1 /***************************************************************************
2 * Copyright (C) 2006 by Magnus Lundin *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
20 ***************************************************************************/
22 #ifndef OPENOCD_TARGET_ARM_ADI_V5_H
23 #define OPENOCD_TARGET_ARM_ADI_V5_H
27 * This defines formats and data structures used to talk to ADIv5 entities.
28 * Those include a DAP, different types of Debug Port (DP), and memory mapped
29 * resources accessed through a MEM-AP.
32 #include <helper/list.h>
35 /* three-bit ACK values for SWD access (sent LSB first) */
36 #define SWD_ACK_OK 0x1
37 #define SWD_ACK_WAIT 0x2
38 #define SWD_ACK_FAULT 0x4
43 #define BANK_REG(bank, reg) (((bank) << 4) | (reg))
45 /* A[3:0] for DP registers; A[1:0] are always zero.
46 * - JTAG accesses all of these via JTAG_DP_DPACC, except for
47 * IDCODE (JTAG_DP_IDCODE) and ABORT (JTAG_DP_ABORT).
48 * - SWD accesses these directly, sometimes needing SELECT.DPBANKSEL
50 #define DP_DPIDR BANK_REG(0x0, 0x0) /* DPv1+: ro */
51 #define DP_ABORT BANK_REG(0x0, 0x0) /* DPv1+: SWD: wo */
52 #define DP_CTRL_STAT BANK_REG(0x0, 0x4) /* DPv0+: rw */
53 #define DP_DLCR BANK_REG(0x1, 0x4) /* DPv1+: SWD: rw */
54 #define DP_TARGETID BANK_REG(0x2, 0x4) /* DPv2: ro */
55 #define DP_DLPIDR BANK_REG(0x3, 0x4) /* DPv2: ro */
56 #define DP_EVENTSTAT BANK_REG(0x4, 0x4) /* DPv2: ro */
57 #define DP_RESEND BANK_REG(0x0, 0x8) /* DPv1+: SWD: ro */
58 #define DP_SELECT BANK_REG(0x0, 0x8) /* DPv0+: JTAG: rw; SWD: wo */
59 #define DP_RDBUFF BANK_REG(0x0, 0xC) /* DPv0+: ro */
60 #define DP_TARGETSEL BANK_REG(0x0, 0xC) /* DPv2: SWD: wo */
62 #define DLCR_TO_TRN(dlcr) ((uint32_t)(1 + ((3 & (dlcr)) >> 8))) /* 1..4 clocks */
64 /* Fields of the DP's AP ABORT register */
65 #define DAPABORT (1UL << 0)
66 #define STKCMPCLR (1UL << 1) /* SWD-only */
67 #define STKERRCLR (1UL << 2) /* SWD-only */
68 #define WDERRCLR (1UL << 3) /* SWD-only */
69 #define ORUNERRCLR (1UL << 4) /* SWD-only */
71 /* Fields of the DP's CTRL/STAT register */
72 #define CORUNDETECT (1UL << 0)
73 #define SSTICKYORUN (1UL << 1)
74 /* 3:2 - transaction mode (e.g. pushed compare) */
75 #define SSTICKYCMP (1UL << 4)
76 #define SSTICKYERR (1UL << 5)
77 #define READOK (1UL << 6) /* SWD-only */
78 #define WDATAERR (1UL << 7) /* SWD-only */
79 /* 11:8 - mask lanes for pushed compare or verify ops */
80 /* 21:12 - transaction counter */
81 #define CDBGRSTREQ (1UL << 26)
82 #define CDBGRSTACK (1UL << 27)
83 #define CDBGPWRUPREQ (1UL << 28)
84 #define CDBGPWRUPACK (1UL << 29)
85 #define CSYSPWRUPREQ (1UL << 30)
86 #define CSYSPWRUPACK (1UL << 31)
88 /* MEM-AP register addresses */
89 #define MEM_AP_REG_CSW 0x00
90 #define MEM_AP_REG_TAR 0x04
91 #define MEM_AP_REG_TAR64 0x08 /* RW: Large Physical Address Extension */
92 #define MEM_AP_REG_DRW 0x0C /* RW: Data Read/Write register */
93 #define MEM_AP_REG_BD0 0x10 /* RW: Banked Data register 0-3 */
94 #define MEM_AP_REG_BD1 0x14
