- u8 *backup;
- struct working_area_s **user;
- struct working_area_s *next;
-} working_area_t;
-
-typedef struct target_type_s
-{
- char *name;
-
- int examined;
-
- /* poll current target status */
- int (*poll)(struct target_s *target);
- /* Invoked only from target_arch_state().
- * Issue USER() w/architecture specific status. */
- int (*arch_state)(struct target_s *target);
-
- /* target request support */
- int (*target_request_data)(struct target_s *target, u32 size, u8 *buffer);
-
- /* halt will log a warning, but return ERROR_OK if the target is already halted. */
- int (*halt)(struct target_s *target);
- int (*resume)(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution);
- int (*step)(struct target_s *target, int current, u32 address, int handle_breakpoints);
-
- /* target reset control. assert reset can be invoked when OpenOCD and
- * the target is out of sync.
- *
- * A typical example is that the target was power cycled while OpenOCD
- * thought the target was halted or running.
- *
- * assert_reset() can therefore make no assumptions whatsoever about the
- * state of the target
- *
- * Before assert_reset() for the target is invoked, a TRST/tms and
- * chain validation is executed. TRST should not be asserted
- * during target assert unless there is no way around it due to
- * the way reset's are configured.
- *
- */
- int (*assert_reset)(struct target_s *target);
- int (*deassert_reset)(struct target_s *target);
- int (*soft_reset_halt_imp)(struct target_s *target);
- int (*soft_reset_halt)(struct target_s *target);
-
- /* target register access for gdb.
- *
- * Danger! this function will succeed even if the target is running
- * and return a register list with dummy values.
- *
- * The reason is that GDB connection will fail without a valid register
- * list, however it is after GDB is connected that monitor commands can
- * be run to properly initialize the target
- */
- int (*get_gdb_reg_list)(struct target_s *target, struct reg_s **reg_list[], int *reg_list_size);
-
- /* target memory access
- * size: 1 = byte (8bit), 2 = half-word (16bit), 4 = word (32bit)
- * count: number of items of <size>
- */
- int (*read_memory_imp)(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
- int (*read_memory)(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
- int (*write_memory_imp)(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
- int (*write_memory)(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
-
- /* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
- int (*bulk_write_memory)(struct target_s *target, u32 address, u32 count, u8 *buffer);
-
- int (*checksum_memory)(struct target_s *target, u32 address, u32 count, u32* checksum);
- int (*blank_check_memory)(struct target_s *target, u32 address, u32 count, u32* blank);
-
- /* target break-/watchpoint control
- * rw: 0 = write, 1 = read, 2 = access
- */
- int (*add_breakpoint)(struct target_s *target, breakpoint_t *breakpoint);
- int (*remove_breakpoint)(struct target_s *target, breakpoint_t *breakpoint);
- int (*add_watchpoint)(struct target_s *target, watchpoint_t *watchpoint);
- int (*remove_watchpoint)(struct target_s *target, watchpoint_t *watchpoint);
-
- /* target algorithm support */
- int (*run_algorithm_imp)(struct target_s *target, int num_mem_params, mem_param_t *mem_params, int num_reg_params, reg_param_t *reg_param, u32 entry_point, u32 exit_point, int timeout_ms, void *arch_info);
- int (*run_algorithm)(struct target_s *target, int num_mem_params, mem_param_t *mem_params, int num_reg_params, reg_param_t *reg_param, u32 entry_point, u32 exit_point, int timeout_ms, void *arch_info);
-
- int (*register_commands)(struct command_context_s *cmd_ctx);
- int (*target_command)(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct target_s *target);
- /* invoked after JTAG chain has been examined & validated. During
- * this stage the target is examined and any additional setup is
- * performed.
- *
- * invoked every time after the jtag chain has been validated/examined
- */
- int (*examine)(struct command_context_s *cmd_ctx, struct target_s *target);
- /* Set up structures for target.
- *
- * It is illegal to talk to the target at this stage as this fn is invoked
- * before the JTAG chain has been examined/verified
- */
- int (*init_target)(struct command_context_s *cmd_ctx, struct target_s *target);
- int (*quit)(void);
-
- int (*virt2phys)(struct target_s *target, u32 address, u32 *physical);
- int (*mmu)(struct target_s *target, int *enabled);
-
-} target_type_t;