1 /***************************************************************************
2 * Copyright (C) 2005, 2007 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * Copyright (C) 2009 Michael Schwingen *
5 * michael@schwingen.org *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
21 ***************************************************************************/
29 #include "binarybuffer.h"
32 static int cfi_register_commands(struct command_context_s
*cmd_ctx
);
33 static int cfi_flash_bank_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
, struct flash_bank_s
*bank
);
34 static int cfi_erase(struct flash_bank_s
*bank
, int first
, int last
);
35 static int cfi_protect(struct flash_bank_s
*bank
, int set
, int first
, int last
);
36 static int cfi_write(struct flash_bank_s
*bank
, uint8_t *buffer
, uint32_t offset
, uint32_t count
);
37 static int cfi_probe(struct flash_bank_s
*bank
);
38 static int cfi_auto_probe(struct flash_bank_s
*bank
);
39 static int cfi_protect_check(struct flash_bank_s
*bank
);
40 static int cfi_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
);
42 //static int cfi_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
44 #define CFI_MAX_BUS_WIDTH 4
45 #define CFI_MAX_CHIP_WIDTH 4
47 /* defines internal maximum size for code fragment in cfi_intel_write_block() */
48 #define CFI_MAX_INTEL_CODESIZE 256
50 flash_driver_t cfi_flash
=
53 .register_commands
= cfi_register_commands
,
54 .flash_bank_command
= cfi_flash_bank_command
,
56 .protect
= cfi_protect
,
59 .auto_probe
= cfi_auto_probe
,
60 .erase_check
= default_flash_blank_check
,
61 .protect_check
= cfi_protect_check
,
65 static cfi_unlock_addresses_t cfi_unlock_addresses
[] =
67 [CFI_UNLOCK_555_2AA
] = { .unlock1
= 0x555, .unlock2
= 0x2aa },
68 [CFI_UNLOCK_5555_2AAA
] = { .unlock1
= 0x5555, .unlock2
= 0x2aaa },
71 /* CFI fixups foward declarations */
72 static void cfi_fixup_0002_erase_regions(flash_bank_t
*flash
, void *param
);
73 static void cfi_fixup_0002_unlock_addresses(flash_bank_t
*flash
, void *param
);
74 static void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t
*flash
, void *param
);
76 /* fixup after reading cmdset 0002 primary query table */
77 static const cfi_fixup_t cfi_0002_fixups
[] = {
78 {CFI_MFR_SST
, 0x00D4, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
79 {CFI_MFR_SST
, 0x00D5, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
80 {CFI_MFR_SST
, 0x00D6, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
81 {CFI_MFR_SST
, 0x00D7, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
82 {CFI_MFR_SST
, 0x2780, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
83 {CFI_MFR_ATMEL
, 0x00C8, cfi_fixup_atmel_reversed_erase_regions
, NULL
},
84 {CFI_MFR_FUJITSU
, 0x226b, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
85 {CFI_MFR_AMIC
, 0xb31a, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
86 {CFI_MFR_MX
, 0x225b, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
87 {CFI_MFR_AMD
, 0x225b, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
]},
88 {CFI_MFR_ANY
, CFI_ID_ANY
, cfi_fixup_0002_erase_regions
, NULL
},
92 /* fixup after reading cmdset 0001 primary query table */
93 static const cfi_fixup_t cfi_0001_fixups
[] = {
97 static void cfi_fixup(flash_bank_t
*bank
, const cfi_fixup_t
*fixups
)
99 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
100 const cfi_fixup_t
*f
;
102 for (f
= fixups
; f
->fixup
; f
++)
104 if (((f
->mfr
== CFI_MFR_ANY
) || (f
->mfr
== cfi_info
->manufacturer
)) &&
105 ((f
->id
== CFI_ID_ANY
) || (f
->id
== cfi_info
->device_id
)))
107 f
->fixup(bank
, f
->param
);
112 /* inline uint32_t flash_address(flash_bank_t *bank, int sector, uint32_t offset) */
113 static __inline__
uint32_t flash_address(flash_bank_t
*bank
, int sector
, uint32_t offset
)
115 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
117 if (cfi_info
->x16_as_x8
) offset
*= 2;
119 /* while the sector list isn't built, only accesses to sector 0 work */
121 return bank
->base
+ offset
* bank
->bus_width
;
126 LOG_ERROR("BUG: sector list not yet built");
129 return bank
->base
+ bank
->sectors
[sector
].offset
+ offset
* bank
->bus_width
;
134 static void cfi_command(flash_bank_t
*bank
, uint8_t cmd
, uint8_t *cmd_buf
)
138 /* clear whole buffer, to ensure bits that exceed the bus_width
141 for (i
= 0; i
< CFI_MAX_BUS_WIDTH
; i
++)
144 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
146 for (i
= bank
->bus_width
; i
> 0; i
--)
148 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
153 for (i
= 1; i
<= bank
->bus_width
; i
++)
155 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
160 /* read unsigned 8-bit value from the bank
161 * flash banks are expected to be made of similar chips
162 * the query result should be the same for all
164 static uint8_t cfi_query_u8(flash_bank_t
*bank
, int sector
, uint32_t offset
)
166 target_t
*target
= bank
->target
;
167 uint8_t data
[CFI_MAX_BUS_WIDTH
];
169 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 1, data
);
171 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
174 return data
[bank
->bus_width
- 1];
177 /* read unsigned 8-bit value from the bank
178 * in case of a bank made of multiple chips,
179 * the individual values are ORed
181 static uint8_t cfi_get_u8(flash_bank_t
*bank
, int sector
, uint32_t offset
)
183 target_t
*target
= bank
->target
;
184 uint8_t data
[CFI_MAX_BUS_WIDTH
];
187 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 1, data
);
189 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
191 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
199 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
200 value
|= data
[bank
->bus_width
- 1 - i
];
206 static uint16_t cfi_query_u16(flash_bank_t
*bank
, int sector
, uint32_t offset
)
208 target_t
*target
= bank
->target
;
209 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
210 uint8_t data
[CFI_MAX_BUS_WIDTH
* 2];
212 if (cfi_info
->x16_as_x8
)
215 for (i
= 0;i
< 2;i
++)
216 target_read_memory(target
, flash_address(bank
, sector
, offset
+ i
), bank
->bus_width
, 1,
217 &data
[i
*bank
->bus_width
]);
220 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 2, data
);
222 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
223 return data
[0] | data
[bank
->bus_width
] << 8;
225 return data
[bank
->bus_width
- 1] | data
[(2 * bank
->bus_width
) - 1] << 8;
228 static uint32_t cfi_query_u32(flash_bank_t
*bank
, int sector
, uint32_t offset
)
230 target_t
*target
= bank
->target
;
231 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
232 uint8_t data
[CFI_MAX_BUS_WIDTH
* 4];
234 if (cfi_info
->x16_as_x8
)
237 for (i
= 0;i
< 4;i
++)
238 target_read_memory(target
, flash_address(bank
, sector
, offset
+ i
), bank
->bus_width
, 1,
239 &data
[i
*bank
->bus_width
]);
242 target_read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 4, data
);
244 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
245 return data
[0] | data
[bank
->bus_width
] << 8 | data
[bank
->bus_width
* 2] << 16 | data
[bank
->bus_width
* 3] << 24;
247 return data
[bank
->bus_width
- 1] | data
[(2* bank
->bus_width
) - 1] << 8 |
248 data
[(3 * bank
->bus_width
) - 1] << 16 | data
[(4 * bank
->bus_width
) - 1] << 24;
251 static void cfi_intel_clear_status_register(flash_bank_t
*bank
)
253 target_t
*target
= bank
->target
;
256 if (target
->state
!= TARGET_HALTED
)
258 LOG_ERROR("BUG: attempted to clear status register while target wasn't halted");
262 cfi_command(bank
, 0x50, command
);
263 target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
266 uint8_t cfi_intel_wait_status_busy(flash_bank_t
*bank
, int timeout
)
270 while ((!((status
= cfi_get_u8(bank
, 0, 0x0)) & 0x80)) && (timeout
-- > 0))
272 LOG_DEBUG("status: 0x%x", status
);
276 /* mask out bit 0 (reserved) */
277 status
= status
& 0xfe;
279 LOG_DEBUG("status: 0x%x", status
);
281 if ((status
& 0x80) != 0x80)
283 LOG_ERROR("timeout while waiting for WSM to become ready");
285 else if (status
!= 0x80)
287 LOG_ERROR("status register: 0x%x", status
);
289 LOG_ERROR("Block Lock-Bit Detected, Operation Abort");
291 LOG_ERROR("Program suspended");
293 LOG_ERROR("Low Programming Voltage Detected, Operation Aborted");
295 LOG_ERROR("Program Error / Error in Setting Lock-Bit");
297 LOG_ERROR("Error in Block Erasure or Clear Lock-Bits");
299 LOG_ERROR("Block Erase Suspended");
301 cfi_intel_clear_status_register(bank
);
307 int cfi_spansion_wait_status_busy(flash_bank_t
*bank
, int timeout
)
309 uint8_t status
, oldstatus
;
310 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
312 oldstatus
= cfi_get_u8(bank
, 0, 0x0);
315 status
= cfi_get_u8(bank
, 0, 0x0);
316 if ((status
^ oldstatus
) & 0x40) {
317 if (status
& cfi_info
->status_poll_mask
& 0x20) {
318 oldstatus
= cfi_get_u8(bank
, 0, 0x0);
319 status
= cfi_get_u8(bank
, 0, 0x0);
320 if ((status
^ oldstatus
) & 0x40) {
321 LOG_ERROR("dq5 timeout, status: 0x%x", status
);
322 return(ERROR_FLASH_OPERATION_FAILED
);
