1 /***************************************************************************
2 * Copyright (C) 2005, 2007 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * Copyright (C) 2009 Michael Schwingen *
5 * michael@schwingen.org *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
21 ***************************************************************************/
29 #include <target/arm.h>
30 #include <helper/binarybuffer.h>
31 #include <target/algorithm.h>
34 #define CFI_MAX_BUS_WIDTH 4
35 #define CFI_MAX_CHIP_WIDTH 4
37 /* defines internal maximum size for code fragment in cfi_intel_write_block() */
38 #define CFI_MAX_INTEL_CODESIZE 256
40 static struct cfi_unlock_addresses cfi_unlock_addresses
[] =
42 [CFI_UNLOCK_555_2AA
] = { .unlock1
= 0x555, .unlock2
= 0x2aa },
43 [CFI_UNLOCK_5555_2AAA
] = { .unlock1
= 0x5555, .unlock2
= 0x2aaa },
46 /* CFI fixups foward declarations */
47 static void cfi_fixup_0002_erase_regions(struct flash_bank
*flash
, void *param
);
48 static void cfi_fixup_0002_unlock_addresses(struct flash_bank
*flash
, void *param
);
49 static void cfi_fixup_atmel_reversed_erase_regions(struct flash_bank
*flash
, void *param
);
51 /* fixup after reading cmdset 0002 primary query table */
52 static const struct cfi_fixup cfi_0002_fixups
[] = {
53 {CFI_MFR_SST
, 0x00D4, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
54 {CFI_MFR_SST
, 0x00D5, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
55 {CFI_MFR_SST
, 0x00D6, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
56 {CFI_MFR_SST
, 0x00D7, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
57 {CFI_MFR_SST
, 0x2780, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
58 {CFI_MFR_ATMEL
, 0x00C8, cfi_fixup_atmel_reversed_erase_regions
, NULL
},
59 {CFI_MFR_FUJITSU
, 0x226b, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
60 {CFI_MFR_AMIC
, 0xb31a, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
61 {CFI_MFR_MX
, 0x225b, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
62 {CFI_MFR_AMD
, 0x225b, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
63 {CFI_MFR_ANY
, CFI_ID_ANY
, cfi_fixup_0002_erase_regions
, NULL
},
67 /* fixup after reading cmdset 0001 primary query table */
68 static const struct cfi_fixup cfi_0001_fixups
[] = {
72 static void cfi_fixup(struct flash_bank
*bank
, const struct cfi_fixup
*fixups
)
74 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
75 const struct cfi_fixup
*f
;
77 for (f
= fixups
; f
->fixup
; f
++)
79 if (((f
->mfr
== CFI_MFR_ANY
) || (f
->mfr
== cfi_info
->manufacturer
)) &&
80 ((f
->id
== CFI_ID_ANY
) || (f
->id
== cfi_info
->device_id
)))
82 f
->fixup(bank
, f
->param
);
87 /* inline uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset) */
88 static __inline__
uint32_t flash_address(struct flash_bank
*bank
, int sector
, uint32_t offset
)
90 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
92 if (cfi_info
->x16_as_x8
) offset
*= 2;
94 /* while the sector list isn't built, only accesses to sector 0 work */
96 return bank
->base
+ offset
* bank
->bus_width
;
101 LOG_ERROR("BUG: sector list not yet built");
104 return bank
->base
+ bank
->sectors
[sector
].offset
+ offset
* bank
->bus_width
;
109 static void cfi_command(struct flash_bank
*bank
, uint8_t cmd
, uint8_t *cmd_buf
)
113 /* clear whole buffer, to ensure bits that exceed the bus_width
116 for (i
= 0; i
< CFI_MAX_BUS_WIDTH
; i
++)
119 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
121 for (i
= bank
->bus_width
; i
> 0; i
--)
123 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
128 for (i
= 1; i
<= bank
->bus_width
; i
++)
130 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
135 static int cfi_send_command(struct flash_bank
*bank
, uint8_t cmd
, uint32_t address
)
137 uint8_t command
[CFI_MAX_BUS_WIDTH
];
139 cfi_command(bank
, cmd
, command
);
140 return target_write_memory(bank
->target
, address
, bank
->bus_width
, 1, command
);
143 /* read unsigned 8-bit value from the bank
144 * flash banks are expected to be made of similar chips
145 * the query result should be the same for all
147 static uint8_t cfi_query_u8(struct flash_bank
*bank
, int sector
, uint32_t offset
)
149 struct target
*target
= bank
->target
;
150 uint8_t data
[CFI_MAX_BUS_WIDTH
];
152 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 1, data
);
154 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
157 return data
[bank
->bus_width
- 1];
160 /* read unsigned 8-bit value from the bank
161 * in case of a bank made of multiple chips,
162 * the individual values are ORed
164 static uint8_t cfi_get_u8(struct flash_bank
*bank
, int sector
, uint32_t offset
)
166 struct target
*target
= bank
->target
;
167 uint8_t data
[CFI_MAX_BUS_WIDTH
];
170 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 1, data
);
172 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
174 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
182 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
183 value
|= data
[bank
->bus_width
- 1 - i
];
189 static uint16_t cfi_query_u16(struct flash_bank
*bank
, int sector
, uint32_t offset
)
191 struct target
*target
= bank
->target
;
192 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
193 uint8_t data
[CFI_MAX_BUS_WIDTH
* 2];
195 if (cfi_info
->x16_as_x8
)
198 for (i
= 0;i
< 2;i
++)
199 target_read_memory(target
, flash_address(bank
, sector
, offset
+ i
), bank
->bus_width
, 1,
200 &data
[i
*bank
->bus_width
]);
203 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 2, data
);
205 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
206 return data
[0] | data
[bank
->bus_width
] << 8;
208 return data
[bank
->bus_width
- 1] | data
[(2 * bank
->bus_width
) - 1] << 8;
211 static uint32_t cfi_query_u32(struct flash_bank
*bank
, int sector
, uint32_t offset
)
213 struct target
*target
= bank
->target
;
214 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
215 uint8_t data
[CFI_MAX_BUS_WIDTH
* 4];
217 if (cfi_info
->x16_as_x8
)
220 for (i
= 0;i
< 4;i
++)
221 target_read_memory(target
, flash_address(bank
, sector
, offset
+ i
), bank
->bus_width
, 1,
222 &data
[i
*bank
->bus_width
]);
225 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 4, data
);
227 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
228 return data
[0] | data
[bank
->bus_width
] << 8 | data
[bank
->bus_width
* 2] << 16 | data
[bank
->bus_width
* 3] << 24;
230 return data
[bank
->bus_width
- 1] | data
[(2* bank
->bus_width
) - 1] << 8 |
231 data
[(3 * bank
->bus_width
) - 1] << 16 | data
[(4 * bank
->bus_width
) - 1] << 24;
234 static void cfi_intel_clear_status_register(struct flash_bank
*bank
)
236 struct target
*target
= bank
->target
;
238 if (target
->state
!= TARGET_HALTED
)
240 LOG_ERROR("BUG: attempted to clear status register while target wasn't halted");
244 cfi_send_command(bank
, 0x50, flash_address(bank
, 0, 0x0));
247 static uint8_t cfi_intel_wait_status_busy(struct flash_bank
*bank
, int timeout
)
251 while ((!((status
= cfi_get_u8(bank
, 0, 0x0)) & 0x80)) && (timeout
-- > 0))
253 LOG_DEBUG("status: 0x%x", status
);
257 /* mask out bit 0 (reserved) */
258 status
= status
& 0xfe;
260 LOG_DEBUG("status: 0x%x", status
);
262 if ((status
& 0x80) != 0x80)
264 LOG_ERROR("timeout while waiting for WSM to become ready");
266 else if (status
!= 0x80)
268 LOG_ERROR("status register: 0x%x", status
);
270 LOG_ERROR("Block Lock-Bit Detected, Operation Abort");
272 LOG_ERROR("Program suspended");
274 LOG_ERROR("Low Programming Voltage Detected, Operation Aborted");
276 LOG_ERROR("Program Error / Error in Setting Lock-Bit");
278 LOG_ERROR("Error in Block Erasure or Clear Lock-Bits");
280 LOG_ERROR("Block Erase Suspended");
282 cfi_intel_clear_status_register(bank
);
288 static int cfi_spansion_wait_status_busy(struct flash_bank
*bank
, int timeout
)
290 uint8_t status
, oldstatus
;
291 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
293 oldstatus
= cfi_get_u8(bank
, 0, 0x0);
296 status
= cfi_get_u8(bank
, 0, 0x0);
297 if ((status
^ oldstatus
) & 0x40) {
298 if (status
& cfi_info
->status_poll_mask
& 0x20) {
299 oldstatus
= cfi_get_u8(bank
, 0, 0x0);
300 status
= cfi_get_u8(bank
, 0, 0x0);
301 if ((status
^ oldstatus
) & 0x40) {
302 LOG_ERROR("dq5 timeout, status: 0x%x", status
);
303 return(ERROR_FLASH_OPERATION_FAILED
);
305 LOG_DEBUG("status: 0x%x", status
);
309 } else { /* no toggle: finished, OK */
310 LOG_DEBUG("status: 0x%x", status
);
316 } while (timeout
-- > 0);
318 LOG_ERROR("timeout, status: 0x%x", status
);
320 return(ERROR_FLASH_BUSY
);
323 static int cfi_read_intel_pri_ext(struct flash_bank
*bank
)
326 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
327 struct cfi_intel_pri_ext
*pri_ext
= malloc(sizeof(struct cfi_intel_pri_ext
));
329 cfi_info
->pri_ext
= pri_ext
;
331 pri_ext
->pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
332 pri_ext
->pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
333 pri_ext
->pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
335 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I'))
337 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
341 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
345 LOG_ERROR("Could not read bank flash bank information");
346 return ERROR_FLASH_BANK_INVALID
;
349 pri_ext
->major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
350 pri_ext
->minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
352 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
354 pri_ext
->feature_support
= cfi_query_u32(bank
, 0, cfi_info
->pri_addr
+ 5);
355 pri_ext
->suspend_cmd_support
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9);
356 pri_ext
->blk_status_reg_mask
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xa);
358 LOG_DEBUG("feature_support: 0x%" PRIx32
", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x",
359 pri_ext
->feature_support
,
360 pri_ext
->suspend_cmd_support
,
361 pri_ext
->blk_status_reg_mask
);
363 pri_ext
->vcc_optimal
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xc);
364 pri_ext
->vpp_optimal
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xd);
366 LOG_DEBUG("Vcc opt: %x.%x, Vpp opt: %u.%x",
367 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
368 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
370 pri_ext
->num_protection_fields
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xe);
371 if (pri_ext
->num_protection_fields
!= 1)
373 LOG_WARNING("expected one protection register field, but found %i", pri_ext
->num_protection_fields
);
376 pri_ext
->prot_reg_addr
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xf);
377 pri_ext
->fact_prot_reg_size
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x11);
378 pri_ext
->user_prot_reg_size
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x12);
380 LOG_DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
, 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
385 static int cfi_read_spansion_pri_ext(struct flash_bank
*bank
)
388 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
389 struct cfi_spansion_pri_ext
*pri_ext
= malloc(sizeof(struct cfi_spansion_pri_ext
));
391 cfi_info
->pri_ext
= pri_ext
;
393 pri_ext
->pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
394 pri_ext
->pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
395 pri_ext
->pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
397 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I'))
399 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
403 LOG_ERROR("Could not read spansion bank information");
404 return ERROR_FLASH_BANK_INVALID
;
407 pri_ext
->major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
408 pri_ext
->minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
410 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
412 pri_ext
->SiliconRevision
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5);
413 pri_ext
->EraseSuspend
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6);
414 pri_ext
->BlkProt
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7);
415 pri_ext
->TmpBlkUnprotect
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8);
416 pri_ext
->BlkProtUnprot
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9);
417 pri_ext
->SimultaneousOps
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 10);
418 pri_ext
->BurstMode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 11);
419 pri_ext
->PageMode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 12);
420 pri_ext
->VppMin
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 13);
421 pri_ext
->VppMax
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 14);
422 pri_ext
->TopBottom
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 15);
424 LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext
->SiliconRevision
,
425 pri_ext
->EraseSuspend
, pri_ext
->BlkProt
);
427 LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext
->TmpBlkUnprotect
,
428 pri_ext
->BlkProtUnprot
, pri_ext
->SimultaneousOps
);
430 LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext
->BurstMode
, pri_ext
->PageMode
);
433 LOG_DEBUG("Vpp min: %u.%x, Vpp max: %u.%x",
434 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
435 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
437 LOG_DEBUG("WP# protection 0x%x", pri_ext
->TopBottom
);
439 /* default values for implementation specific workarounds */
440 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
441 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
442 pri_ext
->_reversed_geometry
= 0;
447 static int cfi_read_atmel_pri_ext(struct flash_bank
*bank
)
450 struct cfi_atmel_pri_ext atmel_pri_ext
;
451 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
452 struct cfi_spansion_pri_ext
*pri_ext
= malloc(sizeof(struct cfi_spansion_pri_ext
));
454 /* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
455 * but a different primary extended query table.
456 * We read the atmel table, and prepare a valid AMD/Spansion query table.
459 memset(pri_ext
, 0, sizeof(struct cfi_spansion_pri_ext
));
461 cfi_info
->pri_ext
= pri_ext
;
463 atmel_pri_ext
.pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
464 atmel_pri_ext
.pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
465 atmel_pri_ext
.pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
467 if ((atmel_pri_ext
.pri
[0] != 'P') || (atmel_pri_ext
.pri
[1] != 'R') || (atmel_pri_ext
.pri
[2] != 'I'))
469 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
473 LOG_ERROR("Could not read atmel bank information");
474 return ERROR_FLASH_BANK_INVALID
;
477 pri_ext
->pri
[0] = atmel_pri_ext
.pri
[0];
478 pri_ext
->pri
[1] = atmel_pri_ext
.pri
[1];
479 pri_ext
->pri
[2] = atmel_pri_ext
.pri
[2];
481 atmel_pri_ext
.major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
482 atmel_pri_ext
.minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
484 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext
.pri
[0], atmel_pri_ext
.pri
[1], atmel_pri_ext
.pri
[2], atmel_pri_ext
.major_version
, atmel_pri_ext
.minor_version
);
486 pri_ext
->major_version
= atmel_pri_ext
.major_version
;
487 pri_ext
->minor_version
= atmel_pri_ext
.minor_version
;
489 atmel_pri_ext
.features
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5);
490 atmel_pri_ext
.bottom_boot
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6);
491 atmel_pri_ext
.burst_mode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7);
492 atmel_pri_ext
.page_mode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8);
494 LOG_DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
495 atmel_pri_ext
.features
, atmel_pri_ext
.bottom_boot
, atmel_pri_ext
.burst_mode
, atmel_pri_ext
.page_mode
);
497 if (atmel_pri_ext
.features
& 0x02)
498 pri_ext
->EraseSuspend
= 2;
500 if (atmel_pri_ext
.bottom_boot
)
501 pri_ext
->TopBottom
= 2;
503 pri_ext
->TopBottom
= 3;
505 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
506 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
511 static int cfi_read_0002_pri_ext(struct flash_bank
*bank
)
513 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
515 if (cfi_info
->manufacturer
== CFI_MFR_ATMEL
)
517 return cfi_read_atmel_pri_ext(bank
);
521 return cfi_read_spansion_pri_ext(bank
);
525 static int cfi_spansion_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
528 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
529 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
531 printed
= snprintf(buf
, buf_size
, "\nSpansion primary algorithm extend information:\n");
535 printed
= snprintf(buf
, buf_size
, "pri: '%c%c%c', version: %c.%c\n", pri_ext
->pri
[0],
536 pri_ext
->pri
[1], pri_ext
->pri
[2],
537 pri_ext
->major_version
, pri_ext
->minor_version
);
541 printed
= snprintf(buf
, buf_size
, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
542 (pri_ext
->SiliconRevision
) >> 2,
543 (pri_ext
->SiliconRevision
) & 0x03);
547 printed
= snprintf(buf
, buf_size
, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
548 pri_ext
->EraseSuspend
,
553 printed
= snprintf(buf
, buf_size
, "VppMin: %u.%x, VppMax: %u.%x\n",
554 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
555 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
560 static int cfi_intel_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
563 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
564 struct cfi_intel_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
566 printed
= snprintf(buf
, buf_size
, "\nintel primary algorithm extend information:\n");
570 printed
= snprintf(buf
, buf_size
, "pri: '%c%c%c', version: %c.%c\n", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
574 printed
= snprintf(buf
, buf_size
, "feature_support: 0x%" PRIx32
", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext
->feature_support
, pri_ext
->suspend_cmd_support
, pri_ext
->blk_status_reg_mask
);
578 printed
= snprintf(buf
, buf_size
, "Vcc opt: %x.%x, Vpp opt: %u.%x\n",
579 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
580 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
584 printed
= snprintf(buf
, buf_size
, "protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i\n", pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
, 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
589 /* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
591 FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command
)
593 struct cfi_flash_bank
*cfi_info
;
597 LOG_WARNING("incomplete flash_bank cfi configuration");
598 return ERROR_FLASH_BANK_INVALID
;
601 if ((bank
->chip_width
> CFI_MAX_CHIP_WIDTH
)
602 || (bank
->bus_width
> CFI_MAX_BUS_WIDTH
))
604 LOG_ERROR("chip and bus width have to specified in bytes");
605 return ERROR_FLASH_BANK_INVALID
;
608 cfi_info
= malloc(sizeof(struct cfi_flash_bank
));
609 cfi_info
->probed
= 0;
610 bank
->driver_priv
= cfi_info
;
612 cfi_info
->write_algorithm
= NULL
;
614 cfi_info
->x16_as_x8
= 0;
615 cfi_info
->jedec_probe
= 0;
616 cfi_info
->not_cfi
= 0;
618 for (unsigned i
= 6; i
< CMD_ARGC
; i
++)
620 if (strcmp(CMD_ARGV
[i
], "x16_as_x8") == 0)
622 cfi_info
->x16_as_x8
= 1;
624 else if (strcmp(CMD_ARGV
[i
], "jedec_probe") == 0)
626 cfi_info
->jedec_probe
= 1;
630 cfi_info
->write_algorithm
= NULL
;
632 /* bank wasn't probed yet */
633 cfi_info
->qry
[0] = -1;
638 static int cfi_intel_erase(struct flash_bank
*bank
, int first
, int last
)
641 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
644 cfi_intel_clear_status_register(bank
);
646 for (i
= first
; i
<= last
; i
++)
648 if ((retval
= cfi_send_command(bank
, 0x20, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
653 if ((retval
= cfi_send_command(bank
, 0xd0, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
658 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->block_erase_timeout_typ
)) == 0x80)
659 bank
->sectors
[i
].is_erased
= 1;
662 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
667 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32
, i
, bank
->base
);
668 return ERROR_FLASH_OPERATION_FAILED
;
672 return cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
675 static int cfi_spansion_erase(struct flash_bank
*bank
, int first
, int last
)
678 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
679 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
682 for (i
= first
; i
<= last
; i
++)
684 if ((retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
689 if ((retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
))) != ERROR_OK
)
694 if ((retval
= cfi_send_command(bank
, 0x80, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
699 if ((retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
704 if ((retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
))) != ERROR_OK
)
709 if ((retval
= cfi_send_command(bank
, 0x30, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
714 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->block_erase_timeout_typ
)) == ERROR_OK
)
715 bank
->sectors
[i
].is_erased
= 1;
718 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
723 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32
, i
, bank
->base
);
724 return ERROR_FLASH_OPERATION_FAILED
;
728 return cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
731 static int cfi_erase(struct flash_bank
*bank
, int first
, int last
)
733 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
735 if (bank
->target
->state
!= TARGET_HALTED
)
737 LOG_ERROR("Target not halted");
738 return ERROR_TARGET_NOT_HALTED
;
741 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
))
743 return ERROR_FLASH_SECTOR_INVALID
;
746 if (cfi_info
->qry
[0] != 'Q')
747 return ERROR_FLASH_BANK_NOT_PROBED
;
749 switch (cfi_info
->pri_id
)
753 return cfi_intel_erase(bank
, first
, last
);
756 return cfi_spansion_erase(bank
, first
, last
);
759 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
766 static int cfi_intel_protect(struct flash_bank
*bank
, int set
, int first
, int last
)
769 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
770 struct cfi_intel_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
771 struct target
*target
= bank
->target
; /* FIXME: to be removed */
772 uint8_t command
[CFI_MAX_BUS_WIDTH
]; /* FIXME: to be removed */
776 /* if the device supports neither legacy lock/unlock (bit 3) nor
777 * instant individual block locking (bit 5).
