Remove annoying end-of-line whitespace from tcl/* files

[openocd.git] / tcl / board / zy1000.cfg

diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg
index d8bb46502f74c2186d68bfe731228c97f61a35fd..07f5ee99482a7e630ff6068dbee54a93af95d9b8 100644 (file)
--- a/tcl/board/zy1000.cfg
+++ b/tcl/board/zy1000.cfg
@@ -10,19 +10,19 @@
 reset_config srst_only srst_pulls_trst
 
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME zy1000
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
- 
+
 #jtag scan chain
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
@@ -39,7 +39,7 @@ arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
 flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
-$_TARGETNAME configure -event reset-init { 
+$_TARGETNAME configure -event reset-init {
        # Set up chip selects & timings
        mww 0xFFE00000 0x0100273D
        mww 0xFFE00004 0x08002125
@@ -51,12 +51,12 @@ $_TARGETNAME configure -event reset-init {
        mww 0xFFE0001c 0x70000000
        mww 0xFFE00020 0x00000001
        mww 0xFFE00024 0x00000000
-       
-       # remap  
-       mww 0xFFFFF124 0xFFFFFFFF  
+
+       # remap
+       mww 0xFFFFF124 0xFFFFFFFF
        mww 0xffff0010 0x100
        mww 0xffff0034 0x100
-       
+
        #disable 16x5x UART interrupts
        mww 0x08020004 0
 }
@@ -75,7 +75,7 @@ proc production_info {} {
 # There is no return value from this procedure. If it is
 # successful it does not throw an exception
 #
-# Progress messages are output via puts 
+# Progress messages are output via puts
 proc production {firmwarefile serialnumber} {
        if {[string length $serialnumber]!=12} {
                puts "Invalid serial number"
@@ -92,11 +92,11 @@ proc production {firmwarefile serialnumber} {
        verify_image $firmwarefile 0x1000000 bin
 
        # Big endian... weee!!!!
-       puts "Setting MAC number to $serialnumber"      
+       puts "Setting MAC number to $serialnumber"
        flash fillw [expr 0x1030000-0x8] "0x[string range $serialnumber 2 3][string range $serialnumber 0 1]0000" 1
        flash fillw [expr 0x1030000-0x4] "0x[string range $serialnumber 10 11][string range $serialnumber 8 9][string range $serialnumber 6 7][string range $serialnumber 4 5]" 1
        puts "Production successful"
-} 
+}
 
 
 proc production_test {} {