- prepare OpenOCD for branching, created ./trunk/
[openocd.git] / doc / configs / arm7_ftd2xx.cfg
1 #daemon configuration
2 telnet_port 4444
3 gdb_port 3333
4
5 #interface
6 interface ftd2xx
7 ftd2xx_device_desc "Amontec JTAGkey A"
8 ftd2xx_layout jtagkey
9 ftd2xx_vid_pid 0x0403 0xcff8
10 jtag_speed 2
11 #use combined on interfaces or targets that can't set TRST/SRST separately
12 reset_config trst_and_srst srst_pulls_trst
13
14 #jtag scan chain
15 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
16 jtag_device 4 0x1 0xf 0xe
17
18 #target configuration
19 daemon_startup reset
20 #target <type> <startup mode>
21 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
22 target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
23 target_script 0 reset h2294_init.script
24 run_and_halt_time 0 30
25 working_area 0 0x40000000 0x40000 nobackup
26
27 #flash configuration
28 flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
29 flash bank cfi 0x80000000 0x400000 2 2 0