stm32: determine all cpu types and use common examine

[openocd.git] / src / target / stm32_stlink.c

diff --git a/src/target/stm32_stlink.c b/src/target/stm32_stlink.c
index 171cc83c65228c5eaeba5dc29d00e013cc919f2b..64e83f534e6346d03b55befbef071fecc72e03d0 100644 (file)
--- a/src/target/stm32_stlink.c
+++ b/src/target/stm32_stlink.c
@@ -245,66 +245,6 @@ static int stm32_stlink_target_create(struct target *target,
        return ERROR_OK;
 }
 
-static int stm32_stlink_examine(struct target *target)
-{
-       int retval, i;
-       uint32_t cpuid, fpcr;
-       struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
-
-       LOG_DEBUG("%s", __func__);
-
-       if (target->tap->hasidcode == false) {
-               LOG_ERROR("no IDCODE present on device");
-
-               return ERROR_COMMAND_SYNTAX_ERROR;
-       }
-
-       if (!target_was_examined(target)) {
-               target_set_examined(target);
-
-               LOG_INFO("IDCODE %x", target->tap->idcode);
-
-               /* Read from Device Identification Registers */
-               retval = target_read_u32(target, CPUID, &cpuid);
-               if (retval != ERROR_OK)
-                       return retval;
-
-               if (((cpuid >> 4) & 0xc3f) == 0xc23)
-                       LOG_DEBUG("Cortex-M3 r%" PRId8 "p%" PRId8 " processor detected",
-                               (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
-               LOG_DEBUG("cpuid: 0x%8.8" PRIx32 "", cpuid);
-
-               /* Setup FPB */
-               target_read_u32(target, FP_CTRL, &fpcr);
-               cortex_m3->auto_bp_type = 1;
-               cortex_m3->fp_num_code = ((fpcr >> 8) & 0x70) |
-                       ((fpcr >> 4) & 0xF); /* bits [14:12] and [7:4] */
-               cortex_m3->fp_num_lit = (fpcr >> 8) & 0xF;
-               cortex_m3->fp_code_available = cortex_m3->fp_num_code;
-               cortex_m3->fp_comparator_list = calloc(cortex_m3->fp_num_code +
-                       cortex_m3->fp_num_lit, sizeof(struct cortex_m3_fp_comparator));
-               cortex_m3->fpb_enabled = fpcr & 1;
-               for (i = 0; i < cortex_m3->fp_num_code + cortex_m3->fp_num_lit; i++) {
-                       cortex_m3->fp_comparator_list[i].type =
-                               (i < cortex_m3->fp_num_code) ? FPCR_CODE : FPCR_LITERAL;
-                       cortex_m3->fp_comparator_list[i].fpcr_address = FP_COMP0 + 4 * i;
-               }
-               LOG_DEBUG("FPB fpcr 0x%" PRIx32 ", numcode %i, numlit %i", fpcr,
-                       cortex_m3->fp_num_code, cortex_m3->fp_num_lit);
-
-               /* Setup DWT */
-               cortex_m3_dwt_setup(cortex_m3, target);
-
-               /* These hardware breakpoints only work for code in flash! */
-               LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
-                               target_name(target),
-                               cortex_m3->fp_num_code,
-                               cortex_m3->dwt_num_comp);
-       }
-
-       return ERROR_OK;
-}
-
 static int stm32_stlink_load_context(struct target *target)
 {
        struct armv7m_common *armv7m = target_to_armv7m(target);
@@ -723,7 +663,7 @@ struct target_type stm32_stlink_target = {
 
        .init_target = stm32_stlink_init_target,
        .target_create = stm32_stlink_target_create,
-       .examine = stm32_stlink_examine,
+       .examine = cortex_m3_examine,
 
        .poll = stm32_stlink_poll,
        .arch_state = armv7m_arch_state,