1 /***************************************************************************
2 * Copyright (C) 2007 by Juergen Stuber <juergen@jstuber.net> *
3 * based on Dominic Rath's and Benedikt Sauter's usbprog.c *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2011 by Jean-Christophe PLAGNIOL-VIILARD *
9 * plagnioj@jcrosoft.com *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
31 #include <jtag/interface.h>
32 #include <jtag/commands.h>
33 #include "usb_common.h"
35 /* See Segger's public documentation:
36 * Reference manual for J-Link USB Protocol
37 * Document RM08001-R6 Date: June 16, 2009
38 * (Or newer, with some SWD information).
40 http://www.segger.com/cms/admin/uploads/productDocs/RM08001_JLinkUSBProtocol.pdf
44 * The default pid of the segger is 0x0101
45 * But when you change the USB Address it will also
47 * pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address)
49 #define VID 0x1366, 0x1366, 0x1366, 0x1366
50 #define PID 0x0101, 0x0102, 0x0103, 0x0104
52 #define JLINK_WRITE_ENDPOINT 0x02
53 #define JLINK_READ_ENDPOINT 0x81
55 static unsigned int jlink_write_ep
= JLINK_WRITE_ENDPOINT
;
56 static unsigned int jlink_read_ep
= JLINK_READ_ENDPOINT
;
57 static unsigned int jlink_hw_jtag_version
= 2;
59 #define JLINK_USB_TIMEOUT 1000
61 // See Section 3.3.2 of the Segger JLink USB protocol manual
62 /* 2048 is the max value we can use here */
63 #define JLINK_TAP_BUFFER_SIZE 2048
64 //#define JLINK_TAP_BUFFER_SIZE 256
65 //#define JLINK_TAP_BUFFER_SIZE 384
67 #define JLINK_IN_BUFFER_SIZE 2048
68 #define JLINK_OUT_BUFFER_SIZE 2*2048 + 4
69 #define JLINK_EMU_RESULT_BUFFER_SIZE 64
71 /* Global USB buffers */
72 static uint8_t usb_in_buffer
[JLINK_IN_BUFFER_SIZE
];
73 static uint8_t usb_out_buffer
[JLINK_OUT_BUFFER_SIZE
];
74 static uint8_t usb_emu_result_buffer
[JLINK_EMU_RESULT_BUFFER_SIZE
];
76 /* Constants for JLink command */
77 #define EMU_CMD_VERSION 0x01
78 #define EMU_CMD_SET_SPEED 0x05
79 #define EMU_CMD_GET_STATE 0x07
80 #define EMU_CMD_HW_CLOCK 0xc8
81 #define EMU_CMD_HW_TMS0 0xc9
82 #define EMU_CMD_HW_TMS1 0xca
83 #define EMU_CMD_HW_JTAG2 0xce
84 #define EMU_CMD_HW_JTAG3 0xcf
85 #define EMU_CMD_GET_MAX_MEM_BLOCK 0xd4
86 #define EMU_CMD_HW_RESET0 0xdc
87 #define EMU_CMD_HW_RESET1 0xdd
88 #define EMU_CMD_HW_TRST0 0xde
89 #define EMU_CMD_HW_TRST1 0xdf
90 #define EMU_CMD_GET_CAPS 0xe8
91 #define EMU_CMD_GET_HW_VERSION 0xf0
92 #define EMU_CMD_READ_CONFIG 0xf2
93 #define EMU_CMD_WRITE_CONFIG 0xf3
95 /* bits return from EMU_CMD_GET_CAPS */
96 #define EMU_CAP_RESERVED_1 0
97 #define EMU_CAP_GET_HW_VERSION 1
98 #define EMU_CAP_WRITE_DCC 2
99 #define EMU_CAP_ADAPTIVE_CLOCKING 3
100 #define EMU_CAP_READ_CONFIG 4
101 #define EMU_CAP_WRITE_CONFIG 5
102 #define EMU_CAP_TRACE 6
103 #define EMU_CAP_WRITE_MEM 7
104 #define EMU_CAP_READ_MEM 8
105 #define EMU_CAP_SPEED_INFO 9
106 #define EMU_CAP_EXEC_CODE 10
107 #define EMU_CAP_GET_MAX_BLOCK_SIZE 11
108 #define EMU_CAP_GET_HW_INFO 12
109 #define EMU_CAP_SET_KS_POWER 13
110 #define EMU_CAP_RESET_STOP_TIMED 14
111 #define EMU_CAP_RESERVED_2 15
112 #define EMU_CAP_MEASURE_RTCK_REACT 16
113 #define EMU_CAP_SELECT_IF 17
114 #define EMU_CAP_RW_MEM_ARM79 18
115 #define EMU_CAP_GET_COUNTERS 19
116 #define EMU_CAP_READ_DCC 20
117 #define EMU_CAP_GET_CPU_CAPS 21
118 #define EMU_CAP_EXEC_CPU_CMD 22
119 #define EMU_CAP_SWO 23
120 #define EMU_CAP_WRITE_DCC_EX 24
121 #define EMU_CAP_UPDATE_FIRMWARE_EX 25
122 #define EMU_CAP_FILE_IO 26
123 #define EMU_CAP_REGISTER 27
124 #define EMU_CAP_INDICATORS 28
125 #define EMU_CAP_TEST_NET_SPEED 29
126 #define EMU_CAP_RAWTRACE 30
127 #define EMU_CAP_RESERVED_3 31
129 static char *jlink_cap_str
[] = {
131 "Supports command EMU_CMD_GET_HARDWARE_VERSION",
132 "Supports command EMU_CMD_WRITE_DCC",
133 "Supports adaptive clocking",
134 "Supports command EMU_CMD_READ_CONFIG",
135 "Supports command EMU_CMD_WRITE_CONFIG",
136 "Supports trace commands",
137 "Supports command EMU_CMD_WRITE_MEM",
138 "Supports command EMU_CMD_READ_MEM",
139 "Supports command EMU_CMD_GET_SPEED",
140 "Supports command EMU_CMD_CODE_...",
141 "Supports command EMU_CMD_GET_MAX_BLOCK_SIZE",
142 "Supports command EMU_CMD_GET_HW_INFO",
143 "Supports command EMU_CMD_SET_KS_POWER",
144 "Supports command EMU_CMD_HW_RELEASE_RESET_STOP_TIMED",
146 "Supports command EMU_CMD_MEASURE_RTCK_REACT",
147 "Supports command EMU_CMD_HW_SELECT_IF",
148 "Supports command EMU_CMD_READ/WRITE_MEM_ARM79",
149 "Supports command EMU_CMD_GET_COUNTERS",
150 "Supports command EMU_CMD_READ_DCC",
151 "Supports command EMU_CMD_GET_CPU_CAPS",
152 "Supports command EMU_CMD_EXEC_CPU_CMD",
153 "Supports command EMU_CMD_SWO",
154 "Supports command EMU_CMD_WRITE_DCC_EX",
155 "Supports command EMU_CMD_UPDATE_FIRMWARE_EX",
156 "Supports command EMU_CMD_FILE_IO",
157 "Supports command EMU_CMD_REGISTER",
