1 /***************************************************************************
2 * Copyright (C) 2007 by Dominic Rath <Dominic.Rath@gmx.de> *
3 * Copyright (C) 2002 Thomas Gleixner <tglx@linutronix.de> *
4 * Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net> *
6 * Partially based on drivers/mtd/nand_ids.c from Linux. *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program; if not, write to the *
20 * Free Software Foundation, Inc., *
21 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
22 ***************************************************************************/
29 /* configured NAND devices and NAND Flash command handler */
30 struct nand_device
*nand_devices
= NULL
;
32 void nand_device_add(struct nand_device
*c
)
35 struct nand_device
*p
= nand_devices
;
36 while (p
&& p
->next
) p
= p
->next
;
45 * Name, ID code, pagesize, chipsize in MegaByte, eraseblock size,
48 * Pagesize; 0, 256, 512
49 * 0 get this information from the extended chip ID
50 * 256 256 Byte page size
51 * 512 512 Byte page size
53 static struct nand_info nand_flash_ids
[] =
55 /* start "museum" IDs */
56 {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
57 {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
58 {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
59 {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
60 {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
61 {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
62 {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
63 {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
64 {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
65 {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
67 {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
68 {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
69 {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16
},
70 {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16
},
71 /* end "museum" IDs */
73 {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
74 {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
75 {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16
},
76 {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16
},
78 {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
79 {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
80 {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16
},
81 {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16
},
83 {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
84 {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
85 {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16
},
86 {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16
},
88 {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
89 {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
90 {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
91 {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16
},
92 {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16
},
93 {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16
},
94 {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16
},
96 {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
98 {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS
},
99 {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS
},
100 {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16
},
101 {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16
},
103 {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS
},
104 {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS
},
