Rick Altherr <kc8apf@kc8apf.net> switch to new syntax for target events

[openocd.git] / src / target / target / sam7x256.cfg

diff --git a/src/target/target/sam7x256.cfg b/src/target/target/sam7x256.cfg
index 34556f87c0aad6606e519f9199226763dfbe82d3..d7e11ff32dfde08252148250451793ff37072661 100644 (file)
--- a/src/target/target/sam7x256.cfg
+++ b/src/target/target/sam7x256.cfg
@@ -5,12 +5,27 @@ reset_config srst_only srst_pulls_trst
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 4 0x1 0xf 0xe
 
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
-[new_target_name] configure -event old-post_reset { script event/sam7x256_reset.script }
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -event reset-init { 
+       # disable watchdog
+       mww 0xfffffd44 0x00008000       
+       # enable user reset
+       mww 0xfffffd08 0xa5000001       
+       # CKGR_MOR : enable the main oscillator
+       mww 0xfffffc20 0x00000601       
+       sleep 10
+       # CKGR_PLLR: 96.1097 MHz
+       mww 0xfffffc2c 0x00481c0e       
+       sleep 10
+       # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
+       mww 0xfffffc30 0x00000007       
+       sleep 10
+       # MC_FMR: flash mode (FWS=1,FMCN=60)
+       mww 0xffffff60 0x003c0100       
+       sleep 100
+}
 
-working_area 0 0x00200000 0x4000 nobackup
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank at91sam7 0 0 0 0 0