158 "Supports command EMU_CMD_INDICATORS",
159 "Supports command EMU_CMD_TEST_NET_SPEED",
160 "Supports command EMU_CMD_RAWTRACE",
164 /* max speed 12MHz v5.0 jlink */
165 #define JLINK_MAX_SPEED 12000
167 /* J-Link hardware versions */
168 #define JLINK_HW_TYPE_JLINK 0
169 #define JLINK_HW_TYPE_JTRACE 1
170 #define JLINK_HW_TYPE_FLASHER 2
171 #define JLINK_HW_TYPE_JLINK_PRO 3
172 #define JLINK_HW_TYPE_MAX 4
174 static char *jlink_hw_type_str
[] = {
181 /* Queue command functions */
182 static void jlink_end_state(tap_state_t state
);
183 static void jlink_state_move(void);
184 static void jlink_path_move(int num_states
, tap_state_t
*path
);
185 static void jlink_runtest(int num_cycles
);
186 static void jlink_scan(bool ir_scan
, enum scan_type type
, uint8_t *buffer
,
187 int scan_size
, struct scan_command
*command
);
188 static void jlink_reset(int trst
, int srst
);
189 static void jlink_simple_command(uint8_t command
);
190 static int jlink_get_status(void);
192 /* J-Link tap buffer functions */
193 static void jlink_tap_init(void);
194 static int jlink_tap_execute(void);
195 static void jlink_tap_ensure_space(int scans
, int bits
);
196 static void jlink_tap_append_step(int tms
, int tdi
);
197 static void jlink_tap_append_scan(int length
, uint8_t *buffer
,
198 struct scan_command
*command
);
200 /* Jlink lowlevel functions */
202 struct usb_dev_handle
* usb_handle
;
205 static struct jlink
*jlink_usb_open(void);
206 static void jlink_usb_close(struct jlink
*jlink
);
207 static int jlink_usb_message(struct jlink
*jlink
, int out_length
, int in_length
);
208 static int jlink_usb_write(struct jlink
*jlink
, int out_length
);
209 static int jlink_usb_read(struct jlink
*jlink
, int expected_size
);
210 static int jlink_usb_read_emu_result(struct jlink
*jlink
);
212 /* helper functions */
213 static int jlink_get_version_info(void);
215 #ifdef _DEBUG_USB_COMMS_
216 static void jlink_debug_buffer(uint8_t *buffer
, int length
);
218 static inline void jlink_debug_buffer(uint8_t *buffer
, int length
)
223 static enum tap_state jlink_last_state
= TAP_RESET
;
225 static struct jlink
* jlink_handle
;
227 /* pid could be specified at runtime */
228 static uint16_t vids
[] = { VID
, 0 };
229 static uint16_t pids
[] = { PID
, 0 };
231 static uint32_t jlink_caps
;
232 static uint32_t jlink_hw_type
;
234 /* 256 byte non-volatile memory */
235 struct jlink_config
{
237 /* 0ffset 0x01 to 0x03 */
238 uint8_t reserved_1
[3];
239 uint32_t kickstart_power_on_jtag_pin_19
;
240 /* 0ffset 0x08 to 0x1f */
241 uint8_t reserved_2
[24];
242 /* IP only for J-Link Pro */
243 uint8_t ip_address
[4];
244 uint8_t subnet_mask
[4];
245 /* 0ffset 0x28 to 0x2f */
246 uint8_t reserved_3
[8];
247 uint8_t mac_address
[6];
248 /* 0ffset 0x36 to 0xff */
249 uint8_t reserved_4
[202];
250 } __attribute__ ((packed
));
251 struct jlink_config jlink_cfg
;
253 /***************************************************************************/
254 /* External interface implementation */
256 static void jlink_execute_runtest(struct jtag_command
*cmd
)
258 DEBUG_JTAG_IO("runtest %i cycles, end in %i",
259 cmd
->cmd
.runtest
->num_cycles
,
260 cmd
->cmd
.runtest
->end_state
);
262 jlink_end_state(cmd
->cmd
.runtest
->end_state
);
264 jlink_runtest(cmd
->cmd
.runtest
->num_cycles
);
267 static void jlink_execute_statemove(struct jtag_command
*cmd
)
269 DEBUG_JTAG_IO("statemove end in %i", cmd
->cmd
.statemove
->end_state
);
271 jlink_end_state(cmd
->cmd
.statemove
->end_state
);
275 static void jlink_execute_pathmove(struct jtag_command
*cmd
)
277 DEBUG_JTAG_IO("pathmove: %i states, end in %i",
278 cmd
->cmd
.pathmove
->num_states
,
279 cmd
->cmd
.pathmove
->path
[cmd
->cmd
.pathmove
->num_states
- 1]);
281 jlink_path_move(cmd
->cmd
.pathmove
->num_states
,
282 cmd
->cmd
.pathmove
->path
);
285 static void jlink_execute_scan(struct jtag_command
*cmd
)
291 DEBUG_JTAG_IO("scan end in %s", tap_state_name(cmd
->cmd
.scan
->end_state
));
293 jlink_end_state(cmd
->cmd
.scan
->end_state
);
295 scan_size
= jtag_build_buffer(cmd
->cmd
.scan
, &buffer
);
296 DEBUG_JTAG_IO("scan input, length = %d", scan_size
);
298 jlink_debug_buffer(buffer
, (scan_size
+ 7) / 8);
299 type
= jtag_scan_type(cmd
->cmd
.scan
);
300 jlink_scan(cmd
->cmd
.scan
->ir_scan
,
301 type
, buffer
, scan_size
, cmd
->cmd
.scan
);
304 static void jlink_execute_reset(struct jtag_command
*cmd
)
306 DEBUG_JTAG_IO("reset trst: %i srst %i",
307 cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
310 jlink_reset(cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
314 static void jlink_execute_sleep(struct jtag_command
*cmd
)
316 DEBUG_JTAG_IO("sleep %" PRIi32
"", cmd
->cmd
.sleep
->us
);
318 jtag_sleep(cmd
->cmd
.sleep
->us
);
321 static void jlink_execute_command(struct jtag_command