324 LOG_DEBUG("status: 0x%x", status
);
328 } else { /* no toggle: finished, OK */
329 LOG_DEBUG("status: 0x%x", status
);
335 } while (timeout
-- > 0);
337 LOG_ERROR("timeout, status: 0x%x", status
);
339 return(ERROR_FLASH_BUSY
);
342 static int cfi_read_intel_pri_ext(flash_bank_t
*bank
)
345 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
346 cfi_intel_pri_ext_t
*pri_ext
= malloc(sizeof(cfi_intel_pri_ext_t
));
347 target_t
*target
= bank
->target
;
350 cfi_info
->pri_ext
= pri_ext
;
352 pri_ext
->pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
353 pri_ext
->pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
354 pri_ext
->pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
356 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I'))
358 cfi_command(bank
, 0xf0, command
);
359 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
363 cfi_command(bank
, 0xff, command
);
364 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
368 LOG_ERROR("Could not read bank flash bank information");
369 return ERROR_FLASH_BANK_INVALID
;
372 pri_ext
->major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
373 pri_ext
->minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
375 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
377 pri_ext
->feature_support
= cfi_query_u32(bank
, 0, cfi_info
->pri_addr
+ 5);
378 pri_ext
->suspend_cmd_support
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9);
379 pri_ext
->blk_status_reg_mask
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xa);
381 LOG_DEBUG("feature_support: 0x%" PRIx32
", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x",
382 pri_ext
->feature_support
,
383 pri_ext
->suspend_cmd_support
,
384 pri_ext
->blk_status_reg_mask
);
386 pri_ext
->vcc_optimal
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xc);
387 pri_ext
->vpp_optimal
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xd);
389 LOG_DEBUG("Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x",
390 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
391 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
393 pri_ext
->num_protection_fields
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xe);
394 if (pri_ext
->num_protection_fields
!= 1)
396 LOG_WARNING("expected one protection register field, but found %i", pri_ext
->num_protection_fields
);
399 pri_ext
->prot_reg_addr
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xf);
400 pri_ext
->fact_prot_reg_size
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x11);
401 pri_ext
->user_prot_reg_size
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x12);
403 LOG_DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
, 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
408 static int cfi_read_spansion_pri_ext(flash_bank_t
*bank
)
411 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
412 cfi_spansion_pri_ext_t
*pri_ext
= malloc(sizeof(cfi_spansion_pri_ext_t
));
413 target_t
*target
= bank
->target
;
416 cfi_info
->pri_ext
= pri_ext
;
418 pri_ext
->pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
419 pri_ext
->pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
420 pri_ext
->pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
422 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I'))
424 cfi_command(bank
, 0xf0, command
);
425 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
429 LOG_ERROR("Could not read spansion bank information");
430 return ERROR_FLASH_BANK_INVALID
;
433 pri_ext
->major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
434 pri_ext
->minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
436 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
438 pri_ext
->SiliconRevision
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5);
439 pri_ext
->EraseSuspend
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6);
440 pri_ext
->BlkProt
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7);
441 pri_ext
->TmpBlkUnprotect
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8);
442 pri_ext
->BlkProtUnprot
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9);
443 pri_ext
->SimultaneousOps
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 10);
444 pri_ext
->BurstMode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 11);
445 pri_ext
->PageMode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 12);
446 pri_ext
->VppMin
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 13);
447 pri_ext
->VppMax
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 14);
448 pri_ext
->TopBottom
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 15);
450 LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext
->SiliconRevision
,
451 pri_ext
->EraseSuspend
, pri_ext
->BlkProt
);
453 LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext
->TmpBlkUnprotect
,
454 pri_ext
->BlkProtUnprot
, pri_ext
->SimultaneousOps
);
456 LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext
->BurstMode
, pri_ext
->PageMode
);
459 LOG_DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
460 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
461 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
463 LOG_DEBUG("WP# protection 0x%x", pri_ext
->TopBottom
);
465 /* default values for implementation specific workarounds */
466 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
467 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
468 pri_ext
->_reversed_geometry
= 0;
473 static int cfi_read_atmel_pri_ext(flash_bank_t
*bank
)
476 cfi_atmel_pri_ext_t atmel_pri_ext
;
477 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
478 cfi_spansion_pri_ext_t
*pri_ext
= malloc(sizeof(cfi_spansion_pri_ext_t
));
479 target_t
*target
= bank
->target
;
482 /* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
483 * but a different primary extended query table.
484 * We read the atmel table, and prepare a valid AMD/Spansion query table.
487 memset(pri_ext
, 0, sizeof(cfi_spansion_pri_ext_t
));
489 cfi_info
->pri_ext
= pri_ext
;
491 atmel_pri_ext
.pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
492 atmel_pri_ext
.pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
493 atmel_pri_ext
.pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
495 if ((atmel_pri_ext
.pri
[0] != 'P') || (atmel_pri_ext
.pri
[1] != 'R') || (atmel_pri_ext
.pri
[2] != 'I'))
497 cfi_command(bank
, 0xf0, command
);
498 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
502 LOG_ERROR("Could not read atmel bank information");
503 return ERROR_FLASH_BANK_INVALID
;
506 pri_ext
->pri
[0] = atmel_pri_ext
.pri
[0];
507 pri_ext
->pri
[1] = atmel_pri_ext
.pri
[1];
508 pri_ext
->pri
[2] = atmel_pri_ext
.pri
[2];
510 atmel_pri_ext
.major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
511 atmel_pri_ext
.minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
513 LOG_DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext
.pri
[0], atmel_pri_ext
.pri
[1], atmel_pri_ext
.pri
[2], atmel_pri_ext
.major_version
, atmel_pri_ext
.minor_version
);
515 pri_ext
->major_version
= atmel_pri_ext
.major_version
;
516 pri_ext
->minor_version
= atmel_pri_ext
.minor_version
;
518 atmel_pri_ext
.features
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5);
519 atmel_pri_ext
.bottom_boot
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6);
520 atmel_pri_ext
.burst_mode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7);
521 atmel_pri_ext
.page_mode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8);
523 LOG_DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
524 atmel_pri_ext
.features
, atmel_pri_ext
.bottom_boot
, atmel_pri_ext
.burst_mode
, atmel_pri_ext
.page_mode
);
526 if (atmel_pri_ext
.features
& 0x02)
527 pri_ext
->EraseSuspend
= 2;
529 if (atmel_pri_ext
.bottom_boot
)
530 pri_ext
->TopBottom
= 2;
532 pri_ext
->TopBottom
= 3;
534 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
535 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
540 static int cfi_read_0002_pri_ext(flash_bank_t
*bank
)
542 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
544 if (cfi_info
->manufacturer
== CFI_MFR_ATMEL
)
546 return cfi_read_atmel_pri_ext(bank
);
550 return cfi_read_spansion_pri_ext(bank
);
554 static int cfi_spansion_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
)
557 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
558 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
560 printed
= snprintf(buf
, buf_size
, "\nSpansion primary algorithm extend information:\n");
564 printed
= snprintf(buf
, buf_size
, "pri: '%c%c%c', version: %c.%c\n", pri_ext
->pri
[0],
565 pri_ext
->pri
[1], pri_ext
->pri
[2],
566 pri_ext
->major_version
, pri_ext
->minor_version
);
570 printed
= snprintf(buf
, buf_size
, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
571 (pri_ext
->SiliconRevision
) >> 2,
572 (pri_ext
->SiliconRevision
) & 0x03);
576 printed
= snprintf(buf
, buf_size
, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
577 pri_ext
->EraseSuspend
,
582 printed
= snprintf(buf