105 {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16
},
106 {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16
},
108 {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS
},
109 {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, LP_OPTIONS
},
110 {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, LP_OPTIONS16
},
111 {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, LP_OPTIONS16
},
113 {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, LP_OPTIONS
},
114 {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, LP_OPTIONS
},
115 {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, LP_OPTIONS16
},
116 {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, LP_OPTIONS16
},
118 {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS
},
119 {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS
},
120 {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16
},
121 {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16
},
123 {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, LP_OPTIONS
},
124 {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, LP_OPTIONS
},
125 {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16
},
126 {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16
},
128 {NULL
, 0, 0, 0, 0, 0 }
131 /* Manufacturer ID list
133 static struct nand_manufacturer nand_manuf_ids
[] =
136 {NAND_MFR_TOSHIBA
, "Toshiba"},
137 {NAND_MFR_SAMSUNG
, "Samsung"},
138 {NAND_MFR_FUJITSU
, "Fujitsu"},
139 {NAND_MFR_NATIONAL
, "National"},
140 {NAND_MFR_RENESAS
, "Renesas"},
141 {NAND_MFR_STMICRO
, "ST Micro"},
142 {NAND_MFR_HYNIX
, "Hynix"},
143 {NAND_MFR_MICRON
, "Micron"},
148 * Define default oob placement schemes for large and small page devices
152 static struct nand_ecclayout nand_oob_8
= {
163 struct nand_device
*get_nand_device_by_name(const char *name
)
165 unsigned requested
= get_flash_name_index(name
);
168 struct nand_device
*nand
;
169 for (nand
= nand_devices
; NULL
!= nand
; nand
= nand
->next
)
171 if (strcmp(nand
->name
, name
) == 0)
173 if (!flash_driver_name_matches(nand
->controller
->name
, name
))
175 if (++found
< requested
)
182 struct nand_device
*get_nand_device_by_num(int num
)
184 struct nand_device
*p
;
187 for (p
= nand_devices
; p
; p
= p
->next
)
198 COMMAND_HELPER(nand_command_get_device
, unsigned name_index
,
199 struct nand_device
**nand
)
201 const char *str
= CMD_ARGV
[name_index
];
202 *nand
= get_nand_device_by_name(str
);
207 COMMAND_PARSE_NUMBER(uint
, str
, num
);
208 *nand
= get_nand_device_by_num(num
);
210 command_print(CMD_CTX
, "NAND flash device '%s' not found", str
);
211 return ERROR_INVALID_ARGUMENTS
;
216 int nand_build_bbt(struct nand_device
*nand
, int first
, int last
)
222 if ((first
< 0) || (first
>= nand
->num_blocks
))
225 if ((last
>= nand
->num_blocks
) || (last
== -1))
226 last
= nand
->num_blocks
- 1;
228 for (i
= first
; i
< last
; i
++)
230 nand_read_page(nand
, page
, NULL
, 0, oob
, 6);
232 if (((nand
->device
->options
& NAND_BUSWIDTH_16
) && ((oob
[0] & oob
[1]) != 0xff))
233 || (((nand
->page_size
== 512) && (oob
[5] != 0xff)) ||
234 ((nand
->page_size
== 2048) && (oob
[0] != 0xff))))
236 LOG_WARNING("bad block: %i", i
);
237 nand
->blocks
[i
].is_bad
= 1;
241 nand
->blocks
[i
].is_bad
= 0;
244 page
+= (nand
->erase_size
/ nand
->page_size
);
250 int nand_read_status(struct nand_device
*nand
, uint8_t *status
)
253 return ERROR_NAND_DEVICE_NOT_PROBED
;
255 /* Send read status command */
256 nand
->controller
->command(nand
, NAND_CMD_STATUS
);
261 if (nand
->device