*cmd
)
325 case JTAG_RUNTEST
: jlink_execute_runtest(cmd
); break;
326 case JTAG_TLR_RESET
: jlink_execute_statemove(cmd
); break;
327 case JTAG_PATHMOVE
: jlink_execute_pathmove(cmd
); break;
328 case JTAG_SCAN
: jlink_execute_scan(cmd
); break;
329 case JTAG_RESET
: jlink_execute_reset(cmd
); break;
330 case JTAG_SLEEP
: jlink_execute_sleep(cmd
); break;
332 LOG_ERROR("BUG: unknown JTAG command type encountered");
337 static int jlink_execute_queue(void)
339 struct jtag_command
*cmd
= jtag_command_queue
;
343 jlink_execute_command(cmd
);
347 return jlink_tap_execute();
350 /* Sets speed in kHz. */
351 static int jlink_speed(int speed
)
355 if (speed
> JLINK_MAX_SPEED
)
357 LOG_INFO("reduce speed request: %dkHz to %dkHz maximum",
358 speed
, JLINK_MAX_SPEED
);
359 speed
= JLINK_MAX_SPEED
;
362 /* check for RTCK setting */
366 usb_out_buffer
[0] = EMU_CMD_SET_SPEED
;
367 usb_out_buffer
[1] = (speed
>> 0) & 0xff;
368 usb_out_buffer
[2] = (speed
>> 8) & 0xff;
370 result
= jlink_usb_write(jlink_handle
, 3);
373 LOG_ERROR("J-Link setting speed failed (%d)", result
);
374 return ERROR_JTAG_DEVICE_ERROR
;
380 static int jlink_speed_div(int speed
, int* khz
)
387 static int jlink_khz(int khz
, int *jtag_speed
)
394 static int jlink_init(void)
398 jlink_handle
= jlink_usb_open();
400 if (jlink_handle
== 0)
402 LOG_ERROR("Cannot find jlink Interface! Please check "
403 "connection and permissions.");
404 return ERROR_JTAG_INIT_FAILED
;
408 * The next three instructions were added after discovering a problem
409 * while using an oscilloscope.
410 * For the V8 SAM-ICE dongle (and likely other j-link device variants),
411 * the reset line to the target microprocessor was found to cycle only
412 * intermittently during emulator startup (even after encountering the
413 * downstream reset instruction later in the code).
414 * This was found to create two issues:
415 * 1) In general it is a bad practice to not reset a CPU to a known
416 * state when starting an emulator and
417 * 2) something critical happens inside the dongle when it does the
418 * first read following a new USB session.
419 * Keeping the processor in reset during the first read collecting
420 * version information seems to prevent errant
421 * "J-Link command EMU_CMD_VERSION failed" issues.
424 LOG_INFO("J-Link initialization started / target CPU reset initiated");
425 jlink_simple_command(EMU_CMD_HW_TRST0
);
426 jlink_simple_command(EMU_CMD_HW_RESET0
);
429 jlink_hw_jtag_version
= 2;
431 if (jlink_get_version_info() == ERROR_OK
)
433 /* attempt to get status */
437 LOG_INFO("J-Link JTAG Interface ready");
443 int retval
= jtag_get_speed(&jtag_speed_var
);
444 if (retval
!= ERROR_OK
)
446 jlink_speed(jtag_speed_var
);
448 /* v5/6 jlink seems to have an issue if the first tap move
449 * is not divisible by 8, so we send a TLR on first power up */
450 for (i
= 0; i
< 8; i
++) {
451 jlink_tap_append_step(1, 0);
458 static int jlink_quit(void)
460 jlink_usb_close(jlink_handle
);
464 /***************************************************************************/
465 /* Queue command implementations */
467 static void jlink_end_state(tap_state_t state
)
469 if (tap_is_state_stable(state
))
471 tap_set_end_state(state
);
475 LOG_ERROR("BUG: %i is not a valid end state", state
);
480 /* Goes to the end state. */
481 static void jlink_state_move(void)
485 uint8_t tms_scan
= tap_get_tms_path(tap_get_state(), tap_get_end_state());
486 uint8_t tms_scan_bits
= tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
488 for (i
= 0; i
< tms_scan_bits
; i
++)
490 tms
= (tms_scan
>> i
) & 1;
491 jlink_tap_append_step(tms
, 0);
494 tap_set_state(tap_get_end_state());
497 static void jlink_path_move(int num_states
, tap_state_t
*path
)
501 for (i
= 0; i
< num_states
; i
++)
503 if (path
[i
] == tap_state_transition(tap_get_state(), false))
505 jlink_tap_append_step(0, 0);
507 else if (path
[i
] == tap_state_transition(tap_get_state(), true))
509 jlink_tap_append_step(1, 0);
513 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
514 tap_state_name(tap_get_state()), tap_state_name(path
[i
]));
518 tap_set_state(path
[i
]);
521 tap_set_end_state(tap_get_state());
524 static void jlink_runtest(int num_cycles
)
528 tap_state_t saved_end_state
= tap_get_end_state();
530 jlink_tap_ensure_space(1,num_cycles
+ 16);
532 /* only do a state_move when we're not already in IDLE */
533 if (tap_get_state() != TAP_IDLE
)
535 jlink_end_state(TAP_IDLE
);
540 /* execute num_cycles */
541 for (i
= 0; i
< num_cycles
; i
++)
543 jlink_tap_append_step(0, 0);
546 /* finish in end_state */
547 jlink_end_state(saved_end_state
);
548 if (tap_get_state() != tap_get_end_state())
554 static void jlink_scan(bool ir_scan
, enum scan_type type
, uint8_t *buffer
,
555 int scan_size