, buf_size
, "VppMin: %2.2d.%1.1x, VppMax: %2.2d.%1.1x\n",
583 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
584 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
589 static int cfi_intel_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
)
592 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
593 cfi_intel_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
595 printed
= snprintf(buf
, buf_size
, "\nintel primary algorithm extend information:\n");
599 printed
= snprintf(buf
, buf_size
, "pri: '%c%c%c', version: %c.%c\n", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
603 printed
= snprintf(buf
, buf_size
, "feature_support: 0x%" PRIx32
", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext
->feature_support
, pri_ext
->suspend_cmd_support
, pri_ext
->blk_status_reg_mask
);
607 printed
= snprintf(buf
, buf_size
, "Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x\n",
608 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
609 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
613 printed
= snprintf(buf
, buf_size
, "protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i\n", pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
, 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
618 static int cfi_register_commands(struct command_context_s
*cmd_ctx
)
620 /*command_t *cfi_cmd = */
621 register_command(cmd_ctx
, NULL
, "cfi", NULL
, COMMAND_ANY
, "flash bank cfi <base> <size> <chip_width> <bus_width> <targetNum> [jedec_probe/x16_as_x8]");
623 register_command(cmd_ctx, cfi_cmd, "part_id", cfi_handle_part_id_command, COMMAND_EXEC,
624 "print part id of cfi flash bank <num>");
629 /* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
631 static int cfi_flash_bank_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
, struct flash_bank_s
*bank
)
633 cfi_flash_bank_t
*cfi_info
;
640 LOG_WARNING("incomplete flash_bank cfi configuration");
641 return ERROR_FLASH_BANK_INVALID
;
644 if ((strtoul(args
[4], NULL
, 0) > CFI_MAX_CHIP_WIDTH
)
645 || (strtoul(args
[3], NULL
, 0) > CFI_MAX_BUS_WIDTH
))
647 LOG_ERROR("chip and bus width have to specified in bytes");
648 return ERROR_FLASH_BANK_INVALID
;
651 cfi_info
= malloc(sizeof(cfi_flash_bank_t
));
652 cfi_info
->probed
= 0;
653 bank
->driver_priv
= cfi_info
;
655 cfi_info
->write_algorithm
= NULL
;
657 cfi_info
->x16_as_x8
= 0;
658 cfi_info
->jedec_probe
= 0;
659 cfi_info
->not_cfi
= 0;
661 for (i
= 6; i
< argc
; i
++)
663 if (strcmp(args
[i
], "x16_as_x8") == 0)
665 cfi_info
->x16_as_x8
= 1;
667 else if (strcmp(args
[i
], "jedec_probe") == 0)
669 cfi_info
->jedec_probe
= 1;
673 cfi_info
->write_algorithm
= NULL
;
675 /* bank wasn't probed yet */
676 cfi_info
->qry
[0] = -1;
681 static int cfi_intel_erase(struct flash_bank_s
*bank
, int first
, int last
)
684 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
685 target_t
*target
= bank
->target
;
689 cfi_intel_clear_status_register(bank
);
691 for (i
= first
; i
<= last
; i
++)
693 cfi_command(bank
, 0x20, command
);
694 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
699 cfi_command(bank
, 0xd0, command
);
700 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
705 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->block_erase_timeout_typ
)) == 0x80)
706 bank
->sectors
[i
].is_erased
= 1;
709 cfi_command(bank
, 0xff, command
);
710 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
715 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32
, i
, bank
->base
);
716 return ERROR_FLASH_OPERATION_FAILED
;
720 cfi_command(bank
, 0xff, command
);
721 return target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
725 static int cfi_spansion_erase(struct flash_bank_s
*bank
, int first
, int last
)
728 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
729 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
730 target_t
*target
= bank
->target
;
734 for (i
= first
; i
<= last
; i
++)
736 cfi_command(bank
, 0xaa, command
);
737 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
742 cfi_command(bank
, 0x55, command
);
743 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
748 cfi_command(bank
, 0x80, command
);
749 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
754 cfi_command(bank
, 0xaa, command
);
755 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
760 cfi_command(bank
, 0x55, command
);
761 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
766 cfi_command(bank
, 0x30, command
);
767 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
772 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->block_erase_timeout_typ
)) == ERROR_OK
)
773 bank
->sectors
[i
].is_erased
= 1;
776 cfi_command(bank
, 0xf0, command
);
777 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
782 LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32
, i
, bank
->base
);
783 return ERROR_FLASH_OPERATION_FAILED
;
787 cfi_command(bank
, 0xf0, command
);
788 return target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
791 static int cfi_erase(struct flash_bank_s
*bank
, int first
, int last
)
793 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
795 if (bank
->target
->state
!= TARGET_HALTED
)
797 LOG_ERROR("Target not halted");
798 return ERROR_TARGET_NOT_HALTED
;
801 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
))
803 return ERROR_FLASH_SECTOR_INVALID
;
806 if (cfi_info
->qry
[0] != 'Q')
807 return ERROR_FLASH_BANK_NOT_PROBED
;
809 switch (cfi_info
->pri_id
)
813 return cfi_intel_erase(bank
, first
, last
);
816 return cfi_spansion_erase(bank
, first
, last
);
819 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
826 static int cfi_intel_protect(struct flash_bank_s
*bank
, int set
, int first
, int last
)
829 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
830 cfi_intel_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
831 target_t
*target
= bank
->target
;
836 /* if the device supports neither legacy lock/unlock (bit 3) nor
837 * instant individual block locking (bit 5).
839 if (!(pri_ext
->feature_support
& 0x28))
840 return ERROR_FLASH_OPERATION_FAILED
;
842 cfi_intel_clear_status_register(bank
);
844 for (i
= first
; i
<= last
; i
++)
846 cfi_command(bank
, 0x60, command
);
847 LOG_DEBUG("address: 0x%4.4" PRIx32
", command: 0x%4.4" PRIx32
, flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
848 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
854 cfi_command(bank
, 0x01, command
);
855 LOG_DEBUG("address: 0x%4.4" PRIx32
", command: 0x%4.4" PRIx32
, flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
856 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
860 bank
->sectors
[i
].is_protected
= 1;
864 cfi_command(bank
, 0xd0, command
);
865 LOG_DEBUG("address: 0x%4.4" PRIx32
", command: 0x%4.4" PRIx32
, flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
866 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
870 bank
->sectors
[i
].is_protected
= 0;
873 /* instant individual block locking doesn't require reading of the status register */
874 if (!(pri_ext
->feature_support
& 0x20))
876 /* Clear lock bits operation may take up to 1.4s */
877 cfi_intel_wait_status_busy(bank
, 1400);
881 uint8_t block_status
;
882 /* read block lock bit, to verify status */
883 cfi_command(bank
, 0x90, command
);
884 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
)) != ERROR_OK
)
888 block_status
= cfi_get_u8(bank
, i
, 0x2);
890 if ((block_status
& 0x1) != set
)
892 LOG_ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set
, block_status
);
893 cfi_command(bank
, 0x70, command
);
894 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
)) != ERROR_OK
)
898 cfi_intel_wait_status_busy(bank
, 10);
901 return ERROR_FLASH_OPERATION_FAILED
;
911 /* if the device doesn't support individual block lock bits set/clear,
912 * all blocks have been unlocked in parallel, so we set those that should be protected
914 if ((!set
) && (!(pri_ext
->feature_support
& 0x20)))
916 for (i
= 0; i
< bank
->num_sectors
; i
++)
918 if (bank
->sectors
[i
].is_protected
== 1)
920 cfi_intel_clear_status_register(bank
);
922 cfi_command(bank
, 0x60, command
);
923 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
928 cfi_command(bank
, 0x01, command
);
929 if ((retval
= target_write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
934 cfi_intel_wait_status_busy(bank
, 100);
939 cfi_command(bank
, 0xff, command
);
940 return target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
943 static int cfi_protect(struct flash_bank_s
*bank
, int set
, int first
, int last
)
945 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
947 if (bank
->target
->state
!= TARGET_HALTED
)
949 LOG_ERROR("Target not halted");
950 return ERROR_TARGET_NOT_HALTED
;
953 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
))
955 return ERROR_FLASH_SECTOR_INVALID
;
958 if (cfi_info
->qry
[0] != 'Q')
959 return ERROR_FLASH_BANK_NOT_PROBED
;
961 switch (cfi_info
->pri_id
)
965 cfi_intel_protect(bank
, set
, first
, last
);
