tcl: replace the deprecated commands with "adapter ..."

[openocd.git] / tcl / target / nrf52.cfg

diff --git a/tcl/target/nrf52.cfg b/tcl/target/nrf52.cfg
index c1cbf1a21de711c844d232433f00ef6e6ed5cf4e..00901bf8acf33c751724079c885cc392e64cb355 100644 (file)
--- a/tcl/target/nrf52.cfg
+++ b/tcl/target/nrf52.cfg
@@ -10,6 +10,14 @@ if { [info exists CHIPNAME] } {
        set _CHIPNAME nrf52
 }
 
+# Work-area is a space in RAM used for flash programming
+# By default use 16kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x4000
+}
+
 if { [info exists CPUTAPID] } {
        set _CPUTAPID $CPUTAPID
 } else {
@@ -17,12 +25,18 @@ if { [info exists CPUTAPID] } {
 }
 
 swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
 
-adapter_khz 10000
+adapter speed 1000
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
 if { ![using_hla] } {
        cortex_m reset_config sysresetreq
 }
+
+flash bank $_CHIPNAME.flash nrf5 0x00000000 0 1 1 $_TARGETNAME
+flash bank $_CHIPNAME.uicr nrf5 0x10001000 0 1 1 $_TARGETNAME