ARM: "armv4_5" command prefix becomes "arm"

[openocd.git] / tcl / target / at91sam9260_ext_RAM_ext_flash.cfg

diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
index f10a021c8de68f01f19ed48d332e4de923feae31..de7e9ab228e4a04f75cc2b32ffea59155c28ad3e 100644 (file)
--- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
+++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
@@ -8,15 +8,15 @@ jtag_khz 4
 # Target:    Atmel AT91SAM9260
 ######################################
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME at91sam9260
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -41,13 +41,13 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 # Target configuration
 ######################
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
 
 $_TARGETNAME invoke-event halted
 
 # Internal sram1 memory
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
+$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
 
 scan_chain
 $_TARGETNAME configure -event reset-deassert-post {at91sam_init}
@@ -59,7 +59,7 @@ flash bank cfi 0x10000000 0x01000000 2 2 $_TARGETNAME
 
 
 proc at91sam_init { } {
-       
+
        # at reset chip runs at 32khz
        jtag_khz 8
        halt