968 LOG_ERROR("protect: cfi primary command set %i unsupported", cfi_info
->pri_id
);
975 /* FIXME Replace this by a simple memcpy() - still unsure about sideeffects */
976 static void cfi_add_byte(struct flash_bank_s
*bank
, uint8_t *word
, uint8_t byte
)
978 /* target_t *target = bank->target; */
983 * The data to flash must not be changed in endian! We write a bytestrem in
984 * target byte order already. Only the control and status byte lane of the flash
985 * WSM is interpreted by the CPU in different ways, when read a uint16_t or uint32_t
986 * word (data seems to be in the upper or lower byte lane for uint16_t accesses).
990 if (target
->endianness
== TARGET_LITTLE_ENDIAN
)
994 for (i
= 0; i
< bank
->bus_width
- 1; i
++)
995 word
[i
] = word
[i
+ 1];
996 word
[bank
->bus_width
- 1] = byte
;
1002 for (i
= bank
->bus_width
- 1; i
> 0; i
--)
1003 word
[i
] = word
[i
- 1];
1009 /* Convert code image to target endian */
1010 /* FIXME create general block conversion fcts in target.c?) */
1011 static void cfi_fix_code_endian(target_t
*target
, uint8_t *dest
, const uint32_t *src
, uint32_t count
)
1014 for (i
= 0; i
< count
; i
++)
1016 target_buffer_set_u32(target
, dest
, *src
);
1022 static uint32_t cfi_command_val(flash_bank_t
*bank
, uint8_t cmd
)
1024 target_t
*target
= bank
->target
;
1026 uint8_t buf
[CFI_MAX_BUS_WIDTH
];
1027 cfi_command(bank
, cmd
, buf
);
1028 switch (bank
->bus_width
)
1034 return target_buffer_get_u16(target
, buf
);
1037 return target_buffer_get_u32(target
, buf
);
1040 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
1045 static int cfi_intel_write_block(struct flash_bank_s
*bank
, uint8_t *buffer
, uint32_t address
, uint32_t count
)
1047 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1048 target_t
*target
= bank
->target
;
1049 reg_param_t reg_params
[7];
1050 armv4_5_algorithm_t armv4_5_info
;
1051 working_area_t
*source
;
1052 uint32_t buffer_size
= 32768;
1053 uint32_t write_command_val
, busy_pattern_val
, error_pattern_val
;
1055 /* algorithm register usage:
1056 * r0: source address (in RAM)
1057 * r1: target address (in Flash)
1059 * r3: flash write command
1060 * r4: status byte (returned to host)
1061 * r5: busy test pattern
1062 * r6: error test pattern
1065 static const uint32_t word_32_code
[] = {
1066 0xe4904004, /* loop: ldr r4, [r0], #4 */
1067 0xe5813000, /* str r3, [r1] */
1068 0xe5814000, /* str r4, [r1] */
1069 0xe5914000, /* busy: ldr r4, [r1] */
1070 0xe0047005, /* and r7, r4, r5 */
1071 0xe1570005, /* cmp r7, r5 */
1072 0x1afffffb, /* bne busy */
1073 0xe1140006, /* tst r4, r6 */
1074 0x1a000003, /* bne done */
1075 0xe2522001, /* subs r2, r2, #1 */
1076 0x0a000001, /* beq done */
1077 0xe2811004, /* add r1, r1 #4 */
1078 0xeafffff2, /* b loop */
1079 0xeafffffe /* done: b -2 */
1082 static const uint32_t word_16_code
[] = {
1083 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
1084 0xe1c130b0, /* strh r3, [r1] */
1085 0xe1c140b0, /* strh r4, [r1] */
1086 0xe1d140b0, /* busy ldrh r4, [r1] */
1087 0xe0047005, /* and r7, r4, r5 */
1088 0xe1570005, /* cmp r7, r5 */
1089 0x1afffffb, /* bne busy */
1090 0xe1140006, /* tst r4, r6 */
1091 0x1a000003, /* bne done */
1092 0xe2522001, /* subs r2, r2, #1 */
1093 0x0a000001, /* beq done */
1094 0xe2811002, /* add r1, r1 #2 */
1095 0xeafffff2, /* b loop */
1096 0xeafffffe /* done: b -2 */
1099 static const uint32_t word_8_code
[] = {
1100 0xe4d04001, /* loop: ldrb r4, [r0], #1 */
1101 0xe5c13000, /* strb r3, [r1] */
1102 0xe5c14000, /* strb r4, [r1] */
1103 0xe5d14000, /* busy ldrb r4, [r1] */
1104 0xe0047005, /* and r7, r4, r5 */
1105 0xe1570005, /* cmp r7, r5 */
1106 0x1afffffb, /* bne busy */
1107 0xe1140006, /* tst r4, r6 */
1108 0x1a000003, /* bne done */
1109 0xe2522001, /* subs r2, r2, #1 */
1110 0x0a000001, /* beq done */
1111 0xe2811001, /* add r1, r1 #1 */
1112 0xeafffff2, /* b loop */
1113 0xeafffffe /* done: b -2 */
1115 uint8_t target_code
[4*CFI_MAX_INTEL_CODESIZE
];
1116 const uint32_t *target_code_src
;
1117 uint32_t target_code_size
;
1118 int retval
= ERROR_OK
;
1121 cfi_intel_clear_status_register(bank
);
1123 armv4_5_info
.common_magic
= ARMV4_5_COMMON_MAGIC
;
1124 armv4_5_info
.core_mode
= ARMV4_5_MODE_SVC
;
1125 armv4_5_info
.core_state
= ARMV4_5_STATE_ARM
;
1127 /* If we are setting up the write_algorith, we need target_code_src */
1128 /* if not we only need target_code_size. */
1130 /* However, we don't want to create multiple code paths, so we */
1131 /* do the unecessary evaluation of target_code_src, which the */
1132 /* compiler will probably nicely optimize away if not needed */
1134 /* prepare algorithm code for target endian */
1135 switch (bank
->bus_width
)
1138 target_code_src
= word_8_code
;
1139 target_code_size
= sizeof(word_8_code
);
1142 target_code_src
= word_16_code
;
1143 target_code_size
= sizeof(word_16_code
);
1146 target_code_src
= word_32_code
;
1147 target_code_size
= sizeof(word_32_code
);
1150 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
1151 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1154 /* flash write code */
1155 if (!cfi_info
->write_algorithm
)
1157 if (target_code_size
> sizeof(target_code
))
1159 LOG_WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
1160 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1162 cfi_fix_code_endian(target
, target_code
, target_code_src
, target_code_size
/ 4);
1164 /* Get memory for block write handler */
1165 retval
= target_alloc_working_area(target
, target_code_size
, &cfi_info
->write_algorithm
);
1166 if (retval
!= ERROR_OK
)
1168 LOG_WARNING("No working area available, can't do block memory writes");
1169 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1172 /* write algorithm code to working area */
1173 retval
= target_write_buffer(target
, cfi_info
->write_algorithm
->address
, target_code_size
, target_code
);
1174 if (retval
!= ERROR_OK
)
1176 LOG_ERROR("Unable to write block write code to target");
1181 /* Get a workspace buffer for the data to flash starting with 32k size.
1182 Half size until buffer would be smaller 256 Bytem then fail back */
1183 /* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */
1184 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
)
1187 if (buffer_size
<= 256)
1189 LOG_WARNING("no large enough working area available, can't do block memory writes");
1190 retval
= ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1195 /* setup algo registers */
1196 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1197 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1198 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1199 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1200 init_reg_param(®_params
[4], "r4", 32, PARAM_IN
);
1201 init_reg_param(®_params
[5], "r5", 32, PARAM_OUT
);
1202 init_reg_param(®_params
[6], "r6", 32, PARAM_OUT
);
1204 /* prepare command and status register patterns */
1205 write_command_val
= cfi_command_val(bank
, 0x40);
1206 busy_pattern_val
= cfi_command_val(bank
, 0x80);
1207 error_pattern_val
= cfi_command_val(bank
, 0x7e);
1209 LOG_INFO("Using target buffer at 0x%08" PRIx32
" and of size 0x%04" PRIx32
, source
->address
, buffer_size
);
1211 /* Programming main loop */
1214 uint32_t thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1217 if ((retval
= target_write_buffer(target
, source
->address
, thisrun_count
, buffer
)) != ERROR_OK
)
1222 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1223 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1224 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1226 buf_set_u32(reg_params
[3].value
, 0, 32, write_command_val
);
1227 buf_set_u32(reg_params
[5].value
, 0, 32, busy_pattern_val
);
1228 buf_set_u32(reg_params
[6].value
, 0, 32, error_pattern_val
);
1230 LOG_INFO("Write 0x%04" PRIx32
" bytes to flash at 0x%08" PRIx32
, thisrun_count
, address
);
1232 /* Execute algorithm, assume breakpoint for last instruction */
1233 retval
= target_run_algorithm(target
, 0, NULL
, 7, reg_params
,
1234 cfi_info
->write_algorithm
->address
,
1235 cfi_info
->write_algorithm
->address
+ target_code_size
- sizeof(uint32_t),
1236 10000, /* 10s should be enough for max. 32k of data */
1239 /* On failure try a fall back to direct word writes */
1240 if (retval
!= ERROR_OK
)
1242 cfi_intel_clear_status_register(bank
);
1243 LOG_ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
1244 retval
= ERROR_FLASH_OPERATION_FAILED
;
1245 /* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */
1246 /* FIXME To allow fall back or recovery, we must save the actual status
1247 somewhere, so that a higher level code can start recovery. */
1251 /* Check return value from algo code */
1252 wsm_error
= buf_get_u32(reg_params
[4].value
, 0, 32) & error_pattern_val
;
1255 /* read status register (outputs debug inforation) */
1256 cfi_intel_wait_status_busy(bank
, 100);
1257 cfi_intel_clear_status_register(bank
);
1258 retval
= ERROR_FLASH_OPERATION_FAILED
;
1262 buffer
