fix flash driver size, sector erase
[openocd.git] / src / flash / nor / dsp5680xx_flash.c
1 /***************************************************************************
2 * Copyright (C) 2011 by Rodrigo L. Rosa *
3 * rodrigorosa.LG@gmail.com *
4 * *
5 * Based on a file written by: *
6 * Kevin McGuire *
7 * Marcel Wijlaars *
8 * Michael Ashton *
9 * *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License as published by *
12 * the Free Software Foundation; either version 2 of the License, or *
13 * (at your option) any later version. *
14 * *
15 * This program is distributed in the hope that it will be useful, *
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
18 * GNU General Public License for more details. *
19 * *
20 * You should have received a copy of the GNU General Public License *
21 * along with this program; if not, write to the *
22 * Free Software Foundation, Inc., *
23 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
24 ***************************************************************************/
25
26 #ifdef HAVE_CONFIG_H
27 #include "config.h"
28 #endif
29
30 #ifndef DSP5680XX_FLASH_H
31 #define DSP5680XX_FLASH_H
32
33 #include "imp.h"
34 #include <helper/binarybuffer.h>
35 #include <helper/time_support.h>
36 #include <target/algorithm.h>
37 #include <target/dsp5680xx.h>
38
39 struct dsp5680xx_flash_bank {
40 struct working_area *write_algorithm;
41 };
42
43 static int dsp5680xx_build_sector_list(struct flash_bank *bank){
44 uint32_t offset = HFM_FLASH_BASE_ADDR;
45 bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
46 int i;
47 for (i = 0; i < bank->num_sectors; ++i){
48 bank->sectors[i].offset = i*HFM_SECTOR_SIZE;
49 bank->sectors[i].size = HFM_SECTOR_SIZE;
50 offset += bank->sectors[i].size;
51 bank->sectors[i].is_erased = -1;
52 bank->sectors[i].is_protected = -1;
53 }
54 LOG_USER("%s not tested yet.",__FUNCTION__);
55 return ERROR_OK;
56
57 }
58
59 // flash bank dsp5680xx 0 0 0 0 <target#>
60 FLASH_BANK_COMMAND_HANDLER(dsp5680xx_flash_bank_command){
61 struct dsp5680xx_flash_bank *nbank;
62
63 nbank = malloc(sizeof(struct dsp5680xx_flash_bank));
64
65 bank->base = HFM_FLASH_BASE_ADDR;
66 bank->size = HFM_SIZE_BYTES; // top 4k not accessible
67 bank->driver_priv = nbank;
68 bank->num_sectors = HFM_SECTOR_COUNT;
69 dsp5680xx_build_sector_list(bank);
70
71 return ERROR_OK;
72 }
73
74 static int dsp5680xx_flash_protect_check(struct flash_bank *bank){
75 int retval = ERROR_OK;
76 uint16_t protected = 0;
77 retval = dsp5680xx_f_protect_check(bank->target,&protected);
78 if(retval != ERROR_OK){
79 for(int i = 0;i<HFM_SECTOR_COUNT;i++)
80 bank->sectors[i].is_protected = -1;
81 return ERROR_OK;
82 }
83 for(int i = 0;i<HFM_SECTOR_COUNT/2;i++){
84 if(protected & 1){
85 bank->sectors[2*i].is_protected = 1;
86 bank->sectors[2*i+1].is_protected = 1;
87 }else{
88 bank->sectors[2*i].is_protected = 0;
89 bank->sectors[2*i+1].is_protected = 0;
90 }
91 protected = (protected >> 1);
92 }
93 return retval;
94 }
95
96 static int dsp5680xx_flash_protect(struct flash_bank *bank, int set, int first, int last){
97 // This applies security to flash module after next reset, it does not actually apply protection (protection refers to undesired access from the core)
98 int retval;
99 if(set){
100 retval = dsp5680xx_f_lock(bank->target);
101 if(retval == ERROR_OK){
102 for(int i = first;i<last;i++)
103 bank->sectors[i].is_protected = 1;
104 }
105 }else{
106 retval = dsp5680xx_f_unlock(bank->target);
107 if(retval == ERROR_OK)
108 for(int i = first;i<last;i++)
109 bank->sectors[i].is_protected = 0;
110 }
111 return retval;
112 }
113
114 /*
115 static int dsp5680xx_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count){
116 LOG_USER("%s not implemented",__FUNCTION__);