, struct scan_command
*command
)
557 tap_state_t saved_end_state
;
559 jlink_tap_ensure_space(1, scan_size
+ 16);
561 saved_end_state
= tap_get_end_state();
563 /* Move to appropriate scan state */
564 jlink_end_state(ir_scan
? TAP_IRSHIFT
: TAP_DRSHIFT
);
566 /* Only move if we're not already there */
567 if (tap_get_state() != tap_get_end_state())
570 jlink_end_state(saved_end_state
);
573 jlink_tap_append_scan(scan_size
, buffer
, command
);
575 /* We are in Exit1, go to Pause */
576 jlink_tap_append_step(0, 0);
578 tap_set_state(ir_scan
? TAP_IRPAUSE
: TAP_DRPAUSE
);
580 if (tap_get_state() != tap_get_end_state())
586 static void jlink_reset(int trst
, int srst
)
588 LOG_DEBUG("trst: %i, srst: %i", trst
, srst
);
590 /* Signals are active low */
593 jlink_simple_command(EMU_CMD_HW_RESET1
);
597 jlink_simple_command(EMU_CMD_HW_RESET0
);
602 jlink_simple_command(EMU_CMD_HW_TRST0
);
607 jlink_simple_command(EMU_CMD_HW_TRST1
);
611 static void jlink_simple_command(uint8_t command
)
615 DEBUG_JTAG_IO("0x%02x", command
);
617 usb_out_buffer
[0] = command
;
618 result
= jlink_usb_write(jlink_handle
, 1);
622 LOG_ERROR("J-Link command 0x%02x failed (%d)", command
, result
);
626 static int jlink_get_status(void)
630 jlink_simple_command(EMU_CMD_GET_STATE
);
632 result
= jlink_usb_read(jlink_handle
, 8);
635 LOG_ERROR("J-Link command EMU_CMD_GET_STATE failed (%d)", result
);
636 return ERROR_JTAG_DEVICE_ERROR
;
639 int vref
= usb_in_buffer
[0] + (usb_in_buffer
[1] << 8);
640 LOG_INFO("Vref = %d.%d TCK = %d TDI = %d TDO = %d TMS = %d SRST = %d TRST = %d", \
641 vref
/ 1000, vref
% 1000, \
642 usb_in_buffer
[2], usb_in_buffer
[3], usb_in_buffer
[4], \
643 usb_in_buffer
[5], usb_in_buffer
[6], usb_in_buffer
[7]);
646 LOG_ERROR("Vref too low. Check Target Power");
651 #define jlink_dump_printf(context, expr ...) \
654 command_print(context, expr); \
660 static void jlink_caps_dump(struct command_context
*ctx
)
664 jlink_dump_printf(ctx
, "J-Link Capabilities");
666 for (i
= 1; i
< 31; i
++)
667 if (jlink_caps
& (1 << i
))
668 jlink_dump_printf(ctx
, "%s", jlink_cap_str
[i
]);
671 static void jlink_config_usb_address_dump(struct command_context
*ctx
, struct jlink_config
*cfg
)
676 jlink_dump_printf(ctx
, "USB-Address: 0x%x", cfg
->usb_address
);
679 static void jlink_config_kickstart_dump(struct command_context
*ctx
, struct jlink_config
*cfg
)
684 jlink_dump_printf(ctx
, "Kickstart power on JTAG-pin 19: 0x%x",
685 cfg
->kickstart_power_on_jtag_pin_19
);
688 static void jlink_config_mac_address_dump(struct command_context
*ctx
, struct jlink_config
*cfg
)
693 jlink_dump_printf(ctx
, "MAC Address: %.02x:%.02x:%.02x:%.02x:%.02x:%.02x",
694 cfg
->mac_address
[5], cfg
->mac_address
[4],
695 cfg
->mac_address
[3], cfg
->mac_address
[2],
696 cfg
->mac_address
[1], cfg
->mac_address
[0]);
699 static void jlink_config_ip_dump(struct command_context
*ctx
, struct jlink_config
*cfg
)
704 jlink_dump_printf(ctx
, "IP Address: %d.%d.%d.%d",
705 cfg
->ip_address
[3], cfg
->ip_address
[2],
706 cfg
->ip_address
[1], cfg
->ip_address
[0]);
707 jlink_dump_printf(ctx
, "Subnet Mask: %d.%d.%d.%d",
708 cfg
->subnet_mask
[3], cfg
->subnet_mask
[2],
709 cfg
->subnet_mask
[1], cfg
->subnet_mask
[0]);
712 static void jlink_config_dump(struct command_context
*ctx
, struct jlink_config
*cfg
)
717 jlink_dump_printf(ctx
, "J-Link configuration");
718 jlink_config_usb_address_dump(ctx
, cfg
);
719 jlink_config_kickstart_dump(ctx
, cfg
);
721 if (jlink_hw_type
== JLINK_HW_TYPE_JLINK_PRO
)
723 jlink_config_ip_dump(ctx
, cfg
);
724 jlink_config_mac_address_dump(ctx
, cfg
);
728 static int jlink_get_config(struct jlink_config
*cfg
)
731 int size
= sizeof(struct jlink_config
);
733 jlink_simple_command(EMU_CMD_READ_CONFIG
);
735 result
= jlink_usb_read(jlink_handle
, size
);
738 LOG_ERROR("jlink_usb_read failed (requested=%d, result=%d)", size
, result
);
742 memcpy(cfg
, usb_in_buffer
, size
);
745 * Section 4.2.4 IN-transaction
746 * read dummy 0-byte packet
748 jlink_usb_read(jlink_handle
, 1);
753 static int jlink_set_config(struct jlink_config
*cfg
)
756 int size
= sizeof(struct jlink_config
);
758 jlink_simple_command(EMU_CMD_WRITE_CONFIG
);
760 memcpy(usb_out_buffer
, cfg
, size
);
762 result
= jlink_usb_write(jlink_handle
, size
);
765 LOG_ERROR("jlink_usb_write failed (requested=%d, result=%d)", 256, result
);
772 static int jlink_get_version_info(void)
776 uint32_t jlink_max_size
;
778 /* query hardware version */
779 jlink_simple_command(EMU_CMD_VERSION
);
781 result
= jlink_usb_read(jlink_handle
, 2);
784 LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)", result
);
785 return ERROR_JTAG_DEVICE_ERROR
;
788 len
= buf_get_u32(usb_in_buffer
, 0, 16);
789 if (len
> JLINK_IN_BUFFER_SIZE
)
791 LOG_ERROR("J-Link command EMU_CMD_VERSION impossible return length 0x%0x", len