779 if (!(pri_ext
->feature_support
& 0x28))
780 return ERROR_FLASH_OPERATION_FAILED
;
782 cfi_intel_clear_status_register(bank
);
784 for (i
= first
; i
<= last
; i
++)
786 cfi_command(bank
, 0x60, command
); /* FIXME: to be removed */
787 LOG_DEBUG("address: 0x%4.4" PRIx32
", command: 0x%4.4" PRIx32
, flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
788 if ((retval
= cfi_send_command(bank
, 0x60, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
794 cfi_command(bank
, 0x01, command
); /* FIXME: to be removed */
795 LOG_DEBUG("address: 0x%4.4" PRIx32
", command: 0x%4.4" PRIx32
, flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
796 if ((retval
= cfi_send_command(bank
, 0x01, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
800 bank
->sectors
[i
].is_protected
= 1;
804 cfi_command(bank
, 0xd0, command
); /* FIXME: to be removed */
805 LOG_DEBUG("address: 0x%4.4" PRIx32
", command: 0x%4.4" PRIx32
, flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
806 if ((retval
= cfi_send_command(bank
, 0xd0, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
810 bank
->sectors
[i
].is_protected
= 0;
813 /* instant individual block locking doesn't require reading of the status register */
814 if (!(pri_ext
->feature_support
& 0x20))
816 /* Clear lock bits operation may take up to 1.4s */
817 cfi_intel_wait_status_busy(bank
, 1400);
821 uint8_t block_status
;
822 /* read block lock bit, to verify status */
823 if ((retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, 0x55))) != ERROR_OK
)
827 block_status
= cfi_get_u8(bank
, i
, 0x2);
829 if ((block_status
& 0x1) != set
)
831 LOG_ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set
, block_status
);
832 if ((retval
= cfi_send_command(bank
, 0x70, flash_address(bank
, 0, 0x55))) != ERROR_OK
)
836 cfi_intel_wait_status_busy(bank
, 10);
839 return ERROR_FLASH_OPERATION_FAILED
;
849 /* if the device doesn't support individual block lock bits set/clear,
850 * all blocks have been unlocked in parallel, so we set those that should be protected
852 if ((!set
) && (!(pri_ext
->feature_support
& 0x20)))
854 for (i
= 0; i
< bank
->num_sectors
; i
++)
856 if (bank
->sectors
[i
].is_protected
== 1)
858 cfi_intel_clear_status_register(bank
);
860 if ((retval
= cfi_send_command(bank
, 0x60, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
865 if ((retval
= cfi_send_command(bank
, 0x01, flash_address(bank
, i
, 0x0))) != ERROR_OK
)
870 cfi_intel_wait_status_busy(bank
, 100);
875 return cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
878 static int cfi_protect(struct flash_bank
*bank
, int set
, int first
, int last
)
880 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
882 if (bank
->target
->state
!= TARGET_HALTED
)
884 LOG_ERROR("Target not halted");
885 return ERROR_TARGET_NOT_HALTED
;
888 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
))
890 return ERROR_FLASH_SECTOR_INVALID
;
893 if (cfi_info
->qry
[0] != 'Q')
894 return ERROR_FLASH_BANK_NOT_PROBED
;
896 switch (cfi_info
->pri_id
)
900 cfi_intel_protect(bank
, set
, first
, last
);
903 LOG_ERROR("protect: cfi primary command set %i unsupported", cfi_info
->pri_id
);
910 /* FIXME Replace this by a simple memcpy() - still unsure about sideeffects */
911 static void cfi_add_byte(struct flash_bank
*bank
, uint8_t *word
, uint8_t byte
)
913 /* struct target *target = bank->target; */
918 * The data to flash must not be changed in endian! We write a bytestrem in
919 * target byte order already. Only the control and status byte lane of the flash
920 * WSM is interpreted by the CPU in different ways, when read a uint16_t or uint32_t
921 * word (data seems to be in the upper or lower byte lane for uint16_t accesses).
925 if (target
->endianness
== TARGET_LITTLE_ENDIAN
)
929 for (i
= 0; i
< bank
->bus_width
- 1; i
++)
930 word
[i
] = word
[i
+ 1];
931 word
[bank
->bus_width
- 1] = byte
;
937 for (i
= bank
->bus_width
- 1; i
> 0; i
--)
938 word
[i
] = word
[i
- 1];
944 /* Convert code image to target endian */
945 /* FIXME create general block conversion fcts in target.c?) */
946 static void cfi_fix_code_endian(struct target
*target
, uint8_t *dest
, const uint32_t *src
, uint32_t count
)
949 for (i
= 0; i
< count
; i
++)
951 target_buffer_set_u32(target
, dest
, *src
);
957 static uint32_t cfi_command_val(struct flash_bank
*bank
, uint8_t cmd
)
959 struct target
*target
= bank
->target
;
961 uint8_t buf
[CFI_MAX_BUS_WIDTH
];
962 cfi_command(bank
, cmd
, buf
);
963 switch (bank
->bus_width
)
969 return target_buffer_get_u16(target
, buf
);
972 return target_buffer_get_u32(target
, buf
);
975 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
980 static int cfi_intel_write_block(struct flash_bank
*bank
, uint8_t *buffer
, uint32_t address
, uint32_t count
)
982 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
983 struct target
*target
= bank
->target
;
984 struct reg_param reg_params
[7];
985 struct arm_algorithm armv4_5_info
;
986 struct working_area
*source
;
987 uint32_t buffer_size
= 32768;
988 uint32_t write_command_val
, busy_pattern_val
, error_pattern_val
;
990 /* algorithm register usage:
991 * r0: source address (in RAM)
992 * r1: target address (in Flash)
994 * r3: flash write command
995 * r4: status byte (returned to host)
996 * r5: busy test pattern
997 * r6: error test pattern
1000 static const uint32_t word_32_code
[] = {
1001 0xe4904004, /* loop: ldr r4, [r0], #4 */
1002 0xe5813000, /* str r3, [r1] */
1003 0xe5814000, /* str r4, [r1] */
1004 0xe5914000, /* busy: ldr r4, [r1] */
1005 0xe0047005, /* and r7, r4, r5 */
1006 0xe1570005, /* cmp r7, r5 */
1007 0x1afffffb, /* bne busy */
1008 0xe1140006, /* tst r4, r6 */
1009 0x1a000003, /* bne done */
1010 0xe2522001, /* subs r2, r2, #1 */
1011 0x0a000001, /* beq done */
1012 0xe2811004, /* add r1, r1 #4 */
1013 0xeafffff2, /* b loop */
1014 0xeafffffe /* done: b -2 */
1017 static const uint32_t word_16_code
[] = {
1018 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
1019 0xe1c130b0, /* strh r3, [r1] */
1020 0xe1c140b0, /* strh r4, [r1] */
1021 0xe1d140b0, /* busy ldrh r4, [r1] */
1022 0xe0047005, /* and r7, r4, r5 */
1023 0xe1570005, /* cmp r7, r5 */
1024 0x1afffffb, /* bne busy */
1025 0xe1140006, /* tst r4, r6 */
1026 0x1a000003, /* bne done */
1027 0xe2522001, /* subs r2, r2, #1 */
1028 0x0a000001, /* beq done */
1029 0xe2811002, /* add r1, r1 #2 */
1030 0xeafffff2, /* b loop */
1031 0xeafffffe /* done: b -2 */
1034 static const uint32_t word_8_code
[] = {
1035 0xe4d04001, /* loop: ldrb r4, [r0], #1 */
1036 0xe5c13000, /* strb r3, [r1] */
1037 0xe5c14000, /* strb r4, [r1] */
1038 0xe5d14000, /* busy ldrb r4, [r1] */
1039 0xe0047005, /* and r7, r4, r5 */
1040 0xe1570005, /* cmp r7, r5 */
1041 0x1afffffb, /* bne busy */
1042 0xe1140006, /* tst r4, r6 */
1043 0x1a000003, /* bne done */
1044 0xe2522001, /* subs r2, r2, #1 */
1045 0x0a000001, /* beq done */
1046 0xe2811001, /* add r1, r1 #1 */
1047 0xeafffff2, /* b loop */
1048 0xeafffffe /* done: b -2 */
1050 uint8_t target_code
[4*CFI_MAX_INTEL_CODESIZE
];
1051 const uint32_t *target_code_src
;
1052 uint32_t target_code_size
;
1053 int retval
= ERROR_OK
;
1056 cfi_intel_clear_status_register(bank
);
1058 armv4_5_info
.common_magic
= ARM_COMMON_MAGIC
;
1059 armv4_5_info
.core_mode
= ARM_MODE_SVC
;
1060 armv4_5_info
.core_state
= ARM_STATE_ARM
;
1062 /* If we are setting up the write_algorith, we need target_code_src */
1063 /* if not we only need target_code_size. */
1065 /* However, we don't want to create multiple code paths, so we */
1066 /* do the unecessary evaluation of target_code_src, which the */
1067 /* compiler will probably nicely optimize away if not needed */
1069 /* prepare algorithm code for target endian */
1070 switch (bank
->bus_width
)
1073 target_code_src
= word_8_code
;
1074 target_code_size
= sizeof(word_8_code
);
1077 target_code_src
= word_16_code
;
1078 target_code_size
= sizeof(word_16_code
);
1081 target_code_src
= word_32_code
;
1082 target_code_size
= sizeof(word_32_code
);
1085 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
1086 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1089 /* flash write code */
1090 if (!cfi_info
->write_algorithm
)
1092 if (target_code_size
> sizeof(target_code
))
1094 LOG_WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
1095 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1097 cfi_fix_code_endian(target
, target_code
, target_code_src
, target_code_size
/ 4);
1099 /* Get memory for block write handler */
1100 retval
= target_alloc_working_area(target
, target_code_size
, &cfi_info
->write_algorithm
);
1101 if (retval
!= ERROR_OK
)
1103 LOG_WARNING("No working area available, can't do block memory writes");
1104 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1107 /* write algorithm code to working area */
1108 retval
= target_write_buffer(target
, cfi_info
->write_algorithm
->address
, target_code_size
, target_code
);
1109 if (retval
!= ERROR_OK
)
1111 LOG_ERROR("Unable to write block write code to target");
1116 /* Get a workspace buffer for the data to flash starting with 32k size.