->options
& NAND_BUSWIDTH_16
)
264 nand
->controller
->read_data(nand
, &data
);
265 *status
= data
& 0xff;
269 nand
->controller
->read_data(nand
, status
);
275 static int nand_poll_ready(struct nand_device
*nand
, int timeout
)
279 nand
->controller
->command(nand
, NAND_CMD_STATUS
);
281 if (nand
->device
->options
& NAND_BUSWIDTH_16
) {
283 nand
->controller
->read_data(nand
, &data
);
284 status
= data
& 0xff;
286 nand
->controller
->read_data(nand
, &status
);
288 if (status
& NAND_STATUS_READY
)
293 return (status
& NAND_STATUS_READY
) != 0;
296 int nand_probe(struct nand_device
*nand
)
298 uint8_t manufacturer_id
, device_id
;
303 /* clear device data */
305 nand
->manufacturer
= NULL
;
307 /* clear device parameters */
309 nand
->address_cycles
= 0;
311 nand
->erase_size
= 0;
313 /* initialize controller (device parameters are zero, use controller default) */
314 if ((retval
= nand
->controller
->init(nand
) != ERROR_OK
))
318 case ERROR_NAND_OPERATION_FAILED
:
319 LOG_DEBUG("controller initialization failed");
320 return ERROR_NAND_OPERATION_FAILED
;
321 case ERROR_NAND_OPERATION_NOT_SUPPORTED
:
322 LOG_ERROR("BUG: controller reported that it doesn't support default parameters");
323 return ERROR_NAND_OPERATION_FAILED
;
325 LOG_ERROR("BUG: unknown controller initialization failure");
326 return ERROR_NAND_OPERATION_FAILED
;
330 nand
->controller
->command(nand
, NAND_CMD_RESET
);
331 nand
->controller
->reset(nand
);
333 nand
->controller
->command(nand
, NAND_CMD_READID
);
334 nand
->controller
->address(nand
, 0x0);
336 if (nand
->bus_width
== 8)
338 nand
->controller
->read_data(nand
, &manufacturer_id
);
339 nand
->controller
->read_data(nand
, &device_id
);
344 nand
->controller
->read_data(nand
, &data_buf
);
345 manufacturer_id
= data_buf
& 0xff;
346 nand
->controller
->read_data(nand
, &data_buf
);
347 device_id
= data_buf
& 0xff;
350 for (i
= 0; nand_flash_ids
[i
].name
; i
++)
352 if (nand_flash_ids
[i
].id
== device_id
)
354 nand
->device
= &nand_flash_ids
[i
];
359 for (i
= 0; nand_manuf_ids
[i
].name
; i
++)
361 if (nand_manuf_ids
[i
].id
== manufacturer_id
)
363 nand
->manufacturer
= &nand_manuf_ids
[i
];
368 if (!nand
->manufacturer
)
370 nand
->manufacturer
= &nand_manuf_ids
[0];
371 nand
->manufacturer
->id
= manufacturer_id
;
376 LOG_ERROR("unknown NAND flash device found, manufacturer id: 0x%2.2x device id: 0x%2.2x",
377 manufacturer_id
, device_id
);
378 return ERROR_NAND_OPERATION_FAILED
;
381 LOG_DEBUG("found %s (%s)", nand
->device
->name
, nand
->manufacturer
->name
);
383 /* initialize device parameters */
386 if (nand
->device
->options
& NAND_BUSWIDTH_16
)
387 nand
->bus_width
= 16;
391 /* Do we need extended device probe information? */
392 if (nand
->device
->page_size
== 0 ||
393 nand
->device
->erase_size
== 0)
395 if (nand
->bus_width
== 8)
397 nand
->controller
->read_data(nand
, id_buff
+ 3);
398 nand
->controller
->read_data(nand
, id_buff
+ 4);
399 nand
->controller
->read_data(nand
, id_buff
+ 5);
405 nand
->controller
->read_data(nand
, &data_buf
);
406 id_buff
[3] = data_buf
;
408 nand
->controller
->read_data(nand
, &data_buf
);
409 id_buff
[4] = data_buf
;
411 nand
->controller
->read_data(nand
, &data_buf
);
412 id_buff
[5] = data_buf
>> 8;
417 if (nand
->device
->page_size
== 0)
419 nand
->page_size
= 1 << (10 + (id_buff
[4] & 3));
421 else if (nand
->device
->page_size
== 256)
423 LOG_ERROR("NAND flashes with 256 byte pagesize are not supported");
424 return ERROR_NAND_OPERATION_FAILED
;
428 nand
->page_size
= nand
->device