+= thisrun_count
;
1263 address
+= thisrun_count
;
1264 count
-= thisrun_count
;
1267 /* free up resources */
1270 target_free_working_area(target
, source
);
1272 if (cfi_info
->write_algorithm
)
1274 target_free_working_area(target
, cfi_info
->write_algorithm
);
1275 cfi_info
->write_algorithm
= NULL
;
1278 destroy_reg_param(®_params
[0]);
1279 destroy_reg_param(®_params
[1]);
1280 destroy_reg_param(®_params
[2]);
1281 destroy_reg_param(®_params
[3]);
1282 destroy_reg_param(®_params
[4]);
1283 destroy_reg_param(®_params
[5]);
1284 destroy_reg_param(®_params
[6]);
1289 static int cfi_spansion_write_block(struct flash_bank_s
*bank
, uint8_t *buffer
, uint32_t address
, uint32_t count
)
1291 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1292 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1293 target_t
*target
= bank
->target
;
1294 reg_param_t reg_params
[10];
1295 armv4_5_algorithm_t armv4_5_info
;
1296 working_area_t
*source
;
1297 uint32_t buffer_size
= 32768;
1299 int retval
, retvaltemp
;
1300 int exit_code
= ERROR_OK
;
1302 /* input parameters - */
1303 /* R0 = source address */
1304 /* R1 = destination address */
1305 /* R2 = number of writes */
1306 /* R3 = flash write command */
1307 /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
1308 /* output parameters - */
1309 /* R5 = 0x80 ok 0x00 bad */
1310 /* temp registers - */
1311 /* R6 = value read from flash to test status */
1312 /* R7 = holding register */
1313 /* unlock registers - */
1314 /* R8 = unlock1_addr */
1315 /* R9 = unlock1_cmd */
1316 /* R10 = unlock2_addr */
1317 /* R11 = unlock2_cmd */
1319 static const uint32_t word_32_code
[] = {
1320 /* 00008100 <sp_32_code>: */
1321 0xe4905004, /* ldr r5, [r0], #4 */
1322 0xe5889000, /* str r9, [r8] */
1323 0xe58ab000, /* str r11, [r10] */
1324 0xe5883000, /* str r3, [r8] */
1325 0xe5815000, /* str r5, [r1] */
1326 0xe1a00000, /* nop */
1328 /* 00008110 <sp_32_busy>: */
1329 0xe5916000, /* ldr r6, [r1] */
1330 0xe0257006, /* eor r7, r5, r6 */
1331 0xe0147007, /* ands r7, r4, r7 */
1332 0x0a000007, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1333 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1334 0x0afffff9, /* beq 8110 <sp_32_busy> ; b if DQ5 low */
1335 0xe5916000, /* ldr r6, [r1] */
1336 0xe0257006, /* eor r7, r5, r6 */
1337 0xe0147007, /* ands r7, r4, r7 */
1338 0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1339 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
1340 0x1a000004, /* bne 8154 <sp_32_done> */
1342 /* 00008140 <sp_32_cont>: */
1343 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1344 0x03a05080, /* moveq r5, #128 ; 0x80 */
1345 0x0a000001, /* beq 8154 <sp_32_done> */
1346 0xe2811004, /* add r1, r1, #4 ; 0x4 */
1347 0xeaffffe8, /* b 8100 <sp_32_code> */
1349 /* 00008154 <sp_32_done>: */
1350 0xeafffffe /* b 8154 <sp_32_done> */
1353 static const uint32_t word_16_code
[] = {
1354 /* 00008158 <sp_16_code>: */
1355 0xe0d050b2, /* ldrh r5, [r0], #2 */
1356 0xe1c890b0, /* strh r9, [r8] */
1357 0xe1cab0b0, /* strh r11, [r10] */
1358 0xe1c830b0, /* strh r3, [r8] */
1359 0xe1c150b0, /* strh r5, [r1] */
1360 0xe1a00000, /* nop (mov r0,r0) */
1362 /* 00008168 <sp_16_busy>: */
1363 0xe1d160b0, /* ldrh r6, [r1] */
1364 0xe0257006, /* eor r7, r5, r6 */
1365 0xe0147007, /* ands r7, r4, r7 */
1366 0x0a000007, /* beq 8198 <sp_16_cont> */
1367 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1368 0x0afffff9, /* beq 8168 <sp_16_busy> */
1369 0xe1d160b0, /* ldrh r6, [r1] */
1370 0xe0257006, /* eor r7, r5, r6 */
1371 0xe0147007, /* ands r7, r4, r7 */
1372 0x0a000001, /* beq 8198 <sp_16_cont> */
1373 0xe3a05000, /* mov r5, #0 ; 0x0 */
1374 0x1a000004, /* bne 81ac <sp_16_done> */
1376 /* 00008198 <sp_16_cont>: */
1377 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1378 0x03a05080, /* moveq r5, #128 ; 0x80 */
1379 0x0a000001, /* beq 81ac <sp_16_done> */
1380 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1381 0xeaffffe8, /* b 8158 <sp_16_code> */
1383 /* 000081ac <sp_16_done>: */
1384 0xeafffffe /* b 81ac <sp_16_done> */
1387 static const uint32_t word_16_code_dq7only
[] = {
1389 0xe0d050b2, /* ldrh r5, [r0], #2 */
1390 0xe1c890b0, /* strh r9, [r8] */
1391 0xe1cab0b0, /* strh r11, [r10] */
1392 0xe1c830b0, /* strh r3, [r8] */
1393 0xe1c150b0, /* strh r5, [r1] */
1394 0xe1a00000, /* nop (mov r0,r0) */
1397 0xe1d160b0, /* ldrh r6, [r1] */
1398 0xe0257006, /* eor r7, r5, r6 */
1399 0xe2177080, /* ands r7, #0x80 */
1400 0x1afffffb, /* bne 8168 <sp_16_busy> */
1402 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1403 0x03a05080, /* moveq r5, #128 ; 0x80 */
1404 0x0a000001, /* beq 81ac <sp_16_done> */
1405 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1406 0xeafffff0, /* b 8158 <sp_16_code> */
1408 /* 000081ac <sp_16_done>: */
1409 0xeafffffe /* b 81ac <sp_16_done> */
1412 static const uint32_t word_8_code
[] = {
1413 /* 000081b0 <sp_16_code_end>: */
1414 0xe4d05001, /* ldrb r5, [r0], #1 */
1415 0xe5c89000, /* strb r9, [r8] */
1416 0xe5cab000, /* strb r11, [r10] */
1417 0xe5c83000, /* strb r3, [r8] */
1418 0xe5c15000, /* strb r5, [r1] */
1419 0xe1a00000, /* nop (mov r0,r0) */
1421 /* 000081c0 <sp_8_busy>: */
1422 0xe5d16000, /* ldrb r6, [r1] */
1423 0xe0257006, /* eor r7, r5, r6 */
1424 0xe0147007, /* ands r7, r4, r7 */
1425 0x0a000007, /* beq 81f0 <sp_8_cont> */
1426 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1427 0x0afffff9, /* beq 81c0 <sp_8_busy> */
1428 0xe5d16000, /* ldrb r6, [r1] */
1429 0xe0257006, /* eor r7, r5, r6 */
1430 0xe0147007, /* ands r7, r4, r7 */
1431 0x0a000001, /* beq 81f0 <sp_8_cont> */
1432 0xe3a05000, /* mov r5, #0 ; 0x0 */
1433 0x1a000004, /* bne 8204 <sp_8_done> */
1435 /* 000081f0 <sp_8_cont>: */
1436 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1437 0x03a05080, /* moveq r5, #128 ; 0x80 */
1438 0x0a000001, /* beq 8204 <sp_8_done> */
1439 0xe2811001, /* add r1, r1, #1 ; 0x1 */
1440 0xeaffffe8, /* b 81b0 <sp_16_code_end> */
1442 /* 00008204 <sp_8_done>: */
1443 0xeafffffe /* b 8204 <sp_8_done> */
1446 armv4_5_info
.common_magic
= ARMV4_5_COMMON_MAGIC
;
1447 armv4_5_info
.core_mode
= ARMV4_5_MODE_SVC
;
1448 armv4_5_info
.core_state
= ARMV4_5_STATE_ARM
;
1450 /* flash write code */
1451 int target_code_size
;
1452 if (!cfi_info
->write_algorithm
)
1454 uint8_t *target_code
;
1455 const uint32_t *src
;
1457 /* convert bus-width dependent algorithm code to correct endiannes */
1458 switch (bank
->bus_width
)
1462 target_code_size
= sizeof(word_8_code
);
1465 /* Check for DQ5 support */
1466 if( cfi_info
->status_poll_mask
& (1 << 5) )
1469 target_code_size
= sizeof(word_16_code
);
1473 /* No DQ5 support. Use DQ7 DATA# polling only. */
1474 src
= word_16_code_dq7only
;
1475 target_code_size
= sizeof(word_16_code_dq7only
);
1480 target_code_size
= sizeof(word_32_code
);
1483 LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
1484 return ERROR_FLASH_OPERATION_FAILED
;
1486 target_code
= malloc(target_code_size
);
1487 cfi_fix_code_endian(target
, target_code
, src
, target_code_size
/ 4);
1489 /* allocate working area */
1490 retval
= target_alloc_working_area(target
, target_code_size
,
1491 &cfi_info
->write_algorithm
);
1492 if (retval
!= ERROR_OK
)
1498 /* write algorithm code to working area */
1499 if ((retval
= target_write_buffer(target
, cfi_info
->write_algorithm
->address
,
1500 target_code_size
, target_code
)) != ERROR_OK
)
1508 /* the following code still assumes target code is fixed 24*4 bytes */
1510 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
)
1513 if (buffer_size
<= 256)
1515 /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
1516 if (cfi_info
->write_algorithm
)
1517 target_free_working_area(target
, cfi_info
->write_algorithm
);
1519 LOG_WARNING("not enough working area available, can't do block memory writes");
1520 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1524 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1525 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1526 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1527 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1528 init_reg_param(®_params
[4], "r4", 32, PARAM_OUT
);
1529 init_reg_param(®_params
[5], "r5", 32, PARAM_IN
);
1530 init_reg_param(®_params
[6], "r8", 32, PARAM_OUT
);
1531 init_reg_param(®_params
[7], "r9", 32, PARAM_OUT
);
1532 init_reg_param(®_params
[8], "r10", 32, PARAM_OUT
);
1533 init_reg_param(®_params
[9], "r11", 32, PARAM_OUT
);
1537 uint32_t thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1539 retvaltemp
= target_write_buffer(target
, source
->address
, thisrun_count
, buffer
);
1541 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1542 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1543 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1544 buf_set_u32(reg_params
[3].value
, 0, 32, cfi_command_val(bank
, 0xA0));
1545 buf_set_u32(reg_params
[4].value
, 0, 32, cfi_command_val(bank
, 0x80));
1546 buf_set_u32(reg_params