1117 Half size until buffer would be smaller 256 Bytem then fail back */
1118 /* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */
1119 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
)
1122 if (buffer_size
<= 256)
1124 LOG_WARNING("no large enough working area available, can't do block memory writes");
1125 retval
= ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1130 /* setup algo registers */
1131 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1132 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1133 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1134 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1135 init_reg_param(®_params
[4], "r4", 32, PARAM_IN
);
1136 init_reg_param(®_params
[5], "r5", 32, PARAM_OUT
);
1137 init_reg_param(®_params
[6], "r6", 32, PARAM_OUT
);
1139 /* prepare command and status register patterns */
1140 write_command_val
= cfi_command_val(bank
, 0x40);
1141 busy_pattern_val
= cfi_command_val(bank
, 0x80);
1142 error_pattern_val
= cfi_command_val(bank
, 0x7e);
1144 LOG_INFO("Using target buffer at 0x%08" PRIx32
" and of size 0x%04" PRIx32
, source
->address
, buffer_size
);
1146 /* Programming main loop */
1149 uint32_t thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1152 if ((retval
= target_write_buffer(target
, source
->address
, thisrun_count
, buffer
)) != ERROR_OK
)
1157 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1158 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1159 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1161 buf_set_u32(reg_params
[3].value
, 0, 32, write_command_val
);
1162 buf_set_u32(reg_params
[5].value
, 0, 32, busy_pattern_val
);
1163 buf_set_u32(reg_params
[6].value
, 0, 32, error_pattern_val
);
1165 LOG_INFO("Write 0x%04" PRIx32
" bytes to flash at 0x%08" PRIx32
, thisrun_count
, address
);
1167 /* Execute algorithm, assume breakpoint for last instruction */
1168 retval
= target_run_algorithm(target
, 0, NULL
, 7, reg_params
,
1169 cfi_info
->write_algorithm
->address
,
1170 cfi_info
->write_algorithm
->address
+ target_code_size
- sizeof(uint32_t),
1171 10000, /* 10s should be enough for max. 32k of data */
1174 /* On failure try a fall back to direct word writes */
1175 if (retval
!= ERROR_OK
)
1177 cfi_intel_clear_status_register(bank
);
1178 LOG_ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
1179 retval
= ERROR_FLASH_OPERATION_FAILED
;
1180 /* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */
1181 /* FIXME To allow fall back or recovery, we must save the actual status
1182 somewhere, so that a higher level code can start recovery. */
1186 /* Check return value from algo code */
1187 wsm_error
= buf_get_u32(reg_params
[4].value
, 0, 32) & error_pattern_val
;
1190 /* read status register (outputs debug inforation) */
1191 cfi_intel_wait_status_busy(bank
, 100);
1192 cfi_intel_clear_status_register(bank
);
1193 retval
= ERROR_FLASH_OPERATION_FAILED
;
1197 buffer
+= thisrun_count
;
1198 address
+= thisrun_count
;
1199 count
-= thisrun_count
;
1202 /* free up resources */
1205 target_free_working_area(target
, source
);
1207 if (cfi_info
->write_algorithm
)
1209 target_free_working_area(target
, cfi_info
->write_algorithm
);
1210 cfi_info
->write_algorithm
= NULL
;
1213 destroy_reg_param(®_params
[0]);
1214 destroy_reg_param(®_params
[1]);
1215 destroy_reg_param(®_params
[2]);
1216 destroy_reg_param(®_params
[3]);
1217 destroy_reg_param(®_params
[4]);
1218 destroy_reg_param(®_params
[5]);
1219 destroy_reg_param(®_params
[6]);
1224 static int cfi_spansion_write_block(struct flash_bank
*bank
, uint8_t *buffer
, uint32_t address
, uint32_t count
)
1226 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1227 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
1228 struct target
*target
= bank
->target
;
1229 struct reg_param reg_params
[10];
1230 struct arm_algorithm armv4_5_info
;
1231 struct working_area
*source
;
1232 uint32_t buffer_size
= 32768;
1234 int retval
, retvaltemp
;
1235 int exit_code
= ERROR_OK
;
1237 /* input parameters - */
1238 /* R0 = source address */
1239 /* R1 = destination address */
1240 /* R2 = number of writes */
1241 /* R3 = flash write command */
1242 /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
1243 /* output parameters - */
1244 /* R5 = 0x80 ok 0x00 bad */
1245 /* temp registers - */
1246 /* R6 = value read from flash to test status */
1247 /* R7 = holding register */
1248 /* unlock registers - */
1249 /* R8 = unlock1_addr */
1250 /* R9 = unlock1_cmd */
1251 /* R10 = unlock2_addr */
1252 /* R11 = unlock2_cmd */
1254 static const uint32_t word_32_code
[] = {
1255 /* 00008100 <sp_32_code>: */
1256 0xe4905004, /* ldr r5, [r0], #4 */
1257 0xe5889000, /* str r9, [r8] */
1258 0xe58ab000, /* str r11, [r10] */
1259 0xe5883000, /* str r3, [r8] */
1260 0xe5815000, /* str r5, [r1] */
1261 0xe1a00000, /* nop */
1263 /* 00008110 <sp_32_busy>: */
1264 0xe5916000, /* ldr r6, [r1] */
1265 0xe0257006, /* eor r7, r5, r6 */
1266 0xe0147007, /* ands r7, r4, r7 */
1267 0x0a000007, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1268 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1269 0x0afffff9, /* beq 8110 <sp_32_busy> ; b if DQ5 low */
1270 0xe5916000, /* ldr r6, [r1] */
1271 0xe0257006, /* eor r7, r5, r6 */
1272 0xe0147007, /* ands r7, r4, r7 */
1273 0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1274 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
1275 0x1a000004, /* bne 8154 <sp_32_done> */
1277 /* 00008140 <sp_32_cont>: */
1278 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1279 0x03a05080, /* moveq r5, #128 ; 0x80 */
1280 0x0a000001, /* beq 8154 <sp_32_done> */
1281 0xe2811004, /* add r1, r1, #4 ; 0x4 */
1282 0xeaffffe8, /* b 8100 <sp_32_code> */
1284 /* 00008154 <sp_32_done>: */
1285 0xeafffffe /* b 8154 <sp_32_done> */
1288 static const uint32_t word_16_code
[] = {
1289 /* 00008158 <sp_16_code>: */
1290 0xe0d050b2, /* ldrh r5, [r0], #2 */
1291 0xe1c890b0, /* strh r9, [r8] */
1292 0xe1cab0b0, /* strh r11, [r10] */
1293 0xe1c830b0, /* strh r3, [r8] */
1294 0xe1c150b0, /* strh r5, [r1] */
1295 0xe1a00000, /* nop (mov r0,r0) */
1297 /* 00008168 <sp_16_busy>: */
1298 0xe1d160b0, /* ldrh r6, [r1] */
1299 0xe0257006, /* eor r7, r5, r6 */
1300 0xe0147007, /* ands r7, r4, r7 */
1301 0x0a000007, /* beq 8198 <sp_16_cont> */
1302 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1303 0x0afffff9, /* beq 8168 <sp_16_busy> */
1304 0xe1d160b0, /* ldrh r6, [r1] */
1305 0xe0257006, /* eor r7, r5, r6 */
1306 0xe0147007, /* ands r7, r4, r7 */
1307 0x0a000001, /* beq 8198 <sp_16_cont> */
1308 0xe3a05000, /* mov r5, #0 ; 0x0 */
1309 0x1a000004, /* bne 81ac <sp_16_done> */
1311 /* 00008198 <sp_16_cont>: */
1312 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1313 0x03a05080, /* moveq r5, #128 ; 0x80 */
1314 0x0a000001, /* beq 81ac <sp_16_done> */
1315 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1316 0xeaffffe8, /* b 8158 <sp_16_code> */
1318 /* 000081ac <sp_16_done>: */
1319 0xeafffffe /* b 81ac <sp_16_done> */
1322 static const uint32_t word_16_code_dq7only
[] = {
1324 0xe0d050b2, /* ldrh r5, [r0], #2 */
1325 0xe1c890b0, /* strh r9, [r8] */
1326 0xe1cab0b0, /* strh r11, [r10] */
1327 0xe1c830b0, /* strh r3, [r8] */
1328 0xe1c150b0, /* strh r5, [r1] */
1329 0xe1a00000, /* nop (mov r0,r0) */
1332 0xe1d160b0, /* ldrh r6, [r1] */
1333 0xe0257006, /* eor r7, r5, r6 */
1334 0xe2177080, /* ands r7, #0x80 */
1335 0x1afffffb, /* bne 8168 <sp_16_busy> */
1337 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1338 0x03a05080, /* moveq r5, #128 ; 0x80 */
1339 0x0a000001, /* beq 81ac <sp_16_done> */
1340 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1341 0xeafffff0, /* b 8158 <sp_16_code> */
1343 /* 000081ac <sp_16_done>: */
1344 0xeafffffe /* b 81ac <sp_16_done> */
1347 static const uint32_t word_8_code
[] = {
1348 /* 000081b0 <sp_16_code_end>: */
1349 0xe4d05001, /* ldrb r5, [r0], #1 */
1350 0xe5c89000, /* strb r9, [r8] */
1351 0xe5cab000, /* strb r11, [r10] */
1352 0xe5c83000, /* strb r3, [r8] */
1353 0xe5c15000, /* strb r5, [r1] */
1354 0xe1a00000, /* nop (mov r0,r0) */
1356 /* 000081c0 <sp_8_busy>: */