->page_size
;
431 /* number of address cycles */
432 if (nand
->page_size
<= 512)
434 /* small page devices */
435 if (nand
->device
->chip_size
<= 32)
436 nand
->address_cycles
= 3;
437 else if (nand
->device
->chip_size
<= 8*1024)
438 nand
->address_cycles
= 4;
441 LOG_ERROR("BUG: small page NAND device with more than 8 GiB encountered");
442 nand
->address_cycles
= 5;
447 /* large page devices */
448 if (nand
->device
->chip_size
<= 128)
449 nand
->address_cycles
= 4;
450 else if (nand
->device
->chip_size
<= 32*1024)
451 nand
->address_cycles
= 5;
454 LOG_ERROR("BUG: large page NAND device with more than 32 GiB encountered");
455 nand
->address_cycles
= 6;
460 if (nand
->device
->erase_size
== 0)
462 switch ((id_buff
[4] >> 4) & 3) {
464 nand
->erase_size
= 64 << 10;
467 nand
->erase_size
= 128 << 10;
470 nand
->erase_size
= 256 << 10;
473 nand
->erase_size
=512 << 10;
479 nand
->erase_size
= nand
->device
->erase_size
;
482 /* initialize controller, but leave parameters at the controllers default */
483 if ((retval
= nand
->controller
->init(nand
) != ERROR_OK
))
487 case ERROR_NAND_OPERATION_FAILED
:
488 LOG_DEBUG("controller initialization failed");
489 return ERROR_NAND_OPERATION_FAILED
;
490 case ERROR_NAND_OPERATION_NOT_SUPPORTED
:
491 LOG_ERROR("controller doesn't support requested parameters (buswidth: %i, address cycles: %i, page size: %i)",
492 nand
->bus_width
, nand
->address_cycles
, nand
->page_size
);
493 return ERROR_NAND_OPERATION_FAILED
;
495 LOG_ERROR("BUG: unknown controller initialization failure");
496 return ERROR_NAND_OPERATION_FAILED
;
500 nand
->num_blocks
= (nand
->device
->chip_size
* 1024) / (nand
->erase_size
/ 1024);
501 nand
->blocks
= malloc(sizeof(struct nand_block
) * nand
->num_blocks
);
503 for (i
= 0; i
< nand
->num_blocks
; i
++)
505 nand
->blocks
[i
].size
= nand
->erase_size
;
506 nand
->blocks
[i
].offset
= i
* nand
->erase_size
;
507 nand
->blocks
[i
].is_erased
= -1;
508 nand
->blocks
[i
].is_bad
= -1;
514 int nand_erase(struct nand_device
*nand
, int first_block
, int last_block
)
522 return ERROR_NAND_DEVICE_NOT_PROBED
;
524 if ((first_block
< 0) || (last_block
> nand
->num_blocks
))
525 return ERROR_INVALID_ARGUMENTS
;
527 /* make sure we know if a block is bad before erasing it */
528 for (i
= first_block
; i
<= last_block
; i
++)
530 if (nand
->blocks
[i
].is_bad
== -1)
532 nand_build_bbt(nand
, i
, last_block
);
537 for (i
= first_block
; i
<= last_block
; i
++)
539 /* Send erase setup command */
540 nand
->controller
->command(nand
, NAND_CMD_ERASE1
);
542 page
= i
* (nand
->erase_size
/ nand
->page_size
);
544 /* Send page address */
545 if (nand
->page_size
<= 512)
548 nand
->controller
->address(nand
, page
& 0xff);
549 nand
->controller
->address(nand
, (page
>> 8) & 0xff);
551 /* 3rd cycle only on devices with more than 32 MiB */
552 if (nand
->address_cycles
>= 4)
553 nand
->controller
->address(nand
, (page
>> 16) & 0xff);
555 /* 4th cycle only on devices with more than 8 GiB */
556 if (nand
->address_cycles
>= 5)
557 nand
->controller
->address(nand
, (page
>> 24) & 0xff);
562 nand
->controller
->address(nand
, page
& 0xff);
563 nand
->controller
->address(nand
, (page
>> 8) & 0xff);
565 /* 3rd cycle only on devices with more than 128 MiB */
566 if (nand
->address_cycles
>= 5)
567 nand
->controller
->address(nand
, (page
>> 16) & 0xff);
570 /* Send erase confirm command */
571 nand
->controller
->command(nand
, NAND_CMD_ERASE2
);
573 retval
= nand
->controller
->nand_ready
?
574 nand
->controller
->nand_ready(nand