);
792 len
= JLINK_IN_BUFFER_SIZE
;
795 result
= jlink_usb_read(jlink_handle
, len
);
798 LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)", result
);
799 return ERROR_JTAG_DEVICE_ERROR
;
802 usb_in_buffer
[result
] = 0;
803 LOG_INFO("%s", (char *)usb_in_buffer
);
805 /* query hardware capabilities */
806 jlink_simple_command(EMU_CMD_GET_CAPS
);
808 result
= jlink_usb_read(jlink_handle
, 4);
811 LOG_ERROR("J-Link command EMU_CMD_GET_CAPS failed (%d)", result
);
812 return ERROR_JTAG_DEVICE_ERROR
;
815 jlink_caps
= buf_get_u32(usb_in_buffer
, 0, 32);
816 LOG_INFO("J-Link caps 0x%x", (unsigned)jlink_caps
);
818 if (jlink_caps
& (1 << EMU_CAP_GET_HW_VERSION
))
820 /* query hardware version */
821 jlink_simple_command(EMU_CMD_GET_HW_VERSION
);
823 result
= jlink_usb_read(jlink_handle
, 4);
826 LOG_ERROR("J-Link command EMU_CMD_GET_HW_VERSION failed (%d)", result
);
827 return ERROR_JTAG_DEVICE_ERROR
;
830 uint32_t jlink_hw_version
= buf_get_u32(usb_in_buffer
, 0, 32);
831 uint32_t major_revision
= (jlink_hw_version
/ 10000) % 100;
832 jlink_hw_type
= (jlink_hw_version
/ 1000000) % 100;
833 if (major_revision
>= 5)
834 jlink_hw_jtag_version
= 3;
836 LOG_INFO("J-Link hw version %i", (int)jlink_hw_version
);
838 if (jlink_hw_type
>= JLINK_HW_TYPE_MAX
)
839 LOG_INFO("J-Link hw type uknown 0x%x", jlink_hw_type
);
841 LOG_INFO("J-Link hw type %s", jlink_hw_type_str
[jlink_hw_type
]);
844 if (jlink_caps
& (1 << EMU_CAP_GET_MAX_BLOCK_SIZE
))
846 /* query hardware maximum memory block */
847 jlink_simple_command(EMU_CMD_GET_MAX_MEM_BLOCK
);
849 result
= jlink_usb_read(jlink_handle
, 4);
852 LOG_ERROR("J-Link command EMU_CMD_GET_MAX_MEM_BLOCK failed (%d)", result
);
853 return ERROR_JTAG_DEVICE_ERROR
;
856 jlink_max_size
= buf_get_u32(usb_in_buffer
, 0, 32);
857 LOG_INFO("J-Link max mem block %i", (int)jlink_max_size
);
860 if (jlink_caps
& (1 << EMU_CAP_READ_CONFIG
))
862 if (jlink_get_config(&jlink_cfg
) != ERROR_OK
)
863 return ERROR_JTAG_DEVICE_ERROR
;
865 jlink_config_dump(NULL
, &jlink_cfg
);
871 COMMAND_HANDLER(jlink_pid_command
)
875 LOG_ERROR("Need exactly one argument to jlink_pid");
879 pids
[0] = strtoul(CMD_ARGV
[0], NULL
, 16);
886 COMMAND_HANDLER(jlink_handle_jlink_info_command
)
888 if (jlink_get_version_info() == ERROR_OK
)
890 /* attempt to get status */
897 COMMAND_HANDLER(jlink_handle_jlink_caps_command
)
899 jlink_caps_dump(CMD_CTX
);
904 COMMAND_HANDLER(jlink_handle_jlink_hw_jtag_command
)
908 command_print(CMD_CTX
, "J-Link hw jtag %i", jlink_hw_jtag_version
);
911 int request_version
= atoi(CMD_ARGV
[0]);
912 switch (request_version
) {
914 jlink_hw_jtag_version
= request_version
;
917 return ERROR_COMMAND_SYNTAX_ERROR
;
922 return ERROR_COMMAND_SYNTAX_ERROR
;
928 COMMAND_HANDLER(jlink_handle_jlink_kickstart_command
)
934 jlink_config_kickstart_dump(CMD_CTX
, &jlink_cfg
);
938 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], kickstart
);
940 jlink_cfg
.kickstart_power_on_jtag_pin_19
= kickstart
;
944 COMMAND_HANDLER(jlink_handle_jlink_mac_address_command
)
953 jlink_config_mac_address_dump(CMD_CTX
, &jlink_cfg
);
959 if ((strlen(str
) != 17) || (str
[2] != ':' || str
[5] != ':' || str
[8] != ':' ||
960 str
[11] != ':' || str
[14] != ':'))
962 command_print(CMD_CTX
, "ethaddr miss format ff:ff:ff:ff:ff:ff");
963 return ERROR_COMMAND_SYNTAX_ERROR
;
966 for (i
= 5; i
>= 0; i
--)
968 addr
[i
] = strtoul(str
, &e
, 16);
972 if (!(addr
[0] | addr
[1] | addr
[2] | addr
[3] | addr
[4] | addr
[5]))
974 command_print(CMD_CTX
, "invalid it's zero mac_address");
975 return ERROR_COMMAND_SYNTAX_ERROR
;
978 if (!(0x01 & addr
[0]))
980 command_print(CMD_CTX
, "invalid it's a multicat mac_address");
981 return ERROR_COMMAND_SYNTAX_ERROR
;
984 memcpy(jlink_cfg
.mac_address
, addr
, sizeof(addr
));
989 static int string_to_ip(const char *s
, uint8_t *ip
, int *pos
)
993 const char *s_save
= s
;
999 for (i
= 0; i
< 4; i
++) {
1000 lip
[i
] = strtoul(s
, &e
, 10);
1002 if (*e
!= '.' && i
!= 3)
1010 memcpy(ip
, lip
, sizeof(lip
));
1014 static void cpy_ip(uint8_t *dst
, uint8_t *src
)
1018 for (i
= 0, j
= 3; i
< 4; i
++, j
--)
1022 COMMAND_HANDLER(jlink_handle_jlink_ip_command
)
1024 uint32_t ip_address
;
1025 uint32_t subnet_mask
= 0;
1028 uint8_t subnet_bits
= 24;
1032 jlink_config_ip_dump(CMD_CTX
, &jlink_cfg
);
1036 ret
= string_to_ip(CMD_ARGV
[0], (uint8_t*)&ip_address
, &i
);
1037 if (ret
!= ERROR_OK
)
1040 len
= strlen(CMD_ARGV
[0]);
1042 /* check for this format A.B.C.D/E */
1046 if (CMD_ARGV
[0][i
] != '/')
1047 return ERROR_COMMAND_SYNTAX_ERROR
;
1049 COMMAND_PARSE_NUMBER(u8
, CMD_ARGV
[0] + i
+ 1, subnet_bits
);
1055 ret
= string_to_ip(CMD_ARGV
[1], (uint8_t*)&subnet_mask
, &i
);
1056 if (ret
!= ERROR_OK
)
1062 subnet_mask
= (uint32_t)(subnet_bits
< 32 ?