1357 0xe5d16000, /* ldrb r6, [r1] */
1358 0xe0257006, /* eor r7, r5, r6 */
1359 0xe0147007, /* ands r7, r4, r7 */
1360 0x0a000007, /* beq 81f0 <sp_8_cont> */
1361 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1362 0x0afffff9, /* beq 81c0 <sp_8_busy> */
1363 0xe5d16000, /* ldrb r6, [r1] */
1364 0xe0257006, /* eor r7, r5, r6 */
1365 0xe0147007, /* ands r7, r4, r7 */
1366 0x0a000001, /* beq 81f0 <sp_8_cont> */
1367 0xe3a05000, /* mov r5, #0 ; 0x0 */
1368 0x1a000004, /* bne 8204 <sp_8_done> */
1370 /* 000081f0 <sp_8_cont>: */
1371 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1372 0x03a05080, /* moveq r5, #128 ; 0x80 */
1373 0x0a000001, /* beq 8204 <sp_8_done> */
1374 0xe2811001, /* add r1, r1, #1 ; 0x1 */
1375 0xeaffffe8, /* b 81b0 <sp_16_code_end> */
1377 /* 00008204 <sp_8_done>: */
1378 0xeafffffe /* b 8204 <sp_8_done> */
1381 armv4_5_info
.common_magic
= ARM_COMMON_MAGIC
;
1382 armv4_5_info
.core_mode
= ARM_MODE_SVC
;
1383 armv4_5_info
.core_state
= ARM_STATE_ARM
;
1385 int target_code_size
;
1386 const uint32_t *target_code_src
;
1388 switch (bank
->bus_width
)
1391 target_code_src
= word_8_code
;
1392 target_code_size
= sizeof(word_8_code
);
1395 /* Check for DQ5 support */
1396 if( cfi_info
->status_poll_mask
& (1 << 5) )
1398 target_code_src
= word_16_code
;
1399 target_code_size
= sizeof(word_16_code
);
1403 /* No DQ5 support. Use DQ7 DATA# polling only. */
1404 target_code_src
= word_16_code_dq7only
;
1405 target_code_size
= sizeof(word_16_code_dq7only
);
1409 target_code_src
= word_32_code
;
1410 target_code_size
= sizeof(word_32_code
);
1413 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
1414 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1417 /* flash write code */
1418 if (!cfi_info
->write_algorithm
)
1420 uint8_t *target_code
;
1422 /* convert bus-width dependent algorithm code to correct endiannes */
1423 target_code
= malloc(target_code_size
);
1424 cfi_fix_code_endian(target
, target_code
, target_code_src
, target_code_size
/ 4);
1426 /* allocate working area */
1427 retval
= target_alloc_working_area(target
, target_code_size
,
1428 &cfi_info
->write_algorithm
);
1429 if (retval
!= ERROR_OK
)
1435 /* write algorithm code to working area */
1436 if ((retval
= target_write_buffer(target
, cfi_info
->write_algorithm
->address
,
1437 target_code_size
, target_code
)) != ERROR_OK
)
1445 /* the following code still assumes target code is fixed 24*4 bytes */
1447 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
)
1450 if (buffer_size
<= 256)
1452 /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
1453 if (cfi_info
->write_algorithm
)
1454 target_free_working_area(target
, cfi_info
->write_algorithm
);
1456 LOG_WARNING("not enough working area available, can't do block memory writes");
1457 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1461 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1462 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1463 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1464 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1465 init_reg_param(®_params
[4], "r4", 32, PARAM_OUT
);
1466 init_reg_param(®_params
[5], "r5", 32, PARAM_IN
);
1467 init_reg_param(®_params
[6], "r8", 32, PARAM_OUT
);
1468 init_reg_param(®_params
[7], "r9", 32, PARAM_OUT
);
1469 init_reg_param(®_params
[8], "r10", 32, PARAM_OUT
);
1470 init_reg_param(®_params
[9], "r11", 32, PARAM_OUT
);
1474 uint32_t thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1476 retvaltemp
= target_write_buffer(target
, source
->address
, thisrun_count
, buffer
);
1478 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1479 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1480 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1481 buf_set_u32(reg_params
[3].value
, 0, 32, cfi_command_val(bank
, 0xA0));
1482 buf_set_u32(reg_params
[4].value
, 0, 32, cfi_command_val(bank
, 0x80));
1483 buf_set_u32(reg_params
[6].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock1
));
1484 buf_set_u32(reg_params
[7].value
, 0, 32, 0xaaaaaaaa);
1485 buf_set_u32(reg_params
[8].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock2
));
1486 buf_set_u32(reg_params
[9].value
, 0, 32, 0x55555555);
1488 retval
= target_run_algorithm(target
, 0, NULL
, 10, reg_params
,
1489 cfi_info
->write_algorithm
->address
,
1490 cfi_info
->write_algorithm
->address
+ ((target_code_size
) - 4),
1491 10000, &armv4_5_info
);
1493 status
= buf_get_u32(reg_params
[5].value
, 0, 32);
1495 if ((retval
!= ERROR_OK
) || (retvaltemp
!= ERROR_OK
) || status
!= 0x80)
1497 LOG_DEBUG("status: 0x%" PRIx32
, status
);
1498 exit_code
= ERROR_FLASH_OPERATION_FAILED
;
1502 buffer
+= thisrun_count
;
1503 address
+= thisrun_count
;
1504 count
-= thisrun_count
;
1507 target_free_all_working_areas(target
);
1509 destroy_reg_param(®_params
[0]);
1510 destroy_reg_param(®_params
[1]);
1511 destroy_reg_param(®_params
[2]);
1512 destroy_reg_param(®_params
[3]);
1513 destroy_reg_param(®_params
[4]);
1514 destroy_reg_param(®_params
[5]);
1515 destroy_reg_param(®_params
[6]);
1516 destroy_reg_param(®_params
[7]);
1517 destroy_reg_param(®_params
[8]);
1518 destroy_reg_param(®_params
[9]);
1523 static int cfi_intel_write_word(struct flash_bank
*bank
, uint8_t *word
, uint32_t address
)
1526 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1527 struct target
*target
= bank
->target
;
1529 cfi_intel_clear_status_register(bank
);
1530 if ((retval
= cfi_send_command(bank
, 0x40, address
)) != ERROR_OK
)
1535 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, word
)) != ERROR_OK
)
1540 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != 0x80)
1542 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
1547 LOG_ERROR("couldn't write word at base 0x%" PRIx32
", address %" PRIx32
, bank
->base
, address
);
1548 return ERROR_FLASH_OPERATION_FAILED
;
1554 static int cfi_intel_write_words(struct flash_bank
*bank
, uint8_t *word
, uint32_t wordcount
, uint32_t address
)
1557 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1558 struct target
*target
= bank
->target
;
1560 /* Calculate buffer size and boundary mask */
1561 uint32_t buffersize
= (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
1562 uint32_t buffermask
= buffersize
-1;
1563 uint32_t bufferwsize
;
1565 /* Check for valid range */
1566 if (address
& buffermask
)
1568 LOG_ERROR("Write address at base 0x%" PRIx32
", address %" PRIx32
" not aligned to 2^%d boundary",
1569 bank
->base
, address
, cfi_info
->max_buf_write_size
);
1570 return ERROR_FLASH_OPERATION_FAILED
;
1572 switch (bank
->chip_width
)
1574 case 4 : bufferwsize
= buffersize
/ 4; break;
1575 case 2 : bufferwsize
= buffersize
/ 2; break;
1576 case 1 : bufferwsize
= buffersize
; break;
1578 LOG_ERROR("Unsupported chip width %d", bank
->chip_width
);
1579 return ERROR_FLASH_OPERATION_FAILED
;
1582 bufferwsize
/=(bank
->bus_width
/ bank
->chip_width
);
1585 /* Check for valid size */
1586 if (wordcount
> bufferwsize
)
1588 LOG_ERROR("Number of data words %" PRId32
" exceeds available buffersize %" PRId32
, wordcount
, buffersize
);
1589 return ERROR_FLASH_OPERATION_FAILED
;
1592 /* Write to flash buffer */
1593 cfi_intel_clear_status_register(bank
);
1595 /* Initiate buffer operation _*/
1596 if ((retval
= cfi_send_command(bank
, 0xe8, address
)) != ERROR_OK
)
1600 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->buf_write_timeout_max
)) != 0x80)
1602 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
1607 LOG_ERROR("couldn't start buffer write operation at base 0x%" PRIx32
", address %" PRIx32
, bank
->base
, address
);
1608 return ERROR_FLASH_OPERATION_FAILED
;
1611 /* Write buffer wordcount-1 and data words */
1612 if ((retval
= cfi_send_command(bank
, bufferwsize
-1, address
)) != ERROR_OK
)
1617 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, bufferwsize
, word
)) != ERROR_OK
)
1622 /* Commit write operation */
1623 if ((retval
= cfi_send_command(bank
, 0xd0, address
)) != ERROR_OK
)
1627 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->buf_write_timeout_max
)) != 0x80)
1629 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
1634 LOG_ERROR("Buffer write at base 0x%" PRIx32