95 #define MEM_AP_REG_BD2 0x18
96 #define MEM_AP_REG_BD3 0x1C
97 #define MEM_AP_REG_MBT 0x20 /* --: Memory Barrier Transfer register */
98 #define MEM_AP_REG_BASE64 0xF0 /* RO: Debug Base Address (LA) register */
99 #define MEM_AP_REG_CFG 0xF4 /* RO: Configuration register */
100 #define MEM_AP_REG_BASE 0xF8 /* RO: Debug Base Address register */
101 /* Generic AP register address */
102 #define AP_REG_IDR 0xFC /* RO: Identification Register */
104 /* Fields of the MEM-AP's CSW register */
105 #define CSW_SIZE_MASK 7
109 #define CSW_ADDRINC_MASK (3UL << 4)
110 #define CSW_ADDRINC_OFF 0UL
111 #define CSW_ADDRINC_SINGLE (1UL << 4)
112 #define CSW_ADDRINC_PACKED (2UL << 4)
113 #define CSW_DEVICE_EN (1UL << 6)
114 #define CSW_TRIN_PROG (1UL << 7)
115 /* all fields in bits 12 and above are implementation-defined! */
116 #define CSW_SPIDEN (1UL << 23)
117 #define CSW_HPROT1 (1UL << 25) /* AHB: Privileged */
118 #define CSW_MASTER_DEBUG (1UL << 29) /* AHB: set HMASTER signals to AHB-AP ID */
119 #define CSW_SPROT (1UL << 30)
120 #define CSW_DBGSWENABLE (1UL << 31)
122 /* initial value of csw_default used for MEM-AP transfers */
123 #define CSW_DEFAULT (CSW_HPROT1 | CSW_MASTER_DEBUG | CSW_DBGSWENABLE)
125 /* Fields of the MEM-AP's IDR register */
126 #define IDR_REV (0xFUL << 28)
127 #define IDR_JEP106 (0x7FFUL << 17)
128 #define IDR_CLASS (0xFUL << 13)
129 #define IDR_VARIANT (0xFUL << 4)
130 #define IDR_TYPE (0xFUL << 0)
132 #define IDR_JEP106_ARM 0x04760000
134 #define DP_SELECT_APSEL 0xFF000000
135 #define DP_SELECT_APBANK 0x000000F0
136 #define DP_SELECT_DPBANK 0x0000000F
137 #define DP_SELECT_INVALID 0x00FFFF00 /* Reserved bits one */
139 #define DP_APSEL_MAX (255)
140 #define DP_APSEL_INVALID (-1)
143 * This represents an ARM Debug Interface (v5) Access Port (AP).
144 * Most common is a MEM-AP, for memory access.
148 * DAP this AP belongs to.
150 struct adiv5_dap
*dap
;
158 * Default value for (MEM-AP) AP_REG_CSW register.
160 uint32_t csw_default
;
163 * Cache for (MEM-AP) AP_REG_CSW register value. This is written to
164 * configure an access mode, such as autoincrementing AP_REG_TAR during
165 * word access. "-1" indicates no cached value.
170 * Cache for (MEM-AP) AP_REG_TAR register value This is written to
171 * configure the address being read or written
172 * "-1" indicates no cached value.
177 * Configures how many extra tck clocks are added after starting a
178 * MEM-AP access before we try to read its status (and/or result).
180 uint32_t memaccess_tck
;
182 /* Size of TAR autoincrement block, ARM ADI Specification requires at least 10 bits */
183 uint32_t tar_autoincr_block
;
185 /* true if packed transfers are supported by the MEM-AP */
186 bool packed_transfers
;
188 /* true if unaligned memory access is not supported by the MEM-AP */
189 bool unaligned_access_bad
;
191 /* true if tar_value is in sync with TAR register */
197 * This represents an ARM Debug Interface (v5) Debug Access Port (DAP).
