx, "Tap: %s unknown", args[i*2] );
2330 return ERROR_FAIL;
2331 }
2332 int field_size = tap->ir_length;
2333 fields[i].tap = tap;
2334 fields[i].num_bits = field_size;
2335 fields[i].out_value = malloc(CEIL(field_size, 8));
2336 buf_set_u32(fields[i].out_value, 0, field_size, strtoul(args[i*2+1], NULL, 0));
2337 fields[i].in_value = NULL;
2338 }
2339
2340 /* did we have an endstate? */
2341 jtag_add_ir_scan(num_fields, fields, endstate);
2342
2343 int retval=jtag_execute_queue();
2344
2345 for (i = 0; i < num_fields; i++)
2346 free(fields[i].out_value);
2347
2348 free (fields);
2349
2350 return retval;
2351 }
2352
2353 static int Jim_Command_drscan(Jim_Interp *interp, int argc, Jim_Obj *const *args)
2354 {
2355 int retval;
2356 scan_field_t *fields;
2357 int num_fields;
2358 int field_count = 0;
2359 int i, e;
2360 jtag_tap_t *tap;
2361 tap_state_t endstate;
2362
2363 /* args[1] = device
2364 * args[2] = num_bits
2365 * args[3] = hex string
2366 * ... repeat num bits and hex string ...
2367 *
2368 * .. optionally:
2369 * args[N-2] = "-endstate"
2370 * args[N-1] = statename
2371 */
2372 if ((argc < 4) || ((argc % 2)!=0))
2373 {
2374 Jim_WrongNumArgs(interp, 1, args, "wrong arguments");
2375 return JIM_ERR;
2376 }
2377
2378 endstate = TAP_IDLE;
2379
2380 /* validate arguments as numbers */
2381 e = JIM_OK;
2382 for (i = 2; i < argc; i+=2)
2383 {
2384 long bits;
2385 const char *cp;
2386
2387 e = Jim_GetLong(interp, args[i], &bits);
2388 /* If valid - try next arg */
2389 if( e == JIM_OK ){
2390 continue;
2391 }
2392
2393 /* Not valid.. are we at the end? */
2394 if ( ((i+2) != argc) ){
2395 /* nope, then error */
2396 return e;
2397 }
2398
2399 /* it could be: "-endstate FOO"
2400 * e.g. DRPAUSE so we can issue more instructions
2401 * before entering RUN/IDLE and executing them.
2402 */
2403
2404 /* get arg as a string. */
2405 cp = Jim_GetString( args[i], NULL );
2406 /* is it the magic? */
2407 if( 0 == strcmp( "-endstate", cp ) ){
2408 /* is the statename valid? */
2409 cp = Jim_GetString( args[i+1], NULL );
2410
2411 /* see if it is a valid state name */
2412 endstate = tap_state_by_name(cp);
2413 if( endstate < 0 ){
2414 /* update the error message */
2415 Jim_SetResult_sprintf(interp,"endstate: %s invalid", cp );
2416 } else {
2417 if (!scan_is_safe(endstate))
2418 LOG_WARNING("drscan with unsafe "
2419 "endstate \"%s\"", cp);
2420
2421 /* valid - so clear the error */
2422 e = JIM_OK;
2423 /* and remove the last 2 args */
2424 argc -= 2;
2425 }
2426 }
2427
2428 /* Still an error? */
2429 if( e != JIM_OK ){
2430 return e; /* too bad */
2431 }
2432 } /* validate args */
2433
2434 tap = jtag_tap_by_jim_obj( interp, args[1] );
2435 if( tap == NULL ){
2436 return JIM_ERR;
2437 }
2438
2439 num_fields=(argc-2)/2;
2440 fields = malloc(sizeof(scan_field_t) * num_fields);
2441 for (i = 2; i < argc; i+=2)
2442 {
2443 long bits;
2444 int len;
2445 const char *str;
2446
2447 Jim_GetLong(interp, args[i], &bits);
2448 str = Jim_GetString(args[i+1], &len);
2449
2450 fields[field_count].tap = tap;
2451 fields[field_count].num_bits = bits;
2452 fields[field_count].out_value = malloc(CEIL(bits, 8));
2453 str_to_buf(str, len, fields[field_count].out_value, bits, 0);
2454 fields[field_count].in_value = fields[field_count].out_value;
2455 field_count++;
2456 }
2457
2458 jtag_add_dr_scan(num_fields, fields, endstate);
2459
2460 retval = jtag_execute_queue();
2461 if (retval != ERROR_OK)
2462 {
2463 Jim_SetResultString(interp, "drscan: jtag execute failed",-1);
2464 return JIM_ERR;
2465 }
2466
2467 field_count=0;
2468 Jim_Obj *list = Jim_NewListObj(interp, NULL, 0);
2469 for (i = 2; i < argc; i+=2)
2470 {
2471 long bits;
2472 char *str;
2473
