target: Remove "-variant" argument

[openocd.git] / tcl / target / kl25.cfg

diff --git a/tcl/target/kl25.cfg b/tcl/target/kl25.cfg
index 2ed6b0f17b1957c3dab268f06d96c5adfa029d11..7b14ecc8ec17a25dc496ae2ba16854a271d4c748 100644 (file)
--- a/tcl/target/kl25.cfg
+++ b/tcl/target/kl25.cfg
@@ -51,6 +51,19 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
+# specifies up to 1MHz for VLPR mode.
+adapter_khz 1000
+
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}
+
+$_TARGETNAME configure -event reset-init {
+    # Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
+    # specifies up to 24MHz for run mode; Table 17 of Sub-Family Data
+    # Sheet rev4 lists 25MHz as the maximum frequency.
+    adapter_khz 24000
+}