[6].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock1
));
1547 buf_set_u32(reg_params
[7].value
, 0, 32, 0xaaaaaaaa);
1548 buf_set_u32(reg_params
[8].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock2
));
1549 buf_set_u32(reg_params
[9].value
, 0, 32, 0x55555555);
1551 retval
= target_run_algorithm(target
, 0, NULL
, 10, reg_params
,
1552 cfi_info
->write_algorithm
->address
,
1553 cfi_info
->write_algorithm
->address
+ ((target_code_size
) - 4),
1554 10000, &armv4_5_info
);
1556 status
= buf_get_u32(reg_params
[5].value
, 0, 32);
1558 if ((retval
!= ERROR_OK
) || (retvaltemp
!= ERROR_OK
) || status
!= 0x80)
1560 LOG_DEBUG("status: 0x%" PRIx32
, status
);
1561 exit_code
= ERROR_FLASH_OPERATION_FAILED
;
1565 buffer
+= thisrun_count
;
1566 address
+= thisrun_count
;
1567 count
-= thisrun_count
;
1570 target_free_all_working_areas(target
);
1572 destroy_reg_param(®_params
[0]);
1573 destroy_reg_param(®_params
[1]);
1574 destroy_reg_param(®_params
[2]);
1575 destroy_reg_param(®_params
[3]);
1576 destroy_reg_param(®_params
[4]);
1577 destroy_reg_param(®_params
[5]);
1578 destroy_reg_param(®_params
[6]);
1579 destroy_reg_param(®_params
[7]);
1580 destroy_reg_param(®_params
[8]);
1581 destroy_reg_param(®_params
[9]);
1586 static int cfi_intel_write_word(struct flash_bank_s
*bank
, uint8_t *word
, uint32_t address
)
1589 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1590 target_t
*target
= bank
->target
;
1593 cfi_intel_clear_status_register(bank
);
1594 cfi_command(bank
, 0x40, command
);
1595 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, command
)) != ERROR_OK
)
1600 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, word
)) != ERROR_OK
)
1605 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != 0x80)
1607 cfi_command(bank
, 0xff, command
);
1608 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1613 LOG_ERROR("couldn't write word at base 0x%" PRIx32
", address %" PRIx32
, bank
->base
, address
);
1614 return ERROR_FLASH_OPERATION_FAILED
;
1620 static int cfi_intel_write_words(struct flash_bank_s
*bank
, uint8_t *word
, uint32_t wordcount
, uint32_t address
)
1623 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1624 target_t
*target
= bank
->target
;
1627 /* Calculate buffer size and boundary mask */
1628 uint32_t buffersize
= (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
1629 uint32_t buffermask
= buffersize
-1;
1630 uint32_t bufferwsize
;
1632 /* Check for valid range */
1633 if (address
& buffermask
)
1635 LOG_ERROR("Write address at base 0x%" PRIx32
", address %" PRIx32
" not aligned to 2^%d boundary",
1636 bank
->base
, address
, cfi_info
->max_buf_write_size
);
1637 return ERROR_FLASH_OPERATION_FAILED
;
1639 switch (bank
->chip_width
)
1641 case 4 : bufferwsize
= buffersize
/ 4; break;
1642 case 2 : bufferwsize
= buffersize
/ 2; break;
1643 case 1 : bufferwsize
= buffersize
; break;
1645 LOG_ERROR("Unsupported chip width %d", bank
->chip_width
);
1646 return ERROR_FLASH_OPERATION_FAILED
;
1649 bufferwsize
/=(bank
->bus_width
/ bank
->chip_width
);
1652 /* Check for valid size */
1653 if (wordcount
> bufferwsize
)
1655 LOG_ERROR("Number of data words %" PRId32
" exceeds available buffersize %" PRId32
, wordcount
, buffersize
);
1656 return ERROR_FLASH_OPERATION_FAILED
;
1659 /* Write to flash buffer */
1660 cfi_intel_clear_status_register(bank
);
1662 /* Initiate buffer operation _*/
1663 cfi_command(bank
, 0xE8, command
);
1664 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, command
)) != ERROR_OK
)
1668 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->buf_write_timeout_max
)) != 0x80)
1670 cfi_command(bank
, 0xff, command
);
1671 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1676 LOG_ERROR("couldn't start buffer write operation at base 0x%" PRIx32
", address %" PRIx32
, bank
->base
, address
);
1677 return ERROR_FLASH_OPERATION_FAILED
;
1680 /* Write buffer wordcount-1 and data words */
1681 cfi_command(bank
, bufferwsize
-1, command
);
1682 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, command
)) != ERROR_OK
)
1687 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, bufferwsize
, word
)) != ERROR_OK
)
1692 /* Commit write operation */
1693 cfi_command(bank
, 0xd0, command
);
1694 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, command
)) != ERROR_OK
)
1698 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->buf_write_timeout_max
)) != 0x80)
1700 cfi_command(bank
, 0xff, command
);
1701 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1706 LOG_ERROR("Buffer write at base 0x%" PRIx32
", address %" PRIx32
" failed.", bank
->base
, address
);
1707 return ERROR_FLASH_OPERATION_FAILED
;
1713 static int cfi_spansion_write_word(struct flash_bank_s
*bank
, uint8_t *word
, uint32_t address
)
1716 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1717 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1718 target_t
*target
= bank
->target
;
1721 cfi_command(bank
, 0xaa, command
);
1722 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1727 cfi_command(bank
, 0x55, command
);
1728 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1733 cfi_command(bank
, 0xa0, command
);
1734 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1739 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, word
)) != ERROR_OK
)
1744 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != ERROR_OK
)
1746 cfi_command(bank
, 0xf0, command
);
1747 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1752 LOG_ERROR("couldn't write word at base 0x%" PRIx32
", address %" PRIx32
, bank
->base
, address
);
1753 return ERROR_FLASH_OPERATION_FAILED
;
1759 static int cfi_spansion_write_words(struct flash_bank_s
*bank
, uint8_t *word
, uint32_t wordcount
, uint32_t address
)
1762 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1763 target_t
*target
= bank
->target
;
1765 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1767 /* Calculate buffer size and boundary mask */
1768 uint32_t buffersize
= (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
1769 uint32_t buffermask
= buffersize
-1;
1770 uint32_t bufferwsize
;
1772 /* Check for valid range */
1773 if (address
& buffermask
)
1775 LOG_ERROR("Write address at base 0x%" PRIx32
", address %" PRIx32
" not aligned to 2^%d boundary", bank
->base
, address
, cfi_info
->max_buf_write_size
);
1776 return ERROR_FLASH_OPERATION_FAILED
;
1778 switch (bank
->chip_width
)
1780 case 4 : bufferwsize
= buffersize
/ 4; break;
1781 case 2 : bufferwsize
= buffersize
/ 2; break;
1782 case 1 : bufferwsize
= buffersize
; break;
1784 LOG_ERROR("Unsupported chip width %d", bank
->chip_width
);
1785 return ERROR_FLASH_OPERATION_FAILED
;
1788 bufferwsize
/=(bank
->bus_width
/ bank
->chip_width
);
1790 /* Check for valid size */
1791 if (wordcount
> bufferwsize
)
1793 LOG_ERROR("Number of data words %" PRId32
" exceeds available buffersize %" PRId32
, wordcount
, buffersize
);
1794 return ERROR_FLASH_OPERATION_FAILED
;
1798 cfi_command(bank
, 0xaa, command
);
1799 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1804 cfi_command(bank
, 0x55, command
);
1805 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1810 // Buffer load command
1811 cfi_command(bank
, 0x25, command
);
1812 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, command
)) != ERROR_OK
)
1817 /* Write buffer wordcount-1 and data words */
1818 cfi_command(bank
, bufferwsize
-1, command
);
1819 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, command
)) != ERROR_OK
)
1824 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, bufferwsize
, word
)) != ERROR_OK
)
1829 /* Commit write operation */
1830 cfi_command(bank
, 0x29, command
);
1831 if ((retval
= target_write_memory(target
, address
, bank
->bus_width
, 1, command
)) != ERROR_OK
)
1836 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != ERROR_OK
)
1838 cfi_command(bank
, 0xf0, command
);
1839 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
1844 LOG_ERROR("couldn't write block at base 0x%" PRIx32
", address %" PRIx32
", size %" PRIx32
, bank
->base
, address
, bufferwsize
);
1845 return ERROR_FLASH_OPERATION_FAILED
;
1851 static int cfi_write_word(struct flash_bank_s
*bank
, uint8_t *word
, uint32_t address
)
1853 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1855 switch (cfi_info
->pri_id
)
1859 return cfi_intel_write_word(bank
, word
, address
);
1862 return cfi_spansion_write_word(bank
, word
, address
);
1865 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1869 return ERROR_FLASH_OPERATION_FAILED
;
1872 static int cfi_write_words(struct flash_bank_s
*bank
, uint8_t *word
, uint32_t wordcount
, uint32_t address
)
1874 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1876 switch (cfi_info
->pri_id
)
1880 return cfi_intel_write_words(bank
, word
, wordcount
, address
);
1883 return cfi_spansion_write_words(bank
, word
, wordcount
, address
);
1886 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1890 return ERROR_FLASH_OPERATION_FAILED