2474 Jim_GetLong(interp, args[i], &bits);
2475 str = buf_to_str(fields[field_count].in_value, bits, 16);
2476 free(fields[field_count].out_value);
2477
2478 Jim_ListAppendElement(interp, list, Jim_NewStringObj(interp, str, strlen(str)));
2479 free(str);
2480 field_count++;
2481 }
2482
2483 Jim_SetResult(interp, list);
2484
2485 free(fields);
2486
2487 return JIM_OK;
2488 }
2489
2490
2491 static int Jim_Command_flush_count(Jim_Interp *interp, int argc, Jim_Obj *const *args)
2492 {
2493 Jim_SetResult(interp, Jim_NewIntObj(interp, jtag_get_flush_queue_count()));
2494
2495 return JIM_OK;
2496 }
2497
2498
2499 static int handle_verify_ircapture_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2500 {
2501 if (argc == 1)
2502 {
2503 if (strcmp(args[0], "enable") == 0)
2504 {
2505 jtag_verify_capture_ir = 1;
2506 }
2507 else if (strcmp(args[0], "disable") == 0)
2508 {
2509 jtag_verify_capture_ir = 0;
2510 } else
2511 {
2512 return ERROR_COMMAND_SYNTAX_ERROR;
2513 }
2514 } else if (argc != 0)
2515 {
2516 return ERROR_COMMAND_SYNTAX_ERROR;
2517 }
2518
2519 command_print(cmd_ctx, "verify Capture-IR is %s", (jtag_verify_capture_ir) ? "enabled": "disabled");
2520
2521 return ERROR_OK;
2522 }
2523
2524 void jtag_set_verify(bool enable)
2525 {
2526 jtag_verify = enable;
2527 }
2528
2529 bool jtag_will_verify()
2530 {
2531 return jtag_verify;
2532 }
2533
2534 static int handle_verify_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2535 {
2536 if (argc > 1)
2537 return ERROR_COMMAND_SYNTAX_ERROR;
2538
2539 if (argc == 1)
2540 {
2541 if (strcmp(args[0], "enable") == 0)
2542 jtag_set_verify(true);
2543 else if (strcmp(args[0], "disable") == 0)
2544 jtag_set_verify(false);
2545 else
2546 return ERROR_COMMAND_SYNTAX_ERROR;
2547 }
2548
2549 const char *status = jtag_will_verify() ? "enabled": "disabled";
2550 command_print(cmd_ctx, "verify jtag capture is %s", status);
2551
2552 return ERROR_OK;
2553 }
2554
2555
2556 int jtag_power_dropout(int *dropout)
2557 {
2558 return jtag->power_dropout(dropout);
2559 }
2560
2561 int jtag_srst_asserted(int *srst_asserted)
2562 {
2563 return jtag->srst_asserted(srst_asserted);
2564 }
2565
2566 void jtag_tap_handle_event( jtag_tap_t * tap, enum jtag_tap_event e)
2567 {
2568 jtag_tap_event_action_t * jteap;
2569 int done;
2570
2571 jteap = tap->event_action;
2572
2573 done = 0;
2574 while (jteap) {
2575 if (jteap->event == e) {
2576 done = 1;
2577 LOG_DEBUG( "JTAG tap: %s event: %d (%s) action: %s\n",
2578 tap->dotted_name,
2579 e,
2580 Jim_Nvp_value2name_simple(nvp_jtag_tap_event, e)->name,
2581 Jim_GetString(jteap->body, NULL) );
2582 if (Jim_EvalObj(interp, jteap->body) != JIM_OK) {
2583 Jim_PrintErrorMessage(interp);
2584 }
2585 }
2586
2587 jteap = jteap->next;
2588 }
2589
2590 if (!done) {
2591 LOG_DEBUG( "event %d %s - no action",
2592 e,
2593 Jim_Nvp_value2name_simple( nvp_jtag_tap_event, e)->name);
2594 }
2595 }
2596
2597 static int handle_tms_sequence_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
2598 {
2599 if (argc > 1)
2600 return ERROR_COMMAND_SYNTAX_ERROR;
2601
2602 if (argc == 1)
2603 {
2604 bool use_new_table;
2605 if (strcmp(args[0], "short") == 0)
2606 use_new_table = true;
2607 else if (strcmp(args[0], "long") == 0)
2608 use_new_table = false;
2609 else
2610 return ERROR_COMMAND_SYNTAX_ERROR;
2611
2612 tap_use_new_tms_table(use_new_table);
2613 }
2614
2615 command_print(cmd_ctx, "tms sequence is %s",
2616 tap_uses_new_tms_table() ? "short": "long");
2617
2618 return ERROR_OK;
2619 }
2620
2621 /**
2622 * Function jtag_add_statemove
2623 * moves from the current state to the goal \a state. This needs
2624 * to be handled according to the xsvf spec, see the XSTATE command
2625 * description.