198 * A DAP has two types of component: one Debug Port (DP), which is a
199 * transport agent; and at least one Access Port (AP), controlling
202 * There are two basic DP transports: JTAG, and ARM's low pin-count SWD.
203 * Accordingly, this interface is responsible for hiding the transport
204 * differences so upper layer code can largely ignore them.
206 * When the chip is implemented with JTAG-DP or SW-DP, the transport is
207 * fixed as JTAG or SWD, respectively. Chips incorporating SWJ-DP permit
208 * a choice made at board design time (by only using the SWD pins), or
209 * as part of setting up a debug session (if all the dual-role JTAG/SWD
210 * signals are available).
213 const struct dap_ops
*ops
;
215 /* dap transaction list for WAIT support */
216 struct list_head cmd_journal
;
218 struct jtag_tap
*tap
;
220 uint32_t dp_ctrl_stat
;
222 struct adiv5_ap ap
[256];
224 /* The current manually selected AP by the "dap apsel" command */
228 * Cache for DP_SELECT register. A value of DP_SELECT_INVALID
229 * indicates no cached value and forces rewrite of the register.
233 /* information about current pending SWjDP-AHBAP transaction */
237 * Holds the pointer to the destination word for the last queued read,
238 * for use with posted AP read sequence optimization.
242 /* The TI TMS470 and TMS570 series processors use a BE-32 memory ordering
243 * despite lack of support in the ARMv7 architecture. Memory access through
244 * the AHB-AP has strange byte ordering these processors, and we need to
245 * swizzle appropriately. */
246 bool ti_be_32_quirks
;
249 * Signals that an attempt to reestablish communication afresh
250 * should be performed before the next access.
254 /** Flag saying whether to ignore the syspwrupack flag in DAP. Some devices
255 * do not set this bit until later in the bringup sequence */
256 bool ignore_syspwrupack
;
260 * Transport-neutral representation of queued DAP transactions, supporting
261 * both JTAG and SWD transports. All submitted transactions are logically
262 * queued, until the queue is executed by run(). Some implementations might
263 * execute transactions as soon as they're submitted, but no status is made
264 * available until run().
267 /** connect operation for SWD */
268 int (*connect
)(struct adiv5_dap
*dap
);
269 /** DP register read. */
270 int (*queue_dp_read
)(struct adiv5_dap
*dap
, unsigned reg
,
272 /** DP register write. */
273 int (*queue_dp_write
)(struct adiv5_dap
*dap
, unsigned reg
,
276 /** AP register read. */
277 int (*queue_ap_read
)(struct adiv5_ap
*ap
, unsigned reg
,
279 /** AP register write. */
280 int (*queue_ap_write
)(struct adiv5_ap
*ap
, unsigned reg
,
283 /** AP operation abort. */
284 int (*queue_ap_abort
)(struct adiv5_dap
*dap
, uint8_t *ack
);
286 /** Executes all queued DAP operations. */
287 int (*run
)(struct adiv5_dap
*dap
);
289 /** Executes all queued DAP operations but doesn't check
290 * sticky error conditions */
291 int (*sync
)(struct adiv5_dap
*dap
);
293 /** Optional; called at OpenOCD exit */
294 void (*quit
)(struct adiv5_dap
*dap
);
298 * Access Port classes
301 AP_CLASS_NONE
= 0x00000, /* No class defined */
302 AP_CLASS_MEM_AP
= 0x10000, /* MEM-AP */
309 AP_TYPE_JTAG_AP
= 0x0, /* JTAG-AP - JTAG master for controlling other JTAG devices */
310 AP_TYPE_AHB_AP
= 0x1, /* AHB Memory-AP */
311 AP_TYPE_APB_AP
= 0x2, /* APB Memory-AP */
312 AP_TYPE_AXI_AP
= 0x4, /* AXI Memory-AP */
316 * Queue a DP register read.
317 * Note that not all DP registers are readable; also, that JTAG and SWD
318 * have slight differences in DP register support.
320 * @param dap The DAP used for reading.