;
1893 int cfi_write(struct flash_bank_s
*bank
, uint8_t *buffer
, uint32_t offset
, uint32_t count
)
1895 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1896 target_t
*target
= bank
->target
;
1897 uint32_t address
= bank
->base
+ offset
; /* address of first byte to be programmed */
1898 uint32_t write_p
, copy_p
;
1899 int align
; /* number of unaligned bytes */
1900 int blk_count
; /* number of bus_width bytes for block copy */
1901 uint8_t current_word
[CFI_MAX_BUS_WIDTH
* 4]; /* word (bus_width size) currently being programmed */
1905 if (bank
->target
->state
!= TARGET_HALTED
)
1907 LOG_ERROR("Target not halted");
1908 return ERROR_TARGET_NOT_HALTED
;
1911 if (offset
+ count
> bank
->size
)
1912 return ERROR_FLASH_DST_OUT_OF_BANK
;
1914 if (cfi_info
->qry
[0] != 'Q')
1915 return ERROR_FLASH_BANK_NOT_PROBED
;
1917 /* start at the first byte of the first word (bus_width size) */
1918 write_p
= address
& ~(bank
->bus_width
- 1);
1919 if ((align
= address
- write_p
) != 0)
1921 LOG_INFO("Fixup %d unaligned head bytes", align
);
1923 for (i
= 0; i
< bank
->bus_width
; i
++)
1924 current_word
[i
] = 0;
1927 /* copy bytes before the first write address */
1928 for (i
= 0; i
< align
; ++i
, ++copy_p
)
1931 if ((retval
= target_read_memory(target
, copy_p
, 1, 1, &byte
)) != ERROR_OK
)
1935 cfi_add_byte(bank
, current_word
, byte
);
1938 /* add bytes from the buffer */
1939 for (; (i
< bank
->bus_width
) && (count
> 0); i
++)
1941 cfi_add_byte(bank
, current_word
, *buffer
++);
1946 /* if the buffer is already finished, copy bytes after the last write address */
1947 for (; (count
== 0) && (i
< bank
->bus_width
); ++i
, ++copy_p
)
1950 if ((retval
= target_read_memory(target
, copy_p
, 1, 1, &byte
)) != ERROR_OK
)
1954 cfi_add_byte(bank
, current_word
, byte
);
1957 retval
= cfi_write_word(bank
, current_word
, write_p
);
1958 if (retval
!= ERROR_OK
)
1963 /* handle blocks of bus_size aligned bytes */
1964 blk_count
= count
& ~(bank
->bus_width
- 1); /* round down, leave tail bytes */
1965 switch (cfi_info
->pri_id
)
1967 /* try block writes (fails without working area) */
1970 retval
= cfi_intel_write_block(bank
, buffer
, write_p
, blk_count
);
1973 retval
= cfi_spansion_write_block(bank
, buffer
, write_p
, blk_count
);
1976 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1977 retval
= ERROR_FLASH_OPERATION_FAILED
;
1980 if (retval
== ERROR_OK
)
1982 /* Increment pointers and decrease count on succesful block write */
1983 buffer
+= blk_count
;
1984 write_p
+= blk_count
;
1989 if (retval
== ERROR_TARGET_RESOURCE_NOT_AVAILABLE
)
1991 //adjust buffersize for chip width
1992 uint32_t buffersize
= (1UL << cfi_info
->max_buf_write_size
) * (bank
->bus_width
/ bank
->chip_width
);
1993 uint32_t buffermask
= buffersize
-1;
1994 uint32_t bufferwsize
;
1996 switch (bank
->chip_width
)
1998 case 4 : bufferwsize
= buffersize
/ 4; break;
1999 case 2 : bufferwsize
= buffersize
/ 2; break;
2000 case 1 : bufferwsize
= buffersize
; break;
2002 LOG_ERROR("Unsupported chip width %d", bank
->chip_width
);
2003 return ERROR_FLASH_OPERATION_FAILED
;
2006 bufferwsize
/=(bank
->bus_width
/ bank
->chip_width
);
2008 /* fall back to memory writes */
2009 while (count
>= (uint32_t)bank
->bus_width
)
2012 if ((write_p
& 0xff) == 0)
2014 LOG_INFO("Programming at %08" PRIx32
", count %08" PRIx32
" bytes remaining", write_p
, count
);
2017 if ((bufferwsize
> 0) && (count
>= buffersize
) && !(write_p
& buffermask
))
2019 retval
= cfi_write_words(bank
, buffer
, bufferwsize
, write_p
);
2020 if (retval
== ERROR_OK
)
2022 buffer
+= buffersize
;
2023 write_p
+= buffersize
;
2024 count
-= buffersize
;
2028 /* try the slow way? */
2031 for (i
= 0; i
< bank
->bus_width
; i
++)
2032 current_word
[i
] = 0;
2034 for (i
= 0; i
< bank
->bus_width
; i
++)
2036 cfi_add_byte(bank
, current_word
, *buffer
++);
2039 retval
= cfi_write_word(bank
, current_word
, write_p
);
2040 if (retval
!= ERROR_OK
)
2043 write_p
+= bank
->bus_width
;
2044 count
-= bank
->bus_width
;
2052 /* return to read array mode, so we can read from flash again for padding */
2053 cfi_command(bank
, 0xf0, current_word
);
2054 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
)) != ERROR_OK
)
2058 cfi_command(bank
, 0xff, current_word
);
2059 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
)) != ERROR_OK
)
2064 /* handle unaligned tail bytes */
2067 LOG_INFO("Fixup %" PRId32
" unaligned tail bytes", count
);
2070 for (i
= 0; i
< bank
->bus_width
; i
++)
2071 current_word
[i
] = 0;
2073 for (i
= 0; (i
< bank
->bus_width
) && (count
> 0); ++i
, ++copy_p
)
2075 cfi_add_byte(bank
, current_word
, *buffer
++);
2078 for (; i
< bank
->bus_width
; ++i
, ++copy_p
)
2081 if ((retval
= target_read_memory(target
, copy_p
, 1, 1, &byte
)) != ERROR_OK
)
2085 cfi_add_byte(bank
, current_word
, byte
);
2087 retval
= cfi_write_word(bank
, current_word
, write_p
);
2088 if (retval
!= ERROR_OK
)
2092 /* return to read array mode */
2093 cfi_command(bank
, 0xf0, current_word
);
2094 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
)) != ERROR_OK
)
2098 cfi_command(bank
, 0xff, current_word
);
2099 return target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
);
2102 static void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t
*bank
, void *param
)
2105 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2106 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
2108 pri_ext
->_reversed_geometry
= 1;
2111 static void cfi_fixup_0002_erase_regions(flash_bank_t
*bank
, void *param
)
2114 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2115 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
2118 if ((pri_ext
->_reversed_geometry
) || (pri_ext
->TopBottom
== 3))
2120 LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device");
2122 for (i
= 0; i
< cfi_info
->num_erase_regions
/ 2; i
++)
2124 int j
= (cfi_info
->num_erase_regions
- 1) - i
;
2127 swap
= cfi_info
->erase_region_info
[i
];
2128 cfi_info
->erase_region_info
[i
] = cfi_info
->erase_region_info
[j
];
2129 cfi_info
->erase_region_info
[j
] = swap
;
2134 static void cfi_fixup_0002_unlock_addresses(flash_bank_t
*bank
, void *param
)
2136 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2137 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
2138 cfi_unlock_addresses_t
*unlock_addresses
= param
;
2140 pri_ext
->_unlock1
= unlock_addresses
->unlock1
;
2141 pri_ext
->_unlock2
= unlock_addresses
->unlock2
;
2144 static int cfi_probe(struct flash_bank_s
*bank
)
2146 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2147 target_t
*target
= bank
->target
;
2149 int num_sectors
= 0;
2152 uint32_t unlock1
= 0x555;
2153 uint32_t unlock2
= 0x2aa;
2156 if (bank
->target
->state
!= TARGET_HALTED
)
2158 LOG_ERROR("Target not halted");
2159 return ERROR_TARGET_NOT_HALTED
;
2162 cfi_info
->probed
= 0;
2164 /* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
2165 * while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
2167 if (cfi_info
->jedec_probe
)
2173 /* switch to read identifier codes mode ("AUTOSELECT") */
2174 cfi_command(bank
, 0xaa, command
);
2175 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2179 cfi_command(bank
, 0x55, command
);
2180 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, unlock2
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2184 cfi_command(bank
, 0x90, command
);
2185 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2190 if (bank
->chip_width
== 1)
2192 uint8_t manufacturer
, device_id
;
2193 if ((retval
= target_read_u8(target
, flash_address(bank
, 0, 0x00), &manufacturer
)) != ERROR_OK
)
2197 if ((retval
= target_read_u8(target
, flash_address(bank
, 0, 0x01), &device_id
)) != ERROR_OK
)
2201 cfi_info
->manufacturer
= manufacturer
;
2202 cfi_info
->device_id
= device_id
;
2204 else if (bank
->chip_width
== 2)
2206 if ((retval
= target_read_u16(target
, flash_address(bank
, 0, 0x00), &cfi_info
->manufacturer
)) != ERROR_OK
)
2210 if ((retval
= target_read_u16(target
, flash_address(bank
, 0, 0x01), &cfi_info
->device_id
)) != ERROR_OK
)
2216 LOG_INFO("Flash Manufacturer/Device: 0x%04x 0x%04x", cfi_info
->manufacturer
, cfi_info
->device_id
);
2217 /* switch back to read array mode */
2218 cfi_command(bank
, 0xf0, command
);
2219 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x00), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2223 cfi_command(bank
, 0xff, command
);
2224 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x00), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2229 /* check device/manufacturer ID for known non-CFI flashes. */
2230 cfi_fixup_non_cfi(bank
);
2232 /* query only if this is a CFI compatible flash,
2233 * otherwise the relevant info has already been filled in
2235 if (cfi_info
->not_cfi
== 0)
2237 /* enter CFI query mode
2238 * according to JEDEC Standard No. 68.01,
2239 * a single bus sequence with address = 0x55, data = 0x98 should put
2240 * the device into CFI query mode.