", address %" PRIx32
" failed.", bank
->base
, address
);
1635 return ERROR_FLASH_OPERATION_FAILED
;
1641 static int cfi_spansion_write_word(struct flash_bank
*bank
, uint8_t *word
, uint32_t address
)
1644 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1645 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
1646 struct target
*target
= bank
->target
;
1648 if ((retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
1653 if ((retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
))) != ERROR_OK
)
1658 if ((retval
= cfi_send_command(bank
, 0xa0, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
1663 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, word
)) != ERROR_OK
)
1668 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != ERROR_OK
)
1670 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
1675 LOG_ERROR("couldn't write word at base 0x%" PRIx32
", address %" PRIx32
, bank
->base
, address
);
1676 return ERROR_FLASH_OPERATION_FAILED
;
1682 static int cfi_spansion_write_words(struct flash_bank
*bank
, uint8_t *word
, uint32_t wordcount
, uint32_t address
)
1685 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1686 struct target
*target
= bank
->target
;
1687 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
1689 /* Calculate buffer size and boundary mask */
1690 uint32_t buffersize
= (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
1691 uint32_t buffermask
= buffersize
-1;
1692 uint32_t bufferwsize
;
1694 /* Check for valid range */
1695 if (address
& buffermask
)
1697 LOG_ERROR("Write address at base 0x%" PRIx32
", address %" PRIx32
" not aligned to 2^%d boundary", bank
->base
, address
, cfi_info
->max_buf_write_size
);
1698 return ERROR_FLASH_OPERATION_FAILED
;
1700 switch (bank
->chip_width
)
1702 case 4 : bufferwsize
= buffersize
/ 4; break;
1703 case 2 : bufferwsize
= buffersize
/ 2; break;
1704 case 1 : bufferwsize
= buffersize
; break;
1706 LOG_ERROR("Unsupported chip width %d", bank
->chip_width
);
1707 return ERROR_FLASH_OPERATION_FAILED
;
1710 bufferwsize
/=(bank
->bus_width
/ bank
->chip_width
);
1712 /* Check for valid size */
1713 if (wordcount
> bufferwsize
)
1715 LOG_ERROR("Number of data words %" PRId32
" exceeds available buffersize %" PRId32
, wordcount
, buffersize
);
1716 return ERROR_FLASH_OPERATION_FAILED
;
1720 if ((retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
1725 if ((retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
))) != ERROR_OK
)
1730 // Buffer load command
1731 if ((retval
= cfi_send_command(bank
, 0x25, address
)) != ERROR_OK
)
1736 /* Write buffer wordcount-1 and data words */
1737 if ((retval
= cfi_send_command(bank
, bufferwsize
-1, address
)) != ERROR_OK
)
1742 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, bufferwsize
, word
)) != ERROR_OK
)
1747 /* Commit write operation */
1748 if ((retval
= cfi_send_command(bank
, 0x29, address
)) != ERROR_OK
)
1753 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != ERROR_OK
)
1755 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
1760 LOG_ERROR("couldn't write block at base 0x%" PRIx32
", address %" PRIx32
", size %" PRIx32
, bank
->base
, address
, bufferwsize
);
1761 return ERROR_FLASH_OPERATION_FAILED
;
1767 static int cfi_write_word(struct flash_bank
*bank
, uint8_t *word
, uint32_t address
)
1769 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1771 switch (cfi_info
->pri_id
)
1775 return cfi_intel_write_word(bank
, word
, address
);
1778 return cfi_spansion_write_word(bank
, word
, address
);
1781 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1785 return ERROR_FLASH_OPERATION_FAILED
;
1788 static int cfi_write_words(struct flash_bank
*bank
, uint8_t *word
, uint32_t wordcount
, uint32_t address
)
1790 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1792 switch (cfi_info
->pri_id
)
1796 return cfi_intel_write_words(bank
, word
, wordcount
, address
);
1799 return cfi_spansion_write_words(bank
, word
, wordcount
, address
);
1802 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1806 return ERROR_FLASH_OPERATION_FAILED
;
1809 static int cfi_write(struct flash_bank
*bank
, uint8_t *buffer
, uint32_t offset
, uint32_t count
)
1811 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
1812 struct target
*target
= bank
->target
;
1813 uint32_t address
= bank
->base
+ offset
; /* address of first byte to be programmed */
1814 uint32_t write_p
, copy_p
;
1815 int align
; /* number of unaligned bytes */
1816 int blk_count
; /* number of bus_width bytes for block copy */
1817 uint8_t current_word
[CFI_MAX_BUS_WIDTH
* 4]; /* word (bus_width size) currently being programmed */
1821 if (bank
->target
->state
!= TARGET_HALTED
)
1823 LOG_ERROR("Target not halted");
1824 return ERROR_TARGET_NOT_HALTED
;
1827 if (offset
+ count
> bank
->size
)
1828 return ERROR_FLASH_DST_OUT_OF_BANK
;
1830 if (cfi_info
->qry
[0] != 'Q')
1831 return ERROR_FLASH_BANK_NOT_PROBED
;
1833 /* start at the first byte of the first word (bus_width size) */
1834 write_p
= address
& ~(bank
->bus_width
- 1);
1835 if ((align
= address
- write_p
) != 0)
1837 LOG_INFO("Fixup %d unaligned head bytes", align
);
1839 for (i
= 0; i
< bank
->bus_width
; i
++)
1840 current_word
[i
] = 0;
1843 /* copy bytes before the first write address */
1844 for (i
= 0; i
< align
; ++i
, ++copy_p
)
1847 if ((retval
= target_read_memory(target
, copy_p
, 1, 1, &byte
)) != ERROR_OK
)
1851 cfi_add_byte(bank
, current_word
, byte
);
1854 /* add bytes from the buffer */
1855 for (; (i
< bank
->bus_width
) && (count
> 0); i
++)
1857 cfi_add_byte(bank
, current_word
, *buffer
++);
1862 /* if the buffer is already finished, copy bytes after the last write address */
1863 for (; (count
== 0) && (i
< bank
->bus_width
); ++i
, ++copy_p
)
1866 if ((retval
= target_read_memory(target
, copy_p
, 1, 1, &byte
)) != ERROR_OK
)
1870 cfi_add_byte(bank
, current_word
, byte
);
1873 retval
= cfi_write_word(bank
, current_word
, write_p
);
1874 if (retval
!= ERROR_OK
)
1879 /* handle blocks of bus_size aligned bytes */
1880 blk_count
= count
& ~(bank
->bus_width
- 1); /* round down, leave tail bytes */
1881 switch (cfi_info
->pri_id
)
1883 /* try block writes (fails without working area) */
1886 retval
= cfi_intel_write_block(bank
, buffer
, write_p
, blk_count
);
1889 retval
= cfi_spansion_write_block(bank
, buffer
, write_p
, blk_count
);
1892 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1893 retval
= ERROR_FLASH_OPERATION_FAILED
;
1896 if (retval
== ERROR_OK
)
1898 /* Increment pointers and decrease count on succesful block write */
1899 buffer
+= blk_count
;
1900 write_p
+= blk_count
;
1905 if (retval
== ERROR_TARGET_RESOURCE_NOT_AVAILABLE
)
1907 //adjust buffersize for chip width
1908 uint32_t buffersize
= (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
1909 uint32_t buffermask
= buffersize
-1;
1910 uint32_t bufferwsize
;
1912 switch (bank
->chip_width
)
1914 case 4 : bufferwsize
= buffersize
/ 4; break;
1915 case 2 : bufferwsize
= buffersize
/ 2; break;
1916 case 1 : bufferwsize
= buffersize
; break;
1918 LOG_ERROR("Unsupported chip width %d", bank
->chip_width
);
1919 return ERROR_FLASH_OPERATION_FAILED
;
1922 bufferwsize
/=(bank
->bus_width
/ bank
->chip_width
);
1924 /* fall back to memory writes */
1925 while (count
>= (uint32_t)bank
->bus_width
)
1928 if ((write_p
& 0xff) == 0)
1930 LOG_INFO("Programming at %08" PRIx32
", count %08" PRIx32
" bytes remaining", write_p
, count
);
1933 if ((bufferwsize
> 0) && (count
>= buffersize
) && !(write_p
& buffermask
))
1935 retval
= cfi_write_words(bank
, buffer
, bufferwsize
, write_p
);
1936 if (retval
== ERROR_OK
)
1938 buffer
+= buffersize
;
1939 write_p
+= buffersize
;
1940 count
-= buffersize
;
1944 /* try the slow way? */
1947 for (i
= 0; i
< bank
->bus_width
; i
++)
1948 current_word
[i
] = 0;
1950 for (i
= 0; i
< bank
->bus_width
; i
++)
1952 cfi_add_byte(bank
, current_word
, *buffer
++);
1955 retval
= cfi_write_word(bank
, current_word
, write_p
);
1956 if (retval
!= ERROR_OK
)
1959 write_p
+= bank
->bus_width
;
1960 count
-= bank
->bus_width
;
1968 /* return to read array mode, so we can read from flash again for padding */