, 1000) :
575 nand_poll_ready(nand
, 1000);
577 LOG_ERROR("timeout waiting for NAND flash block erase to complete");
578 return ERROR_NAND_OPERATION_TIMEOUT
;
581 if ((retval
= nand_read_status(nand
, &status
)) != ERROR_OK
)
583 LOG_ERROR("couldn't read status");
584 return ERROR_NAND_OPERATION_FAILED
;
589 LOG_ERROR("didn't erase %sblock %d; status: 0x%2.2x",
590 (nand
->blocks
[i
].is_bad
== 1)
593 /* continue; other blocks might still be erasable */
596 nand
->blocks
[i
].is_erased
= 1;
603 static int nand_read_plain(struct nand_device
*nand
, uint32_t address
, uint8_t *data
, uint32_t data_size
)
608 return ERROR_NAND_DEVICE_NOT_PROBED
;
610 if (address
% nand
->page_size
)
612 LOG_ERROR("reads need to be page aligned");
613 return ERROR_NAND_OPERATION_FAILED
;
616 page
= malloc(nand
->page_size
);
618 while (data_size
> 0)
620 uint32_t thisrun_size
= (data_size
> nand
->page_size
) ? nand
->page_size
: data_size
;
621 uint32_t page_address
;
624 page_address
= address
/ nand
->page_size
;
626 nand_read_page(nand
, page_address
, page
, nand
->page_size
, NULL
, 0);
628 memcpy(data
, page
, thisrun_size
);
630 address
+= thisrun_size
;
631 data
+= thisrun_size
;
632 data_size
-= thisrun_size
;
640 static int nand_write_plain(struct nand_device
*nand
, uint32_t address
, uint8_t *data
, uint32_t data_size
)
645 return ERROR_NAND_DEVICE_NOT_PROBED
;
647 if (address
% nand
->page_size
)
649 LOG_ERROR("writes need to be page aligned");
650 return ERROR_NAND_OPERATION_FAILED
;
653 page
= malloc(nand
->page_size
);
655 while (data_size
> 0)
657 uint32_t thisrun_size
= (data_size
> nand
->page_size
) ? nand
->page_size
: data_size
;
658 uint32_t page_address
;
660 memset(page
, 0xff, nand
->page_size
);
661 memcpy(page
, data
, thisrun_size
);
663 page_address
= address
/ nand
->page_size
;
665 nand_write_page(nand
, page_address
, page
, nand
->page_size
, NULL
, 0);
667 address
+= thisrun_size
;
668 data
+= thisrun_size
;
669 data_size
-= thisrun_size
;
678 int nand_write_page(struct nand_device
*nand
, uint32_t page
, uint8_t *data
, uint32_t data_size
, uint8_t *oob
, uint32_t oob_size
)
683 return ERROR_NAND_DEVICE_NOT_PROBED
;
685 block
= page
/ (nand
->erase_size
/ nand
->page_size
);
686 if (nand
->blocks
[block
].is_erased
== 1)
687 nand
->blocks
[block
].is_erased
= 0;
689 if (nand
->use_raw
|| nand
->controller
->write_page
== NULL
)
690 return nand_write_page_raw(nand
, page
, data
, data_size
, oob
, oob_size
);
692 return nand
->controller
->write_page(nand
, page
, data
, data_size
, oob
, oob_size
);
695 int nand_read_page(struct nand_device
*nand
, uint32_t page
,
696 uint8_t *data
, uint32_t data_size
,
697 uint8_t *oob
, uint32_t oob_size
)
700 return ERROR_NAND_DEVICE_NOT_PROBED
;
702 if (nand
->use_raw
|| nand
->controller
->read_page
== NULL
)
703 return nand_read_page_raw(nand
, page
, data
, data_size
, oob
, oob_size
);
705 return nand
->controller
->read_page(nand
, page
, data
, data_size
, oob
, oob_size
);
708 int nand_page_command(struct nand_device
*nand
, uint32_t page
,
709 uint8_t cmd
, bool oob_only
)
712 return ERROR_NAND_DEVICE_NOT_PROBED
;
714 if (oob_only
&& NAND_CMD_READ0
== cmd
&& nand
->page_size
<= 512)
715 cmd
= NAND_CMD_READOOB
;
717 nand
->controller
->command(nand
, cmd
);
719 if (nand
->page_size
<= 512) {
720 /* small page device */
722 /* column (always 0, we start at the beginning of a page/OOB area) */
723 nand
->controller
->address(nand
, 0x0);
726 nand
->controller
->address(nand
, page
& 0xff);
727 nand
->controller
->address(nand