1063 ((1ULL << subnet_bits
) -1) : 0xffffffff);
1065 cpy_ip(jlink_cfg
.ip_address
, (uint8_t*)&ip_address
);
1066 cpy_ip(jlink_cfg
.subnet_mask
, (uint8_t*)&subnet_mask
);
1071 COMMAND_HANDLER(jlink_handle_jlink_reset_command
)
1073 memset(&jlink_cfg
, 0xff, sizeof(jlink_cfg
));
1077 COMMAND_HANDLER(jlink_handle_jlink_save_command
)
1079 if (!(jlink_caps
& (1 << EMU_CAP_WRITE_CONFIG
)))
1081 command_print(CMD_CTX
, "J-Link write emulator configuration not supported");
1085 command_print(CMD_CTX
, "The J-Link need to be unpluged and repluged ta have the config effective");
1086 return jlink_set_config(&jlink_cfg
);
1089 COMMAND_HANDLER(jlink_handle_jlink_usb_address_command
)
1095 jlink_config_usb_address_dump(CMD_CTX
, &jlink_cfg
);
1099 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], address
);
1101 if (address
> 0x3 && address
!= 0xff)
1103 command_print(CMD_CTX
, "USB Address must be between 0x00 and 0x03 or 0xff");
1104 return ERROR_COMMAND_SYNTAX_ERROR
;
1107 jlink_cfg
.usb_address
= address
;
1111 COMMAND_HANDLER(jlink_handle_jlink_config_command
)
1113 struct jlink_config cfg
;
1118 if (!(jlink_caps
& (1 << EMU_CAP_READ_CONFIG
)))
1120 command_print(CMD_CTX
, "J-Link read emulator configuration not supported");
1124 ret
= jlink_get_config(&cfg
);
1126 if ( ret
!= ERROR_OK
)
1127 command_print(CMD_CTX
, "J-Link read emulator configuration failled");
1129 jlink_config_dump(CMD_CTX
, &jlink_cfg
);
1136 static const struct command_registration jlink_config_subcommand_handlers
[] = {
1138 .name
= "kickstart",
1139 .handler
= &jlink_handle_jlink_kickstart_command
,
1140 .mode
= COMMAND_EXEC
,
1141 .help
= "set Kickstart power on JTAG-pin 19.",
1145 .name
= "mac_address",
1146 .handler
= &jlink_handle_jlink_mac_address_command
,
1147 .mode
= COMMAND_EXEC
,
1148 .help
= "set the MAC Address",
1149 .usage
= "[ff:ff:ff:ff:ff:ff]",
1153 .handler
= &jlink_handle_jlink_ip_command
,
1154 .mode
= COMMAND_EXEC
,
1155 .help
= "set the ip address of the J-Link Pro, "
1156 "where A.B.C.D is the ip, "
1157 "E the bit of the subnet mask, "
1158 "F.G.H.I the subnet mask",
1159 .usage
= "[A.B.C.D[/E] [F.G.H.I]]",
1163 .handler
= &jlink_handle_jlink_reset_command
,
1164 .mode
= COMMAND_EXEC
,
1165 .help
= "reset the current config",
1169 .handler
= &jlink_handle_jlink_save_command
,
1170 .mode
= COMMAND_EXEC
,
1171 .help
= "save the current config",
1174 .name
= "usb_address",
1175 .handler
= &jlink_handle_jlink_usb_address_command
,
1176 .mode
= COMMAND_EXEC
,
1177 .help
= "set the USB-Address, "
1178 "This will change the product id",
1179 .usage
= "[0x00 to 0x03 or 0xff]",
1181 COMMAND_REGISTRATION_DONE
1184 static const struct command_registration jlink_subcommand_handlers
[] = {
1187 .handler
= &jlink_handle_jlink_caps_command
,
1188 .mode
= COMMAND_EXEC
,
1189 .help
= "show jlink capabilities",
1193 .handler
= &jlink_handle_jlink_info_command
,
1194 .mode
= COMMAND_EXEC
,
1195 .help
= "show jlink info",
1199 .handler
= &jlink_handle_jlink_hw_jtag_command
,
1200 .mode
= COMMAND_EXEC
,
1201 .help
= "access J-Link HW JTAG command version",
1206 .handler
= &jlink_handle_jlink_config_command
,
1207 .mode
= COMMAND_EXEC
,
1208 .help
= "access J-Link configuration, "
1209 "if no argument this will dump the config",
1210 .chain
= jlink_config_subcommand_handlers
,
1214 .handler
= &jlink_pid_command
,
1215 .mode
= COMMAND_CONFIG
,
1216 .help
= "set the pid of the interface we want to use",
1218 COMMAND_REGISTRATION_DONE
1221 static const struct command_registration jlink_command_handlers
[] = {
1224 .mode
= COMMAND_ANY
,
1225 .help
= "perform jlink management",
1226 .chain
= jlink_subcommand_handlers
,
1228 COMMAND_REGISTRATION_DONE
1231 struct jtag_interface jlink_interface
= {
1233 .commands
= jlink_command_handlers
,
1235 .execute_queue
= jlink_execute_queue
,
1236 .speed
= jlink_speed
,
1237 .speed_div
= jlink_speed_div
,
1243 /***************************************************************************/
1244 /* J-Link tap functions */
1247 static unsigned tap_length
= 0;
1248 static uint8_t tms_buffer
[JLINK_TAP_BUFFER_SIZE
];
1249 static uint8_t tdi_buffer
[JLINK_TAP_BUFFER_SIZE
];
1250 static uint8_t tdo_buffer
[JLINK_TAP_BUFFER_SIZE
];
1252 struct pending_scan_result
{
1253 int first
; /* First bit position in tdo_buffer to read */
1254 int length
; /* Number of bits to read */
1255 struct scan_command
*command
; /* Corresponding scan command */