1969 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
1973 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
1978 /* handle unaligned tail bytes */
1981 LOG_INFO("Fixup %" PRId32
" unaligned tail bytes", count
);
1984 for (i
= 0; i
< bank
->bus_width
; i
++)
1985 current_word
[i
] = 0;
1987 for (i
= 0; (i
< bank
->bus_width
) && (count
> 0); ++i
, ++copy_p
)
1989 cfi_add_byte(bank
, current_word
, *buffer
++);
1992 for (; i
< bank
->bus_width
; ++i
, ++copy_p
)
1995 if ((retval
= target_read_memory(target
, copy_p
, 1, 1, &byte
)) != ERROR_OK
)
1999 cfi_add_byte(bank
, current_word
, byte
);
2001 retval
= cfi_write_word(bank
, current_word
, write_p
);
2002 if (retval
!= ERROR_OK
)
2006 /* return to read array mode */
2007 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
2011 return cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
2014 static void cfi_fixup_atmel_reversed_erase_regions(struct flash_bank
*bank
, void *param
)
2017 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2018 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2020 pri_ext
->_reversed_geometry
= 1;
2023 static void cfi_fixup_0002_erase_regions(struct flash_bank
*bank
, void *param
)
2026 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2027 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2030 if ((pri_ext
->_reversed_geometry
) || (pri_ext
->TopBottom
== 3))
2032 LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device");
2034 for (i
= 0; i
< cfi_info
->num_erase_regions
/ 2; i
++)
2036 int j
= (cfi_info
->num_erase_regions
- 1) - i
;
2039 swap
= cfi_info
->erase_region_info
[i
];
2040 cfi_info
->erase_region_info
[i
] = cfi_info
->erase_region_info
[j
];
2041 cfi_info
->erase_region_info
[j
] = swap
;
2046 static void cfi_fixup_0002_unlock_addresses(struct flash_bank
*bank
, void *param
)
2048 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2049 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2050 struct cfi_unlock_addresses
*unlock_addresses
= param
;
2052 pri_ext
->_unlock1
= unlock_addresses
->unlock1
;
2053 pri_ext
->_unlock2
= unlock_addresses
->unlock2
;
2057 static int cfi_query_string(struct flash_bank
*bank
, int address
)
2059 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2062 if ((retval
= cfi_send_command(bank
, 0x98, flash_address(bank
, 0, address
))) != ERROR_OK
)
2067 cfi_info
->qry
[0] = cfi_query_u8(bank
, 0, 0x10);
2068 cfi_info
->qry
[1] = cfi_query_u8(bank
, 0, 0x11);
2069 cfi_info
->qry
[2] = cfi_query_u8(bank
, 0, 0x12);
2071 LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2]);
2073 if ((cfi_info
->qry
[0] != 'Q') || (cfi_info
->qry
[1] != 'R') || (cfi_info
->qry
[2] != 'Y'))
2075 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
2079 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
2083 LOG_ERROR("Could not probe bank: no QRY");
2084 return ERROR_FLASH_BANK_INVALID
;
2090 static int cfi_probe(struct flash_bank
*bank
)
2092 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2093 struct target
*target
= bank
->target
;
2094 int num_sectors
= 0;
2097 uint32_t unlock1
= 0x555;
2098 uint32_t unlock2
= 0x2aa;
2101 if (bank
->target
->state
!= TARGET_HALTED
)
2103 LOG_ERROR("Target not halted");
2104 return ERROR_TARGET_NOT_HALTED
;
2107 cfi_info
->probed
= 0;
2109 /* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
2110 * while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
2112 if (cfi_info
->jedec_probe
)
2118 /* switch to read identifier codes mode ("AUTOSELECT") */
2119 if ((retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, unlock1
))) != ERROR_OK
)
2123 if ((retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, unlock2
))) != ERROR_OK
)
2127 if ((retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, unlock1
))) != ERROR_OK
)
2132 if (bank
->chip_width
== 1)
2134 uint8_t manufacturer
, device_id
;
2135 if ((retval
= target_read_u8(target
, flash_address(bank
, 0, 0x00), &manufacturer
)) != ERROR_OK
)
2139 if ((retval
= target_read_u8(target
, flash_address(bank
, 0, 0x01), &device_id
)) != ERROR_OK
)
2143 cfi_info
->manufacturer
= manufacturer
;
2144 cfi_info
->device_id
= device_id
;
2146 else if (bank
->chip_width
== 2)
2148 if ((retval
= target_read_u16(target
, flash_address(bank
, 0, 0x00), &cfi_info
->manufacturer
)) != ERROR_OK
)
2152 if ((retval
= target_read_u16(target
, flash_address(bank
, 0, 0x01), &cfi_info
->device_id
)) != ERROR_OK
)
2158 LOG_INFO("Flash Manufacturer/Device: 0x%04x 0x%04x", cfi_info
->manufacturer
, cfi_info
->device_id
);
2159 /* switch back to read array mode */
2160 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x00))) != ERROR_OK
)
2164 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x00))) != ERROR_OK
)
2169 /* check device/manufacturer ID for known non-CFI flashes. */
2170 cfi_fixup_non_cfi(bank
);
2172 /* query only if this is a CFI compatible flash,
2173 * otherwise the relevant info has already been filled in
2175 if (cfi_info
->not_cfi
== 0)
2179 /* enter CFI query mode
2180 * according to JEDEC Standard No. 68.01,
2181 * a single bus sequence with address = 0x55, data = 0x98 should put
2182 * the device into CFI query mode.
2184 * SST flashes clearly violate this, and we will consider them incompatbile for now
2187 retval
= cfi_query_string(bank
, 0x55);
2188 if (retval
!= ERROR_OK
)
2191 * Spansion S29WS-N CFI query fix is to try 0x555 if 0x55 fails. Should
2192 * be harmless enough:
2194 * http://www.infradead.org/pipermail/linux-mtd/2005-September/013618.html
2196 LOG_USER("Try workaround w/0x555 instead of 0x55 to get QRY.");
2197 retval
= cfi_query_string(bank
, 0x555);
2199 if (retval
!= ERROR_OK
)
2202 cfi_info
->pri_id
= cfi_query_u16(bank
, 0, 0x13);
2203 cfi_info
->pri_addr
= cfi_query_u16(bank
, 0, 0x15);
2204 cfi_info
->alt_id
= cfi_query_u16(bank
, 0, 0x17);
2205 cfi_info
->alt_addr
= cfi_query_u16(bank
, 0, 0x19);
2207 LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2], cfi_info
->pri_id
, cfi_info
->pri_addr
, cfi_info
->alt_id
, cfi_info
->alt_addr
);
2209 cfi_info
->vcc_min
= cfi_query_u8(bank
, 0, 0x1b);
2210 cfi_info
->vcc_max
= cfi_query_u8(bank
, 0, 0x1c);
2211 cfi_info
->vpp_min
= cfi_query_u8(bank
, 0, 0x1d);
2212 cfi_info
->vpp_max
= cfi_query_u8(bank
, 0, 0x1e);
2213 cfi_info
->word_write_timeout_typ
= cfi_query_u8(bank
, 0, 0x1f);
2214 cfi_info
->buf_write_timeout_typ
= cfi_query_u8(bank
, 0, 0x20);
2215 cfi_info
->block_erase_timeout_typ
= cfi_query_u8(bank
, 0, 0x21);
2216 cfi_info
->chip_erase_timeout_typ
= cfi_query_u8(bank
, 0, 0x22);
2217 cfi_info
->word_write_timeout_max
= cfi_query_u8(bank
, 0, 0x23);
2218 cfi_info
->buf_write_timeout_max
= cfi_query_u8(bank
, 0, 0x24);
2219 cfi_info
->block_erase_timeout_max
= cfi_query_u8(bank
, 0, 0x25);
2220 cfi_info
->chip_erase_timeout_max
= cfi_query_u8(bank
, 0, 0x26);
2222 LOG_DEBUG("Vcc min: %x.%x, Vcc max: %x.%x, Vpp min: %u.%x, Vpp max: %u.%x",
2223 (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
2224 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
2225 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
2226 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
2227 LOG_DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info
->word_write_timeout_typ
, 1 << cfi_info
->buf_write_timeout_typ
,
2228 1 << cfi_info
->block_erase_timeout_typ
, 1 << cfi_info
->chip_erase_timeout_typ
);
2229 LOG_DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
2230 (1 << cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
2231 (1 << cfi_info
->block_erase_timeout_max
) * (1 << cfi_info
->block_erase_timeout_typ
),
2232 (1 << cfi_info
->chip_erase_timeout_max
) * (1 << cfi_info
->chip_erase_timeout_typ
));
2234 cfi_info
->dev_size
= 1 << cfi_query_u8(bank
, 0, 0x27);
2235 cfi_info
->interface_desc
= cfi_query_u16(bank
, 0, 0x28);
2236 cfi_info
->max_buf_write_size
= cfi_query_u16(bank
, 0, 0x2a);
2237 cfi_info
->num_erase_regions
= cfi_query_u8(bank
, 0, 0x2c);
2239 LOG_DEBUG("size: 0x%" PRIx32
", interface desc: %i, max buffer write size: %x", cfi_info
->dev_size
, cfi_info
->interface_desc
, (1 << cfi_info
->max_buf_write_size
));