321 * @param reg The two-bit number of the DP register being read.
322 * @param data Pointer saying where to store the register's value
323 * (in host endianness).
325 * @return ERROR_OK for success, else a fault code.
327 static inline int dap_queue_dp_read(struct adiv5_dap
*dap
,
328 unsigned reg
, uint32_t *data
)
330 assert(dap
->ops
!= NULL
);
331 return dap
->ops
->queue_dp_read(dap
, reg
, data
);
335 * Queue a DP register write.
336 * Note that not all DP registers are writable; also, that JTAG and SWD
337 * have slight differences in DP register support.
339 * @param dap The DAP used for writing.
340 * @param reg The two-bit number of the DP register being written.
341 * @param data Value being written (host endianness)
343 * @return ERROR_OK for success, else a fault code.
345 static inline int dap_queue_dp_write(struct adiv5_dap
*dap
,
346 unsigned reg
, uint32_t data
)
348 assert(dap
->ops
!= NULL
);
349 return dap
->ops
->queue_dp_write(dap
, reg
, data
);
353 * Queue an AP register read.
355 * @param ap The AP used for reading.
356 * @param reg The number of the AP register being read.
357 * @param data Pointer saying where to store the register's value
358 * (in host endianness).
360 * @return ERROR_OK for success, else a fault code.
362 static inline int dap_queue_ap_read(struct adiv5_ap
*ap
,
363 unsigned reg
, uint32_t *data
)
365 assert(ap
->dap
->ops
!= NULL
);
366 return ap
->dap
->ops
->queue_ap_read(ap
, reg
, data
);
370 * Queue an AP register write.
372 * @param ap The AP used for writing.
373 * @param reg The number of the AP register being written.
374 * @param data Value being written (host endianness)
376 * @return ERROR_OK for success, else a fault code.
378 static inline int dap_queue_ap_write(struct adiv5_ap
*ap
,
379 unsigned reg
, uint32_t data
)
381 assert(ap
->dap
->ops
!= NULL
);
382 return ap
->dap
->ops
->queue_ap_write(ap
, reg
, data
);
386 * Queue an AP abort operation. The current AP transaction is aborted,
387 * including any update of the transaction counter. The AP is left in
388 * an unknown state (so it must be re-initialized). For use only after
389 * the AP has reported WAIT status for an extended period.
391 * @param dap The DAP used for writing.
392 * @param ack Pointer to where transaction status will be stored.
394 * @return ERROR_OK for success, else a fault code.
396 static inline int dap_queue_ap_abort(struct adiv5_dap
*dap
, uint8_t *ack
)
398 assert(dap
->ops
!= NULL
);
399 return dap
->ops
->queue_ap_abort(dap
, ack
);
403 * Perform all queued DAP operations, and clear any errors posted in the
404 * CTRL_STAT register when they are done. Note that if more than one AP
405 * operation will be queued, one of the first operations in the queue
406 * should probably enable CORUNDETECT in the CTRL/STAT register.
408 * @param dap The DAP used.
410 * @return ERROR_OK for success, else a fault code.
