mdr32fx: support for Milandr's MDR32Fx internal flash memory

[openocd.git] / tcl / target / imx35.cfg

diff --git a/tcl/target/imx35.cfg b/tcl/target/imx35.cfg
index d47abdc69208ef88bec435ac30183838ebed739e..21495c23ccfa7e7fba28f46206e2a5a8b2f853bc 100644 (file)
--- a/tcl/target/imx35.cfg
+++ b/tcl/target/imx35.cfg
@@ -2,32 +2,33 @@
 #
 
 reset_config trst_and_srst srst_gates_jtag
+jtag_ntrst_delay 100
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME imx35
+   set _CHIPNAME imx35
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x07b3601d
 }
 
-if { [info exists SDMATAPID ] } {
+if { [info exists SDMATAPID] } {
    set _SDMATAPID $SDMATAPID
 } else {
    set _SDMATAPID 0x0882601d
 }
 
-if { [info exists ETBTAPID ] } {
+if { [info exists ETBTAPID] } {
    set _ETBTAPID $ETBTAPID
 } else {
    set _ETBTAPID 0x2b900f0f
@@ -46,8 +47,8 @@ jtag newtap $_CHIPNAME smda -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
-proc power_restore {} { puts "Sensed power restore. No action." }
-proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }
+proc power_restore {} { echo "Sensed power restore. No action." }
+proc srst_deasserted {} { echo "Sensed nSRST deasserted. No action." }
 
 # trace setup ... NOTE, "normal full" mode fudges the real ETMv3.1 mode
 etm config $_TARGETNAME 16 normal full etb