, (page
>> 8) & 0xff);
729 /* 4th cycle only on devices with more than 32 MiB */
730 if (nand
->address_cycles
>= 4)
731 nand
->controller
->address(nand
, (page
>> 16) & 0xff);
733 /* 5th cycle only on devices with more than 8 GiB */
734 if (nand
->address_cycles
>= 5)
735 nand
->controller
->address(nand
, (page
>> 24) & 0xff);
737 /* large page device */
739 /* column (0 when we start at the beginning of a page,
740 * or 2048 for the beginning of OOB area)
742 nand
->controller
->address(nand
, 0x0);
744 nand
->controller
->address(nand
, 0x8);
746 nand
->controller
->address(nand
, 0x0);
749 nand
->controller
->address(nand
, page
& 0xff);
750 nand
->controller
->address(nand
, (page
>> 8) & 0xff);
752 /* 5th cycle only on devices with more than 128 MiB */
753 if (nand
->address_cycles
>= 5)
754 nand
->controller
->address(nand
, (page
>> 16) & 0xff);
756 /* large page devices need a start command if reading */
757 if (NAND_CMD_READ0
== cmd
)
758 nand
->controller
->command(nand
, NAND_CMD_READSTART
);
761 if (nand
->controller
->nand_ready
) {
762 if (!nand
->controller
->nand_ready(nand
, 100))
763 return ERROR_NAND_OPERATION_TIMEOUT
;
771 int nand_read_data_page(struct nand_device
*nand
, uint8_t *data
, uint32_t size
)
773 int retval
= ERROR_NAND_NO_BUFFER
;
775 if (nand
->controller
->read_block_data
!= NULL
)
776 retval
= (nand
->controller
->read_block_data
)(nand
, data
, size
);
778 if (ERROR_NAND_NO_BUFFER
== retval
) {
780 int incr
= (nand
->device
->options
& NAND_BUSWIDTH_16
) ? 2 : 1;
783 for (i
= 0; retval
== ERROR_OK
&& i
< size
; i
+= incr
) {
784 retval
= nand
->controller
->read_data(nand
, data
);
792 int nand_read_page_raw(struct nand_device
*nand
, uint32_t page
,
793 uint8_t *data
, uint32_t data_size
,
794 uint8_t *oob
, uint32_t oob_size
)
798 retval
= nand_page_command(nand
, page
, NAND_CMD_READ0
, !data
);
799 if (ERROR_OK
!= retval
)
803 nand_read_data_page(nand
, data
, data_size
);
806 nand_read_data_page(nand
, oob
, oob_size
);
811 int nand_write_page_raw(struct nand_device
*nand
, uint32_t page
, uint8_t *data
, uint32_t data_size
, uint8_t *oob
, uint32_t oob_size
)
817 retval
= nand_page_command(nand
, page
, NAND_CMD_SEQIN
, !data
);
818 if (ERROR_OK
!= retval
)
823 if (nand
->controller
->write_block_data
!= NULL
)
824 (nand
->controller
->write_block_data
)(nand
, data
, data_size
);
827 for (i
= 0; i
< data_size
;)
829 if (nand
->device
->options
& NAND_BUSWIDTH_16
)
831 uint16_t data_buf
= le_to_h_u16(data
);
832 nand
->controller
->write_data(nand
, data_buf
);
838 nand
->controller
->write_data(nand
, *data
);
848 if (nand
->controller
->write_block_data
!= NULL
)
849 (nand
->controller
->write_block_data
)(nand
, oob
, oob_size
);
852 for (i
= 0; i
< oob_size
;)
854 if (nand
->device
->options
& NAND_BUSWIDTH_16
)
856 uint16_t oob_buf
= le_to_h_u16(data
);
857 nand
->controller
->write_data(nand
, oob_buf
);
863 nand
->controller
->write_data(nand
, *oob
);
871 nand
->controller
->command(nand
, NAND_CMD_PAGEPROG
);
873 retval
= nand
->controller
->nand_ready
?
874 nand
->controller
->nand_ready(nand
, 100) :
875 nand_poll_ready(nand
, 100);
877 return ERROR_NAND_OPERATION_TIMEOUT
;
879 if ((retval
= nand_read_status(nand
, &status
)) != ERROR_OK
)
881 LOG_ERROR("couldn't read status");
882 return ERROR_NAND_OPERATION_FAILED
;
885 if (status
& NAND_STATUS_FAIL
)
887 LOG_ERROR("write operation didn't pass, status: 0x%2.2x", status
);
888 return ERROR_NAND_OPERATION_FAILED
;
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)