1259 #define MAX_PENDING_SCAN_RESULTS 256
1261 static int pending_scan_results_length
;
1262 static struct pending_scan_result pending_scan_results_buffer
[MAX_PENDING_SCAN_RESULTS
];
1264 static void jlink_tap_init(void)
1267 pending_scan_results_length
= 0;
1270 static void jlink_tap_ensure_space(int scans
, int bits
)
1272 int available_scans
= MAX_PENDING_SCAN_RESULTS
- pending_scan_results_length
;
1273 int available_bits
= JLINK_TAP_BUFFER_SIZE
* 8 - tap_length
- 32;
1275 if (scans
> available_scans
|| bits
> available_bits
)
1277 jlink_tap_execute();
1281 static void jlink_tap_append_step(int tms
, int tdi
)
1283 int index_var
= tap_length
/ 8;
1285 if (index_var
>= JLINK_TAP_BUFFER_SIZE
)
1287 LOG_ERROR("jlink_tap_append_step: overflow");
1288 *(uint32_t *)0xFFFFFFFF = 0;
1292 int bit_index
= tap_length
% 8;
1293 uint8_t bit
= 1 << bit_index
;
1295 // we do not pad TMS, so be sure to initialize all bits
1298 tms_buffer
[index_var
] = tdi_buffer
[index_var
] = 0;
1302 tms_buffer
[index_var
] |= bit
;
1304 tms_buffer
[index_var
] &= ~bit
;
1307 tdi_buffer
[index_var
] |= bit
;
1309 tdi_buffer
[index_var
] &= ~bit
;
1314 static void jlink_tap_append_scan(int length
, uint8_t *buffer
,
1315 struct scan_command
*command
)
1317 struct pending_scan_result
*pending_scan_result
=
1318 &pending_scan_results_buffer
[pending_scan_results_length
];
1321 pending_scan_result
->first
= tap_length
;
1322 pending_scan_result
->length
= length
;
1323 pending_scan_result
->command
= command
;
1324 pending_scan_result
->buffer
= buffer
;
1326 for (i
= 0; i
< length
; i
++)
1328 int tms
= (i
< (length
- 1)) ? 0 : 1;
1329 int tdi
= (buffer
[i
/ 8] & (1 << (i
% 8))) != 0;
1330 jlink_tap_append_step(tms
, tdi
);
1332 pending_scan_results_length
++;
1335 /* Pad and send a tap sequence to the device, and receive the answer.
1336 * For the purpose of padding we assume that we are in idle or pause state. */
1337 static int jlink_tap_execute(void)
1346 /* JLink returns an extra NULL in packet when size of incoming
1347 * message is a multiple of 64, creates problems with USB comms.
1348 * WARNING: This will interfere with tap state counting. */
1349 while ((DIV_ROUND_UP(tap_length
, 8) % 64) == 0)
1351 jlink_tap_append_step((tap_get_state() == TAP_RESET
) ? 1 : 0, 0);
1354 // number of full bytes (plus one if some would be left over)
1355 byte_length
= DIV_ROUND_UP(tap_length
, 8);
1357 bool use_jtag3
= jlink_hw_jtag_version
>= 3;
1358 usb_out_buffer
[0] = use_jtag3
? EMU_CMD_HW_JTAG3
: EMU_CMD_HW_JTAG2
;
1359 usb_out_buffer
[1] = 0;
1360 usb_out_buffer
[2] = (tap_length
>> 0) & 0xff;
1361 usb_out_buffer
[3] = (tap_length
>> 8) & 0xff;
1362 memcpy(usb_out_buffer
+ 4, tms_buffer
, byte_length
);
1363 memcpy(usb_out_buffer
+ 4 + byte_length
, tdi_buffer
, byte_length
);
1365 jlink_last_state
= jtag_debug_state_machine(tms_buffer
, tdi_buffer
,
1366 tap_length
, jlink_last_state
);
1368 result
= jlink_usb_message(jlink_handle
, 4 + 2 * byte_length
, byte_length
);
1369 if (result
!= byte_length
)
1371 LOG_ERROR("jlink_tap_execute, wrong result %d (expected %d)",
1372 result
, byte_length
);
1374 return ERROR_JTAG_QUEUE_FAILED
;
1377 memcpy(tdo_buffer
, usb_in_buffer
, byte_length
);
1379 for (i
= 0; i
< pending_scan_results_length
; i
++)
1381 struct pending_scan_result
*pending_scan_result
= &pending_scan_results_buffer
[i
];
1382 uint8_t *buffer
= pending_scan_result
->buffer
;
1383 int length
= pending_scan_result
->length
;
1384 int first
= pending_scan_result
->first
;
1385 struct scan_command
*command
= pending_scan_result
->command
;
1387 /* Copy to buffer */
1388 buf_set_buf(tdo_buffer
, first
, buffer
, 0, length
);
1390 DEBUG_JTAG_IO("pending scan result, length = %d", length
);
1392 jlink_debug_buffer(buffer
, DIV_ROUND_UP(length
, 8));
1394 if (jtag_read_buffer(buffer
, command
) != ERROR_OK
)
1397 return ERROR_JTAG_QUEUE_FAILED
;
1400 if (pending_scan_result
->buffer
!= NULL
)
1402 free(pending_scan_result
->buffer
);
1410 /*****************************************************************************/
1411 /* JLink USB low-level functions */
1413 static struct jlink
* jlink_usb_open()
1417 struct usb_dev_handle
*dev
;
1418 if (jtag_usb_open(vids
, pids
, &dev
) != ERROR_OK
)
1421 /* BE ***VERY CAREFUL*** ABOUT MAKING CHANGES IN THIS
1422 * AREA!!!!!!!!!!! The behavior of libusb is not completely
1423 * consistent across Windows, Linux, and Mac OS X platforms.