2242 * SST flashes clearly violate this, and we will consider them incompatbile for now
2244 cfi_command(bank
, 0x98, command
);
2245 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2250 cfi_info
->qry
[0] = cfi_query_u8(bank
, 0, 0x10);
2251 cfi_info
->qry
[1] = cfi_query_u8(bank
, 0, 0x11);
2252 cfi_info
->qry
[2] = cfi_query_u8(bank
, 0, 0x12);
2254 LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2]);
2256 if ((cfi_info
->qry
[0] != 'Q') || (cfi_info
->qry
[1] != 'R') || (cfi_info
->qry
[2] != 'Y'))
2258 cfi_command(bank
, 0xf0, command
);
2259 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2263 cfi_command(bank
, 0xff, command
);
2264 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2268 LOG_ERROR("Could not probe bank: no QRY");
2269 return ERROR_FLASH_BANK_INVALID
;
2272 cfi_info
->pri_id
= cfi_query_u16(bank
, 0, 0x13);
2273 cfi_info
->pri_addr
= cfi_query_u16(bank
, 0, 0x15);
2274 cfi_info
->alt_id
= cfi_query_u16(bank
, 0, 0x17);
2275 cfi_info
->alt_addr
= cfi_query_u16(bank
, 0, 0x19);
2277 LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2], cfi_info
->pri_id
, cfi_info
->pri_addr
, cfi_info
->alt_id
, cfi_info
->alt_addr
);
2279 cfi_info
->vcc_min
= cfi_query_u8(bank
, 0, 0x1b);
2280 cfi_info
->vcc_max
= cfi_query_u8(bank
, 0, 0x1c);
2281 cfi_info
->vpp_min
= cfi_query_u8(bank
, 0, 0x1d);
2282 cfi_info
->vpp_max
= cfi_query_u8(bank
, 0, 0x1e);
2283 cfi_info
->word_write_timeout_typ
= cfi_query_u8(bank
, 0, 0x1f);
2284 cfi_info
->buf_write_timeout_typ
= cfi_query_u8(bank
, 0, 0x20);
2285 cfi_info
->block_erase_timeout_typ
= cfi_query_u8(bank
, 0, 0x21);
2286 cfi_info
->chip_erase_timeout_typ
= cfi_query_u8(bank
, 0, 0x22);
2287 cfi_info
->word_write_timeout_max
= cfi_query_u8(bank
, 0, 0x23);
2288 cfi_info
->buf_write_timeout_max
= cfi_query_u8(bank
, 0, 0x24);
2289 cfi_info
->block_erase_timeout_max
= cfi_query_u8(bank
, 0, 0x25);
2290 cfi_info
->chip_erase_timeout_max
= cfi_query_u8(bank
, 0, 0x26);
2292 LOG_DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
2293 (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
2294 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
2295 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
2296 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
2297 LOG_DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info
->word_write_timeout_typ
, 1 << cfi_info
->buf_write_timeout_typ
,
2298 1 << cfi_info
->block_erase_timeout_typ
, 1 << cfi_info
->chip_erase_timeout_typ
);
2299 LOG_DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
2300 (1 << cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
2301 (1 << cfi_info
->block_erase_timeout_max
) * (1 << cfi_info
->block_erase_timeout_typ
),
2302 (1 << cfi_info
->chip_erase_timeout_max
) * (1 << cfi_info
->chip_erase_timeout_typ
));
2304 cfi_info
->dev_size
= 1 << cfi_query_u8(bank
, 0, 0x27);
2305 cfi_info
->interface_desc
= cfi_query_u16(bank
, 0, 0x28);
2306 cfi_info
->max_buf_write_size
= cfi_query_u16(bank
, 0, 0x2a);
2307 cfi_info
->num_erase_regions
= cfi_query_u8(bank
, 0, 0x2c);
2309 LOG_DEBUG("size: 0x%" PRIx32
", interface desc: %i, max buffer write size: %x", cfi_info
->dev_size
, cfi_info
->interface_desc
, (1 << cfi_info
->max_buf_write_size
));
2311 if (cfi_info
->num_erase_regions
)
2313 cfi_info
->erase_region_info
= malloc(4 * cfi_info
->num_erase_regions
);
2314 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2316 cfi_info
->erase_region_info
[i
] = cfi_query_u32(bank
, 0, 0x2d + (4 * i
));
2317 LOG_DEBUG("erase region[%i]: %" PRIu32
" blocks of size 0x%" PRIx32
"",
2319 (cfi_info
->erase_region_info
[i
] & 0xffff) + 1,
2320 (cfi_info
->erase_region_info
[i
] >> 16) * 256);
2325 cfi_info
->erase_region_info
= NULL
;
2328 /* We need to read the primary algorithm extended query table before calculating
2329 * the sector layout to be able to apply fixups
2331 switch (cfi_info
->pri_id
)
2333 /* Intel command set (standard and extended) */
2336 cfi_read_intel_pri_ext(bank
);
2338 /* AMD/Spansion, Atmel, ... command set */
2340 cfi_info
->status_poll_mask
= CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7
; /* default for all CFI flashs */
2341 cfi_read_0002_pri_ext(bank
);
2344 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2348 /* return to read array mode
2349 * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
2351 cfi_command(bank
, 0xf0, command
);
2352 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2356 cfi_command(bank
, 0xff, command
);
2357 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2361 } /* end CFI case */
2363 /* apply fixups depending on the primary command set */
2364 switch (cfi_info
->pri_id
)
2366 /* Intel command set (standard and extended) */
2369 cfi_fixup(bank
, cfi_0001_fixups
);
2371 /* AMD/Spansion, Atmel, ... command set */
2373 cfi_fixup(bank
, cfi_0002_fixups
);
2376 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2380 if ((cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
) != bank
->size
)
2382 LOG_WARNING("configuration specifies 0x%" PRIx32
" size, but a 0x%" PRIx32
" size flash was found", bank
->size
, cfi_info
->dev_size
);
2385 if (cfi_info
->num_erase_regions
== 0)
2387 /* a device might have only one erase block, spanning the whole device */
2388 bank
->num_sectors
= 1;
2389 bank
->sectors
= malloc(sizeof(flash_sector_t
));
2391 bank
->sectors
[sector
].offset
= 0x0;
2392 bank
->sectors
[sector
].size
= bank
->size
;
2393 bank
->sectors
[sector
].is_erased
= -1;
2394 bank
->sectors
[sector
].is_protected
= -1;
2398 uint32_t offset
= 0;
2400 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2402 num_sectors
+= (cfi_info
->erase_region_info
[i
] & 0xffff) + 1;
2405 bank
->num_sectors
= num_sectors
;
2406 bank
->sectors
= malloc(sizeof(flash_sector_t
) * num_sectors
);
2408 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2411 for (j
= 0; j
< (cfi_info
->erase_region_info
[i
] & 0xffff) + 1; j
++)
2413 bank
->sectors
[sector
].offset
= offset
;
2414 bank
->sectors
[sector
].size
= ((cfi_info
->erase_region_info
[i
] >> 16) * 256) * bank
->bus_width
/ bank
->chip_width
;
2415 offset
+= bank
->sectors
[sector
].size
;
2416 bank
->sectors
[sector
].is_erased
= -1;
2417 bank
->sectors
[sector
].is_protected
= -1;
2421 if (offset
!= (cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
))
2423 LOG_WARNING("CFI size is 0x%" PRIx32
", but total sector size is 0x%" PRIx32
"", \
2424 (cfi_info
->dev_size
* bank
->bus_width
/ bank
->chip_width
), offset
);
2428 cfi_info
->probed
= 1;
2433 static int cfi_auto_probe(struct flash_bank_s
*bank
)
2435 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2436 if (cfi_info
->probed
)
2438 return cfi_probe(bank
);
2442 static int cfi_intel_protect_check(struct flash_bank_s
*bank
)
2445 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2446 cfi_intel_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
2447 target_t
*target
= bank
->target
;
2448 uint8_t command
[CFI_MAX_BUS_WIDTH
];
2451 /* check if block lock bits are supported on this device */
2452 if (!(pri_ext
->blk_status_reg_mask
& 0x1))
2453 return ERROR_FLASH_OPERATION_FAILED
;
2455 cfi_command(bank
, 0x90, command
);
2456 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2461 for (i
= 0; i
< bank
->num_sectors
; i
++)
2463 uint8_t block_status
= cfi_get_u8(bank
, i
, 0x2);
2465 if (block_status
& 1)
2466 bank
->sectors
[i
].is_protected
= 1;
2468 bank
->sectors
[i
].is_protected
= 0;
2471 cfi_command(bank
, 0xff, command
);
2472 return target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
2475 static int cfi_spansion_protect_check(struct flash_bank_s
*bank
)
2478 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2479 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
2480 target_t
*target
= bank
->target
;
2484 cfi_command(bank
, 0xaa, command
);
2485 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2490 cfi_command(bank
, 0x55, command
);
2491 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2496 cfi_command(bank
, 0x90, command
);
2497 if ((retval
= target_write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
)) != ERROR_OK
)
2502 for (i
= 0; i
< bank
->num_sectors
; i
++)
2504 uint8_t block_status
= cfi_get_u8(bank
, i
, 0x2);
2506 if (block_status
& 1)
2507 bank
->sectors
[i
].is_protected
= 1;
2509 bank
->sectors
[i
].is_protected
= 0;
2512 cfi_command(bank
, 0xf0, command
);
2513 return target_write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
2516 static int cfi_protect_check(struct flash_bank_s
*bank
)
2518 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2520 if (bank
->target
->state
!= TARGET_HALTED
)
2522 LOG_ERROR("Target not halted");
2523 return ERROR_TARGET_NOT_HALTED
;
2526 if (cfi_info
->qry
[0] != 'Q')
2527 return ERROR_FLASH_BANK_NOT_PROBED
;
2529 switch (cfi_info
->pri_id
)
2533 return cfi_intel_protect_check(bank
);
2536 return cfi_spansion_protect_check(bank
);
2539 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2546 static int cfi_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
)
2549 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2551 if (cfi_info
->qry
[0] == (char)-1)
2553 printed
= snprintf(buf
, buf_size
, "\ncfi flash bank not probed yet\n");
2557 if (cfi_info
->not_cfi
== 0)
2558 printed
= snprintf(buf
, buf_size
, "\ncfi information:\n");
2560 printed
= snprintf(buf
, buf_size
, "\nnon-cfi flash:\n");
2562 buf_size
-= printed
;
2564 printed
= snprintf(buf
, buf_size
, "\nmfr: 0x%4.4x, id:0x%4.4x\n",
2565 cfi_info
->manufacturer
, cfi_info
->device_id
);
2567 buf_size
-= printed
;
2569 if (cfi_info
->not_cfi
== 0)
2571 printed
= snprintf(buf
, buf_size
, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2], cfi_info
->pri_id
, cfi_info
->pri_addr
, cfi_info
->alt_id
, cfi_info
->alt_addr
);
2573 buf_size
-= printed
;
2575 printed
= snprintf(buf
, buf_size
, "Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x\n",
2576 (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
2577 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
2578 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
2579 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
2581 buf_size
-= printed
;
2583 printed
= snprintf(buf
, buf_size
, "typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u\n",
2584 1 << cfi_info
->word_write_timeout_typ
,
2585 1 << cfi_info
->buf_write_timeout_typ
,
2586 1 << cfi_info
->block_erase_timeout_typ
,
2587 1 << cfi_info
->chip_erase_timeout_typ
);
2589 buf_size
-= printed
;
2591 printed
= snprintf(buf
, buf_size
, "max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u\n",
2592 (1 << cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
2593 (1 << cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
2594 (1 << cfi_info
->block_erase_timeout_max
) * (1 << cfi_info
->block_erase_timeout_typ
),
2595 (1 << cfi_info
->chip_erase_timeout_max
) * (1 << cfi_info
->chip_erase_timeout_typ
));
2597 buf_size
-= printed
;
2599 printed
= snprintf(buf
, buf_size
, "size: 0x%" PRIx32
", interface desc: %i, max buffer write size: %x\n",
2601 cfi_info
->interface_desc
,
2602 1 << cfi_info
->max_buf_write_size
);
2604 buf_size
-= printed
;
2606 switch (cfi_info
->pri_id
)
2610 cfi_intel_info(bank
, buf
, buf_size
);
2613 cfi_spansion_info(bank
, buf
, buf_size
);
2616 LOG_ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)