117 return ERROR_OK;
118 }
119
120 static int dsp5680xx_write_single(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count){
121 LOG_USER("%s not implemented",__FUNCTION__);
122 return ERROR_OK;
123 }
124 */
125
126 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
127 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
128 // Flash stuff test
129 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
130 //-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
131
132 static int dsp5680xx_flash_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count){
133 int retval;
134 if((offset + count/2)>bank->size){
135 LOG_ERROR("%s: Flash bank cannot fit data.",__FUNCTION__);
136 return ERROR_FAIL;
137 }
138 if(offset%2){
139 LOG_ERROR("%s: Writing to odd addresses not supported. This chip uses word addressing, Openocd only supports byte addressing. The workaround results in disabling writing to odd byte addresses.",__FUNCTION__);
140 return ERROR_FAIL;
141 }
142 retval = dsp5680xx_f_wr(bank->target, buffer, bank->base + offset/2, count);
143 if(retval == ERROR_OK)
144 bank->sectors[0].is_erased = 0;
145 else
146 bank->sectors[0].is_erased = -1;
147 return retval;
148 }
149
150 static int dsp5680xx_probe(struct flash_bank *bank){
151 LOG_DEBUG("%s not implemented",__FUNCTION__);
152 return ERROR_OK;
153 }
154
155 static int dsp5680xx_flash_info(struct flash_bank *bank, char *buf, int buf_size){
156 snprintf(buf, buf_size, "\ndsp5680xx flash driver info:\n - Currently only full erase/lock/unlock are implemented. \n - Call with bank==0 and sector 0 to 0.\n - Protect requires arp_init-reset to complete. \n - Before removing protection the master tap must be selected, and arp_init-reset is required to complete unlocking.");
157 return ERROR_OK;
158 }
159 /*
160 static int dsp5680xx_set_write_enable(struct target *target, int enable){
161 LOG_USER("%s not implemented",__FUNCTION__);
162 return ERROR_OK;
163 }
164
165
166 static int dsp5680xx_check_flash_completion(struct target* target, unsigned int timeout_ms){
167 LOG_USER("%s not implemented",__FUNCTION__);
168 return ERROR_OK;
169 }
170 */
171
172 static int dsp5680xx_flash_erase(struct flash_bank * bank, int first, int last){
173 int retval;
174 retval = dsp5680xx_f_erase(bank->target, (uint32_t) first, (uint32_t) last);
175 if(retval == ERROR_OK)
176 for(int i = first;i<=last;i++)
177 bank->sectors[i].is_erased = 1;
178 else
179 // If an error occurred unknown status is set even though some sector could have been correctly erased.
180 for(int i = first;i<=last;i++)
181 bank->sectors[i].is_erased = -1;
182 return retval;
183 }
184
185 static int dsp5680xx_flash_erase_check(struct flash_bank * bank){
186 int retval = ERROR_OK;
187 uint8_t erased = 0;
188 uint32_t i;
189 for(i=0;i<HFM_SECTOR_COUNT;i++){
190 if(bank->sectors[i].is_erased == -1){
191 retval = dsp5680xx_f_erase_check(bank->target,&erased,i);
192 if (retval != ERROR_OK){
193 bank->sectors[i].is_erased = -1;
194 }else{
195 if(erased)
196 bank->sectors[i].is_erased = 1;
197 else
198 bank->sectors[i].is_erased = 0;
199 }
200 }
201 }
202 return retval;
203 }
204
205 struct flash_driver dsp5680xx_flash = {
206 .name = "dsp5680xx_flash",
207 .flash_bank_command = dsp5680xx_flash_bank_command,
208 .erase = dsp5680xx_flash_erase,
209 .protect = dsp5680xx_flash_protect,
210 .write = dsp5680xx_flash_write,
211 //.read = default_flash_read,
212 .probe = dsp5680xx_probe,
213 .auto_probe = dsp5680xx_probe,
214 .erase_check = dsp5680xx_flash_erase_check,
215 .protect_check = dsp5680xx_flash_protect_check,
216 .info = dsp5680xx_flash_info
217 };
218 #endif // dsp5680xx_flash.h

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)