1424 * The actions taken in the following compiler conditionals may
1425 * not agree with published documentation for libusb, but were
1426 * found to be necessary through trials and tribulations. Even
1427 * little tweaks can break one or more platforms, so if you do
1428 * make changes test them carefully on all platforms before
1439 /* reopen jlink after usb_reset
1440 * on win32 this may take a second or two to re-enumerate */
1442 while ((retval
= jtag_usb_open(vids
, pids
, &dev
)) != ERROR_OK
)
1450 if (ERROR_OK
!= retval
)
1456 /* usb_set_configuration required under win32 */
1457 struct usb_device
*udev
= usb_device(dev
);
1458 usb_set_configuration(dev
, udev
->config
[0].bConfigurationValue
);
1459 usb_claim_interface(dev
, 0);
1463 * This makes problems under Mac OS X. And is not needed
1464 * under Windows. Hopefully this will not break a linux build
1466 usb_set_altinterface(result
->usb_handle
, 0);
1468 struct usb_interface
*iface
= udev
->config
->interface
;
1469 struct usb_interface_descriptor
*desc
= iface
->altsetting
;
1470 for (int i
= 0; i
< desc
->bNumEndpoints
; i
++)
1472 uint8_t epnum
= desc
->endpoint
[i
].bEndpointAddress
;
1473 bool is_input
= epnum
& 0x80;
1474 LOG_DEBUG("usb ep %s %02x", is_input
? "in" : "out", epnum
);
1476 jlink_read_ep
= epnum
;
1478 jlink_write_ep
= epnum
;
1481 struct jlink
*result
= malloc(sizeof(struct jlink
));
1482 result
->usb_handle
= dev
;
1486 static void jlink_usb_close(struct jlink
*jlink
)
1488 usb_close(jlink
->usb_handle
);
1492 /* Send a message and receive the reply. */
1493 static int jlink_usb_message(struct jlink
*jlink
, int out_length
, int in_length
)
1497 result
= jlink_usb_write(jlink
, out_length
);
1498 if (result
!= out_length
)
1500 LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)",
1501 out_length
, result
);
1502 return ERROR_JTAG_DEVICE_ERROR
;
1505 result
= jlink_usb_read(jlink
, in_length
);
1506 if ((result
!= in_length
) && (result
!= (in_length
+ 1)))
1508 LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)",
1510 return ERROR_JTAG_DEVICE_ERROR
;
1513 if (jlink_hw_jtag_version
< 3)
1516 int result2
= ERROR_OK
;
1517 if (result
== in_length
)
1519 /* Must read the result from the EMU too */
1520 result2
= jlink_usb_read_emu_result(jlink
);
1523 LOG_ERROR("jlink_usb_read_emu_result retried requested = 1, "
1524 "result=%d, in_length=%i", result2
, in_length
);
1525 /* Try again once, should only happen if (in_length%64 == 0) */
1526 result2
= jlink_usb_read_emu_result(jlink
);
1529 LOG_ERROR("jlink_usb_read_emu_result failed "
1530 "(requested = 1, result=%d)", result2
);
1531 return ERROR_JTAG_DEVICE_ERROR
;
1535 /* Check the result itself */
1536 result2
= usb_emu_result_buffer
[0];
1540 /* Save the result, then remove it from return value */
1541 result2
= usb_in_buffer
[result
--];
1546 LOG_ERROR("jlink_usb_message failed with result=%d)", result2
);
1547 return ERROR_JTAG_DEVICE_ERROR
;
1553 /* calls the given usb_bulk_* function, allowing for the data to
1554 * trickle in with some timeouts */
1555 static int usb_bulk_with_retries(
1556 int (*f
)(usb_dev_handle
*, int, char *, int, int),
1557 usb_dev_handle
*dev
, int ep
,
1558 char *bytes
, int size
, int timeout
)
1560 int tries
= 3, count
= 0;
1562 while (tries
&& (count
< size
))
1564 int result
= f(dev
, ep
, bytes
+ count
, size
- count
, timeout
);
1567 else if ((-ETIMEDOUT
!= result
) || !--tries
)
1573 static int wrap_usb_bulk_write(usb_dev_handle
*dev
, int ep
,
1574 char *buff
, int size
, int timeout
)
1576 /* usb_bulk_write() takes const char *buff */
1577 return usb_bulk_write(dev
, ep
, buff
, size
, timeout
);
1580 static inline int usb_bulk_write_ex(usb_dev_handle
*dev
, int ep
,
1581 char *bytes
, int size
, int timeout
)
1583 return usb_bulk_with_retries(&wrap_usb_bulk_write
,
1584 dev
, ep
, bytes
, size
, timeout
);
1587 static inline int usb_bulk_read_ex(usb_dev_handle
*dev
, int ep
,
1588 char *bytes
, int size
, int timeout
)
1590 return usb_bulk_with_retries(&usb_bulk_read
,
1591 dev
, ep
, bytes
, size
, timeout
);
1594 /* Write data from out_buffer to USB. */
1595 static int jlink_usb_write(struct jlink
*jlink
, int out_length
)
1599 if (out_length
> JLINK_OUT_BUFFER_SIZE
)
1601 LOG_ERROR("jlink_write illegal out_length=%d (max=%d)",
1602 out_length
, JLINK_OUT_BUFFER_SIZE
);
1606 result
= usb_bulk_write_ex(jlink
->usb_handle
, jlink_write_ep
,
1607 (char *)usb_out_buffer
, out_length
, JLINK_USB_TIMEOUT
);
1609 DEBUG_JTAG_IO("jlink_usb_write, out_length = %d, result = %d",
1610 out_length
, result
);
1612 jlink_debug_buffer(usb_out_buffer
, out_length
);
1616 /* Read data from USB into in_buffer. */
1617 static int jlink_usb_read(struct jlink
*jlink
, int expected_size
)
1619 int result
= usb_bulk_read_ex(jlink
->usb_handle
, jlink_read_ep
,
1620 (char *)usb_in_buffer
, expected_size
, JLINK_USB_TIMEOUT
);
1622 DEBUG_JTAG_IO("jlink_usb_read, result = %d", result
);
1624 jlink_debug_buffer(usb_in_buffer
, result
);
1628 /* Read the result from the previous EMU cmd into result_buffer. */
1629 static int jlink_usb_read_emu_result(struct jlink
*jlink
)
1631 int result
= usb_bulk_read_ex(jlink
->usb_handle
, jlink_read_ep
,
1632 (char *)usb_emu_result_buffer
, 1 /* JLINK_EMU_RESULT_BUFFER_SIZE */,
1635 DEBUG_JTAG_IO("jlink_usb_read_result, result = %d", result
);
1637 jlink_debug_buffer(usb_emu_result_buffer
, result
);
1641 #ifdef _DEBUG_USB_COMMS_
1642 #define BYTES_PER_LINE 16
1644 static void jlink_debug_buffer(uint8_t *buffer
, int length
)
1651 for (i
= 0; i
< length
; i
+= BYTES_PER_LINE
)
1653 snprintf(line
, 5, "%04x", i
);
1654 for (j
= i
; j
< i
+ BYTES_PER_LINE
&& j
< length
; j
++)
1656 snprintf(s
, 4, " %02x", buffer
[j
]);
1659 LOG_DEBUG("%s", line
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)