2626 */
2627 int jtag_add_statemove(tap_state_t goal_state)
2628 {
2629 int retval = ERROR_OK;
2630
2631 tap_state_t moves[8];
2632 tap_state_t cur_state = cmd_queue_cur_state;
2633 int i;
2634 int tms_bits;
2635 int tms_count;
2636
2637 LOG_DEBUG( "cur_state=%s goal_state=%s",
2638 tap_state_name(cur_state),
2639 tap_state_name(goal_state) );
2640
2641
2642 /* From the XSVF spec, pertaining to XSTATE:
2643
2644 For special states known as stable states (Test-Logic-Reset,
2645 Run-Test/Idle, Pause-DR, Pause- IR), an XSVF interpreter follows
2646 predefined TAP state paths when the starting state is a stable state and
2647 when the XSTATE specifies a new stable state (see the STATE command in
2648 the [Ref 5] for the TAP state paths between stable states). For
2649 non-stable states, XSTATE should specify a state that is only one TAP
2650 state transition distance from the current TAP state to avoid undefined
2651 TAP state paths. A sequence of multiple XSTATE commands can be issued to
2652 transition the TAP through a specific state path.
2653 */
2654
2655 if (goal_state==cur_state )
2656 ; /* nothing to do */
2657
2658 else if( goal_state==TAP_RESET )
2659 {
2660 jtag_add_tlr();
2661 }
2662
2663 else if( tap_is_state_stable(cur_state) && tap_is_state_stable(goal_state) )
2664 {
2665 /* note: unless tms_bits holds a path that agrees with [Ref 5] in above
2666 spec, then this code is not fully conformant to the xsvf spec. This
2667 puts a burden on tap_get_tms_path() function from the xsvf spec.
2668 If in doubt, you should confirm that that burden is being met.
2669 */
2670
2671 tms_bits = tap_get_tms_path(cur_state, goal_state);
2672 tms_count = tap_get_tms_path_len(cur_state, goal_state);
2673
2674 assert( (unsigned) tms_count < DIM(moves) );
2675
2676 for (i=0; i<tms_count; i++, tms_bits>>=1)
2677 {
2678 bool bit = tms_bits & 1;
2679
2680 cur_state = tap_state_transition(cur_state, bit);
2681 moves[i] = cur_state;
2682 }
2683
2684 jtag_add_pathmove(tms_count, moves);
2685 }
2686
2687 /* else state must be immediately reachable in one clock cycle, and does not
2688 need to be a stable state.
2689 */
2690 else if( tap_state_transition(cur_state, true) == goal_state
2691 || tap_state_transition(cur_state, false) == goal_state )
2692 {
2693 /* move a single state */
2694 moves[0] = goal_state;
2695 jtag_add_pathmove( 1, moves );
2696 }
2697
2698 else
2699 {
2700 retval = ERROR_FAIL;
2701 }
2702
2703 return retval;
2704 }
2705
2706 void jtag_set_nsrst_delay(unsigned delay)
2707 {
2708 jtag_nsrst_delay = delay;
2709 }
2710 unsigned jtag_get_nsrst_delay(void)
2711 {
2712 return jtag_nsrst_delay;
2713 }
2714 void jtag_set_ntrst_delay(unsigned delay)
2715 {
2716 jtag_ntrst_delay = delay;
2717 }
2718 unsigned jtag_get_ntrst_delay(void)
2719 {
2720 return jtag_ntrst_delay;
2721 }
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)