412 static inline int dap_run(struct adiv5_dap
*dap
)
414 assert(dap
->ops
!= NULL
);
415 return dap
->ops
->run(dap
);
418 static inline int dap_sync(struct adiv5_dap
*dap
)
420 assert(dap
->ops
!= NULL
);
422 return dap
->ops
->sync(dap
);
426 static inline int dap_dp_read_atomic(struct adiv5_dap
*dap
, unsigned reg
,
431 retval
= dap_queue_dp_read(dap
, reg
, value
);
432 if (retval
!= ERROR_OK
)
438 static inline int dap_dp_poll_register(struct adiv5_dap
*dap
, unsigned reg
,
439 uint32_t mask
, uint32_t value
, int timeout
)
442 assert((value
& mask
) == value
);
446 LOG_DEBUG("DAP: poll %x, mask 0x%08" PRIx32
", value 0x%08" PRIx32
,
449 ret
= dap_dp_read_atomic(dap
, reg
, ®val
);
453 if ((regval
& mask
) == value
)
460 LOG_DEBUG("DAP: poll %x timeout", reg
);
467 /* Queued MEM-AP memory mapped single word transfers. */
468 int mem_ap_read_u32(struct adiv5_ap
*ap
,
469 uint32_t address
, uint32_t *value
);
470 int mem_ap_write_u32(struct adiv5_ap
*ap
,
471 uint32_t address
, uint32_t value
);
473 /* Synchronous MEM-AP memory mapped single word transfers. */
474 int mem_ap_read_atomic_u32(struct adiv5_ap
*ap
,
475 uint32_t address
, uint32_t *value
);
476 int mem_ap_write_atomic_u32(struct adiv5_ap
*ap
,
477 uint32_t address
, uint32_t value
);
479 /* Synchronous MEM-AP memory mapped bus block transfers. */
480 int mem_ap_read_buf(struct adiv5_ap
*ap
,
481 uint8_t *buffer
, uint32_t size
, uint32_t count
, uint32_t address
);
482 int mem_ap_write_buf(struct adiv5_ap
*ap
,
483 const uint8_t *buffer
, uint32_t size
, uint32_t count
, uint32_t address
);
485 /* Synchronous, non-incrementing buffer functions for accessing fifos. */
486 int mem_ap_read_buf_noincr(struct adiv5_ap
*ap
,
487 uint8_t *buffer
, uint32_t size
, uint32_t count
, uint32_t address
);
488 int mem_ap_write_buf_noincr(struct adiv5_ap
*ap
,
489 const uint8_t *buffer
, uint32_t size
, uint32_t count
, uint32_t address
);
491 /* Initialisation of the debug system, power domains and registers */
492 int dap_dp_init(struct adiv5_dap
*dap
);
493 int mem_ap_init(struct adiv5_ap
*ap
);
495 /* Invalidate cached DP select and cached TAR and CSW of all APs */
496 void dap_invalidate_cache(struct adiv5_dap
*dap
);
498 /* Probe the AP for ROM Table location */
499 int dap_get_debugbase(struct adiv5_ap
*ap
,
500 uint32_t *dbgbase
, uint32_t *apid
);
502 /* Probe Access Ports to find a particular type */
503 int dap_find_ap(struct adiv5_dap
*dap
,
504 enum ap_type type_to_find
,
505 struct adiv5_ap
**ap_out
);
507 static inline struct adiv5_ap
*dap_ap(struct adiv5_dap
*dap
, uint8_t ap_num
)
509 return &dap
->ap
[ap_num
];
512 /* Lookup CoreSight component */
513 int dap_lookup_cs_component(struct adiv5_ap
*ap
,
514 uint32_t dbgbase
, uint8_t type
, uint32_t *addr
, int32_t *idx
);
518 /* Put debug link into SWD mode */
519 int dap_to_swd(struct adiv5_dap
*dap
);
521 /* Put debug link into JTAG mode */
522 int dap_to_jtag(struct adiv5_dap
*dap
);
524 extern const struct command_registration dap_instance_commands
[];
526 struct arm_dap_object
;
527 extern struct adiv5_dap
*dap_instance_by_jim_obj(Jim_Interp
*interp
, Jim_Obj
*o
);
528 extern struct adiv5_dap
*adiv5_get_dap(struct arm_dap_object
*obj
);
529 extern int dap_info_command(struct command_invocation
*cmd
,
530 struct adiv5_ap
*ap
);
531 extern int dap_register_commands(struct command_context
*cmd_ctx
);
532 extern const char *adiv5_dap_name(struct adiv5_dap
*self
);
533 extern const struct swd_driver
*adiv5_dap_swd_driver(struct adiv5_dap
*self
);
534 extern int dap_cleanup_all(void);
536 struct adiv5_private_config
{
538 struct adiv5_dap
*dap
;
541 extern int adiv5_verify_config(struct adiv5_private_config
*pc
);
542 extern int adiv5_jim_configure(struct target
*target
, Jim_GetOptInfo
*goi
);
544 #endif /* OPENOCD_TARGET_ARM_ADI_V5_H */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)