2241 if (cfi_info
->num_erase_regions
)
2243 cfi_info
->erase_region_info
= malloc(4 * cfi_info
->num_erase_regions
);
2244 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2246 cfi_info
->erase_region_info
[i
] = cfi_query_u32(bank
, 0, 0x2d + (4 * i
));
2247 LOG_DEBUG("erase region[%i]: %" PRIu32
" blocks of size 0x%" PRIx32
"",
2249 (cfi_info
->erase_region_info
[i
] & 0xffff) + 1,
2250 (cfi_info
->erase_region_info
[i
] >> 16) * 256);
2255 cfi_info
->erase_region_info
= NULL
;
2258 /* We need to read the primary algorithm extended query table before calculating
2259 * the sector layout to be able to apply fixups
2261 switch (cfi_info
->pri_id
)
2263 /* Intel command set (standard and extended) */
2266 cfi_read_intel_pri_ext(bank
);
2268 /* AMD/Spansion, Atmel, ... command set */
2270 cfi_info
->status_poll_mask
= CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7
; /* default for all CFI flashs */
2271 cfi_read_0002_pri_ext(bank
);
2274 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2278 /* return to read array mode
2279 * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
2281 if ((retval
= cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
2285 if ((retval
= cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0))) != ERROR_OK
)
2289 } /* end CFI case */
2291 /* apply fixups depending on the primary command set */
2292 switch (cfi_info
->pri_id
)
2294 /* Intel command set (standard and extended) */
2297 cfi_fixup(bank
, cfi_0001_fixups
);
2299 /* AMD/Spansion, Atmel, ... command set */
2301 cfi_fixup(bank
, cfi_0002_fixups
);
2304 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2308 if ((cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
) != bank
->size
)
2310 LOG_WARNING("configuration specifies 0x%" PRIx32
" size, but a 0x%" PRIx32
" size flash was found", bank
->size
, cfi_info
->dev_size
);
2313 if (cfi_info
->num_erase_regions
== 0)
2315 /* a device might have only one erase block, spanning the whole device */
2316 bank
->num_sectors
= 1;
2317 bank
->sectors
= malloc(sizeof(struct flash_sector
));
2319 bank
->sectors
[sector
].offset
= 0x0;
2320 bank
->sectors
[sector
].size
= bank
->size
;
2321 bank
->sectors
[sector
].is_erased
= -1;
2322 bank
->sectors
[sector
].is_protected
= -1;
2326 uint32_t offset
= 0;
2328 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2330 num_sectors
+= (cfi_info
->erase_region_info
[i
] & 0xffff) + 1;
2333 bank
->num_sectors
= num_sectors
;
2334 bank
->sectors
= malloc(sizeof(struct flash_sector
) * num_sectors
);
2336 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2339 for (j
= 0; j
< (cfi_info
->erase_region_info
[i
] & 0xffff) + 1; j
++)
2341 bank
->sectors
[sector
].offset
= offset
;
2342 bank
->sectors
[sector
].size
= ((cfi_info
->erase_region_info
[i
] >> 16) * 256) * bank
->bus_width
/ bank
->chip_width
;
2343 offset
+= bank
->sectors
[sector
].size
;
2344 bank
->sectors
[sector
].is_erased
= -1;
2345 bank
->sectors
[sector
].is_protected
= -1;
2349 if (offset
!= (cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
))
2351 LOG_WARNING("CFI size is 0x%" PRIx32
", but total sector size is 0x%" PRIx32
"", \
2352 (cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
), offset
);
2356 cfi_info
->probed
= 1;
2361 static int cfi_auto_probe(struct flash_bank
*bank
)
2363 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2364 if (cfi_info
->probed
)
2366 return cfi_probe(bank
);
2370 static int cfi_intel_protect_check(struct flash_bank
*bank
)
2373 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2374 struct cfi_intel_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2377 /* check if block lock bits are supported on this device */
2378 if (!(pri_ext
->blk_status_reg_mask
& 0x1))
2379 return ERROR_FLASH_OPERATION_FAILED
;
2381 if ((retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, 0x55))) != ERROR_OK
)
2386 for (i
= 0; i
< bank
->num_sectors
; i
++)
2388 uint8_t block_status
= cfi_get_u8(bank
, i
, 0x2);
2390 if (block_status
& 1)
2391 bank
->sectors
[i
].is_protected
= 1;
2393 bank
->sectors
[i
].is_protected
= 0;
2396 return cfi_send_command(bank
, 0xff, flash_address(bank
, 0, 0x0));
2399 static int cfi_spansion_protect_check(struct flash_bank
*bank
)
2402 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2403 struct cfi_spansion_pri_ext
*pri_ext
= cfi_info
->pri_ext
;
2406 if ((retval
= cfi_send_command(bank
, 0xaa, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
2411 if ((retval
= cfi_send_command(bank
, 0x55, flash_address(bank
, 0, pri_ext
->_unlock2
))) != ERROR_OK
)
2416 if ((retval
= cfi_send_command(bank
, 0x90, flash_address(bank
, 0, pri_ext
->_unlock1
))) != ERROR_OK
)
2421 for (i
= 0; i
< bank
->num_sectors
; i
++)
2423 uint8_t block_status
= cfi_get_u8(bank
, i
, 0x2);
2425 if (block_status
& 1)
2426 bank
->sectors
[i
].is_protected
= 1;
2428 bank
->sectors
[i
].is_protected
= 0;
2431 return cfi_send_command(bank
, 0xf0, flash_address(bank
, 0, 0x0));
2434 static int cfi_protect_check(struct flash_bank
*bank
)
2436 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2438 if (bank
->target
->state
!= TARGET_HALTED
)
2440 LOG_ERROR("Target not halted");
2441 return ERROR_TARGET_NOT_HALTED
;
2444 if (cfi_info
->qry
[0] != 'Q')
2445 return ERROR_FLASH_BANK_NOT_PROBED
;
2447 switch (cfi_info
->pri_id
)
2451 return cfi_intel_protect_check(bank
);
2454 return cfi_spansion_protect_check(bank
);
2457 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2464 static int cfi_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
2467 struct cfi_flash_bank
*cfi_info
= bank
->driver_priv
;
2469 if (cfi_info
->qry
[0] == (char)-1)
2471 printed
= snprintf(buf
, buf_size
, "\ncfi flash bank not probed yet\n");
2475 if (cfi_info
->not_cfi
== 0)
2476 printed
= snprintf(buf
, buf_size
, "\ncfi information:\n");
2478 printed
= snprintf(buf
, buf_size
, "\nnon-cfi flash:\n");
2480 buf_size
-= printed
;
2482 printed
= snprintf(buf
, buf_size
, "\nmfr: 0x%4.4x, id:0x%4.4x\n",
2483 cfi_info
->manufacturer
, cfi_info
->device_id
);
2485 buf_size
-= printed
;
2487 if (cfi_info
->not_cfi
== 0)
2489 printed
= snprintf(buf
, buf_size
, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2], cfi_info
->pri_id
, cfi_info
->pri_addr
, cfi_info
->alt_id
, cfi_info
->alt_addr
);
2491 buf_size
-= printed
;
2493 printed
= snprintf(buf
, buf_size
, "Vcc min: %x.%x, Vcc max: %x.%x, Vpp min: %u.%x, Vpp max: %u.%x\n",
2494 (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
2495 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
2496 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
2497 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
2499 buf_size
-= printed
;
2501 printed
= snprintf(buf
, buf_size
, "typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u\n",
2502 1 << cfi_info
->word_write_timeout_typ
,
2503 1 << cfi_info
->buf_write_timeout_typ
,
2504 1 << cfi_info
->block_erase_timeout_typ
,
2505 1 << cfi_info
->chip_erase_timeout_typ
);
2507 buf_size
-= printed
;
2509 printed
= snprintf(buf
, buf_size
, "max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u\n",
2510 (1 << cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
2511 (1 << cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
2512 (1 << cfi_info
->block_erase_timeout_max
) * (1 << cfi_info
->block_erase_timeout_typ
),
2513 (1 << cfi_info
->chip_erase_timeout_max
) * (1 << cfi_info
->chip_erase_timeout_typ
));
2515 buf_size
-= printed
;
2517 printed
= snprintf(buf
, buf_size
, "size: 0x%" PRIx32
", interface desc: %i, max buffer write size: %x\n",
2519 cfi_info
->interface_desc
,
2520 1 << cfi_info
->max_buf_write_size
);
2522 buf_size
-= printed
;
2524 switch (cfi_info
->pri_id
)
2528 cfi_intel_info(bank
, buf
, buf_size
);
2531 cfi_spansion_info(bank
, buf
, buf_size
);
2534 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2542 struct flash_driver cfi_flash
= {
2544 .flash_bank_command
= cfi_flash_bank_command
,
2546 .protect
= cfi_protect
,
2549 .auto_probe
= cfi_auto_probe
,
2550 .erase_check
= default_flash_blank_check
,
2551 .protect_check
= cfi_protect_check
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)